--- If you have bricked your HTC Desire Z or G2. I have a method that is sure to work! In the past I bricked the same device and I have found a way around it. Follow these steps and post and thank if it has worked for you! ---
How To Unbrick A HTC Desire Z or G2!
Step 1: If your device is rooted and flashed with "ClockworkMod Recovery" and "S-Off"you want to start by holding down the Volume Down Button and holding the Power Button for about 7 seconds.
Step 2: You will suddenly be welcomed with the HBOOT Menu. Scroll down and select Recovery.
Step 3A: You will then be showed the "ClockworkMod Recovery" Menu. (Read the message below!)
Step 3B: First you will need to Factory Reset and Clear Cache Partition!
**If you have a backup or restore point continue to Step 4A if not you will need to install an alternate ROM and proceed to Step 5 or Factory Reset which will only reset for that ROM. For another possible solution a read end of post!**
Step 4A: Now from here you will of course scroll down to Backup and Restore, select restore and select your point of restore!
Step 5: Now if you have another ROM located on the SD Card of your phone you can scroll down to install zip from sdcard and find the zip file (gapps if required) and install all of the following and reboot!
Step 6: Enjoy your UnBricked device!
---Alternate Solutions----- Fix Permissions and reboot.
-- Factory Reset and Reboot
... lol I had to do this method long ago. Bad thing is I had to find out on my own but is good that you posted this. I think it will help out.
Sent from my HTC Desire Z using XDA Premium App
Expect alot from me from now on first time XDA member full time experienced disaster avoider!
How do you unbrick a device when it say
E: cant mount /cache/recovery/command
E: cant mount /cache/recovery/log
E: cant open/cache/recovery/log
E: cant open/cache/recovery/last_log
E: cant mount /cache/recovery/last_log
cant restore to earlier restore has errors
during wipes it always gives me the
E: cant mount /cache/recovery/log
E: cant open/cache/recovery/log
E: cant open/cache/recovery/last_log
E: cant mount /cache/recovery/last_log
errors
dragokld said:
How do you unbrick a device when it say
E: cant mount /cache/recovery/command
E: cant mount /cache/recovery/log
E: cant open/cache/recovery/log
E: cant open/cache/recovery/last_log
E: cant mount /cache/recovery/last_log
cant restore to earlier restore has errors
during wipes it always gives me the
E: cant mount /cache/recovery/log
E: cant open/cache/recovery/log
E: cant open/cache/recovery/last_log
E: cant mount /cache/recovery/last_log
errors
Click to expand...
Click to collapse
Am not really sure... I've never had this issue before. Well do you know how to use ADB? If you do can't you flash clockwork again maybe that could fix the problem. I really don't know how to use ADB since I used Unforgivens way of s-off.
Sent from my HTC Desire Z/G2 using XDA Premium App
I AM VS4 said:
Expect alot from me from now on first time XDA member full time experienced disaster avoider!
Click to expand...
Click to collapse
Lol yup. Anyways welcome to the group!
Sent from my HTC Desire Z using XDA Premium App
lainvalenajr said:
Am not really sure... I've never had this issue before. Well do you know how to use ADB? If you do can't you flash clockwork again maybe that could fix the problem. I really don't know how to use ADB since I used Unforgivens way of s-off.
Sent from my HTC Desire Z/G2 using XDA Premium App
Click to expand...
Click to collapse
yeah ive been getting help from someone from the cyanogenmod forums and we have tried many things flashing recoveries and all that but it keeps giving me errors.
I dont think that i can reflash clockworkmod because i dont have eng s-off just ship s-off
Thanks, very helpful!
If your phone is bricked then you won't be able to get into hboot at all. So it would be helpful if you would consider changing the title etc of your posting. This won't help a phone which really is bricked.
