Related
When i try to push or pull anything it says, e/ddms the file cannot be pushed because its a read-only file system. Any help?
Mdawg112 said:
When i try to push or pull anything it says, e/ddms the file cannot be pushed because its a read-only file system. Any help?
Click to expand...
Click to collapse
You have to remount the FS in read/write mode.
With adb it's 'adb remount'.
smw6180 said:
You have to remount the FS in read/write mode.
With adb it's 'adb remount'.
Click to expand...
Click to collapse
Ha, I feel stupid now.
Mdawg112 said:
Ha, I feel stupid now.
Click to expand...
Click to collapse
Happens to everyone at times. Don't sweat it
So what do you do, if you run adb remount
and it still say's read-only system when trying to push?
been dealing with it for a few days, looked all around the forums and didn't find anything that helped :-/
jubi23 said:
So what do you do, if you run adb remount
and it still say's read-only system when trying to push?
been dealing with it for a few days, looked all around the forums and didn't find anything that helped :-/
Click to expand...
Click to collapse
Good question. Unfortunately I have no idea. Never seen it fail. theoretically there's a command line you can run in adb shell to mount the FS read/write, but I can't remember it off the top of my head.
Something like mount -o rw /dev/m3blk (as I said I can't remember the exact filesystem name). I'd do a search for 'mount -o' on the forums. It's been posted more than once and I'm too lazy to find it for you
I believe you're refering to
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
if so, tried that too :-/ still nothing
i read someone had reformatted their card on xp vs 7, so tried that to and still nothing haha
i give up
thanks btw
Yeah, I'm having the same problem as you sometimes. Other times it works. It's very strange! It annoys me. Anyone have any idea on a fix?
jubi23 said:
I believe you're refering to
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
if so, tried that too :-/ still nothing
i read someone had reformatted their card on xp vs 7, so tried that to and still nothing haha
i give up
thanks btw
Click to expand...
Click to collapse
Yeah that's the one, thanks.
Have you tried that from recovery? Are you using a2sd and if so, what ext?
Are you able to mount the card as a disk drive? Are you sure the SD card isn't going bad on you?
Sounds like you've checked anything else I would have thought of...wish I could help.
Have you tried that from recovery? Are you using a2sd and if so, what ext?
Are you able to mount the card as a disk drive? Are you sure the SD card isn't going bad on you?
Click to expand...
Click to collapse
Well i'm actually trying to flash a new recovery (all in the pursuit of installing flipz new fresh rom with ext4 haha), so was doing it from the computer
I tried using a2sd but i'm pretty sure it didn't work, because i went to ext4 and to my knowledge fresh 2.0d can't use ext4, so yea, i fail
i am able to mount the card as a disk drive and can move things back and fourth via explorer, play music, everything except this seems to be fine, it's only a few weeks old, so i really hope it's not dying
jubi23 said:
Well i'm actually trying to flash a new recovery (all in the pursuit of installing flipz new fresh rom with ext4 haha), so was doing it from the computer
I tried using a2sd but i'm pretty sure it didn't work, because i went to ext4 and to my knowledge fresh 2.0d can't use ext4, so yea, i fail
i am able to mount the card as a disk drive and can move things back and fourth via explorer, play music, everything except this seems to be fine, it's only a few weeks old, so i really hope it's not dying
Click to expand...
Click to collapse
That could be it. ext4 doesn't play nicely with ext3 based stuff. It's 'semi' backward compatible (meaning you can mount ext4 as ext3) but it seems to have some serious inconsistencies that way. I'd recommend a re-partition and then upgrade ext3->ext4 AFTER you install the new ROM.
