[SOLVE]please help for my problem!!! - Xperia Arc General

any help please
I tried to flash the file.img to have the root
at the end of fastboot I had a 1 bad block
fast boot, however, completed
restart the phone I always com.android.phone error .. I can't use the phone
After the help of Bin4ry, I tried a system erase and I reflash the files.img ... same error
now I tried to flash my rom.tft with flashtool , connect the phone to flash mode, but the flashtool does not recognize it ....
I can't even access the phone settings to enable debugging mode ...
I really do not know what to do ...
any help is appreciated before needing assistance from Sony
thanks in advance

so you did
fastboot erase system
fastboot flash system system.img
?

atleast u can turn on ur phone
i have two bad blocks .. and now my phone is not working
it shows
sony ericsson ,, and restart restart till the end
im so upset about that
is the global root really working
can somebody help me
is there anyway to restart the system or recovery or format
HELP

FrAsErTaG said:
so you did
fastboot erase system
fastboot flash system system.img
?
Click to expand...
Click to collapse
After erase i have reflash .img of binary for root...

omaritta said:
is there anyway to restart the system or recovery or format
Click to expand...
Click to collapse
Download the Sony System update and restore your phone to factory default.
http://www.sonyericsson.com/cws/download/1/110/61/1301900094/Update_Service_Setup-2.11.4.11.exe

funkyblue04 said:
Download the Sony System update and restore your phone to factory default.
http://www.sonyericsson.com/cws/download/1/110/61/1301900094/Update_Service_Setup-2.11.4.11.exe
Click to expand...
Click to collapse
i thought once you unlocked your bootloader, u can't update through seus?

Ok guy's...i have solve my problem...i think problem was my pc
Now i have reflash arc rom.tft with FLASHTOOL and work all...
my ARC is resumed....
thank's anyway to all for help...
Now will check to solve problem for flash root

can you tell me the steps 1 by 1
srry im new to this
help me plllzzzzz ^_^ ill be grateful

omaritta said:
can you tell me the steps 1 by 1
srry im new to this
help me plllzzzzz ^_^ ill be grateful
Click to expand...
Click to collapse
download FLASHTOOL 0.2.91
follow this step: http://forum.xda-developers.com/showpost.php?p=12970345&postcount=16
What model of ARC have you???
if you have LT15i you can flash this rom .tft
http://www.megaupload.com/?d=WZE79YZN
Follow the instructions that I linked and you can restore your phone

its ok
do i have to download the arc 1.0 se stock rom or i just download urs link ?
thx ill try it now
i miss my arc already
mediafire would be better

niice it woorks man ... thx ...
btw tell me when u root ur phone then ill root my phone
my step with your steps

Related

[Q] Flashing Error ! Please help.