Sent from my HTC Vision using XDA Premium App
steviewevie said:
If your phone is bricked then you won't be able to get into hboot at all. So it would be helpful if you would consider changing the title etc of your posting. This won't help a phone which really is bricked.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
... Well its a simi-brick. I guess the titile should be changed but not saying that the thread isn't helpful
Sent from my HTC Desire Z/G2 Using XDA Premium App
This method has worked for me in the past and there is a possibility this can work! So "Steviewevie" I wouldn't post a method I haven't tested in the past! I have Unbricked 2 devices with this same method. There is ways around everything. So "dragokld" keep trying and try the method "lainvalenajr" has given. I will check for more methods and experimenting. Sorry for the inconvenience.
VS4 <3
I have tried this method, but I cannot reach the CWM menu, all I can do is try the standard HBoot recovery from PC10IMG.zip, but it dies at RADIO_V2 step after many Fail-PU on all other steps: what can I do?
My DZ was rooted, flashed with CWM and Virtuous ROM. I have a nandroid backup on the SD. It died today with "can't mount" error messages after a freeze and reboot.
Also tried Factory Reset from HBoot, but it hanged at the "androids on skate" screen forever..
These instructions are just "how to flash a ROM" or at best, what to do after a failed flash.
I don't want to sound like a jerk, I think it's great whenever someone takes the time to help others, but these instructions will not work for a bricked phone.
Allright, I'll keep following the other thread then.
http://forum.xda-developers.com/showthread.php?p=14121637#post14121637
~I think my device have a hard brick
SIGN-ON
normal HBOOT 0.82.0000
Rooted
Clockrecovery installed
radio: 26.02.01.15_m2
I can't pass the boot
I can't any radio
I can't downgrade radio version
I can't use misc.img
After I select recover the phone just froze at HTC white screen. Clockwork recovery was installed and flashed.
I think this is called "soft-bricked"
hard-bricked is when none of this stuff is possible and you have to send your phone and $40 to that famous dude here in the forum who un-bricks anything.
Hi, I have an unrooted Desire Z on Bell. I recently experienced a hard lock and upon battery pull, discovered that my phone would not boot up (frozen at the htc screen). I can hold volume - and the power button to get into the boot menu, but can't seem to perform a factory reset or enter recovery mode. Recovery brings me to the screen it should initially (with the green circle/arrow symbol) and then the screen goes blank and the phone vibrates a total of seven times before...nothing happens. Selecting factory reset just hangs up the Hboot menu.
All I can really do is go into Fastboot or IMAGE CRC, but don't see any options there. Any one have any ideas?
Before this, i also experience half brick. My DZ already s off. So i just flash the stock rom & gain the root again. Flash the custom rom & my DZ back to normal until now.
Sent from my HTC Vision using XDA App
I was using CM7 for about a month, without any reboots at all. Recently i got greedy and wanted to try out MIUI, so i downloaded the latest ROM and copied it onto the SD card and ofcourse flashed the system with it. After rebooting i only get to see the lockscreen and after that the phone just reboots. I have tried everything there is, but with no luck.
It seems i can not revert the phone back to stock reco, rom etc. either, because first i need a working system to do that.
Any ideas, people?
Thank You in advance,
a worried Android fan from Estonia.
Related
ok i have a mytouch 4g n i flashed the orange sense rom n everything worked fine for a few days but then my screen froze n then i started getting boot loops..
i went to cwm recovery (3.0.0.5) and i started getting errors:
E:cant mount ?cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
someone posted saying that PD15IMG worked n so i tried it and got it on my sdcard and everything worked ok but then i started getting fails
fail PU
fail PU
fail PU
fail PU
fail PU
fail PU
bypased
updating...
n then theres a red bar but then my screen gets stuck there
HELP PLS
rooted n S-off so i dont think i can ask tmobile for a new one?
Yes i used the gfree method since it wuz the only method that worked..
Sooo that means my phones "bricked" forever?
Sent from my T-Mobile myTouch 3G Slide using XDA App
saranhai said:
Yes i used the gfree method since it wuz the only method that worked..
Sooo that means my phones "bricked" forever?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Their are SEVERAL threads on this already. I do not know anyone who has recovered from it.
Is it possible to reroot with the gfree method?
