Database Users

A quick tutorial on how to flash the new Rotohammer roms (these have no bootstraps)

Ok here is a simple tutorial for any new to this tab stuff like I was yesterday.
I take no credit for this just wanted to help compile an easy solution.
It is so simple once you figure it out.
First download Odin v1.7 here unzip it and stick it on your desktop,
http://forum.xda-developers.com/attachment.php?attachmentid=478059&d=1293895557
Then download these files.
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
These zips need to be unpackaged to get to the .tar files. Pay attention as Winrar will see .tar as a .zip too. (read the file extensions or you can't select them in Odin.) Stick the 3 files (pit, modem,FmInsSD) into a folder on your desktop. (You no longer use the "Jme-hidden" file shown in the pic.)
Attach your tab to your computer, if you have windows 7 the drivers will be installed for you. If you don't you'll need to get them from here.
http://downloadcenter.samsung.com/c...G_USB_Driver_for_Mobile_Phones_v1.3.350.0.exe
launch Odin v1.7(if you get an error about some missing .dll file then you need to install the Microsoft .Net framework)
It should look like this once configured correctly:
MAKE SURE BEFORE YOU ADD YOUR FILES-THE TAB IS PLUGGED IN-YOU WILL HAVE A YELLOW COM BOX CIRCLED IN THE PIC IF IT IS CORRECTLY CONNECTED AND READY TO FLASH.
ALSO YOU MUST HAVE A BIG TRANGLE ON YOUR TAB WITH A DIGGING ANDROID (to do this power up the tab while holding down the down volume button)
Looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LOAD THE FILES AS SHOWN IN THE PIC THEY ARE CIRCLED IN RED
MAKE SURE REPARTITION IS CHECKED THE OTHER BOXES ARE CHECKED BY DEFAULT-LEAVE THEM HOW THEY ARE.
ONLY IF YOU HAVE EVERYTHING DONE. (DOUBLE CHECK)
HIT START
Do not touch anything or use your computer it takes about 5 mins to reboot your tab to the kies sync screen.
your done enjoy!
HIT ME SOME THANKS IF THIS WORKED FOR YOU.

Nice work.
You might want to specify that this is for gsm only as many may not be aware.
I on sprint so I guess I have to wait but it's good too see this kind of work being put out there.
Thanks

Back To Stock
Can someone just list the settings in odin to flash the T-mobile stock I want to get back asap tried to flash from pda and got error do you need to re-partition Please give me a hand??

JeffR714 said:
Can someone just list the settings in odin to flash the T-mobile stock I want to get back asap tried to flash from pda and got error do you need to re-partition Please give me a hand??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=855851
no repartition no pit file just pda and modem.

Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?

Hi Guys,
I'm from austria and have only one question: since i have flashed my tab to jm6 and higher, the bootloader is protected and it's not possible to go back to stock (in my case: hutchinson 3g austria).
now i have flashed to roto's jme, it work very fine! but he's writing, that's possible to go back to t-mobile stock (usa), no matter the bootloader was signed (protected) before flashing or not.
is there also a way to go back to others stock arround the world??? or is it only possible for t-mobile usa-users? thanks a lot!

Lucky_Charms said:
Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?
Click to expand...
Click to collapse
Same question here. What does JME-hidden.tar do? Do we need it? It's not in the link you provided (but all other files are).

naddie said:
Same question here. What does JME-hidden.tar do? Do we need it? It's not in the link you provided (but all other files are).
Click to expand...
Click to collapse
I think he edited it out it was the add on apks included in the stock rom you don't need it it is 2 samsung apps

Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?

gillebob said:
Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?
Click to expand...
Click to collapse
Real sure about that

Lucky_Charms said:
Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?
Click to expand...
Click to collapse
I update the first post of the firmware thread with all the changes.

gillebob said:
Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?
Click to expand...
Click to collapse
I doubt it. You either flash custom firmware and enjoy it, or sit in front of your computer hoping/waiting for Kies to update you
I think XDA has provided way more updates than Kies so far.

sorry, i am not able to find the CMC file, where can i download it ?

rotohammer said:
I doubt it. You either flash custom firmware and enjoy it, or sit in front of your computer hoping/waiting for Kies to update you
I think XDA has provided way more updates than Kies so far.
Click to expand...
Click to collapse
+1 to Roto's answer. Kies reads your firmware version when you connect the Tab and will only offer you an update if it recognises that there is an upgrade available for the firmware it sees on your Tab. This generally means that if you have flashed pre-release firmware which has development / test codes it won't offer you any of the official production upgrades (or any upgrades usually!). It is possible to fake your Tab's signature in Kies to make it flash official releases over dev/test firmware, do a search on the Samsung Galaxy S forums for how to do this.