Hello, I have an Xperia Play and since i had it i never flashed it , The only thing i did was rooting by using gingerbreak.
And i was trying to flash the new update http://forum.xda-developers.com/showthread.php?t=1097591
And when i use flashtool to flash it an Error massage appear :
13/013/2011 05:13:49 - ERROR - Error flashing. Aborted
13/013/2011 05:13:49 - INFO - Now unplug the device and power it on
13/013/2011 05:13:49 - INFO - Then go to application settings
13/013/2011 05:13:49 - INFO - turn on Unknown Sources and Debugging
And the problem is i cant boot the phone!!
I tried a different FTF file from here: http://forum.xda-developers.com/showthread.php?t=1048422
And i also tried this http://forum.xda-developers.com/showthread.php?t=1130639
But still nothing new..
So please help me my Phone can't boot.
ddsds said:
Hello, I have an Xperia Play and since i had it i never flashed it , The only thing i did was rooting by using gingerbreak.
And i was trying to flash the new update http://forum.xda-developers.com/showthread.php?t=1097591
And when i use flashtool to flash it an Error massage appear :
13/013/2011 05:13:49 - ERROR - Error flashing. Aborted
13/013/2011 05:13:49 - INFO - Now unplug the device and power it on
13/013/2011 05:13:49 - INFO - Then go to application settings
13/013/2011 05:13:49 - INFO - turn on Unknown Sources and Debugging
And the problem is i cant boot the phone!!
I tried a different FTF file from here: http://forum.xda-developers.com/showthread.php?t=1048422
And i also tried this http://forum.xda-developers.com/showthread.php?t=1130639
But still nothing new..
So please help me my Phone can't boot.
Click to expand...
Click to collapse
why device are you choosing in flashtool :? just pick the first one, i think its the x10
AndroHero said:
why device are you choosing in flashtool :? just pick the first one, i think its the x10
Click to expand...
Click to collapse
Thanks for helping, But how can i choose a file in Flashtool ?
As i understand i can only choose the FTF file , And i chose the Xperia Play one.
OK, After a lot of searching i found out that i had my phone Bootloader Unlocked before flashing,
And after that i tried to flash it and i got the error and it wont boot.
From what i red i only have 2 things to do :
1- Get the phone booting but without radio.
2- give it to sony and tell them that it just crashed while i was updating it.(And don't tell them anything about to root or the bootloadr)
So please if anyone knows any better way to fix it please tell me.
ddsds said:
OK, After a lot of searching i found out that i had my phone Bootloader Unlocked before flashing,
And after that i tried to flash it and i got the error and it wont boot.
From what i red i only have 2 things to do :
1- Get the phone booting but without radio.
2- give it to sony and tell them that it just crashed while i was updating it.(And don't tell them anything about to root or the bootloadr)
So please if anyone knows any better way to fix it please tell me.
Click to expand...
Click to collapse
You didnt need to unlock you bootloader to use flashtool, but now you have just flash a system.img from fastboot, your phone isnt bricked unless you tried to do an OTA updated with an unlocked bootloader