Sent from my T-Mobile myTouch 3G Slide using XDA App
I have this exact same problem. I shut my phone down and now it won't even log into hboot or anything. Nothing will work on my phone at all it's just a brick.. Guess it's time to call T-Mobile and hopefully get it replaced :/
is it possible to use adb n try to get it working again?
saranhai said:
is it possible to use adb n try to get it working again?
Click to expand...
Click to collapse
You need to have the engineering bootloader on your device in order to flash partitions over USB. To check, turn on your phone by holding volume down and power until the white screen comes up. If you see this on the first two lines
Code:
GLACIER PVT ENG S-OFF
HBOOT-0.85.2007 (PD1510000)
then you have the engineering bootloader. We'll continue from there if you have it.
jdkoren said:
You need to have the engineering bootloader on your device in order to flash partitions over USB. To check, turn on your phone by holding volume down and power until the white screen comes up. If you see this on the first two lines
Code:
GLACIER PVT ENG S-OFF
HBOOT-0.85.2007 (PD1510000)
then you have the engineering bootloader. We'll continue from there if you have it.
Click to expand...
Click to collapse
What if I can't even boot into the bootloader? :/
zidane55387 said:
What if I can't even boot into the bootloader? :/
Click to expand...
Click to collapse
Holding Volume down then press power button does NOT bring you to H-Boot? If so you are truly hosed...
faux123 said:
Holding Volume down then press power button does NOT bring you to H-Boot? If so you are truly hosed...
Click to expand...
Click to collapse
Aye, thanks for the answer I was afraid to hear haha. Hopefully T-Mobile will send me a new phone :/
No I have .86.000
Sent from my T-Mobile myTouch 3G Slide using XDA App
saranhai said:
No I have .86.000
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
you need .85 to flash stuff via fastboot. might be time to drop a dime and call T-Mobile.
saranhai said:
ok i have a mytouch 4g n i flashed the orange sense rom n everything worked fine for a few days but then my screen froze n then i started getting boot loops..
i went to cwm recovery (3.0.0.5) and i started getting errors:
E:cant mount ?cache/recovery/command
E:cant mount /cache/recovery/log
E:cant open /cache/recovery/log
E:cant mount /cache/recovery/last_log
E:cant open /cache/recovery/last_log
someone posted saying that PD15IMG worked n so i tried it and got it on my sdcard and everything worked ok but then i started getting fails
fail PU
fail PU
fail PU
fail PU
fail PU
fail PU
bypased
updating...
n then theres a red bar but then my screen gets stuck there
HELP PLS
rooted n S-off so i dont think i can ask tmobile for a new one?
Click to expand...
Click to collapse
The pd15xxximg.zip only works with recovery 2.5.1.2, since you were on 3.0.0.5 when you forced it, you hosed the entire internal storage structure. Now the only hope you have is via fastboot but it requires eng boot loader...
The original error you got only required a quick wipe and re-installation... The pd15xx.zip while on 3.0.0.5 is the real killer...
Sent from my HTC Glacier using XDA App
faux123 said:
The original error you got only required a quick wipe and re-installation... The pd15xx.zip while on 3.0.0.5 is the real killer...
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Didn't know that. Since the 3.0.0.5 is Ext4 and the ROM is Ext3. It makes sense. Do you know if the .6 and the new 3.0.2 will flash the PD15IMG correctly?
neidlinger said:
Didn't know that. Since the 3.0.0.5 is Ext4 and the ROM is Ext3. It makes sense. Do you know if the .6 and the new 3.0.2 will flash the PD15IMG correctly?
Click to expand...
Click to collapse
even though both mentioned supports ext3, I don't know how compatible they are with the pd15xximg.zip...
Sent from my HTC Glacier using XDA App
faux123 said:
even though both mentioned supports ext3, I don't know how compatible they are with the pd15xximg.zip...
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i guess i'll revert back to 2.5 if i should have to flash the PD15IMg in the future.
Is there anyway to flash cwm 2. Something? Or how do I get eng hboot?
Sent from my T-Mobile myTouch 3G Slide using XDA App
saranhai said:
Is there anyway to flash cwm 2. Something? Or how do I get eng hboot?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Neither one is possible in the state you are in
[sent via Cyanogen powered Android]
neidlinger said:
Neither one is possible in the state you are in
[sent via Cyanogen powered Android]
Click to expand...