Don't think so. So far kies have give me 2 updates. It work amazingly. Now is smother. Just my opinion.
Sent from my GT-P1000 using XDA App

zakwak said:
sorry, i am not able to find the CMC file, where can i download it ?
Click to expand...
Click to collapse
+1 I also cannot find the Addon-JME-Hidden.tar

it tried it without it and it works

I am new on the Android OS, Will this ROM enable the voice call feature?
I am getting a new ATT Tab and want to use my existing SIM.

ready to go?
Hi,
I want to flash, and have configured like following screenshot
I have actually rooted, stockrom
Can I start with these settings?
Thx & Regards,
Kangaroo

kangaroo72 said:
Hi,
I want to flash, and have configured like following screenshot
I have actually rooted, stockrom
Can I start with these settings?
Thx & Regards,
Kangaroo
Click to expand...
Click to collapse
Me too , i have same options i can t found CSC hidden.tar....what i have to do?
What file i have to put on CSC?

How do I change my xoom to US version?

Hello guys,
I have a Motorola Xoom and I can't wait to get ICS. When I browse the ICS topics, I see a lot of people who changed their xoom version to US, fe from Canadian to US. I don't know wich version I have, but it's not a US version, because I still don;t have the upgrade. If someone could maybe give a short description of how to change it to US, I would be so gratefull!!!

These steps worked great for me
http://lanlith.blogspot.com/2011/07/xoom-wifi-non-us-ie-ukcan-301-32-in-few.html
Just follow up to step 3 ...then just wait for the OTA updates
My xoom was the UK version... now running the oh so smooth ICS with US rom and lovin it!

Thanks! I only hope this will work for mine, since mine is probably Dutch or European and the description is for UK or Canadion Xooms. But i don't think that should be a proble. Anyway, I'm gonna try and pray that it works!

Got a problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help please?

Don't do it
Tried this last night and confirmed that it does not work. US image does not work on a Canadian device for some reason. Tried to post details here but the thread seems to have been deleted.

I believe the method on this thread is the easiest, and you preserve root
http://forum.xda-developers.com/showthread.php?t=1446469

echus said:
Tried this last night and confirmed that it does not work. US image does not work on a Canadian device for some reason. Tried to post details here but the thread seems to have been deleted.
Click to expand...
Click to collapse
It works fine. I did it myself a few months ago, flashing my Canadian Xoom with the US ROM, after which I was obtaining the US OTA updates. I don'T remember which procedure I used however, but I can confirm that there's a working procedure somewhere here on the forums.

I got it unlocked and every image would flash ok, apart from system.img. I really don't understand why. I followed the tutorial word for word and obviously I was doing something right or I wouldn't have been able to flash the other images.
In the end I just installed CWM and flashed Team EOS ICS from the recovery.

Worked Great and First Time on my brand new UK Wifi Xoom
Just bought a Wifi only xoom today from carphone warehouse and was a bit dubious about doing this, not wanting to brick my brand new Tablet.
I thought stuff it though, if doesn't work it can go back in the same afternoon that I bought it and I'll get a Refund (was last one in stock, due to them selling them for £249)
Anyway,
Worked a charm once I found the folder where the fast boot was hiding within the zip file.
Took a little while to do, but dead easy
The one thing I did wrong at first was not noticing that each image file had the same filename name written after FLASH and before the filename.img too
(i.e written twice on the command, must be going blind in my old age)
The longest part was going through all the updates on the xoom until finally getting ICS.
Working great now though.
Thanks guys for a great tutorial.
Dean

Are you HK or taiwan version? These problem is almost in these two version.

echus said:
Tried this last night and confirmed that it does not work. US image does not work on a Canadian device for some reason. Tried to post details here but the thread seems to have been deleted.
Click to expand...
Click to collapse
Were you able to convert yours? I've got a US wifi version, but my dad has a Canadian version and he wants me to convert it to a US version for him.