AndroHero said:
You didnt need to unlock you bootloader to use flashtool, but now you have just flash a system.img from fastboot, your phone isnt bricked unless you tried to do an OTA updated with an unlocked bootloader
Click to expand...
Click to collapse
I searched for the system.img file and i found these files :
1.play_modded.img
2.R800i_3.0.1.A.0.145_UK_system.img
3.recoveryPLAY.img
4.system.sin (I know it's an "SIN" file)
And i tried to use fastboot with them all and i allways get the same result:
"sending 'system' (XXXX KB)..."
I watied for very long time but nothing happend.
So please tell me if i am doing any thing wrong.
ddsds said:
I searched for the system.img file and i found these files :
1.play_modded.img
2.R800i_3.0.1.A.0.145_UK_system.img
3.recoveryPLAY.img
4.system.sin (I know it's an "SIN" file)
And i tried to use fastboot with them all and i allways get the same result:
"sending 'system' (XXXX KB)..."
I watied for very long time but nothing happend.
So please tell me if i am doing any thing wrong.
Click to expand...
Click to collapse
Try formatting /system and /boot first,
In fastboot type in
fastboot erase system
fastboot erase boot
Then flash this kernel with the command "fastboot flash boot boot.img"
http://forum.xda-developers.com/showthread.php?t=1176502
finally flash this system image with command "fastboot flash system xxxxxx.img"
http://forum.xda-developers.com/showthread.php?t=1098736
AndroHero said:
Try formatting /system and /boot first,
In fastboot type in
fastboot erase system
fastboot erase boot
Then flash this kernel with the command "fastboot flash boot boot.img"
http://forum.xda-developers.com/showthread.php?t=1176502
finally flash this system image with command "fastboot flash system xxxxxx.img"
http://forum.xda-developers.com/showthread.php?t=1098736
Click to expand...
Click to collapse
Still the same problem stuck with the :
"sending 'boot'"
And i also tried to flash the system but with the same result.
ddsds said:
Still the same problem stuck with the :
"sending 'boot'"
And i also tried to flash the system but with the same result.
Click to expand...
Click to collapse
And you are sure you have unlocked your bootloader maybe you should ask or PM blagus, he is the expert in these sorts of things
AndroHero said:
And you are sure you have unlocked your bootloader maybe you should ask or PM blagus, he is the expert in these sorts of things
Click to expand...
Click to collapse
Yes i just checked and it's unlocke.
And thank you so much for helping and i will PM him and wait .
Finally i got it to work !
I deleted the system with fastboot , Than i used this tool :http://forum.xda-developers.com/showthread.php?t=1134334 to re-lock the bootloader.
And finally i used the SE PC programme to repair the phone with the latest Update.
Thank you AndroHero very much for helping me.
ddsds said:
Finally i got it to work !
I deleted the system with fastboot , Than i used this tool :http://forum.xda-developers.com/showthread.php?t=1134334 to re-lock the bootloader.
And finally i used the SE PC programme to repair the phone with the latest Update.
Thank you AndroHero very much for helping me.
Click to expand...
Click to collapse
Thats great i'm glad you got it soted