Heh. I had all KINDS of problems restoring an ext3 based nandroid after upgrading to ext4. Had to repartition and then restore the nandroid to get it to work.
well, loaded recovery, re-partitioned my sdcard, upgraded to ext3 and left it there, still nothing
the sd card wouldnt have any bearing on the ability to adb remount.
the /system partition is stored on the phone itself, so the mount -o ..yadda yadda
remounts the /system partition in this case /dev/block/mtdblock3.
the only reason a sd card would come to play is if youre runnign a2sd, in which case it makes symlinks (shortcuts) to the sdcard, if the sdcard is formatted improperly then a2sd will either cause a bootloop, or crash and then youre phone should boot normally but you wont have access to your ext4 partition (the partition with your apps).
im not sure how to fix a problem with adb remount, perhaps try a new version of the SDK or just a clean one.
good luck
I'm wondering if there is something wrong with my mounting
When i'm in the shell
if i cd /sdcard
then do a ls
nothing is returned
I've also directly copied the recovery image from my computer to the sdcard, and attempted to run the flash_image command and it says no such file or directory
I do have usb debugging enabled and am selected to mount the sdcard, is there some other step or something i'm missing?
nenn, i had actually just a little bit ago downloaded the latest sdk on a completely different machine and still same results
Alrite, so I was able to copy the image recovery from
explorer and flash from.terminal on my phone
Although I'd prefer to work from the pc, anyone have any other possible ideas?! I'm at a loss
-------------------------------------
Sent from my HERO200
Hey GT540 users!
I tryed many roms so far, for example utopia, aokp 4.0.4, project icecreamswift, some 2.3.7 roms which i dont remember the developers and etc. On every single custom rom i realise that i have space probs. I install around 15 apps and my device runs out of storage (or space) really really fast.
Please can you suggest some ideas about this problem? I allready made an ext3 partition on my sd card and really really care to use it smarter and wiser. I tryed link2sd but seems it crash a lot and all my apps are really messed up. If again ext3 is not needed, thats fine. i really need some suggestions.
Is anything i can do without an application? If not, do u mind suggest me some application please that works 100%?
Anything you want to ask im here.
Thanx in advance!!!
For 2.2 and 2.3 roms just use this, http://forum.xda-developers.com/showthread.php?t=1171531
i really really dont think thats a good idea... i really prefer i simple way than this...
manthos1978 said:
Hey GT540 users!
I tryed many roms so far, for example utopia, aokp 4.0.4, project icecreamswift, some 2.3.7 roms which i dont remember the developers and etc. On every single custom rom i realise that i have space probs. I install around 15 apps and my device runs out of storage (or space) really really fast.
Please can you suggest some ideas about this problem? I allready made an ext3 partition on my sd card and really really care to use it smarter and wiser. I tryed link2sd but seems it crash a lot and all my apps are really messed up. If again ext3 is not needed, thats fine. i really need some suggestions.
Is anything i can do without an application? If not, do u mind suggest me some application please that works 100%?
Anything you want to ask im here.
Thanx in advance!!!
Click to expand...
Click to collapse
I use link2sd without any issues - try an ext2 partition
Also, try the link -Grift- posted. That is actually quite easy, all you do is boot into fastboot, connect to PC, run a program, click some buttons DONE!
If you don't want to do any of these, then you are a bit stuck, sorry to say!
ok thanx for your info!
will try make an ext2 1st and retry link2sd, if not changing partiotion is my last hope
ok i installed link2sd and this time seems it works fine... well.. so far
the only problem i got, when i reboot the phone, the application link2sd requires a 2nd restart (soft one) because cant mount the apps. Is this ok or done again something wrong?
Cheers
manthos1978 said:
ok i installed link2sd and this time seems it works fine... well.. so far
the only problem i got, when i reboot the phone, the application link2sd requires a 2nd restart (soft one) because cant mount the apps. Is this ok or done again something wrong?
Cheers
Click to expand...
Click to collapse
I have the same problem too. link2sd cannot automount the 2nd partition at boot so each time I have to reboot the phone I must reboot it 2 more times to get link2sd mount the 2nd partition correctly. How can I solve this problem
no1 intrested to help us?
In Link2SD, Press the menu button, then select 'More'. Select Recreate mount script. Choose your ext partition type, then ok. Reboot your phone. If it still asks you to remount, try these command on Terminal:
Code:
mount -rw -t ext2 -o remount /dev/block/vold/179:2 /data/sdext2
then
Code:
mount -rw -t ext2 -o remount /dev/block/mmmcblk0p2 /sd-ext
If it's not an ext2 partition, change the 'ext2' in the command with what your ext partition is.
