[Q] Digitalizer broke itself? - Touch HD General

Ive read similar situation in the forum, but most people state or they will send it cause it is on warranty (mine isnt) or they will get a new digitalizer from ebay or something close then try to fix it.
But my case seems a little bit different, i didnt drop it, i didnt get it wet, i didnt do anything and nothing happened to it!
I was playing bejeweled before bedtime and when i stopped as always i layed it at my night stand without any problems. Next day i woke up ( i use an old phone in offline mode as my alarm clock thank god) and just grabbed it as always and without hitting anything just went down the stairs, and when im at the street i wanna listen to some music and when i tried to use it, it seems the screen is not aligned, he recognizes my touch, but everything seems out of place (touch wise).
So thinking it could only be a rom problem i did task29 and reinstalled another rom, and nothing changed, then i tried a different rom from a different cook and it doesnt skip the alignment screen at first, but then i repeatadly (but gently) tapped many times in the crosses then it managed to get to the phone, but i cant just use it.
Btw the bottom buttons (phone call, home, back) dont work either, only end call sometimes works.
How can a digitalizer brake from night to morning alone?-_- Any thoughts?

Related

Accelerometer

hi guys.
i just got my T-mobile G1 today and i seem to have a big problem. the tilt sensor is not working. what can i do to check if it's a hardware issue or software? i updated it to RC30 and tried different versions 1.41 then back to 1.31 and now i'm back on official no root RC30 and still no luck. any ideas? i tried "bubble" and labyrinth from the market and nothing is moving.
thanks
My guess is its a hardware problem cause I've used the "bubble" app on all three versions and never had a problem with it..
When you first get your G1 it will have been in the package for a while. This happened to me when I first got mine. As stated in many forums, Tip: Enter an application that uses the Gyro/Accel mode i.e. Maps Streetview or Compass. Now hold the G1 in your hands (do this over a bed or couch in case you drop it), and turn it end over end, side over side back in forth for about 30 seconds. Also, give the battery cover a firm tap with the tip of your finger a few times. This will losen up the moving parts of the Accelerometer in your phone and then it should work fine. This also happens when you get your phone close to a magnet.
Brutal-Force said:
When you first get your G1 it will have been in the package for a while. This happened to me when I first got mine. As stated in many forums, Tip: Enter an application that uses the Gyro/Accel mode i.e. Maps Streetview or Compass. Now hold the G1 in your hands (do this over a bed or couch in case you drop it), and turn it end over end, side over side back in forth for about 30 seconds. Also, give the battery cover a firm tap with the tip of your finger a few times. This will losen up the moving parts of the Accelerometer in your phone and then it should work fine. This also happens when you get your phone close to a magnet.
Click to expand...
Click to collapse
I had the same problem with the compass. The needle didnt move very much but it moved strangely when I tilt my phone up and down... Then I turned on GPS, went to Maps and shaked the phone a bit some seconds and after that it worked.
It was working when I got my phone and anytime the problem happened, but now everything is ok.
tried both solutions and no luck ( i tried the compass and bubble program and shake it and turn it and tapping and also tried a magnet and still no luck. any other solutions?
Mine worked when I first got it. And quit working twice (so far).
Both times a hard reset and wipe fixed the problem for me.
My problem sounds like a software issue, I sure would like to know where the settings are to reset it without a wipe.
I'm not sure if your problem is software or hardware; but you can try the hard reset/wipe and see if the compass works.
just tried hard reset and still no luck . i think it's a hardware problem.
problem solved. phone replaced. please close the thread

is there any solution to "screen can't switch on"?

