Database Users

[SOLVED] CIFS support

A noob question support. Is there a CIFS support in the 2.6.32.21-gbe90714 kernel or a suitalbe cifs.ko file that one could use with the Cifsmanager app?
I am a bit lost here. I downloaded the DHD kernel source released, but had no luck locating the cifs.ko file. And I have no idea how to compile one myself. Can someone pinpoint me in the right direction?
update:
found some instructions here http://forum.xda-developers.com/showthread.php?t=783117 so I will see if I can get it working
update 2:
i have been able to build cifs.o (no cifs.ko was produced ) from the kernel provided by HTC, but it fails with insmod. The problem might be (besides that I have only a vague idea what am I doing) that the downloaded kernel is 2.6.32-g5ed1769 and my phone is running kernel 2.6.32-gbe90714.
Also compiling the kernel ends with this error
make[3]: *** No rule to make target `drivers/input/touchscreen/ntrig.o', needed by `drivers/input/touchscreen/built-in.o'. Stop.
Thats where I got stuck.
I have attached the file cifs.o produced.
Updare 3: Solved - see attachment in post http://forum.xda-developers.com/showthread.php?p=8865419#post8865419

Support/Troubleshooting forum sub section is needed, this Desire HD general is becoming a Desire HD trashcan..

M_T_M said:
Moved to general. Not a DEV thread.
Cheers,
Click to expand...
Click to collapse
I placed in DEV since it deals with kernel compilation. Maybe it should be moved to theme and apps as I am trying to get Cifsmanager app working on DHD.

Small update: I have managed to get a cifs.ko from kernel 2.6.32.17 from G2 partially working. I have HEX edited the file and changed to my kernel version.
I can insmod the file and mount drive without a problem. I can than access the mounted drives a browse the folders, but when I try to open the file I get an error.
I do not seem to be able to find a 2.6.32.21 kernel compiled cifs.ko which I believe might work with HEX updating "-gbe90714".

*push*
looking for the right cifs.ko as well :\ would be really nice to be able to mount cifs shares without custom rom...

anyone got CIFS working on stock ROM?

CIFS working on 2.6.32.21-gf3f553d
here is a working cifs.ko for DHD kernel 2.6.32.21-gf3f553d
Code:
su
insmod slow-work.ko
insmod cifs.ko
insmod nls_utf8.ko
It's a hex edited and --strip-debug cifs to educe file size of the version from MikeMelbourne. http://forum.xda-developers.com/showpost.php?p=9780217&postcount=7
Works fine on my DHD (samba access and video playback with V Player).

nxtwrld said:
here is a working cifs.ko for DHD kernel 2.6.32.21-gf3f553d
Code:
su
insmod slow-work.ko
insmod cifs.ko
insmod nls_utf8.ko
It's a hex edited and --strip-debug cifs to educe file size of the version from MikeMelbourne. http://forum.xda-developers.com/showpost.php?p=9780217&postcount=7
Works fine on my DHD (samba access and video playback with V Player).
Click to expand...
Click to collapse
Thanks for this, it works fine when I insmodded all the .ko's you zipped (that I placed in system/lib/modules/). On reboot though I cannot use cifs manager unless I insmod again. Do I need to insmod everytime i reboot?
Sent from my Desire HD

nxtwrld said:
It's a hex edited and --strip-debug cifs to educe file size of the version from MikeMelbourne. http://forum.xda-developers.com/showpost.php?p=9780217&postcount=7
Click to expand...
Click to collapse
I understand the hex edit - would you mind telling me how you did the --strip-debug - I'd like to do the same.
They were compiled on a headless PII 400 MHz running Ubuntu Edgy Eft server.
-Mike-

You just need to have the android ndk, which I supposed you have since you have bee able to compile the kernel. So just run
Code:
/path/to/android-ndk-r4b/build/prebuilt/linux-x86/arm-eabi-4.4.0/bin/arm-eabi-strip --strip-debug /path/to/cifs.ko
you have to modify the path to cifs.ko a and android-ndk-r4b
I have bee trying to compile the kernel my self on kubuntu, but always finished with an error, so I just ended up hexediting other files.
Thanks for your files. I have been waiting for a working samba mount to stream my videos from NAS!!

keemyb said:
Thanks for this, it works fine when I insmodded all the .ko's you zipped (that I placed in system/lib/modules/). On reboot though I cannot use cifs manager unless I insmod again. Do I need to insmod everytime i reboot?
Sent from my Desire HD
Click to expand...
Click to collapse
I am afraid it has to be insmoded every time on boot. You can automate it with Gscript or Tasker apps.

