as tittile,
i pressed the Camera+Connection manager+Power Button at the same time
,after release the "soft-reset"...nothing happened..it still hanged..
Bootloader and Hard Reset
If you want to enter in Bootloader mode you have to press and hold the Camera button, and in the same time you need to press the Power Button once.
If you have issues with your phone, the bootloader mode won't help you much, maybe you need a hard rest. Please post more details regarding your issue.
wildman_lin said:
as tittile,
i pressed the Camera+Connection manager+Power Button at the same time
,after release the "soft-reset"...nothing happened..it still hanged..
Click to expand...
Click to collapse
Press the Camera button and soft reset. Hold the camera button until you see 4 color bands on the screen.
hey,
i need to send my hd2 back for repair but unfortunately i can't get into the bootloader! volume up / down buttons do work when im in windows mobile, but when the phone is switched off, i press volume down + power button once and the phone just boots into windows mobile.
is there any other way to restore your phone to the stock spl?
You need to press Vol UP and PowerOn, not Vol Down
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
tried that too, unfortunately not working ...
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
JayVee said:
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Click to expand...
Click to collapse
Sorry then, Vol UP has been my other phone I haven't flashed the HD2 via SD Card yet.
I just can think that you do not press the Vol DOWN button hard enough or long enough. You have to press and hold the Vol DOWN button and switch on the phone, then lift the power button while still holding the Vol DOWN button.
Hi all
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
This what I do to go into bootloader mod in my HTC HD2 Leo :
Press together VOLUME DOWN & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen appeared
add ; 4 all ; if for any reason while you are in bootloader - tri-coloured mod - and want to go back to normal ,
just press RESET RED BUTTON , your device will reset .
hope this will help . . .
meptik said:
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
Click to expand...
Click to collapse
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no change for warranty any more .
Click to expand...
Click to collapse
Hmm, very weird.
The actual keys are obviously ok - they're just not handled while in bootloader. I'm not sure what exactly is responsible for that, I assume it's not the OS, so perhaps SPL or Radio?
Not sure if it would make any difference, but perhaps you can try reflashing the HSPL (or maybe a different radio?).
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
Click to expand...
Click to collapse
when its asking to install the rom (in bootloader) hold down volume up (or whatever key it asks you to press to install) REALLY HARD,
another suggestion, take off the back, the buttons seem easier to press when the back battery cover it off
maybe this will work
1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.
Ooops!
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
g3k said:
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
Click to expand...
Click to collapse
it is a real wierd problem, i can switch the phone on with the power button and when it is turned on, all keys work beside the talk(send) button. but i can not go into bootloader mode and power button / volume down button to confirm / cancel update when entering bootloader mode with bootloader.exe don't work.
you should really try to reflash radio and hspl again. if you can power on the device the hardwarebutton must work. looks like a software problem...
have you check that you vol down button is working? it happen to me before,
maybe you could contact the hspl maker if he can help you? i have in my mind that he could "hack" the procedure to NOT ask for SEND key press?
Thanks for all your replies. I left the phone off for about 4 hours charging. I switched it on press the vol down button and it worked! How weird / lucky. So I flashed a new rom and I am working again.
Thank you so much for you time.
One last thing though, now in WinMo the vol up and vol down work and the power button work. But the other 4 hardware keys don't, they just force the phone into vibrate/silent mode. When I get a phone call it also turns the volume down/off/vibrate.
Maybe a hardware failure?
Matt
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
jeffrey92 said:
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
Click to expand...
Click to collapse
Vol down and power button
Thats what I'm doing and it results in what i described in the first part of my post.
ive tried all sorts of button combinations and none work
Throwin this out there but could ur vol+ button be sticking???when u do vol +/- ull get that screen
i did a button test and all the buttons work like they should, except when i press vol up nothing happens but when i press menu it registers both menu and volup
but yeah volup by itself does nothing...
In order to get to the reset screen you must be pushing the Vol Up + Vol Down + Power on. To get to bootloader it is only Vol Down + Power on. Make sure that you press at the bottom end of the Vol button.
Ok so that means my volup is stuck or malfunctioning. Any ideas on how to remedy this?
Apart from getting a service, No. Sorry.
i cant go to twrp with hardware
how can i do this? I FORGOT MY PASSWORD
blease help me
rowihel2012 said:
i cant go to twrp with hardware
how can i do this? I FORGOT MY PASSWORD
blease help me
Click to expand...
Click to collapse
Turn off the phone, once off, hold the VOL- and power until you see the LG logo then let go of the power button for one second while still holding the VOL- then repress the power button and hold both buttons again until you get into the factory reset screen, use the volume buttons and power to hit yes twice and then that should boot you into TWRP.
can you help me with this in the secure startup password screen? After the update I bought a new motherboard is stuck in this password, my motherboard model needs to be H990 ISR I do not know exactly how can we solve it?
brobro46 said:
can you help me with this in the secure startup password screen? After the update I bought a new motherboard is stuck in this password, my motherboard model needs to be H990 ISR I do not know exactly how can we solve it?
Click to expand...
Click to collapse
did you try and factory reset the phone?
Deadmeat03 said:
did you try and factory reset the phone?
Click to expand...
Click to collapse
I cannot access anything other than the password screen
Is there any chance of recovery if I manage to reset?
brobro46 said:
I cannot access anything other than the password screen
Is there any chance of recovery if I manage to reset?
Click to expand...
Click to collapse
Try factory resetting using the button combo.
To do this, do the following:
Turn off the device.
Press and hold the Power and Volume down buttons.
When the LG logo appears, quickly release and then re-hold the Power button while continuing to hold the Volume down button.
When "Factory data reset" appears, use the Volume down button to highlight Yes.
Press the Power button to confirm.
When prompted to "Erase all user data and restore default settings," use the Volume down button to highlight Yes.
Press the Power button to reset the device.
mickeyasamoah said:
Try factory resetting using the button combo.
To do this, do the following:
Turn off the device.
Press and hold the Power and Volume down buttons.
When the LG logo appears, quickly release and then re-hold the Power button while continuing to hold the Volume down button.
When "Factory data reset" appears, use the Volume down button to highlight Yes.
Press the Power button to confirm.
When prompted to "Erase all user data and restore default settings," use the Volume down button to highlight Yes.
Press the Power button to reset the device.
Click to expand...
Click to collapse
can you help us solve the problem with the remote connection if my brother doesn't try them?
brobro46 said:
can you help us solve the problem with the remote connection if my brother doesn't try them?
Click to expand...
Click to collapse
Well, I would have loved to but all the steps must be executed on the phone which makes remote connections worthless as everything happens on the phone it's self.
mickeyasamoah said:
Well, I would have loved to but all the steps must be executed on the phone which makes remote connections worthless as everything happens on the phone it's self.
Click to expand...
Click to collapse
thank you bro: Parmak-geçti: was the method you call