Database Users

iGate 1.0 Beta test needed!

Dear All:
We need test for our new products on Windows Mobile 6.0 and 6.1 devices.
iGate is small piece of software to replace system idle screen,
When you active system password and after device unused for predefined time, the idle screen will appear. Simply, iGate replace this screen and show iGate screen with necessary information as:
- Unread Mail
- Unread SMS
- Misscall
- Battery status
- Battery and signal levels
- Nearest appointment
- Owner Information
- Able to call to emergency number
Please follow below steps to test iGate:
Currently, iGate is working on Windows Mobile 6.0 or 6.1 only
1. Disable System’s password
2. Download iGate at:http://www.ppclink.com/download.php?id=1
3. Install iGate to your device, After installing please go to Start menu>> programs folder and then run iGate’s settings
3. Tap on Set up password and set the password and time to active iGate.
4. Wait for time out to see if iGate can active and enter password to see if it can go-in.
5. please send report/ comment to [email protected]
Thank you all very much for help us to test iGate.
Screen shot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ill try now
just installing now
will let you know how it goes over the weekend
thank you

liamhere said:
just installing now
will let you know how it goes over the weekend
thank you
Click to expand...
Click to collapse
Thanks so much for your help
Best,

can't install cab
not signed or parts missing

exe file
if you install from desktop win32 don't allow this file

liamhere said:
if you install from desktop win32 don't allow this file
Click to expand...
Click to collapse
You can get the CAB file here: http://www.ppclink.com/files/beta/PPCLink_Software_iGate.cab

thanks for the cab
on the phone and testing
THANK YOU

Mail-Design -> SMS/Messging (Manila2D)

Good evening,
I cant write english in a good way, so have fun at reading^^
This is my solution to add the Envelope/letter do the messaging-tab.
As you can see the background of the letter in the messaging tab AND in the mail-tab were changed.
SCREENDUMPS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Included in "Files1" (at Downloads)
Cheated solution for Bug2 (Long messages will be displayed over the envelope) - Included in "Files2" (at Downloads)
INSTRUCTIONS:
1. Go with an explorer to the windows directory and copy the files
hh_email_background.png
hh_email_envelope_down.png
hh_email_envelope_up.png
HTCHomeSettings.xml
to your storage card or anywhere else - THIS will be your backup, IF it doesnt work.
2. Copy the new files on your device. On the device you should copy all of the files in the windows-directory. You will be asked to overwrite the files - If you done task 1 its ok.
3. Restart Manila/Touchflo2D:
Settings -> Home -> System;
Uncheck "TouchFlo" -> Click OK;
Open the Home-Settings a second time -> System
Check "TouchFlo" -> Click OK -> Close Settings
4. There is no 4th Task, youre finished =)
BUGS:
1. If you scroll between your sms the envelope (not the letter) will slide too.
(Its the cause of replacing the line with the letter in the background)
2. Long messages will be displayed over the envelope (UNLIKE the mail-tab; the mails will be displayed correctly there)
(I made a cheated solution, with a white envelope - you can see it in the second picture)
Please notify that the home tab etc. will be changed too!
DOWNLOAD:
(I also uploaded my own created background/wallpaper) (Please dont host the files anywhre else and let the advertisement on uploaded.to opened 10 seconds):
It is VERY impossible to backup your files! (INSTRUCTIONS - Task1)
Files1 (with normal envelope + original files): http://ul.to/uh1way
Files2 (with white envelope + original files): http://ul.to/6t7fyt
Wallpaper: http://ul.to/qa18b1
PS: If you change things, like bugs etc. please post it here
Greetings
Hoamer

will this work in htc home, not manila?

Hm, i dont know. If htc-home is also based on xml-file it is possible - you can try it, but it is VERY impossible to backup your files - then you can try anything^^
If it works please post it here
EDIT: I searched for HTC-Home; no, this will not work with HTC-Home
Greetings
Hoamer