Thanks @Nxtwrld for the strip-debug advice. The HTC kernel never compiled with my phone's config.gz - after each failed compile I would have to edit .config and disable the item responsible for the build failure. I ended up compiling the module by itself.
Sent from my Desire HD using XDA App

Final compile - optimised versions against NDK R5.
Against the new Android NDK R5 I have just compiled:
* tun.ko - 18 KB
* slow-work.ko - 16 KB
* cifs.ko - 269 KB
* nls_utf8.ko - 4 KB
I have also debug stripped them - resulting in a total module size of 304 KB instead of 3.2 MB.
This time I compiled them on Ubuntu 10.10 instead of the ancient Ubuntu 6.10 I had been compiling on.
Again, these are for 2.6.32.21-g66cfb7a - feel free to hex edit them. I have tested both tun & cifs and they work.
Thanks again nxtwrld for the strip-debug advice.

Can you do the same for kernel 2.6.32.21-g3d0aaf ?

here you go.

thank you! Works very good!
nxtwrld said:
here you go.
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App

I've tried for hours so far to understand more about the android and how to install the files inside 2.6.32.21-gf3f553d.zip.
I have the Desire HD with stock Orange rom and that kernel, i literaly have no idea how to install thease moduals onto the phone.
My desire hd is rooted and is S-on I've tried things like Kernel Update Utility and also just trying to simply copy and paste the files into system/lib/modules didnt work since astro didnt let me paste.
If it wasnt nearly 1am and i wasn't trying for the past 3 hours i would have done more reading. I know its something simple im missing, just can't figure out what the process is to installing thease modules is. First Android phone, first day with it as you can probebly tell.
Any help will be apreciated.
Thanks

arielc said:
I've tried for hours so far to understand more about the android and how to install the files inside 2.6.32.21-gf3f553d.zip.
I have the Desire HD with stock Orange rom and that kernel, i literaly have no idea how to install thease moduals onto the phone.
My desire hd is rooted and is S-on I've tried things like Kernel Update Utility and also just trying to simply copy and paste the files into system/lib/modules didnt work since astro didnt let me paste.
Click to expand...
Click to collapse
There's a free app in the market called "mount /system (rw / ro)" that can make your /system read-write (rw) or read-only (ro). After setting rw - you should be able to copy the *.ko files into /system/lib/modules.
Another alternative is to copy the *.ko files onto your sdcard (/mnt/sdcard).
You can then use an app (i.e. "Terminal Emulator") to enter these commands:
Code:
su
insmod /mnt/sdcard/slow-work.ko
insmod /mnt/sdcard/cifs.ko
insmod /mnt/sdcard/nls_utf8.ko
Alternatively, you can open CifsManager, open the Settings and specify a custom path to your kernel modules (i.e. in /mnt/sdcard). The recent version allows you to specify multiple modules, separated by colons. e.g:
Code:
/mnt/sdcard/slow-work.ko:/mnt/sdcard/cifs.ko:/mnt/sdcard/nls_utf8.ko
Hope this helps.

You should also check you kernel version and verify, that you are really running pin this kernel. I have no idea what the kernel for Orange branding is....

Amazing thanks, i did it with the terminal emulator method. First time i tried it, it wouldnt work. A restart later and i've rentered the comands and my computer drive is mounted. Works like a dream, thanks loads for th hex edited files and the walkthrough with diffrent options was so very helpful.

[MOD] XXJVK unlimited Browser Tabs

Hi all,
It is the stock XXJVK (Gingerbread) internet browser modified to open more than 4 windows.
Actually you can visit up to 16 different web site at the same time but you'll probably miss memory before
Note:
Once you reach the 8th windows, continue to press the "new button" and it will open an extra new window even thought that the counter will not display more than 8
For those who remain in froyo,see my thread for XWJS8:
[MOD] increased Stock XWJS8 browser limit
to install :
-copy the apk to your sdcard
-Delete the old Browser.apk in /system/app
-Place the new Browser.apk in there
Note:
Don't forget to be superuser and to mount the partition as read-write :
for stock kernel :
$su
#mount -o remount,rw /dev/block/system /system
#cp /sdcard/Browser.apk /system/app/Browser.apk
#exit
$exit
for CF-ROOT kernel, (thanks to ramad)
su
stop (phone will freeze, that's OK just move on)
busybox mount -o remount,rw /dev/block/system /system
cp /sdcard/Browser.apk /system/app/Browser.apk
exit
exit
adb reboot
Eric,
in Sri lanka.