[Q] How to downgrade from 2.3.5 to stock 2.1

Hello as the question says does anyone know
how to downgrade from 2.3.5 cyan to 2.1 stock???
Its cause i need a warranty cause sometimes my phone just
shuts down and other problems!!
Thank you
(Sorry if this was already posted, could anyone give me the link
if it is?)
KDZ
androidboss7 said:
Hello as the question says does anyone know
how to downgrade from 2.3.5 cyan to 2.1 stock???
Its cause i need a warranty cause sometimes my phone just
shuts down and other problems!!
Thank you
(Sorry if this was already posted, could anyone give me the link
if it is?)
Click to expand...
Click to collapse
You could use KDZ updater and flash a stock ROM. Could you explain the problem more in detail please?
jhonnyx1000 said:
You could use KDZ updater and flash a stock ROM. Could you explain the problem more in detail please?
Click to expand...
Click to collapse
Also cause I want 2.1 stock just in case my phone stuffs up cause soon it will!!
Also can u explain how to do more clearly!!!
Thank you!!
Goππa ®o©k & ®o//
i think the best way is to flash a 2.1 rom thru fastboot im sure there is fastboot stock rom somewhere after that use mur4ik's custom bootloader builder to erase fastboot and recovery.
edit: found one http://forum.xda-developers.com/showthread.php?t=1029459
bs828 said:
i think the best way is to flash a 2.1 rom thru fastboot im sure there is fastboot stock rom somewhere after that use mur4ik's custom bootloader builder to erase fastboot and recovery.
edit: found one http://forum.xda-developers.com/showthread.php?t=1029459
Click to expand...
Click to collapse
thanks!!!
but i was told from someone that if you
do it that way the phone wont turn on
in some cases!
I recommend you that you must be sure that this downgrade would be effect, beecause when you flash your device, the memory is modificated and its too hard to unmake this canges....
If you do it, can you tell us if the downgrade its result (you recovered your warranty)?
JotaJverde said:
I recommend you that you must be sure that this downgrade would be effect, beecause when you flash your device, the memory is modificated and its too hard to unmake this canges....
If you do it, can you tell us if the downgrade its result (you recovered your warranty)?
Click to expand...
Click to collapse
Can't i just flash 2.3.5 again after my warranty??
I'm sorry but you keep bringing this up and I have answered it numerous times. I told you here how to do it before.
Here it is again.
BTW: I HAVE NOT TESTED THIS MYSELF.
First of all, you need to get SwiftBootloaderBuilder from here.
(You also need .NET 3.5 SP1 installed, if you have Windows 7, afaik it is pre-installed with Windows)
Also download the correct non-fastboot KDZ for your country/provider & KDZ Updater.
Put your phone in fastboot and use the following commands:
Code:
fastboot -w (this wipes data & cache partitions.)
fastboot erase boot
fastboot erase system
fastboot erase recovery
Then open SwiftBootloaderBuilder and choose 'remove fastboot & recovery' Press OK to any warnings, then your phone may restart. (If it doesn't, then just press 'Reboot device')
Your phone will hang at the LG screen, in this case, pull the battery and USB cable out. Get ready by leaving the battery out, and then hold Volume Down and plug the USB cable in, while still holding volume down to put the phone in Download Mode. Fire up KDZ and choose the .kdz file you downloaded earlier Ensure that the type is 3GQCT and the PhoneMode is set to DIAG. Then start the flash. Make sure not to use the computer during flashing as it could cause KDZ to stop working and render your phone useless (bricked.)
It should reboot into Android 2.1, with fastboot & recovery removed and your warranty intact.
Hope it helps.
Click to expand...
Click to collapse
androidboss7 said:
Can't i just flash 2.3.5 again after my warranty??
Click to expand...
Click to collapse
And yes, you can.
Yeahh but I tried that method and for some reason nothing happened!!
Goππa ®o©k & ®o//
Effortless has given clear instructions can't see how you got it wrong? try again maybe? and make sure cmd kdz etc are all run as the administrator
Sent from my GT540 RSpec using XDA App
Danzano said:
Effortless has given clear instructions can't see how you got it wrong? try again maybe? and make sure cmd kdz etc are all run as the administrator
Sent from my GT540 RSpec using XDA App
Click to expand...
Click to collapse
i think the problem is that the computer
can;t read the phone when i connect it!
have you install all drivers (mainly fastboot) ?
More details please
Man_u said:
have you install all drivers (mainly fastboot) ?
More details please
Click to expand...
Click to collapse
Yes I have!!!!
But its ok I will just buy a new cable to see if that's the problem!!
Thanks for all ur help!!!
Goππa ®o©k & ®o//
Yep, disable lg modem on Hardware Manager and don't forget to make full wipe on recovery.
Sent from my GT540 using Tapatalk
could i flash 2.1 stock via recovery
and then remove fastboot and recovery
by Swiftbootloader???
I think is possible
Sent from my GT540 using xda premium
u use recovery to downgrade, search in the 4rum
Would it work if I flash by recovery then just unroot to remove fastboot and recovery???
Sent from my GT540 using Tapatalk
androidboss7 said:
Would it work if I flash by recovery then just unroot to remove fastboot and recovery???
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
When unrooting, you don't remove fastboot and recovery. To remove fastboot and recovery, use the guide I posted above.
effortless. said:
When unrooting, you don't remove fastboot and recovery. To remove fastboot and recovery, use the guide I posted above.
Click to expand...
Click to collapse
Alright thanks!!