What happened with the system.img the screen shot seems to suggest it started? Couldn't see any error?
It takes longer to push the system.img over if I recall correctly its a much larger file ...
Edit oh, checked again and saw the fail. Odd. I can probably find and upload the system.img that I used if it would help.
Sent from my HTC Desire using xda premium

matthewsammut said:
These steps worked great for me
http://lanlith.blogspot.com/2011/07/xoom-wifi-non-us-ie-ukcan-301-32-in-few.html
Just follow up to step 3 ...then just wait for the OTA updates
My xoom was the UK version... now running the oh so smooth ICS with US rom and lovin it!
Click to expand...
Click to collapse
Can I use on MZ605? Is a wifi/umts 3g by H+....
Sent from my MZ605 using xda premium

matthewsammut said:
These steps worked great for me
http://lanlith.blogspot.com/2011/07/xoom-wifi-non-us-ie-ukcan-301-32-in-few.html
Just follow up to step 3 ...then just wait for the OTA updates
My xoom was the UK version... now running the oh so smooth ICS with US rom and lovin it!
Click to expand...
Click to collapse
Sent from my MZ605 using xda premium

ATIV S T889M - ROM Needed! Any ROM!

I accidentally flashed all partitions with WOLF's fake rom, which has erased my phone. I can find factory roms for the I8750, but I have the Canadian SGH-T889M.
I just need to flash it with some full rom to get it up and running again - anything. Samsung has no full rom, and I think WOLF took down most of his links. Can someone help me get a copy of a Samsung ATIV S T889M rom? Otherwise, I'm stuck with a brick.

TaylorofCanada said:
I accidentally flashed all partitions with WOLF's fake rom, which has erased my phone. I can find factory roms for the I8750, but I have the Canadian SGH-T889M.
I just need to flash it with some full rom to get it up and running again - anything. Samsung has no full rom, and I think WOLF took down most of his links. Can someone help me get a copy of a Samsung ATIV S T889M rom? Otherwise, I'm stuck with a brick.
Click to expand...
Click to collapse
No ROM is leaked for this model. You should go to service center.
There is a safe method to flash customs for carrier models - MBN Creator. I don't know why people still use fakeROMs.

http://mobilefileserver.com/category.aspx?get=24173
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

WOLF - You're completely right. I should have used MBN creator. I tried, and it didn't work. I realise now that I probably had to factory reset my phone. If I have to take it to a service center, I may as well just put it in a drawer, because repair costs tend to be crazy, at least in Canada, unfortunately, and I just grabbed an Ativ S NEO on eBay for $200.
Spavlin - Thank you so much for the mobilefileserver link. It's a paid service and it looks super sketchy, but I may sign up. I'll let you know how it goes.

spavlin said:
http://mobilefileserver.com/category.aspx?get=24173
Click to expand...
Click to collapse
that is a link to a rom where you need to pay for , if you have it on your pc maybe upload it to something NON paid.

I have the ROM!
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!

thank you taylor for sharing the rom. its greatly appreciated.
so your ativ is all good now?

oh my goodness! great news! Thanks a lot for sharing this rom!
---------- Post added at 10:06 AM ---------- Previous post was at 09:10 AM ----------
TaylorofCanada said:
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!
Click to expand...
Click to collapse
can you tell us which build is it? 8 or 8.1?
also, which csc file did you use?

TaylorofCanada said:
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!
Click to expand...
Click to collapse
Hi, could you upload the other files too if you have access to them?

To answer your questions:
- The posted rom is Windows Phone 8.0.
- I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
- I do have access to other files, just let me know what you need and I'll do my best. If you want to help cover the cost of my membership, that's also appreciated; just message me.

TaylorofCanada said:
To answer your questions:
- The posted rom is Windows Phone 8.0.
- I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
- I do have access to other files, just let me know what you need and I'll do my best. If you want to help cover the cost of my membership, that's also appreciated; just message me.
Click to expand...
Click to collapse
pm me your PayPal number and i send you Abit , please dload everything for the ativ s phones , all wp roms and there csc files you can get your hand on.
i have a paid 2tb storage space and i can reupload them there for all to use (on my storage public dload is free)

spavlin said:
Click to expand...
Click to collapse
Sure thing! I'll add it to my list. So what's the binary downloader? Is that just a newer version of the SMD tool?