Thanks, just what i have been looking for

Nice work thanks!
Sent from my GT-I9000 using XDA App

Thanks man. needed this. But for me the line with /dev/block/system i had to remove that. Then it worked.

Jobiza said:
Thanks man. needed this. But for me the line with /dev/block/system i had to remove that. Then it worked.
Click to expand...
Click to collapse
Hi,
Do you mean you did not use the whole line (mount....) ?
So , your /system partition could permanently be mounted as read write.
Are you using any tools or specific rom ?
Eric ,
in Sri Lanka.

will this going to work wirh jpx rom also ??
thx
Sent from my GT-I9000 using Tapatalk

claustrox said:
will this going to work wirh jpx rom also ??
thx
No I've tried gingerbread browsers on earlier roms before ... they don't work.
There are plenty of extra window modded browsers that do tho. The author of this thread made a js8 version I believe that will work
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Stock XXJVK, Voodoo GB hack Kernel, JVE GB Modem

thank you man !

can this also be done by using the root explorer app?

tried the adb method but it doesnt work for me
Have done it word for word like the method above for cf root but not working, phone does connect and reboot at the end but still have the 4 windows

Jobiza said:
Thanks man. needed this. But for me the line with /dev/block/system i had to remove that. Then it worked.
Click to expand...
Click to collapse
Had to do this to make it work
thanks

hey eric...thanks your exellent work....im also sri lankan.. keep it up bro......

I have a question is there the UserAgent hack in this one?
If not please add it to your version

Cool, good job man!

[Q] hw_config command is correct? im noob...

I'm first time touching Android so just wanna confirm manual install and hw_config command is correctly.
after i push x8gesture,x8mddi,x8oc.ko to /system/lib/modules and i need change permission to (as below) for the modules?
**
*
*
in hw_config
# x8 overclock
insmod /system/lib/modules/x8oc.ko
sleep 2
echo x26 > /proc/x8oc
# dx: our modded touchscreen driver
insmod /system/lib/modules/x8gesture.ko
# fix mddi lags
insmod /system/lib/modules/x8mddi.ko
all the step is correct?
Thanks for all can teach me if incorrect.

Yes it is correct
Sent from my X8 using Tapatalk

same with dbts

where or how should I change the permissions? because when i want dt i loose oc and mddi and backwards. i know i ´m total noob but thanks in advance

Thanks dbts & cruizz for reply. Now i know that all is correct
is anyway can let me learn how to modify my X8 themes? i hope that i can do by myself and share out to all.

you should check your touchscreen driver to see if it uses synaptic digitizer or cypress digitizer..if it is cypress,x8gesture will not work..new x8 uses cypress digitizer.

[Guide] Expanding the limit of multitouch points (root needed)

Let's cut the crap. Seems like somebody on a Chinese forum figured out the way to apply the mod to MM2. I just translate it into English.
1. Download the attachment and unzip milestone2_more.ko to the root of sd
2. mount /system/ r/w
3. copy milestone2_more.ko to /system/lib/modules/
4. open terminal emulator
5. input the following command
su
chmod 644 /system/lib/modules/milestone2_more.ko
insmod /system/lib/modules/milestone2_more.ko touch_num=6
(the guy said if you choose a number greater than 6 the system will crash)
now you should get a 6-point-multitouch
original thread: http://bbs.gfan.com/android-1997547-1-1.html

Thank you soooooooo much! )))

Works but MT is still buggy...

oh my god.. thank you, it works.
5 is more than enough

OMG!! You made my day!
Sent from my A953 using XDA Premium App

Is this permanent? Or it'll go away when we reboot?
Sent from my A953 using XDA App

It will go away when you reboot, but its not a big deal to use the command again
Sent from my A953 using XDA Premium App

Just make a init.d script to load it up when the system boots and you won't have to worry about it again..

Just did this, but I think i wrote it wrong. Please correct me
I created a blank file and wrote inside it:
insmod /system/lib/modules/multitouchfix.ko (I replaced the name)
And saved the file as 99multitouchfix inside /system/etc/init.d/
I also fixed permissions for both files
Sent from my A953

Is it working Aragorn?