at the begining , my HD is fine.
But , after 2month , the phone has some rotation problem( it doesn;t matter, as you can solve it by pressing the on/off buttom )
But now, the phone's screen can't switch on, when i touch the four buttom on the surface of phone, it still vibrate..just i can't switch on the screen"
i have already tried all the things like take out the battery, press the reset buttom... the problem still occur,
Screen can sometime turn on luckily~
but, if the phone's screen is switched off for a while, the problem still occur..
can any professional heal my phone?
likashing said:
at the begining , my HD is fine.
But , after 2month , the phone has some rotation problem( it doesn;t matter, as you can solve it by pressing the on/off buttom )
But now, the phone's screen can't switch on, when i touch the four buttom on the surface of phone, it still vibrate..just i can't switch on the screen"
i have already tried all the things like take out the battery, press the reset buttom... the problem still occur,
Screen can sometime turn on luckily~
but, if the phone's screen is switched off for a while, the problem still occur..
can any professional heal my phone?
Click to expand...
Click to collapse
Obvious questions: Have you tried a hard reset?, Diff rom? Have you loaded up anything weird that mighta casued issues? If it will do a hard reset then do it. Start from scratch. If it works then be mindful of what you reload it with. If that doesn't get it, try a diff rom. At this point you got nothing to lose. Will it go into bootloader mode?
Battery comes to mind also. Have you run it down to nothing? Sometimes that will affect the charging capabilities. When the screen is dark can you still hear sound? Def do the HR.
My suggestion would be, to give the HD to your reseller and get it fixed.
I have had the same problem, and as my HD also didn't connect to my PC anymore, I send it in, and got a brand new one, because they couldn't fix it. Make a backup while you can, because the problem will get worse over time.
Likashing, the same exact thing started to happen to me a couple days ago. I've hard reset and flashed a new ROM. It seems that the problem is intermittent. After I just let the phone sit for a few minutes, the screen will come back on. It makes me wonder if this is heat-related issue. Anyway, I'm screwed, because I have no warranty since I bought it from a guy in Australia (I'm in US and needed the T8285).
I'll definitely be keeping an eye here to see if there's any resolution other than repair.
while the screen does not turn on, have you maybe tried to use another phone to call your HD and check if the screen turns on when the call arrives?
maybe if the screen turns on it's more a software related issue (so hardreset et cetera might be worth a try), if not, i fear it's hardware
crashDebug said:
while the screen does not turn on, have you maybe tried to use another phone to call your HD and check if the screen turns on when the call arrives?
maybe if the screen turns on it's more a software related issue (so hardreset et cetera might be worth a try), if not, i fear it's hardware
Click to expand...
Click to collapse
Good point crashDebug... I will definitely try that the next time the behavior is exhibited (right now is one of those times where I can't intentionally duplicate the issue... of course!)
stpete111 said:
Likashing, the same exact thing started to happen to me a couple days ago. I've hard reset and flashed a new ROM. It seems that the problem is intermittent. After I just let the phone sit for a few minutes, the screen will come back on. It makes me wonder if this is heat-related issue. Anyway, I'm screwed, because I have no warranty since I bought it from a guy in Australia (I'm in US and needed the T8285).
I'll definitely be keeping an eye here to see if there's any resolution other than repair.
Click to expand...
Click to collapse
...i have no warranty too....
in Taiwan , there are couple of people have these situation, the maintenance staff working Htc, said that it is a motherboard problem or the screen problem...but i wonder that why only few people have this problem. My phone is completely fine before i flash the HSPl1.56OLINEX.but when i try to flash back to Hspl 1.4 , the problem still happen.....
cbreze said:
Obvious questions: Have you tried a hard reset?, Diff rom? Have you loaded up anything weird that mighta casued issues? If it will do a hard reset then do it. Start from scratch. If it works then be mindful of what you reload it with. If that doesn't get it, try a diff rom. At this point you got nothing to lose. Will it go into bootloader mode?
Battery comes to mind also. Have you run it down to nothing? Sometimes that will affect the charging capabilities. When the screen is dark can you still hear sound? Def do the HR.
Click to expand...
Click to collapse
i have tried diff rom and diff HSPL....
sometimes, the phone's screen still can turn on luckily, then i can go to bootloader mode, but if the phone sit for a while, the phone's screen can't turn on...then i can't get into bootloader. ..
i can hear sound when someone phone me...but the screen still keep dark!
Exactly same problem here
HTC purchased in Sweden.
Cant switch screen on, when incoming calls come it rings but no screen alive. Vibration when pressing the buttons at bottom. And the low battery sound i can here when low on battery.