[Q] my phone is not working, its unable to enter in recover mode

my phone is not working
i m trying to update it but installation is failed..
i wish to remove wipe and catche memory.. and delvic..
how is it possible to remove catch memory..
plz help is my handset brick or dead...:crying:
nilesh.wankhede said:
my phone is not working
i m trying to update it but installation is failed..
i wish to remove wipe and catche memory.. and delvic..
how is it possible to remove catch memory..
plz help is my handset brick or dead...:crying:
Click to expand...
Click to collapse
Reflash the same recovery you used with fastboot command. Fastboot flash recovery <name of file> .img.
That dont work flash stock ruu via hboot sdcard.
flipinfin said:
Reflash the same recovery you used with fastboot command. Fastboot flash recovery <name of file> .img.
That dont work flash stock ruu via hboot sdcard.
Click to expand...
Click to collapse
will u plese send me a link how i do it
nilesh.wankhede said:
will u plese send me a link how i do it
Click to expand...
Click to collapse
download this file http://dev-host.org/ytv59wps2wzc/PD15IMG.zip. rename to PD15IMG if it isnt already named that. place on root of sdcard. boot to bootloader shutdown phone. enter bootloader power button + vol down. bootloader should detect file update by pressing vol up. there u go
flipinfin said:
download this file http://dev-host.org/ytv59wps2wzc/PD15IMG.zip. rename to PD15IMG if it isnt already named that. place on root of sdcard. boot to bootloader shutdown phone. enter bootloader power button + vol down. bootloader should detect file update by pressing vol up. there u go
Click to expand...
Click to collapse
buDDY I DONE IT
WHILE update it shows fail pu..
on every image
might be its brick now..
even i cnt enter to recovery mode frm where i cn wipe up all data:crying:
nilesh.wankhede said:
buDDY I DONE IT
WHILE update it shows fail pu..
on every image
might be its brick now..
even i cnt enter to recovery mode frm where i cn wipe up all data:crying:
Click to expand...
Click to collapse
Your phone is toast. It is not fixable.
does windows recognize it when u plug it in? u provided basic info....u should provide more info so ppl can know n tell u if its hard bricked..or just soft bricked...turns on? getting tuck somewhere? more info might help others help u!!
if yes than u can try adb method ...try using this method http://forum.xda-developers.com/showthread.php?t=1178912 it will put it to stock....give it a try....as per what I remember on some forum it had to do smthng with ur hboot
nilesh.wankhede said:
buDDY I DONE IT
WHILE update it shows fail pu..
on every image
might be its brick now..
even i cnt enter to recovery mode frm where i cn wipe up all data:crying:
Click to expand...
Click to collapse
IndianKarmas said:
does windows recognize it when u plug it in? u provided basic info....u should provide more info so ppl can know n tell u if its hard bricked..or just soft bricked...turns on? getting tuck somewhere? more info might help others help u!!
if yes than u can try adb method ...try using this method http://forum.xda-developers.com/showthread.php?t=1178912 it will put it to stock....give it a try....as per what I remember on some forum it had to do smthng with ur hboot
Click to expand...
Click to collapse
If he has the "fail-pu" error in bootloader his eMMC is gone. It doesn't matter if adb works.
estallings15 said:
If he has the "fail-pu" error in bootloader his eMMC is gone. It doesn't matter if adb works.
Click to expand...
Click to collapse
its good challenge for me
wait for solution i will post soon..
i will repair it
Via Riffbox or Polar Box
nilesh.wankhede said:
its good challenge for me
wait for solution i will post soon..
i will repair it
Via Riffbox or Polar Box
Click to expand...
Click to collapse
Right...
Good luck. You'll need it.