Thank you. I'll try it when I get home!

inheme said:
Is it working Aragorn?
Click to expand...
Click to collapse
Nope. The module works, but not the init.d script

you can use autostart from Market

AragornPE said:
Nope. The module works, but not the init.d script
Click to expand...
Click to collapse
Try this script:
Code:
#!/system/bin/sh
# Load 5 finger multitouch module
insmod /system/lib/modules/defy_more.ko
Also note that the first touch after reboot is delayed.

dangpzanco said:
Try this script:
Code:
#!/system/bin/sh
# Load 5 finger multitouch module
insmod /system/lib/modules/defy_more.ko
Also note that the first touch after reboot is delayed.
Click to expand...
Click to collapse
I'll try that as soon as my M2 wakes up, long day for it today =P

Actually,the patch is developed by korean , the XDA thread is http://forum.xda-developers.com/showthread.php?t=1162327
Autoload after reboot: copy install-recovery.sh to /system/etc and set rwxr-xr-x .
If you wanna change the touch point limit , open install-recovery.sh with text editor , change the number that follows "touch_num=". The range is 1~10.
My own test shows more than 6 touch points will NOT lead to system crash , but make it back to 2 points...orz. Since the same patch on D2/D2G/DEFY enable up to 10 points, why
m2 cound not
Ah, forgot to say , the autoload patch is ported from http://bbs.gfan.com/android-1997547-1-1.html

Neither autostart or init.d script worked. Going to try the install recovery
Sent from my A953

Install recovery didn't work either
Maybe I'm doing something wrong?
Sent from my A953

AragornPE said:
Neither autostart or init.d script worked. Going to try the install recovery
Sent from my A953
Click to expand...
Click to collapse
Did you set the permission properly，both milestone2_more.ko and install.sh.

All works fine, both the milestone2_more.ko and the install recovery, no problem at all, have 4 MT points now

Porting Morrison for cousin Ruth

Hi all. If anyone is willing to help please assist me, im currently trying to upload cm 7 Morrison files for our beloved Ruth devices. I still haven't figured out how the 2nd init injector works yet.
For all charm users we can always branch the files and delete the MOTO.ROTATOR line for your devices.
If you have time, patients and sh¡t loads of guts please help or add links for me to checkout.
EVEYTHING IS APPRECIATED! :fistbump:
DEV Device: MB511 (deodexed)
Current System: MT27i xICS
Long Live: V9 Ferrari Rom
code.google.com/p/motorola-flipout-files

Ok if anyone know of any other motorola developers please let me know.
DEV Device: MB511 (deodexed)
Current System: MT27i xICS
Long Live: V9 Ferrari Rom
code.google.com/p/motorola-flipout-files

ruth(MB511) sensors in init.mapphone30_umts.rc
# sensor interface
chown compass compass /dev/lis331dlh --> not found
chmod 660 /dev/lis331dlh
chown compass compass /dev/kxtf9 --> found
chmod 660 /dev/kxtf9
chown compass compass /dev/akm8973 --> not found
chmod 660 /dev/akm8973
chown compass compass /dev/sfh7743 --> found
chmod 660 /dev/sfh7743
chown compass compass /dev/akm8973_dev --> found
chmod 660 /dev/akm8973_dev
chown compass compass /dev/akm8973_aot --> found
chmod 660 /dev/akm8973_aot
chown compass compass /dev/airc --> not found
chmod 660 /dev/airc
so ruth(MB511) sensors should be /dev/kxtf9, /dev/sfh7743,/dev/akm8973_dev, /dev/akm8973_aot
but Morrison sensors in libsensors/nusensors.h
#define AKM_DEVICE_NAME "/dev/akm8973_aot"
#define ACCEL_MODE_NAME "/sys/class/i2c-adapter/i2c-0/0-0018/mode"
#define CM_DEVICE_NAME "/dev/proximity"
#define LS_DEVICE_NAME "/dev"
#define LIS_DEVICE_NAME "/dev/lis331dlh"
I think porting Morrison maybe less suitable for ruth

Thanks phc, and yes I know its a long shot, I still haven't gotten to the lib files, let alone hardware. But morrison IS the closest port for us. All the other devices are to advanced for the device. Do a compare between the two, ram is almost identical, chips are close, gpu aswell. Only thing that isnt is screen size. Thanks for the lost, it will come in handy later.
DEV Device: MB511 (deodexed)
Current System: MT27i xICS
Long Live: V9 Ferrari Rom
code.google.com/p/motorola-flipout-files

