Database Users

HELP PLEASE i need original TMN portuguese rom

Please can some one help me to find portuguese TMN original rom because i have a 3300 stuck in bootloader and i this rom is my last hope
best regards

enduromen said:
Please can some one help me to find portuguese TMN original rom because i have a 3300 stuck in bootloader and i this rom is my last hope
best regards
Click to expand...
Click to collapse
Have you tried the one in the HTC site?
I think that that is the closest thing to your original ROM (In WM6). Because i think portuguese TMN doesn't have a self ROM.
Cheers

Zecanilis said:
Have you tried the one in the HTC site?
I think that that is the closest thing to your original ROM (In WM6). Because i think portuguese TMN doesn't have a self ROM.
Cheers
Click to expand...
Click to collapse
Boas mas se a TMN nao tem rom propria porque as rom oficiais portuguesas dao invalid id? e nao deixa carregar a rom.
Thnaks but why the original portuguese rom say invalid id?
obrigado

enduromen said:
Boas mas se a TMN nao tem rom propria porque as rom oficiais portuguesas dao invalid id? e nao deixa carregar a rom.
Thnaks but why the original portuguese rom say invalid id?
obrigado
Click to expand...
Click to collapse
Is your PDA originnally Portuguese?
O teu PDA era Portugues quando o compras-te?
cheers

sim é portugues, bloqueado a TMN. So que nao sabia o que era o uspl e agora esta bloqueado em boot ao tentar actualizar. e agora preciso a rom original
yes is portuguese and is stuck in bootloader and i need de original rom

I have 2 units of 3300 whit same problem and can´t find the rom´s
I need 1 for TMN and other to OPTIMUS

Rom's
Eu tenho ambas, alias tenho todas! Mas em principio não deve resultar! tem de ser aberto e aquecer num lado que so os tecnicos e que conhecem! (Eu por exemplo) este modelo dá muito problemas! Se soubessem quantos e que recebemos por semana voces assustavam-se! LOL! Vou ver se arranjo um sitio para por as EXTended Rom's!

caixote_filth said:
Eu tenho ambas, alias tenho todas! Mas em principio não deve resultar! tem de ser aberto e aquecer num lado que so os tecnicos e que conhecem! (Eu por exemplo) este modelo dá muito problemas! Se soubessem quantos e que recebemos por semana voces assustavam-se! LOL! Vou ver se arranjo um sitio para por as EXTended Rom's!
Click to expand...
Click to collapse
This is an english forum.
You have to post it in english also, or this thread can be deleted...
Cheers

(Para brasileiros) X10a Original brazilian firmware

Ola amigos, por favor alguem pode dizer se a Sony Ericsson ja disponibilizou o firmware brasileiro com suporte a dual touch?
Estou utilizando a versao Global, mas a versao brasileira possui um software que nao esta na versao Global.
Sent from my X10a using XDA App

Olá!
É bom ver que colegas do Brasil estão presentes no fórum! A última versão de todos os firmwares para todas as operadoras do Brasil (e a versão genérica) é a 2.0.A.0.504, ou seja, a primeira versão do firmware para X10 com Android 2.1. A Sony Ericsson sempre atribui o atraso na distribuição de atualizações às operadoras "parceiras", porém, até o firmware sem marcas está desatualizado.
Por uma questão de uniformidade, seria interessante que você publicasse posts em inglês ou com versão em inglês, afinal, outros colegas de outros países podem nos ajudar, certo?
--
Hello!
It's nice to see that we have brazilian people participating on this forum! The latest firmware version for all carriers in Brazil (and generic firmware too) is 2.0.A.0.504, the first X10 firmware with Android 2.1. Sony Ericsson always says that the delays on update rolling out are the partner carriers, but even Generic firmware is delayed over here.
To keep uniformity in our forum, it would be interesting if you post in English or with a version of the post in English, because, eventually, somebody from other country may help us, right?

Antes do 2.1 houve um patch não lançado pras operadoras brasileiras, então duvido que disponibilizem esse.
-----
Before 2.1 there was a patch not available to brazil, I don't think they will release this branded...

