Related
Hi there,
I really need help!
I wanted to flash my phone with a nbh file, but I could not enter my bootloader.
I had installed HSPL3.
Now someone told me to use Flashaholic ROM update utility.
I did this, and a black screen with a % indicator appeared, not too long, it restarted, and went into a white screen with htc in the middle.
Restarting with volume down button pushed doesnt bring me into bootloader.
What can I do now?
I really need help!
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
anrabi4 said:
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
Click to expand...
Click to collapse
I installed HSPL3, and it said it was succesfull so...
After that I installed a custom rom with an utility that came with it (Dutty's)
So far I know, I cannot get any connection, but I try to download a stock rom (an utility exe) from HTC.com.
But I think this won't work right? because you have to sync.
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
anrabi4 said:
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
Click to expand...
Click to collapse
Does not work, still hangs in htc bootscreen.
What I have to do now? =(
I hope you have any more suggestions for me.
I will read it within 20 min, because I have to go soon for 20 min.
I really need my phone fixed =(
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Actually got it sorted now, the rom had the Flashaholic utility built in which i haven't used before.
As we speak the rom is now installing phew (stop sweating now)...
Thought i had bricked it...
MaxKaul said:
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Click to expand...
Click to collapse
It's not broken, it just worked before I did the task29.
The phone is empty, and has no bootloader, and no ROM.
wakers said:
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Click to expand...
Click to collapse
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
MaxKaul said:
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
Click to expand...
Click to collapse
Do I have to repeat it again? there is NO BOOTLOADER
joshoon said:
Do I have to repeat it again? there is NO BOOTLOADER
Click to expand...
Click to collapse
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
MaxKaul said:
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
Click to expand...
Click to collapse
Well im not able to.
I did a HSPL before then I putted a custom ROM Dutty's on the device.
After that I putten a Stock ROM on it again, and then I used Flashaholic, and after task29 it got stuck.
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
chris2busy said:
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Click to expand...
Click to collapse
I'm 100% sure it's not the volumebutton, and yes Im gonna play a bit dumb ofc, but I already have another story.
henk-jan said:
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
Click to expand...
Click to collapse
It's costs a lot for a trip to there.
Btw, I tried a full battery too, didn't work. (I have two)
webpatrick said:
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
Click to expand...
Click to collapse
I think it's bricked man, my bro is looking for the papers soon, and then im going to the KPN shop (the provider), because the phone has been ordered from there.
nrfitchett4 said:
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
Click to expand...
Click to collapse
All the connections look fine.
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
thi713 said:
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
Click to expand...
Click to collapse
First off your HD2 is not bricked. If it wax bricked it would not so much as turn on.To save your HD2 do one of these two things.
Download the official update from T-Mobile.com. Look behind your battery to find your IMEI number to enter. Next make sure your HD2 is good and charged I know this is hard as it will not boot but just let it charge for a good while as you do not want the battery to die during either method of flashing. Now while the phone is off hold the volume down button down and press the power button but keep holding the volume down button down. When the phone is in bootloader(multicolor screen) connect your phone to the computer via USB and wait for Serial in the white bar of the bootloader screen to change to USB and for your computer to show it recognizes your phone then right click on the update package and click run as administrator and run the update utility. This should flash the stock ROM but if you have MAGLDR you will loose it and if you have HSPL you might lose it.
Now the secound option you have is to right click on the update package and click on view or explore wich ever one you see and find the RUU_signed.nbh file and rename it to leoimg.nbh or LEOIMG.nbh as it is not case sensitive. Then take a 500MB to 4GB SD card that is formated with Fat 32 and place it into a USB SD card reader and plug it into a USB port on your computer. If you are not sure about the format. Go to "My Computer" and find the card reader, it will be a removable drive or a mass storage device (make sure to make a back up copy of the intior contents of the SD card first as it will wipe the card clean)and right click on it and click format and then Fat 32. Copy the leoimg.nbh file to the root of the SD card. After coping it to the SD card place the card in your phone and put it into bootloader the same as mentioned above but keep the volume down button held down until you see searching on the phone screen and then let the volume down button go. You will have to press the power button to comfirm it. This should flash your phone to complete stock as it will remove MAGLDR, CWM, and HSPL if you have it on your phone.
There is other options to but I highly suggest going back to stock and then starting back over again as to me it just simplifies things some. Also seeing as you have a T-Mobile HD2 do not flash a radio that looks like any of these 2.04.50.xx, 2.05.50.xx, or any radio like this 2.xx.51.xx as any of these radios will brick a T-Mobile HD2.
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
Yes you can reflash a Andriod ROM if you go back to stock but you would have to flash HSPL 2.08 again, flash MAGLDR 1.13 again, and CWM if you want to use it.