Hi,
I used jordan-common and MagicDevTeam's MB508([h t t p s : / / github.com/MagicDevTeam) files,
and compiled eclair AOSP to check different files than create ruth device files.
My ROM VERSION:
RUTEM_U3_01.14.16_DEBLUR_SIGNED_USARUTH15ND0RTINT056.0R_PDS000_USARUTHEHKTWEMARA_P011_A010_HWp3_1FF.sbf
My ruth configure files: ruthconfigureforcm7.zip(h t t p s : / / docs.google.com/file/d/0BxgqJrVwRKJqQUlWTWI3SURGU1U/edit)
https://github.com/phchshow/android_device_motorola_ruth
My unstable update file:v0.1.5.zip(h t t p s : / / docs.google.com/file/d/0BxgqJrVwRKJqaXNzRVJDSU95Slk/edit)
V0.5.0.zip
can work:
battd[2013/03/14]
bluetooth
half work:
audio->media codec can't use.
[2013/03/19]solved some media codec running problem, but video recorder codec still has problem (even use low quality).
[2013/03/23]only mp3 and jpg codec is ok, orthers codec has problem, unknow how to solved...
sensors.
fmradio->FMRadioService.apk can't use, but can purchase "Spirit FM Radio Unlocked" to use.[2013/03/15]
camera->[2013/03/18]replace to use MB508's libcamera.so and libcameraservice.so. can take a picture, but media codec has some problem, so can't photograph.
wifi->[2013/03/23]dhcp has problem, but use command to execute is ok.
use mb508's bootmenu/2nd-init/init, solve setprop question, now wifi is OK.
but no softap beacuse can't compile tiap_drv.ko with 2.6.29 kernel.
ril->[2013/03/25]can call, but no sound, seems like audio codec problem.
not work:
battd->log say INIT BATTD SOCKET SERVER: failed. unknow how to solve. update[2013/03/14]:chmod cpcap permission
camera->used mb508's camera library, log say "mapped at 0x4103c000, not at 0xa7900000" can not load library
used ruth camera library, log say CAMERA HAL not support. unknow how to solve.
radio. unknow how to solve.
wifi->when process step 2, /system/bin/wlan_loader -f /system/etc/wifi/fw_wlan1271.bin -i /system/etc/wifi/tiwlan.ini -e /pds/wifi/nvs_map.bin
failed. [2013/03/16]get new question Failed to start supplicant daemon.unknow to solve.
[2013/03/23]gps->Failed to enable location provider
forget test:
fmradio, gps

phchshow said:
Hi,
I used jordan-common and MagicDevTeam's MB508([h t t p s : / / github.com/MagicDevTeam) files,
and compiled eclair AOSP to check different files than create ruth device files.
My ROM VERSION:
RUTEM_U3_01.14.16_DEBLUR_SIGNED_USARUTH15ND0RTINT056.0R_PDS000_USARUTHEHKTWEMARA_P011_A010_HWp3_1FF.sbf
My ruth configure files: ruthconfigureforcm7.zip(h t t p s : / / docs.google.com/file/d/0BxgqJrVwRKJqQUlWTWI3SURGU1U/edit)
My unstable update file:v0.1.5.zip(h t t p s : / / docs.google.com/file/d/0BxgqJrVwRKJqaXNzRVJDSU95Slk/edit)
can work:bluetooth
halt work:
audio->media codes can't use.
sensors.
not work:
battd->log say INIT BATTD SOCKET SERVER: failed. unknow how to solve.
camera->used mb508's camera library, log say "mapped at 0x4103c000, not at 0xa7900000" can not load library
used ruth camera library, log say CAMERA HAL not support. unknow how to solve.
radio. unknow how to solve.
wifi->when process step 2, /system/bin/wlan_loader -f /system/etc/wifi/fw_wlan1271.bin -i /system/etc/wifi/tiwlan.ini -e /pds/wifi/nvs_map.bin
failed. unknow to solve.
forget test:
fmradio, gps
Click to expand...
Click to collapse
How are you flashing the update.zip files, my phone doesnt seem to respond to any of the changes.