Click to collapse
so basically this means that my phone is bricked correct?
saranhai said:
so basically this means that my phone is bricked correct?
Click to expand...
Click to collapse
i would have to agree that your phone is bricked but hey, on the bright side you got a gangster paperweight!!!
sorry for your luck bro!!!
Question I bought a mytouch 4g and it was stuck on the boot screen and so I checked to see if it had recovery and I went into boot loader and it has s off and when I try to load recovery I get this message
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
If some one could point me in the right direction it would be greatly appreciated.
Sent from my G2 using XDA Premium App
sinfulgray said:
Question I bought a mytouch 4g and it was stuck on the boot screen and so I checked to see if it had recovery and I went into boot loader and it has s off and when I try to load recovery I get this message
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
If some one could point me in the right direction it would be greatly appreciated.
Sent from my G2 using XDA Premium App
Click to expand...
Click to collapse
It might have failed PU or bad chip from gfree.
sinfulgray said:
Question I bought a mytouch 4g and it was stuck on the boot screen and so I checked to see if it had recovery and I went into boot loader and it has s off and when I try to load recovery I get this message
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
If some one could point me in the right direction it would be greatly appreciated.
Sent from my G2 using XDA Premium App
Click to expand...
Click to collapse
Did you buy it that way?
Sent from my Panache powered mytouch4g from mobile XDA app
Yeah i bought it that way it was in mint ondition for $80 thought i might be able to fix it. Can i just restore factory rom through bootloader? Im still a newb at this.
The recovery i mentioned is Clockworkmod 3.0.2.4
sinfulgray said:
Yeah i bought it that way it was in mint ondition for $80 thought i might be able to fix it. Can i just restore factory rom through bootloader? Im still a newb at this.
Click to expand...
Click to collapse
I'd get your money back if you could. It sounds like this jerk knowingly sold you a bricked phone. When you get those cache errors in recovery, it's essentially bricked. Try searching for restoring by flashing PD15IMG.zip through the boatloader. It's basically unrooting and flashing the stock image, but it does not always work.
TeeJay3800 said:
I'd get your money back if you could. It sounds like this jerk knowingly sold you a bricked phone. When you get those cache errors in recovery, it's essentially bricked. Try searching for restoring by flashing PD15IMG.zip through the boatloader. It's basically unrooting and flashing the stock image, but it does not always work.
Click to expand...
Click to collapse
What tj said. One way you can try is flashing a clockworkmod 2.x.x recovery from fastboot and fixing the catches. However, if the recovery partition is too far gone you will truly brick the phone. If you can't get your money back try his way then try my way. If neither work you got jacked for $80 sorry bud.
Sent from my HTC Glacier using XDA Premium App
Well i tried to flash PD15IMG.zip and it came back with failed PU. Im going to try and flash a 2.x.x.x. recovery image see if that works.
sinfulgray said:
Well i tried to flash PD15IMG.zip and it came back with failed PU. Im going to try and flash a 2.x.x.x. recovery image see if that works.
Click to expand...
Click to collapse
Update your findings, I'd be interested to know if it worked
Well I tried to set up SDK to use ADB to push the CWM 2.x.x.x. img and its not working properly. It will not detect my device. Ill have to check when i have more time tonight. So far not so good.
"It will not detect my device."
Did you install the HTC driver?
Did you do an "adb devices" first? ( when i do it it says daemon not found starting daemon etc etc or something to that effect, then it shows the device ID -- so in other words, it may have to start some services on your pc first with the devices command before you launch in to pushing files onto an unidentified device -- this last part is just my observation, not gospel)
You can't use ADB for pushing the recovery, unless you have a rooted phone and it boots far enough to use ADB. Otherwise you need to use fastboot, and if you don't have the engineering bootloader - you won't be able to.
I think I just bricked my continuum and I don't know what to do!!! I press the power button and my phone doesn't turn on. It just hangs at samsung. And it won't let me get into CWM. HELLPPPPP!!!
ntien said:
I think I just bricked my continuum and I don't know what to do!!! I press the power button and my phone doesn't turn on. It just hangs at samsung. And it won't let me get into CWM. HELLPPPPP!!!