Qual o aplicativo que você precisa? Talvez seja mais fácil encontrar o tal aplicativo e fazê-lo rodar na FW global do que ficar na expectativa das operadoras brasileiras atualizarem patches.
Which app do you need? Maybe would be easier to find this app and make it run on the global FW, than to wait in expectation to the brazilian carriers to update patches.

Hi, thanks. I'm using X10a World Generic version, but I need the Dialler Prefix software, otherwise I need to insert the dialler prefix code to any contact register.
It's a nice software because you can to change the network operator without pre edition to dial.
Sorry about portuguese text, but I put the question before without any reply, then I needed to try. Anyway my english is so poor.
Sent from my X10a using XDA App

You can install the operator prefix app using root explorer.
Just put it on data/app folder and use the same permissions of others apps.
Sent from my bed...

Anybody have the 1232-4526 firmware for flash tool? Can't find it any where and can't get SEUS to repair my phone back to it.

Eu uso a firmware do Wolfbreak, android 2.3.3, e roda direitinho no meu x10a. Quanto aos prefixos, eu habilitei no chip para ele colocar e funciona perfeitamente. O único problema é que eu não sei acessar o menu do chip com este firmware (acho que falta o software).
Minha operadora é a Vivo.
________________________________________________________________
I use the firmware Wolfbreak, android 2.3.3, and runs right into my X10A. As for the prefixes, I enabled him to put on the chip and it works perfectly. The only problem is that I can not access the menu of the chip with this firmware (I think it lacks the software).
My operator is VIVO.

Galera estou com problemas para desbloquear meu x10 da claro.... ja tentei com a claro mas ela passou uma key q deu inválida... será que alguem me ajuda a desbloquear o aparelho?

Give 'Operadora DDD' a try!
It's much more functional than Dialer Prefix original app and I'm sure it will suit perfectly for your usage.
https://market.android.com/details?id=com.camerum.android.app.operadora&feature=search_result

[HELP!] Need stock TMN rom

hi guys.
i've formated my pc and forgot about my backup of my rom and the stock recovery.
Any of you can send me the original recovery and a link to download the stock TMN rom?
I really need it. I've digged alot in
this forum and others and cant find any download link, unless those from huawei wich did not work :S
Thks in advance

i'm installing the stock rom. I think i don't need more help from you
thks anyway.
Can you delete this post!?
thks in advance!

btw, if someone needs the link for the rom, let me know

Hello ggunzio,
Please send me the link.
Obrigado

nrdl said:
Hello ggunzio,
Please send me the link.
Obrigado
Click to expand...
Click to collapse
hello xD
ve a tua caixa de mensagens, tens la o link!

Rom tmn
Por favor, arranjas-me o link com essa rom tmn, é q o site da huawei está em baixo e n deixa fazer o download.
Já agora, é a B136? Obrigado

Podes-me enviar tambem o link? nao consigo tirar do site da huawei
obrigado

Isso ainda se arranja por ai??????
Obrigado!

http://www.megaupload.com/?d=ED6AFVPH
here you have it

Thanks Loureiro.
Obrigado,pah
Sent from my u8800 using XDA App

[Q] Problem after actualization

Hi, I install the new actualization 4.0.2.A.0.62 and now I have problems in the screen, the touch of one rectangular 1 cm X 1 cm area in the centre of the screen IS NOT WORKING! What can I do ??? I have done downgrade and the problem still . Sorry about my terrible english.
PS: alguem aqui é brasileiro? se sim, eu to com um problema no meio da tela. Depois que eu atualizei pro ultimo software disponível, o touch do meio da tela não funciona, to desesperado, o que eu faço?

sorry ...
I don't know

Seems like u've semi-bricked your phone.. Flash another Kernel if that doesnt work send it in for repair...
Sent from my LT15i using XDA App

[Q] Customs Roms in 2.3.6 rentail.