When connecting it to charger the orange light at power button will not light up (orange) as usually.
My problems started when i had the HTC in my jacket pocket, a VERY rainy day, so the phone was moist OBS not wet. Thats what i beleive ghappened to my phone.
And now i can not find the purchase receipt to the phone
It might be entirely unrelated, but the screen on my THD also had the same problems immediately after a few flights from coast to upcountry 1800m elevation during summer. The system powered up but the display remained off, and no amount of fiddling would switch it on.
The first time it took a few hours and then spontaneously corrected itself. The second time I had to remove the battery for two days, and then all was fine again. Only happened after flights from coast in summer. It hasn't happened again, but then it's winter here in the southern hemisphere.
I suspect condensation, but that's only a guess...
I have the same problem too here in Australia. It started with the screen not turning on but the buttons still work. Then you'll sometimes notice the screen is inverted and upside-down.
I've sent mine in for service. Haven't got it back yet but I understand the motherboard needs to be replaced.
In short, this is definitely a hardware problem and if you look around the discussions on the net, this is slowly becoming quite a common problem with HD.
forumx said:
I have the same problem too here in Australia. It started with the screen not turning on but the buttons still work. Then you'll sometimes notice the screen is inverted and upside-down.
I've sent mine in for service. Haven't got it back yet but I understand the motherboard needs to be replaced.
In short, this is definitely a hardware problem and if you look around the discussions on the net, this is slowly becoming quite a common problem with HD.
Click to expand...
Click to collapse
Yes exactly, I have had the upside down screen too! Well at the very least it is good to know that people are experiencing this problem other than me. I love this phone so I will have to pay to for the repair. If anyone here has any idea or estimate of what this will cost, please share this here.
The problem for me was the moist, after three days it started to react again... And now it seems to be working...
I guess the air up in the mountains are moist... maybe...
AddeBC said:
The problem for me was the moist, after three days it started to react again... And now it seems to be working...
I guess the air up in the mountains are moist... maybe...
Click to expand...
Click to collapse
So then that's two people so far (including AFW from the first page) who have said that after some situations involving moisture have passed, things are back in working order. I hope for the same to happen soon.
so it is due mainly to wateR?
leobox1 said:
so it is due mainly to wateR?
Click to expand...
Click to collapse
I doubt it is related to water. My device never gets near water or moisture and still experience this problem. I do wonder if it is heat related as the device can get quite hot during charging and perhaps cause the motherboard to play up after a while.
btw, does any of you use some sort of plastic/silicone cover. I wonder whether this type of cover blocks the heat from dispersing.
As i understand it, so far only people who have flashed a different ROM (and with it maybe radios) to their device. If it's a heat issue it could be something to do with the radio version. I have tried different radios and there was one in particular that heated my phone up like crazy while i was listening to music without the screen on (but i don't recall which one it was).
I only used stock rom and never flash my device and still have problem...
forumx said:
I doubt it is related to water. My device never gets near water or moisture and still experience this problem. I do wonder if it is heat related as the device can get quite hot during charging and perhaps cause the motherboard to play up after a while.
btw, does any of you use some sort of plastic/silicone cover. I wonder whether this type of cover blocks the heat from dispersing.
Click to expand...
Click to collapse
I do not have any type of cover on mine.
I agree with the possibility of it being a heat issue though.
Very perplexing. This past weekend I again travelled from Joburg to the coast (from 1800m elevation to sea level), and again the THD screen stopped responding to input whilst at the coast. I desperately fiddled, reflashed, hard reset at least 10 times to see if I could get the screen to work, but it always booted up locked, and no amount of fiddling would do anything. I even put the thing on an oil heater for a few hours, hoping that if condensation was the culprit (my current theory) then a goodly dose of heat would at least evaporate any moisture, and once, for about a minute the screen responded, and then again went dead to touch. I had to use another phone all weekend. This evening, on returning to Joburg, I resolved to get another device, maybe the Diamond 2. After a few hours back home I retrieved the THD, put in the SIM and, lo and behold, it worked fine. This is most vexing, but I fear the THD will have to go -- I just can't live with this unreliability. Sad, really, because I love the big display, I love the fact that guys like Throy are cooking good ROMs. In many ways the THD is about the best out there, at least for my needs. But that &@&* thing has to be reliable.