Did you use the Android "Move to USB storage" or "Move to SD card" idk function? on android 2.2 and above?
You don't need to repartition your SD card for it
I would suggest to use Apps2ROM app. This is an application that has the ability to move normal (user) application into the ROM and use them as system apps. Th application can also uninstall system apps.
So, first you can get rid of system applications that you do not use and you utilize also the available system memory. Be careful not to go under 20 MB of the system mem.
You need root access to do so and some care not to uninstall essential system apps for the stability of the Operating system.
Sent from my LG GT540 using XDA
jhonnyx1000 said:
In Link2SD, Press the menu button, then select 'More'. Select Recreate mount script. Choose your ext partition type, then ok. Reboot your phone. If it still asks you to remount, try these command on Terminal:
Code:
mount -rw -t ext2 -o remount /dev/block/vold/179:2 /data/sdext2
then
Code:
mount -rw -t ext2 -o remount /dev/block/mmmcblk0p2 /sd-ext
If it's not an ext2 partition, change the 'ext2' in the command with what your ext partition is.
Click to expand...
Click to collapse
When i type the 1st code, the terminal is keep question me if im root....
To be exact it says:
Code:
mount: permission denied (are you root?)
Any solutions?
ahh type
su
first
the start of the line should change from
$
to a
#
jhonnyx1000 said:
In Link2SD, Press the menu button, then select 'More'. Select Recreate mount script. Choose your ext partition type, then ok. Reboot your phone. If it still asks you to remount, try these command on Terminal:
Code:
mount -rw -t ext2 -o remount /dev/block/vold/179:2 /data/sdext2
then
Code:
mount -rw -t ext2 -o remount /dev/block/mmmcblk0p2 /sd-ext
If it's not an ext2 partition, change the 'ext2' in the command with what your ext partition is.
Click to expand...
Click to collapse
I guess the 1st code is fine, no errors on my phone, but when i type the 2nd code, i get this message:
Code:
mount: mounting /dev/block/mmmcblk0p2 on /sd-ext failed: Invalid argument
So... what have i done wrong now?
Hey guys, for a couple reasons I'd like to be able to format my micro SD card with the ext4 file system.
I can format my card using a computer running Ubuntu, but the card will not mount.
I'm running CM10 on my P3113.
Is there any simple way to do this?
It seems like it'd be best to use vold to mount the sdcard, but that doesn't support ext4 I guess?
Just wondering...
Ext4 support has to come from kernel.
???
Literally every other mounted filesystem on the CM10 ROM I use is ext4...
I'm gonna try mounting via an init.d script.
We'll see if that works...
Solved this one, it was easier than I expected.
You need to format the card, and then mount it at boot via a script.
CM9 and 10 support init.d scripts, so I have a script file at /system/etc/init.d/95sdcardext4
with this contents:
Code:
#!/system/xbin/sh
# Mount SD Card Ext4 Script
mount -rw -t ext4 /dev/block/mmcblk1p1 /storage/sdcard1
This runs very early in the boot up process, and ext4 partitions mount basically instantly, so everything is working as expected so far.
More tests need to be done, but I'm fairly certain I can package this up in a flashable ZIP package.
Brilliant !
ext4 is anyways far better than fat32 except Windows/Mac compatibility.
Awaiting your stable work
It will work on a s5670 running cm10 jb4.1.1?
I just have to create a file with that lines and put it in /system/etc/init.d/95sdcardext4 ?????????
I cannot get link2sd to mount the ext4 partition.
Thx
DivinityCycle said:
Solved this one, it was easier than I expected.
You need to format the card, and then mount it at boot via a script.
CM9 and 10 support init.d scripts, so I have a script file at /system/etc/init.d/95sdcardext4
with this contents:
Code:
#!/system/xbin/sh
# Mount SD Card Ext4 Script
mount -rw -t ext4 /dev/block/mmcblk1p1 /storage/sdcard1
This runs very early in the boot up process, and ext4 partitions mount basically instantly, so everything is working as expected so far.