Click to expand...
Click to collapse
What were you attempting?
Sent from my SCH-I400 using XDA App
I'm having similiar troubles, if you can help me it would be greatly appreciated
here's a video i made of whats going on with the phone.
youtube. /watch?v=Iw4iAxuCAl0
i don't know how i messed it up, i was just doing stuff in CWM and when i tried rebooting my phone, it was just stuck at the samsung screen. it didn't actually show the boot animation, just the part that says samsung in white letters. when i try to apply sdcard:update.zip i get the following:
# MANUAL MODE #
update.zip gone
E:Can't mount /dev/block/vold/179:9
(No such file or directory)
E:Can't mount SDCARD:bplib_delta_for_test.bin
--Install from sdcard...
Finding update package...
E:Can't mount /dev/block/vold/179:9
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
update.zip gone
Download the hacked param.lfs for the fascinate, and flash it with heimdall... Had the same error, and that worked for me...
Sent from my SCH-I400 using XDA Premium App
im going to try it in a sec, but just two questions. one, isn't this just to change your boot logo? and do i need the continuum pit.pit file?
Yes, it does give the ability to change the boot logo... But when doing it, i noticed that after flashing, the stock recovery does this weird thing where it wipes everything, even when normally it won't... after that, it worked again...... Just know you will loose your data But whatev's
and no, not necessarily..
If that doesn't work, which is probably won't, then reflash the stock recovery, then try the cwm v4 adryn recovery, then try the stock kernel, and then the system image, all in Odin... In that order
oh, and cobitts15... Your dumb... always do a nandroid backup, even if its something simple...
and you are using the wrong Odin... try doing a wipe from within the stock recovery, and if that doesn't work, then download the RIGHT ODIN and flash that file... then go through the steps easily found within the development thread and get cwm working...
can i use heimdall instead of odin? i have a mac
ntien said:
i don't know how i messed it up, i was just doing stuff in CWM and when i tried rebooting my phone, it was just stuck at the samsung screen. it didn't actually show the boot animation, just the part that says samsung in white letters. when i try to apply sdcard:update.zip i get the following:
# MANUAL MODE #
update.zip gone
E:Can't mount /dev/block/vold/179:9
(No such file or directory)
E:Can't mount SDCARD:bplib_delta_for_test.bin
--Install from sdcard...
Finding update package...
E:Can't mount /dev/block/vold/179:9
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
update.zip gone
Click to expand...
Click to collapse
Mine did the same thing when I tried to use the new CWM to restore an old backup but I went back to the old CWM and it worked like it should
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
ntien said:
can i use heimdall instead of odin? i have a mac
Click to expand...
Click to collapse
You have a Mac. There's your first problem peoblem there
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
circa881 said:
Mine did the same thing when I tried to use the new CWM to restore an old backup but I went back to the old CWM and it worked like it should
Sent from my SCH-I400 using XDA Premium App
---------------------------------
Jill plays tricks, Jack plays God
Click to expand...
Click to collapse
Try whatever he said first, then try what i said...
And yeah, sure... Heimdall it up... Just remember to put things in the right places, and if the files are .tar'd up (which some are) then extract them with 7-zip.. You will get an error sometimes, just ignore it....
ntien said:
i don't know how i messed it up, i was just doing stuff in CWM and when i tried rebooting my phone
Click to expand...
Click to collapse
Define "doing stuff". That could be anything, like constantly tapping the volume button scrolling through one screen, or playing with the mounts and formatting options. The more detail you can give about what you were doing, the easier it will be to solve the problem.
trailblazer101 said:
oh, and cobitts15... Your dumb... always do a nandroid backup, even if its something simple...
and you are using the wrong Odin... try doing a wipe from within the stock recovery, and if that doesn't work, then download the RIGHT ODIN and flash that file... then go through the steps easily found within the development thread and get cwm working...
Click to expand...