HD2 Touch Screen Not Responding

Hi Guys i hope somebody who knows about capacitive touch screens can help me! I have taken my HD2 apart to fix a smashed camera lense. On removing the back cover i used a small screwdriver to prise off the back case and unclip it all round. It came off with no problem, i fixed the camera and put it back together. When i turned the device back on the touch screen isn't responding to my finger on any screen. Like i turned the touch screen off! The hard buttons still wok but nothing from the screen. Nothing looks damaged (I.e the glass isn't smashed). I seem to think i might have damaged something when prising the cover off with the screwdriver. Please, any suggestions would be really helpful!!!
Can anybody out there help with this? I am currently without a phone :-(
I have exactly the same problem, but it happened from nowhere. I didnot unscrew anything. Please Help
Check the flex cable.. this part are very delicate.
is this :
http://img.diytrade.com/cdimg/92507...creen_Full_LCD_for_HTC_Touch_HD2_HD_2_LEO.jpg
same problem
ive got the same problem, mine just stopped working, i performed a soft and hard reset, removed the battery still nothing. it worked for a moment but once locked it stopped working again, only the hard buttons.
same problem but it works on and off. basically the screen will respond until the phone is put into hibernate. the after that id have to push the phone button and end button back and forth until it responds
Same Issue independant of ROM
Same issue here.
Funny thing is it started a week or two ago randomly out of the blue.
Same scenario:
lock the phone can't get touchscreen to respond for unlock
Judging by these posts everyone started seeing this about the same time, maybe it's a software issue or background app .
Help!
I have same problem. It can work for a couple of hours or in 1-2 days then just stop responding, almost every time when in hibernate. Lets just hope it's not hardware failure.
This started happening to me this morning. Out of 50 tries, managed to unlock the phone three times only. This happened out of the blue, right after i removed my phone from the charger.
Have soft reset, hard reset, reflashed ROM, but the issue still remains.
I really really hope this is not a hardware issue.
Does anyone out there know how to solve this? My phone is virtually unusable right now...
Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.
dio62000 said:
Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.
Click to expand...
Click to collapse
You're probably right.
I've also tried everything. But kind of strange that if I lock when not on home tab it seems to work. And the screen, almost always, reacts as it should as long as I just dont' lock it.
I just started to get this issue. touch screen works fine until it hibernates. reflashed, still happens. found this in my search:
htcphones.net/htc-hd2-problems-with-touchscreen/
just got off the phone with tmo. they are sending me a new one.
Yeah, it happened to me as well. I opened a new thread like a month ago explaining the problem: http://forum.xda-developers.com/showthread.php?t=710282&styleid=15
and I contributed in another one concerning the same issue here: http://forum.xda-developers.com/showthread.php?t=708530
Summing all up, it ain't caused by a software or a ROM of some kind (at least in my case) because soft and hard resets didn't solve it nor did the flash of a stock ROM. The most probable cause is a digitizer (touchscreen) defect that appears randomly and totally out of the blue. The only thing to do in my opinion is to send the phone in for repair, which I did. It came back with a check mark on "calibrated screen" checkbox. As of now phone's working fine and I hope they solved it even though I read of other people who have had their leo's screens completely replaced..
A curious side note: htc care reset to zero my phone's call duration timers..
I'm not sure if it's the screen. In my case I think it's the connector from the screen to the motherboard, because pressing the housing seems to help.
But let's see if HTC is able to repair it, I hope they are, because the problem is so random they might not even see it
After losing functionality on my touch screen for a week, finally decided to send it in. Took the trouble to revert my HSPL to original and Stock Rom.
Repair should take about a week. Now I'm stuck with an ancient Nokia 6230i for this week. I feel so lost without my ppc. Have had one for as long as I can remember.
Hopefully the phone comes back okay...
I've had so much problem with the screen not responding so I did all backup then reflashed, hard reset to put the device back to stock. Did this during the weekend, I even fired up my old iphone 3g to have as backup phone.
All set today to go to the store and have it repared under warranty.
But since Sunday evening it works perfect. I've been testing it a lot and the screen has not stop responding even once.
This might be just temporarily but does anyone else experienced something like this?
Mine sometimes worked well for hours... days... but eventually the problem came back.
Mine died on me when I was actually out of the country (stuck in Vietnam without a phone). It would work for 5 minutes, then stop for hours. I would have to switch my phone on and off for a couple hundred times before it worked for another 5 minutes...
Got so tired of it that i sent back my HD2 for warranty repair. Expect it to be back tomorrow (or Friday at the latest). Hope there's no further problems with it.
I hate to say it, but the HD2 is known for its highly defective touchscreen. Even when it's working, a lot of people experience strange and bothering events, such as the touchscreen "touching" itself, a very high/very low screen sensitivity all of a sudden, the tilting of the screen to one of the four corners of the device and so on and so forth.
With a device so expensive one would expect it to work flawlessly. Seems to me that HTC doesn't think the way we do...