More tests need to be done, but I'm fairly certain I can package this up in a flashable ZIP package.
Click to expand...
Click to collapse
Sorry about that, I don't have one of these anymore. I had a P3113, but switched to a T869, which is a very similar device but has 4G and some different stuff going on under the hood.
My brief ext4 experiment was honestly not that big of a deal. I ended up going back to FAT32 because the benefits didn't outweigh the annoyances.
The biggest issue I had was I couldn't figure out how to make the file system permissions behave in the same highly permissive way that FAT32 does. I ran into several force closes and other things that resulted from apps not being to read / write stuff on the card that they should have been able to. I know you can CHMOD stuff, and a boot script could chmod everything on the card, but that seems like a bandaid.
Maybe there's a way to make the permissions behave a specific way via the mount parameters? I didn't investigate deeply enough because my life got busy, and during the changeover to the new tab it was just easier to go back to FAT32. Also my new tab has 16GB of internal storage, so I've been much less stressed about storage.
Ok folks.. ...reviving an ancient thread....from good ol days when it 'KISS' was common for Android.
What about android 7+ onward . All this stuff is deprecated. My 128gb is cut into 3 Ext4's.
(I need a journaled FS - that story a lil later )
I can mount easily but problem is apps cant see it and its all got to do with mount space concept.
I am Su'ed via Magisk
Can someone post a step by step guide to mount ext4 on 7+
I've given up on reformatting the internal memory as EXT4 (my last post). However now, I want to mount an external SD card that is EXT4 (or any file format that has UNIX permissions). I can't get my device to mount the card, it says the filesystem is unsupported. Now, that's bull**** since Android has built in support for EXT. After searching threads here on XDA and Google, and even purchasing EzyMount as recommended, I can't get it to mount. I've tried BusyBox and mount commands (as root), with various errors such as "mount operation not supported on transport endpoint". I'm at my wit's end by now, trying to get some filesystem which has support for symlinks and UNIX permissions... any ideas?
kcattakcaz said:
I've given up on reformatting the internal memory as EXT4 (my last post). However now, I want to mount an external SD card that is EXT4 (or any file format that has UNIX permissions). I can't get my device to mount the card, it says the filesystem is unsupported. Now, that's bull**** since Android has built in support for EXT. After searching threads here on XDA and Google, and even purchasing EzyMount as recommended, I can't get it to mount. I've tried BusyBox and mount commands (as root), with various errors such as "mount operation not supported on transport endpoint". I'm at my wit's end by now, trying to get some filesystem which has support for symlinks and UNIX permissions... any ideas?
Click to expand...
Click to collapse
you fully rooted with custom kernel or only with rdlv etc?
First you gotta figure out how to mount this damn thing, gotta be possible.
Then you need to get this done on bootup, either in init.rc or init.d or smth.
You probably just use wrong commands? But I could be wrong, didnt try that yet but would also be interested. Having the file permissions also on SD would be nice, but it could cause trouble with mtp maybe?
zroice said:
you fully rooted with custom kernel or only with rdlv etc?
First you gotta figure out how to mount this damn thing, gotta be possible.
Then you need to get this done on bootup, either in init.rc or init.d or smth.
You probably just use wrong commands? But I could be wrong, didnt try that yet but would also be interested. Having the file permissions also on SD would be nice, but it could cause trouble with mtp maybe?
Click to expand...
Click to collapse
I am rooted, but stock ROM and kernel. MTP is for connecting to a computer? If it is, I don't need that. I have tried
mount -rw -t ext4 /dev/block/mmcblk1p1 /storage/extStorageCard
and variants switching the flags and options.
Interesting... I just typed that command in to make sure I didn't make any typos.... and my phone crashed and rebooted. I typed it again to see if it would cause another crash and it appears to have mounted the card! Whwn I type "df" at the prompt it now shows a 28.6 GB filesystem at that location, which has to be my sd card.
Why, how, I don't know. It works, it's all I can say.
Problem statement
The Amazon Fire TV has a limited memory sotrage of less than 5GB.
