Hi all
my xperia x10i won't turn on
Firstlly sorry for my English.
My xperia cannot open.
When i pushed power button to open xperia, it shows Sony Ericsson write and logo but after restart auto , likely on-off-on-off-on-off.
What did I do before breakdown ?
i upgraded from 2.1 to 2.2.1 . it runned normally but can't see simcard so i wanted to downgrade 2.1 version to use my phone normally. I downgraded the version with Sony Ericsson Pc Companion last sony ericsson version.
When the downgrade is done by SE pc Companion i tried to open my Xperia and i see breakdown.
so i cannot open phone and i cannot start sony ericsson pc companion and cannot start unknown sources and usb debugging mode.
I need your help. I don't know how to fix it i need my xperia to use
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
1. Take your battery out.
2. Hold the back button. Make SEUS running and ready.
3. Plug it into the computer.
4. Put your bateery back in.
Follow the instructions. Hopefully it would work and good luck
If it worked dont forget to hit thanks button.
Sent from my X10i using XDA Premium App
thanks thanks thanks thankkksssss alot i try it now
Thank you Jingle Jo its done thank you so much
Happy to help.
I had the same problem before and this place helped me too.
Great community, hope you stay tuned in
It's all about helping one another, hi by the way.
Sent from my X10 TripNMiUI using XDA App
My Xperia X10i went crazy..
Giving the same error. I tried to root it, it was Orange UK . Now when I open it up there is SE logo and right after NTT Docomo logo and nothing happens then.. just that lighty black screen which looks like its trying to open something but cant.
I did what you said but nothing happens.. it says the phone is up to date..
Is there any option to re formate it ?
Need help please
Thanks
Related
hye guys,
im totally new here and i tried rooting my x10
with the xda-dev section
but things turned out to be ugly as i cant see any display after step1 completed,
pls im very nervous and thinking i might have broken it down ,
any help wud be really appreciated.
thnx.
the version i had was 2.1
If your phone wont turn on or you got no display try reflashing with seus for now. That should fix you up for now.
After that i can help you out with flash tool.
Sent from my X10a using XDA App
brother,
it will be awkward to ask too much but i really dont get u.
im fresher here,
so wud u go easy on me,/?pls
Ok, first if you havent already, and I can almost guess you haven't you need to download PC Companion and Sony Ericsson Update Service (SEUS) to your computer.
Once you do that, turn your phone off, and run SEUS. Follow the steps and select your phone when given the option. After you select your phone, it will tell you to plug your phone into your computer in flash mode, basically just hold the "back" button on your phone until SEUS tells you to release it. If you have a new upgrade available then feel free to do so,..if you already have the latest software then in the bottom right corner you will see an option that says "install" click on it and proceed. It will reflash your phone for you and should be ready to go once done.
Good luck
i did just as you said , but i there is no "install" option at the last step
pls help
Not rooted, no ROMs, just won't boot past SE logo.
Can't get into ADB as before this happened, the development box wasn't ticked.
Could do with someone telling me how to get into Fastboot (and if it's possible).
Much love ~
just relax mate, reflash using SEUS (Sony ericson update service) download it on sony ericsson.. just follow the instuction in it and it will be alright.
Hi there,
The SEUS thing is rubbish. I hold the back button like it asks (when plugging in USB) and doesn't allow me to progess. The other application (PCC) is not what I need, but SEUS is in the right direction.
Got SEUS working, installed the original update.
Then installed xrecovery and rooted and threw a 2.3 ROM on. Looking good!
Case closed!
Hello Guys
I have a UK Sony Xperia Play which was rooted- using the rooted 2.3.3 kernel Originally and was updated by sony from 2.3.2 to 2.3.3 which worked ok before I rooted the device.