[SOLVED] Connection setting issue

Greetings.
I having a issue with connection setting page in start menu\setting\connections\connections
its appears everything white.
doesnt appear link to add new connection or edit my current conections
i wish for someone can help me, please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wm6.5.3 29002 build
touch pro 2

i had a problem like this, probably not related but ill explain anyway now that ive mentioned it
*linking a .lnk directly to the "advanced" tab caused me to have issues like the one your having = unable to make/edit a connection.
*for some reason it needs to load the connection in "tasks" before showing it in "advanced" so linking me .lnk to the "tasks" tab fixed my issue.
however, i suggest you run the htc connection setup, or ConnectionSetupAuto.exe.
this will add a new connection and youl be able to see/edit the connection settings
Rn

raving_nanza said:
...however, i suggest you run the htc connection setup, or ConnectionSetupAuto.exe.
this will add a new connection and youl be able to see/edit the connection settings..
Click to expand...
Click to collapse
Hardly, I suppose. The menu interface should be visible without any connection setup. Example - stock rom for any non-htc device.
My old Asus has no first boot setup or whatever like my Leo but Connection menu interface is available for manual setup.
It looks like either OP has problems with mui, or some "interface tweaks" had ruined the menu....
Suggestions:
1. Check mui
2. Do not cook in your custom tsk and all graphic custom **** and try to make close to stock rom.

Greetings. Well my connection was added but i wasnt see it
I find the solution, the problem was in the .rgu in ExtendedPkg from oem directory was changed by mistake. im using osbuilder. im just dump again my stock rom and change it, Now work fine.
Thanks all

[ROM][PORT]SmartisanOS for YUNIQUE by xinkid [Experience]

I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Click to expand...
Click to collapse
Description:
This ROM is based on 32Bit stock rom.
ROM is based on Smartisian OS 2.6.2 , It 's an Experience Edition
Fix audio camrea sensor compass and so on.
LTE/3G/GMS call data_network and communication module works well.
WIFI BT works.
SuperSU root.
Readjust the Launcher Resolution.
Add Easytouch .
Language:English Support.
Very Very Important:
After power on the devices , plz launch EasyTouch app.
Then, open Settings --- Advenced Settings --- Auxillary Functions --- EasyTouch --- On .
SmartisanOS Official Introduction ( Recommend ):
http://www.smartisan.com/jianguo/#/os
Known Issues:
No critical bugs.
BUG report & about me：
Facebook
Twitter
Google+
Downloads(all version):
[SmartisanOS] released on KingFlasher !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Method:
Recommend to use King Flasher: http://tfile.kingflasher.com/soft/kingflasher_setup.exe
1. Connect your phone to computer with USB cable and open USB debbuging.
How to open USB debbuging: Settings > About device > Tap “BUILD MUNBER” 7 times > Back to Settings > Developer options > Select “USB Debbuging”.
2. Please open King Flasher and choose a ROM you like, then click “Flash”.
3. Wait for downloading ROM.
4. After the download finished, King Flasher will flash your phone automaticlly. It will take about 5-10 minutes to finish.
5. Your phone will reboot to the new system when it finish.

link?
can you provide me the link?

[APP] Security button - revolutionary panic button!

Hi xda, i`m noob in this forum but i think, i made an useful tool for all privacy lovers!
I made a new panic button - Security Button!
What it can do:
Spoiler: Features
Main functions:
- Delete && Clean applications (log out of accounts)
-Reboot after uninstall
-Switchable warning
-Auto delete
-Delete selected folders and files
Delete via sms!
Label:
-Put your name
-Put your icon
-Specify which application to open when clicked
SMS features:
-Write any message, word, numbers or all together, anything (Register is important)
To start, write in your SMS your message with same register, it can be only one word or 1000 words, if app will find secret word or combination it will start delete!
Spoiler: Example
Secret words: buy bread
It will works:
buy bread
Hi buy bread please
i need you to buy breads
...100 words, buy breaddddsss ....
It will not works:
BuY BrEaD
Buy bread
bread
-Specify which numbers to respond to:
You can write at least a thousand, comma separated, a space, or even 100 spaces, it doesn't matter. (Write in international format! The app will not works to less than 8 digits!)
That's all for now I'll update the source code in the evening
Spoiler: About bugs
I think it app have bugs for androids <P, or some special roms like miui(but i tested it ok)
So if you found any bug contact me or open issues at github! Or you have any ideas or code improvements, you are welcome!
Important - you need allow autorun option in settings to use sms function!
I hope my application will be useful to someone. While looking for ideas for updates)
Github link: https://github.com/huntmix/secbutton/
Youtube demo:
Spoiler: Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:

Doublepost ... Sorry..

Hi Huntmix,
You made a very cool tool ! Thanks for this!
May i make a wish ?
I would love to start this tool just from the lockscreen by just using a Fingerprint (which is not used for anything else) . Beside a Fingerprint (of a diffent Finger) that i use for "normal" unlocks !
That would be the perfect Privacy App for me.
Usecase:
When someone will force me to unlock the phone i just take the "Security finger" to start your wonderful privacy-tool!
Would something like that be possible ?