@TaylorofCanada can you re-post the first two files at http://mobilefileserver.com/category.aspx?get=18865 ?
Also, if you have time. http://mobilefileserver.com/download.aspx?get=253844 would be very useful. With this, I think I can enable Mass Storage mode on the AT&T 8X

compu829 said:
@TaylorofCanada can you re-post the first two files at http://mobilefileserver.com/category.aspx?get=18865 ?
Click to expand...
Click to collapse
Sure, I just need my download limit to reload. Might be a few days at this rate.

WP8 SMD Binary Downloader 3.54
I wasn't able to get it to work with my 8.0 ROM and custom CSC/MBM on my Ativ S Neo. SGH-I187.

TaylorofCanada said:
To answer your questions:
I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
Click to expand...
Click to collapse
what did you use for these values in MBN creator on your telus phone?
CSC_Country=0x002C;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=604;
And
[HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
"PhoneROMLanguage"="0809"

o2neouzr said:
what did you use for these values in MBN creator on your telus phone?
CSC_Country=0x002C;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=604;
And
[HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
"PhoneROMLanguage"="0809"
Click to expand...
Click to collapse
I never bothered with the Phone Language,
But I changed the country code and the time zone:
Code:
CSC_Country=0x0051;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=2BC;

TaylorofCanada said:
I never bothered with the Phone Language,
But I changed the country code and the time zone:
Code:
CSC_Country=0x0051;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=2BC;
Click to expand...
Click to collapse
cool thanks. and what version of windows phone 8.0 is the rom your posted above? GDR2? GDR3?

OPT came with Oxygen OS 2.0.3 preinstalled

Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

joshua_07 said:
Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
View attachment 3478335
Click to expand...
Click to collapse
Explaining it here would be quite a lot, so there´s a great guide here: http://forum.xda-developers.com/showthread.php?t=2450045
Let me know if you need some additional help!

If the method above is to comicated you can flash TWRP and make a system backup and upload it here. I can go ahead and make a flashable zip with that. Just backup your system and nothing else (privacy reasons).

Can you check please, is there a russian language?

dbbnzzz said:
Can you check please, is there a russian language?
Click to expand...
Click to collapse
No Russian on mine with 2.0.3

Is there Spanish language? Does anyone know the changes from oxygen OS 2.0.2?
Sent from my ONE A2001 using XDA Free mobile app

You don't even need to flash anything.
Just boot twrp via fastboot and back up the system.
I think there are several people here who'd like to try.

dbbnzzz said:
Can you check please, is there a russian language?
Click to expand...
Click to collapse
I'm not sure. Isn't this Cyrillic script in the screenshot? http://i.imgur.com/EuOJfCV.png
sonny34 said:
Is there Spanish language? Does anyone know the changes from oxygen OS 2.0.2?
Sent from my ONE A2001 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, there's an Español option. http://i.imgur.com/JJr8gVE.png
Jann F said:
You don't even need to flash anything.
Just boot twrp via fastboot and back up the system.
I think there are several people here who'd like to try.
Click to expand...
Click to collapse
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.

joshua_07 said:
I'm not sure. Isn't this Cyrillic script in the screenshot?
Click to expand...
Click to collapse
It's Ukrainian language and it was there from 2.0.0. Seems they still ignore Russians.
Anyway, thanks for the reply.

joshua_07 said:
I'm not sure. Isn't this Cyrillic script in the screenshot? http://i.imgur.com/EuOJfCV.png
Yes, there's an Español option. http://i.imgur.com/JJr8gVE.png
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.
Click to expand...
Click to collapse
You would need to fastboot oem unlock to unlock the bootloader then use fastboot boot twrp.img(image name for recovery) and then go to backup option and then select system, reboot your phone after and pull the twrp folder form your device.

joshua_07 said:
Hi,
ordered it on 09/14 directly from OnePlus and received it today in Germany.
Haven't seen a mention of v2.0.3
Any questions or should I test something?
Someone on Reddit asked me to upload the system folder.
How do I export that folder?
View attachment 3478335
Click to expand...
Click to collapse
Congrats and welcome to the family [emoji1]
Sent from my ONE A2003 using Tapatalk

joshua_07 said:
Do I need to root the device or open the bootloader to accomplish any of the options?
Would like to keep my device stock as much as possbile.
Click to expand...
Click to collapse
You are from Germany, right? Would it help you if I would go through the steps with you, in German? PM me!