If you just want to flash another Andriod ROM just turn your HD2 off and then turn it back on button keep the power button down until the main menu of MAGLDR comes up (that is if you already have MAGLDR on your HD2) and then follow the instructions from the Andriod ROM on how to flash it using MAGLDR or CWM if you have it.
If you do not have HSPL and MAGLDR on your HD2 uou will have to flash both to hour HD2 befor you can flash a Andriod ROM. To flash these do this but your HD2 into bootloader (muticolor screen) and connect it to your computer via USB cable and wait to see USB in the white bar of the bootloader screen and that your computer recognizes your HD2 then flash wichever one you are wanting to flash. You will have to do this for every individual thing you want to flash. You also need to flash HSPL 2.08 first then MAGLDR 1.13 and then CWM if you want it.
thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=653614
read this post it will help you to install android dont end up bricking your phone
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
thi713 said:
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
Click to expand...
Click to collapse
No you have to have MAGLDR to install Android. Try installing Clock Work Mod (CWM) and use it to install your Andriod ROM. Just do a search for Clock Work Mod for HTC HD2. Then read and follow the instructions in the ROM thread to use CWM to flash it.
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
thi713 said:
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
Click to expand...
Click to collapse
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
T-Macgnolia said:
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
Click to expand...
Click to collapse
i tried that, and it seem to work, but it still often freezes on me during usage. For example, when i am on the android market, it tends to freeze up. is there any way i can fix this? and can you recommend me an android build that doesn't have this problem?
thi713 said:
i tried that, and it seem to work, but it still often freezes on me during usage.
Click to expand...
Click to collapse
Run a task 29 on your HD2 then reclash MAGLDR and see if this helps it should, unless you have some bad boot sectors.
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
thi713 said:
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
Click to expand...
Click to collapse
Well you can not fix bad boot sectors persay witbout replacing the NAND memory chip which acrually requires the replacment of the intior mainboard of your HD2. Because you can not just replce the chip cause of the wah the mainboard is made. Wht you can do is use a JTAG device and some special software to go in and mark those sectors as bad so the phone will no longer try to use those sectors.
My phone has been running an Android NAND for a couple of months, and the other day it just froze and then on rebooting i get a plain white screen.
I can get to the bootloader and so far nothing flashes to it
HSPL - Critical Error
SD-CARD flash - red numbers or just continual loading
USB flash - sits at 0% then gets error
so what killed my phone?
and is there ANY way i can get it working again, if not...i will throw it in the bin or perhaps smash it up with a hammer and post a youtube video here...im that annoyed! I wouldnt mind if i continually flashed roms, but i didnt...flashed on Android NAND and now its dead.
Find yourself a standard Winmobile rom and radio for the HD2 (if yours is a TMOUS device make sure you choose the correct radio and rom type for this device) and flash them to your device. With a bit of luck your device should then boot up.
If you then wish to go down the Android route again then read and follow all the instructions on here to do so. Don't forget to make sure your battery is fully charged before you attempt the reflash.
Good luck, hope it goes well.
WB
hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.
htcjrs said:
hi,
the battery is fully charged, but this is the problem i have..i cannot flash anything to it via sdcard or usb both give errors.
Click to expand...
Click to collapse
Do you still have the Andriod ROM on your HD2? If so boot into MAGLDR by turning the HD2 off and then pressing andbolding down the power button. Then use the volume up and down keys to scoll through the menu and find recovery and press the send button to select.
If you nolonger have the Andriod ROM then I suggest running a Task 29 on your HD2 then try to flash the official ROM to your HD2. If you are still having trouble getting it to flash do not get discuraged just keep tring to get it to flash, heck trythe USB method for awhile then try the SD card method for awhile. For some unknown reason to me a lot of people here on XDA have been having trouble getting their HD2 to flash a ROM. But all of them just kept trying and eventually got it to flash a ROM. Best of luck.
tried and tried and tried again, anyone wants this brick for free, i will post.
htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
Did you run a Task 29 on your HD2 as I mentioned in my previous post? I beleive this will help you out. Also if you still have MAGLDR on your HD2 you can try to reflash the Andriod ROM. If you no longer have MAGLDR on your HD2 then you can reflash HSPL 2.08 and reflash MAGLDR by usinig the bootloader and the try flashing the Adriod ROM. Just make sure the white bar of the bootloader screen says USB and not Serial before you try to flash anything.
T-Mac, I have this problem. It's not something as simple as with MAGLDR or CWM. You can't even get a bootscreen let alone flash anything from HSPL (everything sticks at %0) lol.
Dude, your best bet is to try go flash a custom WinMo ROM. I used one of Artemis' ROM's. It had a .nbh file so I renamed it to LEOIMG.nbh and put on my SD card (512-4GB max) and then boot to HSPL and it'll allow you to flash the ROM.