Hello, my milestone 2 is with the rentail official rom, version 2.3.6 of Brazil. And currently I am interested in two customs roms:
cm72-111215.1631-nightly-Milestone2-GB-v1.3 and Argen2Stone30. Both for GB kernel.
I can restore these roms on my phone without problems? Argen2Stone30 recommends version 2.3.4 rentail UK to apply the path, but is it really necessary? Multiupload is offline now and I can not download the 2.3.4 UK.
Thanks for the help.

I am writting this with A3S with 2.3.6
Works ok
Sorry my bad english
Desde el ñoba usando Tapatalk

Hello friend. Really thanks for the reply.
Here's an error happening when I perform the restore with ArgentoStone 3.
After checking the checksum (nandroid.md5), an restoration error occurs.
The ArgentoStone's zip not have a boot.img. So I tried to restore this file by ClockworkMod. But this procedure also resulted in an error when writing the file.
You had to do something more besides restore using nandroid?
See you soon and thanks for the help.

I had no problems with the installation.. perhaps the file was corrupt in the downloading..
Download again the zip and then try to restore again the nandroid using "Advance Restore"...
BTW waht version of cwm do you have? because I used cwm 5 to restor the nand..
and the A3S's zip not have a boot.img because is only a System nand..

Version 5??
Hey I'm still using version 3.1.0.0 that came with the Droid 2 Recovery Bootstrap.
You installed your ClockworkMod directly by Rom Manager?
Probably this is the reason for my restoration errors.
Is there any difference between using the Droid 2 Recovery Bootstrap or Rom manager?
I think i can't update the ClockworkMod of Droid 2 Recovery Bootstrap to version 5.
Really thanks for the help.

Hello, I updated the Droid 2 Recovery Bootstrap to version 1.0.0.5 and the CWM has been updated automatically.
Now the restore process works normally.
Even so the rom did not work.
Wipe the cache, wipe davik, wipe the battery, after that apply the restoration.
When I restart the phone, the animation boot of ArgentoStone appears, but the boot of operating system does not occur.
Does anyone know why this happens?

Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!

benito.brazil said:
Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!
Click to expand...
Click to collapse
If you have bootloader 3, you can try Endless7 downgrade method... see the topic to learn how to check and downgrade: http://forum.xda-developers.com/showthread.php?t=1497263

Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.

igor.mr said:
Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.
Click to expand...
Click to collapse
wow Thank you.
According to this tutorial, it is still necessary to perform the downgrade kernel to install these custom roms.
Arriving home, I'll try to install the rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 without performing the downgrade to see if it works.
If not work, I think the downgrade is my last option. XD
Thank you.
wow Obrigado.
Segundo esse tutorial, ainda é necessario realizar o downgrade de kernel para se instalar essas custom roms.
Chegando em casa eu irei testar instalar a rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 sem realizar o downgrade, para ver se isso funciona.
Caso não funcione, creio que o downgrade seja a minha ultima opção. XD
Obrigado.

The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.

caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).

lampwarez said:
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).
Click to expand...
Click to collapse
Thanks, now I understand.
So, I just do the downgrade of the endless, then the installation of CyanogenMod will work, right?
I think this method will not do the installation of ArgentoStone work, since it is a different build.

Many people are having the same problem that I with ArgentoStone and nobody knows how to solve it.
According to the forum, it should work normally on 2.3.4 or 2.3.6 UK BR.
If someone needs the sbf 2.3, to install ArgentoStone. Here are some links, as Multiupload is offline.
http://www.wupload.com.br/file/2602239057 2.3.4 UK
http://depositfiles.com/files/g7p3llfm5 2.3.6 BR
http://www.fileserve.com/file/fvb7Vn3

caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
I dont know anything about CM because I never install that rom..
But I'm still using A3S in 2.3.6 kernel... I use last version of 2nd init port to defy by walter79 (from MS2Ginger rom), I not use Droid 2 recovery bootstrap..
http://www.4shared.com/zip/z_zeYLEn/bootmenu110-CWM5032Milestone2.html
There's the lates bootmenu, just install it in CWM. As for the bootlooping, you might have to wipe your data,cache and dalvik after you install the bootmenu...