FolderMount allows for moving App data/obb to a USB device. Remaining components of the App, which sometimes are the larger part of the app, can't be transfered using
These remaining components can be 100s of MB and even above 1GB (Sine Mora is 292MB, Walking Dead is 1.14GB)
Solution
Link2SD allows for moving these components to an external SD card in the phone world. Below I'll describe how to do this on the Amazon Fire TV with a USB device.
This post heavily relies on tweaking a post by sashavasko. Major kudos to him. Up to finding his post I was not successful in mounting in a way that Link2SD could see the mount. This was due to a change in Android 4.2+ where one App's mounting isn't seen by others.
Below is a step by step guide for running this. I've posted a script for automating this here : http://forum.xda-developers.com/showpost.php?p=54601505&postcount=33
Requirements: Root, Mouse, Terminal Application
Step 0 - Preparations : Format a USB device to the Ext4 File system and install Link2SD
Ext4
Link2SD refers to parititoning your SDcard to both Ext4 and FAT, this is not required on our USB device. All we need is an Ext4 partiton we can mount for Link2SD.
I had a high end USB device I used for FolderMount. For testing, I got a 16GB Lexar Jump Drive, which got decent reviews. $8 at Staples ( even less with the right coupon. Other sizes are also cheap). Both went into my Powered USB hub.
You can also partition a single FAT32 USB device to two partitons - FAT32 and Ext4. I have verified both options. Please note that for this second option, if you already have files on your FAT32 USB device, you'd have to first copy them to a backup, as the partitioning trashes your data. You will then need to restore the backed up files to the FAT partition.
Format/Partition your USB device to Ext4 using free MiniTool Partition Wizard Home Edition on your Desktop/Laptop. Below is a nice post on this (Refer only to step 1), you can find others. Please note that this refers to an SDCard. We will be doing this on a USB device.
http://forum.xda-developers.com/showpost.php?p=37405779&postcount=1
In partitioning, please verify the partitions are created as Primary. Also, not sure is this is required, but I didn't name my partitions.
There are also linux commands to do this - I didn't investigate these.
Stick the Ext4 partitoned USB device into your Amazon Fire TV and power it up. We will need the device in for Step 2.
Link2SD
Download Link2SD from the Google Play store, or sideload it
Make the directory Link2SD requires
Code:
su
mkdir /data/sdext2
exit
Step 1 - Fix adb localhost
Follow step 1 in sashavasko's post
http://forum.xda-developers.com/showpost.php?p=45102645&postcount=1
Note1:
You will need a terminal app for this
Note2:
This step should only be run once. Running multiple times can mess the /data/misc/adb/adb_keys file as the key values will concatenate with sashavasko's method. This will cause mounting at boot not to work. If you did this or not sure if you've done this, just erase the duplicate keys from the /data/misc/adb/adb_keys file (the end of a single key is "[email protected] ). Or, better yet, if you aren't seeing any other different keys there - simply su and copy /sdcard/.android/adbkey.pub onto this file.
Step 2 - Install scripts
Follow step 2 in sashavasko's post
http://forum.xda-developers.com/showpost.php?p=45102645&postcount=1
Note 1
Look for your Ext4 partitoned device after running:
Code:
adb shell cat /proc/partitions
You should find the Ext4 device under /device/block starting with sd.
For example: My first USB device is sda1, the Ext4 partitoned one was sdb1 (sdb2 when the Lexar drive was partitoned to FAT32 and Ext4).
You should be able to recognize the devices according to their partition sizes.
Note 2
The msd2.sh file should be changed to be:
Code:
#!/system/bin/sh
mount -t ext4 [COLOR="Purple"]/dev/block/[/COLOR][COLOR="Red"]sdb1[/COLOR][COLOR="purple"] /data/sdext2 [/COLOR]&& sleep 5 && /system/bin/vold
where the sdb1 device should be replaced by the device you located in Note 1.
Step 3 - Test the script and grant su permissions
Run this (no su command required, no path to the sd.sh file is required)
Code:
sd.sh
Verify you aren't seeing any errors. You will be granting SU permissions.
Run Link2SD. Go to the menu at the top right. Select "Storage Info" - Verify Link2SD recognizes the Ext4 partiton in the third line (under SD Card 2nd Part. ).