I then decided to use another members rooted firmware which worked - Please see here :- http://forum.xda-developers.com/showthread.php?t=1145729
I wanted to reflash to with 2.3.2 which worked then I did a sony update again over wifi and after that I could not boot the phone at all it just vibrates nothing happens - no boot logo- I have reset the phone by taking the battery out and it is fully charged and it does work in flash mode but when I try to reflash the rom again it using flash-tool and stock firmware the software says it has been done but does not boot. Any thoughts on why this is.The Bootloader has been unlocked previous to root
Thanks
Mark
You've unlocked your bootloader AND updated Over The Air?
Yea he has an unlocked bootloader... There are countless threads warning you not to update over wifi or 3g if you unlocked bootloader... =( try the development forum to see if you can get it unbricked
Sent from my R800i using XDA App
Hi there yes I have unlocked the bootloader the 1st time before I started do u think I should unlock the bootloader again well go through the motions but I cant fastboot blue its stuck in firmware updater green all the time I think its bricked thanks fir your comments I have tried most solutions in the forum without success
Sent from my GT-I9100 using XDA App
Hey guys just got the solution from the developers forum bin4ry freexperia unbrick solution I am happy now
Regards
Mark
Sent from my GT-I9100 using XDA App
Be careful what ever you do because you can destroy your radio if you use the wrong fix.
I have not had your problem but I believe there is a fix binary made as long as you have done nothing to the phone since you bricked it
Edit: /\ lol a little slow I guess /\
Sent from my R800i using XDA App
Glad it worked out for you, sorry I couldn't copy and paste the link for you to unbricked you phone since I'm using the xda app on my play
Sent from my XPlay using XDA App.
Hi
I had the same problem with my xperia play (R8000i), after upload over wifi, my xperia play doesn´t work. i can´t do the fastboot neather the battery charge.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
Someone here already have the solution for that?
Thanks
I have the exact same issue, what's the fix?
EDIT: OK, rather than start a brand new thread I thought I'd just reply here.
Basically, I unlocked and bootloader of my phone and rooted it ages ago, and totally forgot the dire warnings about OTA updates. I spotted someone on here mention that they'd installed an OTA update on a rooted phone and decided to do it, as I've noticed that my Play is really buggy of late.
Of course, this has bricked my phone. When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I've tried plugging the phone into the PC in recovery mode (holding down back, green light comes on) but my PC says I need an S1boot Download driver (which I swear to god I already have, I think I needed it to unlock the bootloader in the first place!). I've followed all instructions, downloaded the drivers and pointed the installer in the right location but I keep getting a message that says the hardware cannot be installed.
I'm running Windows XP, by the way. Can anyone help a foolish soul?
S1Boot Download issue solved: http://forum.xda-developers.com/showthread.php?p=17497338#post17497338
OK already have this driver installed and can use the FlashTool normally, but the Xperia play does not start, and I can not put them in the way fastboot mode.
When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I have used the PC Companion and Update Service did not work
Does anyone have a solution?
You need to wait for the prompt to connect your phone in Flashtool. When prompted, you have to hold down the 'back' button when you plug in the USB cable. The power light should go green to indicate the phone is in fastboot mode.
Had already done this process.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
You need to flash the special unbrick tft, it's on the forums somewhere
Fastboot = BLUE light (search button+usb). Used to flash/boot with fastboot commands from a cmd window on a pc/laptop and such.
Flash mode = GREEN light (back button+usb). Used when flashing with flashtool.
Regards Dousan...
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Mr_Taser said:
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Click to expand...
Click to collapse
I think he's talking about this one by Bin4ry:
http://forum.xda-developers.com/showthread.php?t=1126354
Regards Dousan...
Thanks to everyone who helped.
The phone back to start normally.
Thank very much
Apologize that I am still a newbie, I don't know much about technical terms.
Yesterday, I flash my ARC via x10 Flasher to get the latest update with LT15i_4.0.A.2.368_Generic Global.tft. I finally got my ARC fully updated.
Today, I was mistakenly update my Xperia Play using LT15i_4.0.A.2.368_Generic Global.tft via X10Flasher also. However, I didn't notice or have known before that they're using separated FW and I accidentally use Arc's FW to Play...