It'll flash correctly but once it reboots it'll go back to the white screen. After that, it'll be able to charge when off so let it charge overnight while off, then in the morning try unplug the USB from the phone then pull battery and put it back in then try boot. It worked like 3 times for me so you might aswell try it.
I personally think it's a problem with MAGLDR and maybe it becomes corrupt or something.
hi
im gonna try this now, but i have a small problem...it did flash HSPL and now it is on 2.08.000 and it wont flash back
its one nightmare after another.
made a little progress, when trying to flash stock rom from sd it just sits on loading.... no error but doesnt do anything else.
Try this turn your HD2 off and remove the battery for a couple of minutes and then put the battery back in. I do not know if the HD2 has a reset like this or not. But a lot of electronicsreset certain things when all power is disconnected. This may not help but what can it hurt. Best of luck.
htcjrs said:
tried and tried and tried again, anyone wants this brick for free, i will post.
Click to expand...
Click to collapse
I'll take it. In this day of T-Mo being sold off, I need a challenge to distract me and keep me happy
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
Okay i have a question, my friend brought me an hd2 phone similar to the one i have. Thing is that he tried to install android on it and im not sure what he did wrong. I can reach MAGLDR when i turn on the phone but it wont boot on android and or reach the bootloader no matter what i do. Question is, is there anyway to flash a bootloader via the usb flasher on MAGLDR or is the phone simply bricked because of that?? By the way yes i have taken the battery out tons of times and tried to turn on with button down and power and even tried the reset button on the back of the phone without luck.
enelyam said:
Okay i have a question, my friend brought me an hd2 phone similar to the one i have. Thing is that he tried to install android on it and im not sure what he did wrong. I can reach MAGLDR when i turn on the phone but it wont boot on android and or reach the bootloader no matter what i do. Question is, is there anyway to flash a bootloader via the usb flasher on MAGLDR or is the phone simply bricked because of that?? By the way yes i have taken the battery out tons of times and tried to turn on with button down and power and even tried the reset button on the back of the phone without luck.
Click to expand...
Click to collapse
Try only holding the volume down and plugging the phone into a computer. If that doesn't work, you can install different android ROM's through recovery and some old ones even flash through usb flasher. It was probably a bad install and at least it will boot into android when you clean flash a different ROM.
Hey thanks for the fast response. Ok the thing is, that he installed MAGLDR 1.11. And i cant see any option to get into AD recovery. But to be honest ive never used 1.11 before so i dont know if its possible to use cwm with it. Anyways, I tried with 2 different roms via usb flasher but it wont load android. In fact, when i turn it on and it boots everything seems to be fine. After the GO GO GO it will just show the DFT logo and it stays like that. I tried the DLdesire rom earlier and now it wont show the DFT logo but the DLdesire one. But it just stays there and thats it. Like i said, I cant reach the bootloader and im afraid i wont be able to update MAGLDR to 1.13.
That takes me to antoher question. Will MAGLDR work even when maybe he didnt install HSPL? Because the only thing i can think of is that maybe he didnt. Oh well, who knows what was done to that phone . Anyways if someone have gone thru something similar please i need advice.
Hspl and radio must be already correct since magldr starts. The phone would go immediately to the splashscreen and hang there if either were wrong. You wouldn't see magldr at all.
" ad recovery" is only an option in magldr 1.13,, for 1.11 you would find the SD card version of cwm and start it by choosing "ad SD" in magldr.
As for "can't enter bootloader" ( I assume you're doing it right... voldown held, power tap and release) the only time I've seen that fixed was recently when a Guy disconnected the hard key ribbon cable, but that could be a fluke/totally different problem, so I wouldn't recommend it.
Ok so if im getting into MAGLDR it means that even though i cant reach the bootloader i can still flash a rom and it will work. So far i have tried a couple roms via usb flasher and none of them work.
Also, im looking up in google for the SD version of CWM for about an hour now and all i can find is the magldr 1.13 tutorials and stuff like that. Is there a special version of CWM for SD and if so, can someone provide a link on that?
Look for the thread titled something like "clockwork recovery yes/no " (look for the yes/no part especially) there are three versions in there, nand flash, update.zip and SD versions.
As for using USB flasher to flash roms, as far as I know only the first, proof of concept rom uses USB flasher mode,, all the recent roms are flashed from SD card through cwm.
Allright thanks a lot m8! you have been very helpful... happy new year by the way!
Okay, i still have issues with the HD2. I know im doing everything the way its supposed to be, and still when i hit AD sd the phone will do everything fine and even the GO GO GO message but still no recovery at all. If i try to install a sd type rom it will boot up to the Roms splash screen but that is it, it wont go further. What i dont understand is that MAGLDR will work just fine, adn when i flash anything the phone will take it with no errors. But then it wont load the recovery and or specific rom... Any ideas what might be???? Just remember, im not able to boot from the bootloader so im trapped inside MAGLDR.