Click to collapse
What ODIN should I be using? Is there any way to flash it back to stock factory rom? I really didn't want any mods/roms, just wanted my Google search
Thanks again.
Okay so I have an update, I got the phone working and calling again. I was finally able to flash it with stock kernal and system files using the proper version of Odin (thank you trailblazer101) in this thread.
http://forum.xda-developers.com/showthread.php?t=967165
Only problem now is that my 3g or wireless doesn't work, any ideas to fix this?
can you go to settings, about phone, and tell me what is says for baseband?
si400.0.6v.dl17
Hmm... I would've thought that was going to be blank....
Well, all I can say is to try flashing the clean rom in cwm, and do a user wipe...
And it wouldn't hurt to first try to reactivate... Go to dialer and type in *228 then when you hear the lady's options choose 1...
Try that first xD
Sent from my SCH-I400 using XDA Premium App
I tried to do the re-activate thing, still nothing.
I'm getting a replacement handset sent to me for free but I wanna try and see if I can fix this before I send it back just for experience sake so at this point if I brick it trying new things I don't care because I got a new phone.
So if anyone has any experimental ideas let me know
I had the same thing happen to me a month ago, but it hung on the verizon screen instead of the samsung screen. Seems our stock dumps don't contain the information to do DNS resolving. If you notice, the WiFi and 3G are both out, because you can't get DNS to work properly. I feel like if we bindiff the dumps with the actual phone we could get an idea of where we can't get, but i guess our problem is actually accessing the part we aren't getting.
in50mn14c said:
I had the same thing happen to me a month ago, but it hung on the verizon screen instead of the samsung screen. Seems our stock dumps don't contain the information to do DNS resolving. If you notice, the WiFi and 3G are both out, because you can't get DNS to work properly. I feel like if we bindiff the dumps with the actual phone we could get an idea of where we can't get, but i guess our problem is actually accessing the part we aren't getting.
Click to expand...
Click to collapse
That's exactly what's going on with my phone, no 3g or wifi
The phone been crashing on me like crazy and it force it's self to reboot, just to crash even more weird. Well the phone won't boot up, it just get stuck at the t-mobile part. What i did before doing anything crazy to this phone, just did a basic let pull the battery out, and see if this fix it. After two times nothing, I did the gfree way to root the phone. Here my phone details.
Glacier pvt eng s-off
Hboot- 0.85.2007 (PD1510000)
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
oct 11 2010 12:44:14
I did hours of research to figure out my error I'm getting on the phone, I can't find a way get this fix..When I boot up the phone to HBOOT it's trying to do a sd checking and try's to find PD15IMG.zip it doesn't find it. I launch Recovery, Once It loading up CWM v5.0.2.0. I get this errors
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
So this isn't good, I even know that. So what i did wipe data and cache it does it fine and works. So when I try to restore it wont let me at all, so that mean it corrupt, so im stuck now. Did my research on here, some say to flash a new rom, well i did and didnt work at all, it came to a point that it wouldn't let me installed a rom also. I just need help with this, I really need to use my phone. I had to installed the a rom doing a ADB way, it work but it still won't boot up at all. Can anyone help me with this?
Do you have a bad eMMC? Have you checked it?
At this time, the first priority is to boot up the phone. so return back to the stock Rom.
Just follow this steps for an error free installation.
1. Download the stock 2.2.1 rom here.
2. Rename it to PD15IMG.zip
2. Place it on the root of your sd card.
3. Remove the battery and Switch On your phone while holding the Power button & the down volume button.
4. The hboot menu will update your phone (do according to the hboot instructions).
Once you are in the stock Rom, check the eMMC. If it is good, you can proceed with rooting.
febycv said:
Do you have a bad eMMC? Have you checked it?
At this time, the first priority is to boot up the phone. so return back to the stock Rom.
Just follow this steps for an error free installation.
1. Download the stock 2.2.1 rom here.
2. Rename it to PD15IMG.zip
2. Place it on the root of your sd card.
3. Remove the battery and Switch On your phone while holding the Power button & the down volume button.
4. The hboot menu will update your phone (do according to the hboot instructions).
Once you are in the stock Rom, check the eMMC. If it is good, you can proceed with rooting.