Step 4 - Auto Mount at initialization
For this I'm using the /system/etc/install-recovery.sh script which you should already have. This script loads at boot and calls /system/etc/install-recovery-2.sh (a non existent file).
Create a file at /sdcard/install-recovery-2.sh which contains
Code:
#!/system/bin/sh
/system/xbin/sd.sh
Now move the file to its place:
Code:
su
mount -o rw,remount /system
cp /sdcard/install-recovery-2.sh /system/etc/
chmod 755 /system/etc/install-recovery-2.sh
mount -o ro,remount /system
exit
Now Reboot (Long press remote Select + Play)
Step 5 - Link2SD ready to go
Open Link2SD to verify (as you verified before) that after boot Link2SD sees the Ext4 partiton.
Start moving files using Link2SD :
Select an App
Go to "Create Link" - You will be asked which file types to move. Check them all (not the paid option if you haven't paid).
Link2SD will show "Creating Link...", then an advert (in the non payed version) and then: Application files linked and moved to SD card
Note the expected storage change in the Amazon Fire TV's "About" menu option will be seen after Rebooting.
"Remove Link" works properly
"Move to SD card" is not relevant
Final Words
Don't use this to move system apps, or system-like apps
Responsibly for running this is solely on you. I am only describing what works for me.
Works great thanks
I'd love to see a standalone app for installing this.
Sent from my SM-N900V using XDA Premium 4 mobile app
The msd2.sh file mentioned in Step2/Note2 is used to create a fake external SD Ext4 partition for Link2SD.
You can also use it to create a fake external SD FAT partition at /storage/sdcard1 for FolderMount.
FolderMount automatically recognizes this partition and suggests this as the initial path for its destination path suggestion.
In my case - sda1 is the FAT partition (For me - a USB stick fully formatted to FAT32), and sdb1 is the ext4 formatted USB stick. The same should work with a single partitioned USB stick (but different sd* device names - see original post).
The updated msd2.sh file looks like:
Code:
#!/system/bin/sh
[COLOR="DarkGreen"]mount -t vfat /dev/block/[COLOR="Red"]sda1[/COLOR] /storage/sdcard1[/COLOR] && mount -t ext4 [COLOR="Magenta"]/dev/block/[/COLOR][COLOR="Red"]sdb1[/COLOR] [COLOR="Magenta"]/data/sdext2[/COLOR] && sleep 5 && /system/bin/vold
SaltyCookie_OnLoan2FM_SVE said:
The msd2.sh file mentioned in Step2/Note2 is used to create a fake external SD Ext4 partition for Link2SD.
You can also use it to create a fake external SD FAT partition at /storage/sdcard1 for FolderMount.
FolderMount automatically recognizes this partition and suggests this as the initial path for its destination path suggestion.
In my case - sda1 is the FAT partition (For me - a USB stick fully formatted to FAT32), and sdb1 is the ext4 formatted USB stick. The same should work with a single partitioned USB stick (but different sd* device names - see original post).
The updated msd2.sh file looks like:
Code:
#!/system/bin/sh
[COLOR="DarkGreen"]mount -t vfat /dev/block/[COLOR="Red"]sda1[/COLOR] /storage/sdcard1[/COLOR] && mount -t ext4 [COLOR="Magenta"]/dev/block/[/COLOR][COLOR="Red"]sdb1[/COLOR] [COLOR="Magenta"]/data/sdext2[/COLOR] && sleep 5 && /system/bin/vold
Click to expand...
Click to collapse
The one annoying thing about this is during boot it will read the entire partition. This in turn in my case makes booting the Fire TV really slow. Lets hope I dont have to reboot much because it now takes around 2-3 minutes to boot up.
MadFlava said:
I'd love to see a standalone app for installing this.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I 2nd this. This is as close as we're gonna get to downloading Apps, ets., straight to an attached external drive but I know enough about this stuff to be somewhat intimidated by the initial instructions. Not that they're not clear, it just looks like I'd have too many avenues to brick my box.
Still...very good work OP. Thanks again.