You would need to unlock the bootloader, but not more.
If you boot the recovery only, it will not get installed.
You can then lock it again afterwards.

in Spain people how ordered it from oneplus web site came with 2.0.3 too.....
so, what are they waiting for the OTA?

Anyone managed to upload nandroid yet of 2.0.3?

We need an nandroid of this. Every phone that came with 2.0.3 and is modified makes the home button not work at all.

Lostatsea23 said:
We need an nandroid of this. Every phone that came with 2.0.3 and is modified makes the home button not work at all.
Click to expand...
Click to collapse
My OPT came with 2.0.3 preinstalled. I just made a backup using TWRP before going through the initial setup of the phone. I don't know where people upload such big files to be honest. This is my first post on this forum. Someone from the OnePlus forums told me to check out XDA.

I'll explain it for you just take the nandroid and upload it to google drive I know it's tough but I'd appreciate it so much!

Lostatsea23 said:
I'll explain it for you just take the nandroid and upload it to google drive I know it's tough but I'd appreciate it so much!
Click to expand...
Click to collapse
It's uploading as we speak. The file is 1.15 GB and my upload speed is only about 10Mbit/sec.

Thank you, how long till its done ?
I'm at work so it'll probably be done by the time I'm out but I really appreciate it. We all do.
There's definitely a file that's causing the home button to not work when modifying the system with a new kernel. Or drivers or something of the sort.

BlackBerry Priv Autoloader - QC8992 AAC826

Hi everyone,
The moment you have been waiting for... A Priv OS autoloader and now a dump of the system files..
I am fairly inexperienced at XDA, but have been around BlackBerry enthusiast forums for years under the name mrfreeze.
I have made this post on CrackBerry forums too, but thought that you all might be able to help out more.
Link to CrackBerry thread: http://forums.crackberry.com/android-apps-f444/blackberry-priv-autoloader-qc8992-aac826-1049300/
*WARNING: THIS CAN BRICK YOUR DEVICE WITH NO FIX AT THIS TIME.*
Only works with this device - ShopBlackBerry STV100-1 (na variant with no subvariant)
OS - AAC826
What I bring you is an OS autoloader for the BlackBerry Priv. My understanding that this is meant for the ShopBlackBerry (possibly Amazon) variant of the Priv only. It checks for has a script in the batch file checks for the variant and subvariant, if these don't match it will error. Removing the check and installing it on a non-supported Priv WILL brick the device, this has been confirmed.
This is destructible load and will wipe all data.
I know for sure it does not work on AT&T Priv STV100-1 and will brick it.
Using the fastboot.exe file I determined a few variant names.
I would like to see what subvariants are for each model. I will create a chart as we get more information.
ATT - The autoloader will not work with this model and will brick the device.
variant - na
subvariant - att
ShopBlackBerry - The autloader will work with this model.
Variant - na
Subvariant - (blank)
I haven't had much time to this point to mess around with the files, but will continue to look through them.
Mega files: https://mega.nz/#!XwwgXKSa!jW5QtNnqh90Inx676t9bE1b6TOYlUt3WqOMTKPoBC_4
BlackBerry Android Support Software (Drivers): https://swdownloads.blackberry.com/Downloads/entry.do?code=4EE0932F46276313B51570F46266A608
Holding down the power button and volume down key for 30 seconds will take you to the BlackBerry Bootloader menu.
I will continue to update OP as we learn more.
Oh and if you brick your device you are out of luck at this point. So again don't screw around with this unless you know what you are doing or have a money and time to waste.
- Mr. Freeze
Edit: I have now dumped the system files. Have fun!
Here is the link to the system files: https://mega.nz/#!z5AGyaaS!cxVwt_pSCBdTiPCb_pVhNxATV5xl1xX8_-JhCLzuoaU
P.S. Thanks Usman for help procuring this!