Click to expand...
Click to collapse
IF THE BOOTLOADER SHOWS FAIL-PU THEN YOU ARE BRICKED. Fail-PU means failed partition update, nothing could be written to the eMMC chip, since the chip has died.
Sent from the HTC Glacier Sense 3.0 using XDA premium app
Please look at Glacier Wiki, section "Troubleshooting". Link in my signature.
saranhai said:
IF THE BOOTLOADER SHOWS FAIL-PU THEN YOU ARE BRICKED. Fail-PU means failed partition update, nothing could be written to the eMMC chip, since the chip has died.
Sent from the HTC Glacier Sense 3.0 using XDA premium app
Click to expand...
Click to collapse
I haven't check if the eMMC is bad or know how too, but I'll do a search to see how. I'm not getting a fail-PU at all. I can't get hboot to read the PD15IMG.zip file to update and get this to stock. It just saying no img. Is there a other way of doing this?
ANubis.Ice said:
I haven't check if the eMMC is bad or know how too, but I'll do a search to see how. I'm not getting a fail-PU at all. I can't get hboot to read the PD15IMG.zip file to update and get this to stock. It just saying no img. Is there a other way of doing this?
Click to expand...
Click to collapse
Hm maybe a bad download. Try the download again. This is the only way to get back to stock.
Sent from my HTC Glacier using xda premium
saranhai said:
Hm maybe a bad download. Try the download again. This is the only way to get back to stock.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Is there a way to do it by adb? I know my sd card isn't bad cause it read fine on my laptop. Also if i did the gfree way, would I have to remove it?
I got a fail-pu, for some reason my sd port isn't reading. As I can see there no way on fixing this error. So my best bit would be replaced the motherboard. thank you guy for the help..
ANubis.Ice said:
I got a fail-pu, for some reason my sd port isn't reading. As I can see there no way on fixing this error. So my best bit would be replaced the motherboard. thank you guy for the help..
Click to expand...
Click to collapse
Fail-PU means failed partition update, which means the eMMC chip died, which basically, to sum it all up means you're bricked.
Sent from my HTC Glacier using xda premium
Ok, here's the deal. I was turned on to heimdall by our beloved Trailblazer101, so I tried to flash a rom via that. Something got borked in it, and now i have no download mode(when i try to boot into dl mode, either via vol down or cwm, it takes me right back to stock recovery), and I'm getting error
E:can't mount dev/block/st111 (invalid arguement) in stock recovery, and
E: Can't mount dev/block/st111 (File still exists)
E: Can't mount recovery/log
E: Can't open recovery/log
in CWM.
I can still flash successfully, but flashing kernel and a known good rom has no effect.
I'm thinking, even though I never did anything with the bootloaders, and it never got tp factory.rfs before heimdall crashed, there might have been something that got screwed up in the boot.
If anyone has any ideas, I'd appreciate it. Maybe one of the experts could find a way to get something in a flashable zip?
OK, i do have adb in cwm... so I can push via adb. As soon as I figure out what to push, where
and you really asked this in the wrong section...
I have the cure. Will post in 1 hour.
Sent from my SCH-I400 using XDA App
http://forum.xda-developers.com/showthread.php?t=1311988
Read this.
asellite said:
http://forum.xda-developers.com/showthread.php?t=1311988
Read this.
Click to expand...
Click to collapse
Thanks.... I've got the error issues resolved. Were you having issues with samsung logo no coming up, and it kicking you straight into stock recovery? DId this help that? That is my current issue.
No, I haven't had that issue yet but if you flash the Odin package from that link with the samsung PIT file (i4000) at the same time (make sure repartition is checked ONLY works w that Ron) it should resolve any/all issues.
Sent from my SCH-I400 using XDA App
Asellite, thank you for the help. I appreciate it. And much love to Ciscogee, for the stock ec07. I AM Back!
I'm at war with the world, cause i ain't never gonna sell my soul. No matter what, I can't be bought or sold. - Skillet
Anytime!
Sent from my SCH-I400 using XDA App
moved to correct area....
closed