Help to fix bootloop please

Hey guys I need your help. My Xiaomi A1 got bootloop after I update OTA to Android 8.1.
I cannot unlockbootloader cause I did not turn on usb debugging before. I tried every ways but failed. Please help me
lightningjet said:
Hey guys I need your help. My Xiaomi A1 got bootloop after I update OTA to Android 8.1.
I cannot unlockbootloader cause I did not turn on usb debugging before. I tried every ways but failed. Please help me
Click to expand...
Click to collapse
This is where a/b partition does his magic.
If your update failed then phone will boot on the previous partition to make the update again
I think you can still change slot partition on fastboot with the right driver's installed and right command
Dead-neM said:
This is where a/b partition does his magic.
If your update failed then phone will boot on the previous partition to make the update again
I think you can still change slot partition on fastboot with the right driver's installed and right command
Click to expand...
Click to collapse
here is a guide if u dont know how to change partition:
download fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
if u already have fastboot it might not work because its not the latest version but it is the latest version from this link
reboot to bootloader by holding power + volume down button while ur phone is shut down (to shut it down just hold power button)
open the cmd-here.exe file from the zip and type: fastboot devices, if it shows u a string then ur good, if no strings u need to download ur phone's driver and if more than one then unplug ur second phone from ur pc
then type: fastboot --set-active=b if that didnt fix it try --set-active=a and if that didnt fix it then u cant fix ur bootloop using partitions
Dead-neM said:
This is where a/b partition does his magic.
If your update failed then phone will boot on the previous partition to make the update again
I think you can still change slot partition on fastboot with the right driver's installed and right command
Click to expand...
Click to collapse
Thank you, sir. But could you show me how to do that please. Sorry I’m newbie for that.
YayJohn said:
here is a guide if u dont know how to change partition:
download fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
if u already have fastboot it might not work because its not the latest version but it is the latest version from this link
reboot to bootloader by holding power + volume down button while ur phone is shut down (to shut it down just hold power button)
open the cmd-here.exe file from the zip and type: fastboot devices, if it shows u a string then ur good, if no strings u need to download ur phone's driver and if more than one then unplug ur second phone from ur pc
then type: fastboot --set-active=b if that didnt fix it try --set-active=a and if that didnt fix it then u cant fix ur bootloop using partitions
Click to expand...
Click to collapse
Thanks alot, I’ll try.
Sent from my iPhone using Tapatalk
YayJohn said:
here is a guide if u dont know how to change partition:
download fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
if u already have fastboot it might not work because its not the latest version but it is the latest version from this link
reboot to bootloader by holding power + volume down button while ur phone is shut down (to shut it down just hold power button)
open the cmd-here.exe file from the zip and type: fastboot devices, if it shows u a string then ur good, if no strings u need to download ur phone's driver and if more than one then unplug ur second phone from ur pc
then type: fastboot --set-active=b if that didnt fix it try --set-active=a and if that didnt fix it then u cant fix ur bootloop using partitions
Click to expand...
Click to collapse
I did it. Thank you a thousand times you are my sunshine <3
lightningjet said:
I did it. Thank you a thousand times you are my sunshine <3
Click to expand...
Click to collapse
np press on thanks if it helped u
YayJohn said:
np press on thanks if it helped u
Click to expand...
Click to collapse
Yes sir. I got new problem. I cannot pass google account verified. My Granny he doesn’t remember his email and password. I need to do Bypass through abd but it requires USB debugging on.
Really sad that he didn’t turn on USB debugging before. Could you guys show me how to turn it on without go to Settings?
Sent from my iPhone using Tapatalk
just reflash stock rom via miflash and sign in with another account, or you can change password for the current account if there's any backup email/phone number provided
pooniaprashant said:
just reflash stock rom via miflash and sign in with another account, or you can change password for the current account if there's any backup email/phone number provided
Click to expand...
Click to collapse
Thank sir
Sent from my iPhone using Tapatalk
Mi a1 boot loop 8.0 Oreo to 8.1 OTA UPDATE SOLUTION
Hi friends 8.0 Oreo to OTA 8.1 try to update your phone boot loop I will give the solution ..turning on mobile in fastboot mode ..1) download pie beta fastboot ROM after platform tool download and extract AFTER ROM extract copy ROM files in platform tools after ..2turn to fastboot mode .3)open platform tool copy the ROM files after..4)DOUBELE CLIK..Flash ALL ...after wait 15minutes .black screen automatically open and running some commands don't worry and don't exit black screen still wait your phone reboot wait 15minutes after automatically reboot your phone in 8.0 Oreo ..5)CLIKING FLASH ALL ..AFTER black screen shows fail ..fail ..fail you will do not disconnect your phone wait your phone will be reboot automatically within 15 minutes .6) please note ..AFTER CLIICK FLASH ALL ..YOU WILL WAIT 15.MINUTES BUT COMAND AUTOMATICALLY OPENING ABD SHOWS FAIL don't worry about then .the process compleate take time 15to 20 minutes you will still wait after reboot automatically you will disconnect your mobile and enjoy

tb-7104f root?