hsr0 said:
How are you flashing the update.zip files, my phone doesnt seem to respond to any of the changes.
Click to expand...
Click to collapse
you can use charm Big Bootstrapped Recovery Update to update.
or use bootmenu to update.
update:
if you want use bootmenu,
you can unzip my update zip (v0.1.5.zip).
WARNING: if step fails, may be need reinstall the system. BE CAREFUL.
1. remount system (root)
mount -o remount,rw / /system
2. push bootmenu files
adb push v0.1.5/system/bin/bootmenu /system/bin/
adb push v0.1.5/system/bootmenu /system/bootmenu
3. chmod files permisson (root)
chmod 0755 /system/bin/bootmenu
chmod 0755 /system/bootmenu/binary/*
chmod 0755 /system/bootmenu/script/*
chmod 0755 /system/bootmenu/recovery/sbin/*
4. change mot_boot_mode(original motorola file) (root)
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
5. edit mot_boot_mode (root) update(2013/02/08)
/system/bootmenu/binary/busybox vi /system/bin/mot_boot_mode
#!/system/bin/sh
export PATH=/system/bin:$PATH
/system/bin/bootmenu
mot_boot_mode.bin
6. chmod mot_boot_mode permission (root)
chmod 0755 /system/bin/mot_boot_mode
7. reboot and click click click(loop) "vol down" key until show bootmenu screen

Can you post just the bootmenu files?
I have already tried your steps twice but soft bricked the phone.

hsr0 said:
Can you post just the bootmenu files?
I have already tried your steps twice but soft bricked the phone.
Click to expand...
Click to collapse
OK. I re-installed system. And write script name mkbootmenu.sh
unzip bootmenuDIR.zip
adb push bootmenuDIR/bootmenu /sdcard/bootmenu
adb push bootmenuDIR/mkbootmenu.sh /sdcard
in phone side:
$su
#sh /sdcard/mkbootmenu.sh
#reboot
when MOTO LOGO click click click (loop) "VOL - " (VOL DOWN) until show bootmenu screen
NOTICE: only new system or never changed mot_boot_mode can run this script .

thank you very much, it worked!
However I still do not know why it did not run when I executed it although I did a fresh install with RSD lite.
Maybe because I used windows to create mot_boot_mode file, maybe some character issues occured.
but once again thank you!

Will check it in the morning, so far i've modded most of the make files for CM9 and my only worry is the framework.apk but so far so good :thumbup:
Almost forgot! The 2nd init and a modified boot kernel will be the biggest problems.
DEV Device: MB511 (deodexed)
Current System: MT27i xICS
Long Live: V9 Ferrari Rom
code.google.com/p/motorola-flipout-files
https://github.com/plageran/ruth

Good job, man
My Flipout is waiting for a stable CM

ruth device cpu and gpu
As far as I know, flipout and charm have OMAP 3410 CPU inside, this CPU DOESN'T include GPU. Others like OMAP 3430 in Milestone 1 does include Imagination PowerVR SGX535 GPU.

Please check this location on your device with a root explorer app:
/system/lib/egl/
and in there you will find your gpu drivers, also most phones do have gpu's although it only helps the device a little bit.
I know my device has atleast 3 .so files in there and I think thats android drivers. I must just figure out if it should be recompiled for newer versions of android.
xinbada007 said:
As far as I know, flipout and charm have OMAP 3410 CPU inside, this CPU DOESN'T include GPU. Others like OMAP 3430 in Milestone 1 does include Imagination PowerVR SGX535 GPU.
Click to expand...
Click to collapse

Hijack
How did you manage to get the hijack working? I've been struggling my butt off to get the 2nd-init working:highfive:
phchshow said:
you can use charm Big Bootstrapped Recovery Update to update.
or use bootmenu to update.
update:
if you want use bootmenu,
you can unzip my update zip (v0.1.5.zip).
WARNING: if step fails, may be need reinstall the system. BE CAREFUL.
1. remount system (root)
mount -o remount,rw / /system
2. push bootmenu files
adb push v0.1.5/system/bin/bootmenu /system/bin/
adb push v0.1.5/system/bootmenu /system/bootmenu
3. chmod files permisson (root)
chmod 0755 /system/bin/bootmenu
chmod 0755 /system/bootmenu/binary/*
chmod 0755 /system/bootmenu/script/*
chmod 0755 /system/bootmenu/recovery/sbin/*
4. change mot_boot_mode(original motorola file) (root)
mv /system/bin/mot_boot_mode /system/bin/mot_boot_mode.bin
"5. edit mot_boot_mode (root)
vi /system/bin/mot_boot_mode "
#!/system/bin/sh
export PATH=/system/bin:$PATH
/system/bin/bootmenu
mot_boot_mode.bin
6. chmod mot_boot_mode permission (root)
chmod 0755 /system/bin/mot_boot_mode
7. reboot and click click click(loop) "vol down" key until show bootmenu screen
Click to expand...
Click to collapse