The result that my Play got bricked??? The screen got only light and no SE logo appeared. The power button got red light on it.
I tried both SEUS and PC Companion to flash back to Original FW but It didn't help.
When I connected to PC Companion, the software informed that I connected LT15i, infact it must be R800i -.-*
Any method to recover my Xplay to Original FW?
R800i Asia I think
Please help I felt that I was so stupid that I did such a stupid thing...
T3T
I had nearly the same Problem. Maybe this might help, it helped for me.
1. FULLY CHARGE YOUR PHONE!!! I was told to remove battery for 30minutes, then put it back in but without sim card and withough SD Card. Then plug the charger back and charge for at least 5 hours!!!
2. Connect your Phone in Fastboot mode (blue light) by pressing the searchbutton before connecting.
3. Update your drivers with the provided Fastboot drivers of this forum
4. Do the steps of relocking your play through Fastboot
5. Try SE Update again with the Software
Ill keep my fingers crossed for you, I know how you re feeling...
Guys, my wife's X8 just got busted..
touchscreen is gone.. display is still there but not responding to touch anymore.
(I did everything I can.. so confirmed it's a hardware issue).
I've flashed this to a custom ROM.
How can I flash this back to stock 1.6? Along with the SE GUI?
I ran search on forum and found I need to download SE PC Companion, or SEUS.. will that do the trick? I need confirmation because my internet connection at home is quite slow, and I need to send this back for warranty ASAP.
Thanks all.
Yeah, download SEUS, select repair and it will install stock 2.1
Sent from my X8 using XDA App
Thanks Godra..
However I found this from SE Website..
How to use
1. On the computer: Start PC Companion.
2. Connect the USB cable to your computer and then to the phone..
3. On the phone: Select the "Connect your phone" option.
4. Wait for the phone to connect.
5. On the computer: From the Dashboard, select the applications to start different services and get information.
----
Issue is the touchscreen is busted, so I can't select the "Connect your phone" option.
Any other flashing method to get back to stock without them noticing that I've modded?
use the Flashtool.
You´ll have the choice beetween different 1.6 and 2.1 ROMs, and you just need to putn your phone into flashmode for this, so you don´t have to touch the screen.
You can try x10 flashtool. I would post you a link to the thread but im currently on my x8 so you ll have to use search...
Sent from my X8 using XDA App
Thanks codfreak and Godra.. I'll try first and see how it goes.
Appreciate your help. God bless!
Dear all, I found out that I've made a nandroid backup of the original stock ROM and saved it on my computer hard disk (see.. always do a nandroid backup!)
Anyway, I have xRecovery installed on the phone.. how do I uninstall it?
Flash with SEUS. You need first to turn OFF your phone (better to pull out battery). Run SEUS, choose your phone, next.
When SEUS asks, put your battery in while pressing back button. It will restore original Eclair.
unfortunately after using Sony Ericsson PC Companion 2.0, the app is unable to detect my phone.
Upon connect via USB, it asked me to do something to the phone.. which require touchscreen interaction before it could identify..
neato4u said:
unfortunately after using Sony Ericsson PC Companion 2.0, the app is unable to detect my phone.
Upon connect via USB, it asked me to do something to the phone.. which require touchscreen interaction before it could identify..
Click to expand...
Click to collapse
You are not trying SEUS?
I think there is no need to touch anything on phone because SEUS is needed your phone to turn off.
wc_how, yeah I didn't use SEUS.. hehe..
Oh well, I sent the phone after nandroid restore.. stock ROM.. as it is..
At the service center, one lady tested my phone.. checked the hardwares.. all appears ok, no sign of drop.. while I explained about the touchscreen issue..
All of a sudden she enters xRecovery before I knew it.. and she was greeted by this smirking Android face...
She paused, take a look at me... I smiled...
She turned the phone off and said "Ok, we're going to replace the touchscreen for you, please sign here - here's your reference number, we will call you - or you can call us when the device is ready"
And I was off.. hehehe
Your lucky then, enjoy