MarkBP said:
I 2nd this. This is as close as we're gonna get to downloading Apps, ets., straight to an attached external drive but I know enough about this stuff to be somewhat intimidated by the initial instructions. Not that they're not clear, it just looks like I'd have too many avenues to brick my box.
Still...very good work OP. Thanks again.
Click to expand...
Click to collapse
Come on guys, this is XDA developers
OK, I have this brewing. Should post it by tomorrow.
awesome. how easy is it to reverse this entire process? I'd really like to know the risks before I take the plunge
I think the process can be greatly simplified. On my computer I created install-recovery-2.sh with the two lines below:
#!/system/bin/sh
mount -t vfat /dev/block/sda1 /storage/sdcard1 && mount -t ext4 /dev/block/sda2 /data/sdext2 && /system/bin/vold
Then I connected via adb to the fireTV from my computer.
Then an adb push of install-recovery-2.sh to /sdcard and then did an adb shell to the fireTV from my computer and su once there.
Copied from install-recovery-2.sh from /sdcard to /system/etc
Did a chmod 755 on the file to make it executable and then rebooted and all seems to be working well with partitions recognized.
tselling said:
I think the process can be greatly simplified. On my computer I created install-recovery-2.sh with the two lines below:
#!/system/bin/sh
mount -t vfat /dev/block/sda1 /storage/sdcard1 && mount -t ext4 /dev/block/sda2 /data/sdext2 && /system/bin/vold
Then I connected via adb to the fireTV from my computer.
Then an adb push of install-recovery-2.sh to /sdcard and then did an adb shell to the fireTV from my computer and su once there.
Copied from install-recovery-2.sh from /sdcard to /system/etc
Did a chmod 755 on the file to make it executable and then rebooted and all seems to be working well with partitions recognized.
Click to expand...
Click to collapse
Just tried this, didn't work for me (mount not detected).
- tselling, is Link2sd working with this ?
- If someone is working succesfully with Link2sd using tselling's method please report back. This is indeed a shorter route.
failed for me for tselling method
SaltyCookie_OnLoan2FM_SVE said:
Just tried this, didn't work for me (mount not detected).
- tselling, is Link2sd working with this ?
- If someone is working succesfully with Link2sd using tselling's method please report back. This is indeed a shorter route.
Click to expand...
Click to collapse
Link2sd found ok and I linked sevzero without problems. Should note that I use sda1 and sda2 for fat32 in first primary partition and ext4 on second primary pzrtition of same usb flash drive. Any other setup would need to have different script to match your drive setup.
Sent from my SAMSUNG-SGH-I497 using Tapatalk
why does this need more than 1 partition to work anyways? Is it just because the app requires it for some weird reason?
edit: also which partition needs to be the bigger one? do the sizes matter? and does stickmount need to be disabled for this to work?
desc
meadtj said:
why does this need more than 1 partition to work anyways? Is it just because the app requires it for some weird reason?
edit: also which partition needs to be the bigger one? do the sizes matter? and does stickmount need to be disabled for this to work?
Click to expand...
Click to collapse
why does this need more than 1 partition to work anyways? - Link2sd description in play store:
What you need for linking apps:
● root permission.
● a second partition on your SD card.
You should have two partitions on SD card and both should be primary.
The first FAT partition is your standard SD card storage. The second partition is used for application files and can be ext2, ext3, ext4, f2fs or FAT.
You need to use a non-FAT file system (ext2, ext3, ext4 or f2fs) on your second partition in order to link app's private data files. Because the FAT file system (FAT16, FAT32 or exFAT) does not support UNIX file ownership or permissions and will cause a security breakdown of app's private files.
Link2SD Plus can move app's private data files if you have a non-FAT partition
Click to expand...
Click to collapse
So we may be able to use FAT (haven't tried it) but we will lose some moving capabilities.
From my testing - FolderMount does work with the ext4 partiton, so I need two partitions (or 2 usb sticks).
also which partition needs to be the bigger one? - No restriction. Allocate as per your decision and experience with storage costs of apps.
do the sizes matter? - Don't believe her. It does.