Any hope in getting root for this model? from my research it seems to be rootable, but I can't find any rom or anything for it, even here in xda.
Any kind of help is greatly appreciated
IT IS NOT THAT MUCH HARD
i found a way to do it
>>First download latest magisk apk
Link - https://www.google.com/url?sa=t&sou...FjAAegQIAxAC&usg=AOvVaw2Xrf3Ndu6oqxqBK9TKilSx
>>Then download stock rom here
Link - https://www.google.com/url?sa=t&sou...AhWCbysKHUiHBUsQFjAAegQIAxAC&usg=AOvVaw3XrjI-
Sog1qkyLy9lXieK2vR&ampcf=1&cshid=1621397379367
[Sorry but u cant use latest firmware cuz its not available]
>>Then extract it and get boot.img
>>Patch it using latest magisk manager
Now lets go to install it
U can use pc if u have but if u dont then follow these steps
Share firmware file and patched boot file to other device and install bugajear app on other device [link- https://play.google.com/store/apps/details?id=eu.sisik.hackendebug]
>>Then open ur tab go to settings enable developer option and then enable oem unlocking and usb debugging on it
>>Enable usb debugging on other device also
>> Connect both through otg and then allow permission then reboot ur tab to bootloader [power+volume up button] u can use app also for that
NOW LETS UNLOCK BOOTLOADER FIRST [it will eras ur data take a backup]
>>Open bugajear after u boot into bootloader
>>Go on last option with sign of electricity and press on [<>] bottom right of ur other device
>>Type [fastboot flashing unlock] then run it
>>Choose yes on ur device with volume buttons [ sometime u press right volume button but it doesn't work then try other]
>>It will erase ur device but ur bootloader is now unlocked now just reboot to bootloader again
>> Now type [ fastboot flash boot ] click on embed sign on top right corner and then link ur file and run it
>>Now just extract ur firmware on other device too and get these files
System.img
Vendor.img
And flash them this is really needed or u end up in bootloop
And tada ur all set just reboot ur device and ur rooted
I am also tryibg to get twrp but it will take sometime
Thank you @Aks BRAR SOTHA.
I was stuck for so long because of the bootloader being locked.
But this...
Aks BRAR SOTHA said:
[ sometime u press right volume button but it doesn't work then try other]
Click to expand...
Click to collapse
Enoh_ said:
Thank you @Aks BRAR SOTHA.
I was stuck for so long because of the bootloader being locked.
But this...
Click to expand...
Click to collapse
Ur most welcome i got twrp also if u want i can upload it also
Aks BRAR SOTHA said:
Ur most welcome i got twrp also if u want i can upload it also
Click to expand...
Click to collapse
My main goal is to use the tablet as an LCD display for my PC sensors.
I need root to auto enable tethering on usb plug.
Device is still rebooting from the flash for now, but I think it should have done the trick for my purpose.
@Aks BRAR SOTHA Did you manage to prevent Android from updating ?
It tries to update and update fails. Then try again and again..
Edit: For my purpose, I can just disable WiFi, and no more update. But this is not the elegant way :/
Enoh_ said:
@Aks BRAR SOTHA Did you manage to prevent Android from updating ?
It tries to update and update fails. Then try again and again..
Edit: For my purpose, I can just disable WiFi, and no more update. But this is not the elegant way :/
Click to expand...
Click to collapse
Thats the big problem preventing it is not possible
If u are using internet from other device u can shift from wifi hotspot to bluetooth hotspot
I dont know any other way
Enoh_ said:
My main goal is to use the tablet as an LCD display for my PC sensors.
I need root to auto enable tethering on usb plug.
Device is still rebooting from the flash for now, but I think it should have done the trick for my purpose.
Click to expand...
Click to collapse
I got all type of recovery for our device
Twrp
Pbrp
Orangefox
Shrp
If u want any u can contact me
Aks BRAR SOTHA said:
I got all type of recovery for our device
Twrp
Pbrp
Orangefox
Shrp
If u want any u can contact me
Click to expand...
Click to collapse
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
angelote33 said:
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
Click to expand...
Click to collapse
Sure
angelote33 said:
Can you share the 4 recovery img please? Im looking for a Rom too.
Thanks in advance
Click to expand...
Click to collapse
This is my number
Ouiquqywyt
O-9 and u-7 decode this i cant share straight msg me here on instagram. I used letters according to numbers on qwerty keyboard
I just found this thread and thanks for the instructions. I was able to successfully root my tablet using this method. Of course it kept wanting to update and failed during the process so I thought I would try to get the update patched...
with the device rooted (with the old firmware) allow the update to download
get a shell with `adb shell` and then `su -` (approve the root request on the device)
the zip file is located in `data/data/com.lenovo.ota/fileslenovoota` unzip it and copy boot.img to somewhere the magisk app can find (I used `/sdcard/Download/`)
patch the boot.img with magisk
use adb pull to get the patched img onto your computer
boot into fastboot and flash the original boot.img, system.img, vendor.img from the zip provided above (in the original instructions)
reboot the tablet. The update should now be able to complete
once complete, reboot into fastboot again and flash the updated patched boot.img
reboot and you should be on the latest version and be rooted.
I've also attached the patched boot.img from the update

Categories

Resources