plageran said:
How did you manage to get the hijack working? I've been struggling my butt off to get the 2nd-init working:highfive:
Click to expand...
Click to collapse
He basically rewrote the boot script, so while booting up, it opens the bootmenu script and only then does it do a regular boot..
The normal 2nd init installer don't invoke the boot script in the same way I guess and hence it doesn't work.
Well now since bootmenu works, its like a torchlight in an otherwise dark tunnel.
Another point I want to make is that the flipout cm7 update given is in a bootloop. probably I need to change the files for basil (charm).

I think bootloop is audio device (libaudio.so) error. Maybe like when I use MB508's libcamera.so the message log show "mapped at .... " can't load library.
So should be use charm's libaudio.so to recompile CM7 sources. But maybe make some error, like media codec can't use.
hsr0 said:
He basically rewrote the boot script, so while booting up, it opens the bootmenu script and only then does it do a regular boot..
The normal 2nd init installer don't invoke the boot script in the same way I guess and hence it doesn't work.
Well now since bootmenu works, its like a torchlight in an otherwise dark tunnel.
Another point I want to make is that the flipout cm7 update given is in a bootloop. probably I need to change the files for basil (charm).
Click to expand...
Click to collapse
---------- Post added at 10:55 PM ---------- Previous post was at 10:34 PM ----------
The 5 step should be
"/system/bootmenu/binary/busybox vi /system/bin/mot_boot_mode", I forgot no install busybox no vi.
Defy use logwrapper to hijack, but flipout can't.
I think flipout processed init have not execute logwrapper, let we can't hijack logwrapper.
But mot_boot_mode executed.
So I rename mot_boot_mode to mot_boot_mode.bin and write new script name mot_boot_mode. Make bootmenu can execute.
And modify init.mapphone30_umts.rc
"exec /system/bin/mot_boot_mode" to "exec /system/bin/mot_boot_mode.bin", make 2nd-init can success execute init files.
In My uploaded bootmenuDIR.zip, the 2nd-init directory is modify for eclair to use.
You can modify eclair init files to test 2ndinit.
plageran said:
How did you manage to get the hijack working? I've been struggling my butt off to get the 2nd-init working:highfive:
Click to expand...
Click to collapse

What I've learned so far is that most motorola's have the hijacked kernel from the original device, I'm not sure up to what level of Android os this works but if you dig deep enough. Its all almost the same to stock.
I hope you don't mind me using your scripts for my rom, this changed things big time.
Now to get my build machine up and running and to finish my LIB list for CM
edit: has anyone figured out the fingerprint system yet? I haven't found anything about it yet, whether it's generated or copied over.
phchshow said:
I think bootloop is audio device (libaudio.so) error. Maybe like when I use MB508's libcamera.so the message log show "mapped at .... " can't load library.
So should be use charm's libaudio.so to recompile CM7 sources. But maybe make some error, like media codec can't use.
---------- Post added at 10:55 PM ---------- Previous post was at 10:34 PM ----------
The 5 step should be
"/system/bootmenu/binary/busybox vi /system/bin/mot_boot_mode", I forgot no install busybox no vi.
Defy use logwrapper to hijack, but flipout can't.
I think flipout processed init have not execute logwrapper, let we can't hijack logwrapper.
But mot_boot_mode executed.
So I rename mot_boot_mode to mot_boot_mode.bin and write new script name mot_boot_mode. Make bootmenu can execute.
And modify init.mapphone30_umts.rc
"exec /system/bin/mot_boot_mode" to "exec /system/bin/mot_boot_mode.bin", make 2nd-init can success execute init files.
In My uploaded bootmenuDIR.zip, the 2nd-init directory is modify for eclair to use.
You can modify eclair init files to test 2ndinit.
Click to expand...
Click to collapse

hey dude, r you guys still working on flip/charm? any progress to share?

xinbada007 said:
hey dude, r you guys still working on flip/charm? any progress to share?
Click to expand...
Click to collapse
keep an eye on our github pages, i can only update monthly due to cost's. Still need to get and build my build machine lol!