Sorry. Uncalled for. Apologies. Not personal. I just had to.
and does stickmount need to be disabled for this to work? - No, it doesn't
983
tselling said:
Link2sd found ok and I linked sevzero without problems. Should note that I use sda1 and sda2 for fat32 in first primary partition and ext4 on second primary pzrtition of same usb flash drive. Any other setup would need to have different script to match your drive setup.
Click to expand...
Click to collapse
Ok, let's try and minimize this. Could it be due to tselling using a single partitioned USB drive, while I'm using two drives ?
I need a report back from someone with a single USB drive who tried tselling's simpler approach. If it failed - Maybe tselling added something along that he wasn't aware of. If it passed - Maybe that's a requirement for the simpler approach.
In other news, the script to automate this is take slightly more than I thought, due to unix-android differences (I come from a unix background). That, and the fact that we may have a simpler solution is delaying me. Oh, also had to stay late at work yesterday, Oooh and the dog ate my laptop.
What about Foldermount?
What about FolderMount for Data and OBB files? Can I still use it with Link2SD on same card?
SaltyCookie_OnLoan2FM_SVE said:
Ok, let's try and minimize this. Could it be due to tselling using a single partitioned USB drive, while I'm using two drives ?
I need a report back from someone with a single USB drive who tried tselling's simpler approach. If it failed - Maybe tselling added something along that he wasn't aware of. If it passed - Maybe that's a requirement for the simpler approach.
In other news, the script to automate this is take slightly more than I thought, due to unix-android differences (I come from a unix background). That, and the fact that we may have a simpler solution is delaying me. Oh, also had to stay late at work yesterday, Oooh and the dog ate my laptop.
Click to expand...
Click to collapse
I think it has to do with the mount points. I have the ext4 partition mounted to /data/ext2 where I think link2sd looks. I think that you could use an entire usb stick with one partition as ext4 mounted to /data/ext2 but your script would change
FROM
##############################################################################################
#!/system/bin/sh
mount -t vfat /dev/block/sda1 /storage/sdcard1 && mount -t ext4 /dev/block/sda2 /data/sdext2 && /system/bin/vold
#############################################################################################
TO
###################################################
#!/system/bin/sh
mount -t ext4 /dev/block/sda1 /data/sdext2 && /system/bin/vold
###################################################
However, I have not tried this. I may try this later today since I have a second fireTV and usb stick arriving today.
also, I am planning to use foldermount with the first fat32 partition I created, but I haven't gotten that far as I want to use the Pro version but need the play store loaded first.
OOPS, I did forget one part "mkdir /data/sdext2" (otherwise the mount fails).
tselling said:
I think it has to do with the mount points. I have the ext4 partition mounted to /data/ext2 where I think link2sd looks. I think that you could use an entire usb stick with one partition as ext4 mounted to /data/ext2 but your script would change
FROM
##############################################################################################
#!/system/bin/sh
mount -t vfat /dev/block/sda1 /storage/sdcard1 && mount -t ext4 /dev/block/sda2 /data/sdext2 && /system/bin/vold
#############################################################################################
TO
###################################################
#!/system/bin/sh
mount -t ext4 /dev/block/sda1 /data/sdext2 && /system/bin/vold
###################################################
However, I have not tried this. I may try this later today since I have a second fireTV and usb stick arriving today.
also, I am planning to use foldermount with the first fat32 partition I created, but I haven't gotten that far as I want to use the Pro version but need the play store loaded first.
Click to expand...
Click to collapse
tselling said:
OOPS, I did forget one part "mkdir /data/ext2" (otherwise the mount fails).
Click to expand...
Click to collapse
i did that too but still didnt work, maybe bc i have 3 partitions. Fat then Ext2 then NTFS
meadtj said:
i did that too but still didnt work, maybe bc i have 3 partitions. Fat then Ext2 then NTFS
Click to expand...
Click to collapse
Sorry, the directory is /data/sdext2
Your mount command is:
mount -t ext4 /dev/block/sda2 /data/sdext2 && /system/bin/vold
Also I am not 100% sure that ext2 filesystem works. ext4 works for sure.