This file is the real deal. Please be very careful if you attempt to test loading on your Priv. IT WILL BRICK YOUR PHONE.
Interested in seeing the outcome with this...

MePiikan LzBolaz said:
This file is the real deal. Please be very careful if you attempt to test loading on your Priv. IT WILL BRICK YOUR PHONE.
Interested in seeing the outcome with this...
Click to expand...
Click to collapse
This. Be very careful.
Do not edit the batch file to skip the variant check, I figured this out the hard way.
It should work fine on a the proper variant though, which is the ShopBlackBerry unlocked devices.

Don't take this as a definitive answer that the Priv is coming to T-Mobile or Sprint, but I found their boot animations in here.
Also found Verizons, which we know is coming.
Verizon's is an animated boot image without audio. (Old Verizon logo though)
T-Mobile's is a static image and it includes the default T-Mobile ringtone.
Sprint's is an animated boot image without audio.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

STV100-4 Europe ?

wolfgart said:
STV100-4 Europe ?
Click to expand...
Click to collapse
What do you mean?
If you're asking if this will work with that device, then the answer is no. It is only for the STV100-1 North America with a subvariant of none. Which means it is factory unlocked from ShopBlackBerry or possibly Amazon.

I have updated the OP to include a dump of all the system files.

mrfreeze574 said:
Don't take this as a definitive answer that the Priv is coming to T-Mobile or Sprint, but I found their boot animations in here.
Also found Verizons, which we know is coming.
Verizon's is an animated boot image without audio. (Old Verizon logo though)
T-Mobile's is a static image and it includes the default T-Mobile ringtone.
Sprint's is an animated boot image without audio.
Click to expand...
Click to collapse
Hope sprint gets it soon...

MatthewB92 said:
Hope sprint gets it soon...
Click to expand...
Click to collapse
A sprint customer second it!

excuse me but what is an autoloader?

hillin said:
excuse me but what is an autoloader?
Click to expand...
Click to collapse
It is something related to BB10. Basically, it's an exe that lets you manually install a version of BB10 to your Blackberry device. They are often used when a version of BB10 is leaked before the updates roll out to phones. I have used them on my Z30 before.

Xaiux said:
It is something related to BB10. Basically, it's an exe that lets you manually install a version of BB10 to your Blackberry device. They are often used when a version of BB10 is leaked before the updates roll out to phones. I have used them on my Z30 before.
Click to expand...
Click to collapse
Thanks for your explaining! So to my understanding, an autoloader is equivalently a system image, right? What's special between this autoloader and the one already installed in a ShopBlackberry -1 variant?

hillin said:
Thanks for your explaining! So to my understanding, an autoloader is equivalently a system image, right? What's special between this autoloader and the one already installed in a ShopBlackberry -1 variant?
Click to expand...
Click to collapse
There is no difference between this one and the stock one. It's just the first one that's gotten out.

Okay, so it's just for the record. Thx again

Baseband for stv100-1
hi, i dialed *#*#4636#*#* then choose USA Band and now my Priv doesnt have signal in 2g and 3g, would give me the flash file for baseband....

dear @mrfreeze574 would you give me an autoloader link with radio.img file.
i said my problem in previous link and my priv is not working in 2g and 3g....
Best regards

dear @mrfreeze574 would you give me an autoloader link with radio.img file.
i said my problem in previous link and my priv is not working in 2g and 3g....
Best regards

So I'm a big into android roms hacks etc. But am new to the autoloader. I have th Amazon variant of the shopblackberry priv with the newest 16MB update. Which has basically made my phone not so good... will the autoloader allow you to downgrade? I don't want to try without knowing if it will work...thanksd

runningwarrior08 said:
So I'm a big into android roms hacks etc. But am new to the autoloader. I have th Amazon variant of the shopblackberry priv with the newest 16MB update. Which has basically made my phone not so good... will the autoloader allow you to downgrade? I don't want to try without knowing if it will work...thanksd
Click to expand...
Click to collapse
yes you can

hey
i flashed this rom, when the phone bootup,my google account dont work and this phone locked with google frp