Digitizer gone - but not completely dead... Any advice? [VIDEO]

Hey my lovely XDA-ers, I'm really hoping for some magic here...
Yesterday my HD2 digitizer just stopped working... the Touchscreen will not respond to any inputs. It was bitterly cold outside so I was half hoping that an overnight stay in a warm room would help, but no avail...
The thing is, on one in every 5 restarts, I get a small amount of life from it. One one in 15 restarts, I get full use. So there's still life in there.
I could understand if it broke because I dropped the phone/squashed it, but at the time I was just playing Robo Defence, completely normal use, when all of a sudden it stopped responding.
I've uploaded a video, which shows how, occasionally, the bottom fifth of the screen works. However, as shown, when I'm using the top half of the screen, the digitizer appears to be receiving input from the bottom of the screen, as though I'm trying to perform a multi-touch action. For this reason I'm hoping there still be some way to rescue the phone without an expensive repair job. I bought it in March from XDA Marketplace, and it's served me faithfully since, but because of that I do not think I have the manufacturer's guarentee, or insurance
I've hard-reset, I've reflashed my ROM, I've tried in both WM and Android (my usual OS at the moment), I've reflashed over WM ROMs, and the problem stays the same... (also read all related threads!)
Sorry for inverted nature of vid!
So does anyone have any suggestions to try? Otherwise I might go through a £130 repair service on htcrepairs.co.uk - they do not show up on a forum search so I was wondering if anyone had used their service before?
Thanks all, appreciate any ideas.
Edd
Very odd indeed. I don't have a solution for your problem, but a suggestion. It is a long shot, but might help.
Whenever i had similar problems with my Wizard (i know, kind of old but one of the best older devices every made by HTC), i opened it and cleaned it from the inside and checked all the connections of keyboard, touchscreen, etc. to the mainboard. Sometimes it helped...
In the end, if you buy the replacement kit, you anyway have to open the HD2, so why not try this in prior to buying the kit...
A lot of people seem to have this problem. There's a lot of information on it here. Do a search. But the short answer is its a hardware problem. If your phone is still under warranty send it back. I think HTC will fix it for free if It's less than a year old. But try your carrier first.
Sent from my HTC HD2 using XDA App
BAD NEWS...
i had EXACTLY this happen to me. eventually it totally stopped responding. Only option is to replace the digitizer.
GOOD NEWS..
After a month of searching, I found a really good guy to do it. www.iexpertstudio.com . The owner is VINCE. you can email him on his site. He charged $110 including mailing it back to me. He replaced the LCD and digitizer and sent it back. All works perfectly now.
I see you are in the UK so dont know if it makes sense to send it to the US. Alternative is to go on ebay and buy the screen/digitizer and replace it yourself.
(BTW normally i would have chucked the device, but even after 1 year I still dont think there is as versatile a device as the HD2. Had the DHD been 3G useable in the US I would have bought one.)
Thanks for the feedback guys, I've been doing some investigation my end (and you're right, there are similar threads on here, but none which had a "half-screen working" problem.)
I've narrowed the culprit down to my "Back" button. It's somehow exerting pressure on the screen, leading to either a non-responsive digitizer or an input at the bottom of the screen.
I might add this to an entry in the "ANDROID KILLS YOUR BUTTONS" thread
My choice is to live manually with it, or get the company mentioned in the first post to give it a good clean, but whether it's worth £80 just yet is a question for me.
Anyway, thanks for your input, guess this thread will close, but to any readers in future, if your screen seems to die, see if it's pressure on the screen caused by the buttons!
I can totally support your reasoning.
I haven't had any problems whatsoever with the touchscreen in almost a year of honoured career of this phone, while this morning I was trying to unlock it with no success (nothing special happened, I even used it 10 minutes this morning already). At first I thought it was the usual "sleepy" behaviour of the screen right after waking up, butafter sliding down the hdmini style unlocker at least 10 times with no effect I really started freaking out :O
I have longpress endkey set on instant reboot, and after that it seemed working... just not for too long.
To cut to the chase, what in my opinion supports your idea of hardware buttons interfering is:
sometimes, as I have LMT installed, with the tap&hold option enabled, swiping with just one finger triggered double swype instead (as if the screen detected a second, firm press on the screen elsewhere even if I sure as heck was swyping with one finger)
using mymobiler didn't work as well; if it was a hardware touchscreen problem, mymobiler should work, as it simulates touches, so it will just do its job even if the touchscreen is totally dead... while, IF the hardware touchscreen detected a firm press somewhere, mymobiler wasn't able to actively simulate another press
repeatedly pressing on the end key (which seems to be the culprit in my case) apparently solves the problem, as I can use the touchscreen again; also, a prolonged cycle of hibernating with end key, waking with end key, swyping down the hdmini lock (repeat at libitum) seemed to work, as if I dislodged something by activating the button so often
What I don't understand anyway is: HOW can a button pressing on the digitizer be exerting a touch action? If this was a resistive screen, I'd understand, but it's capacitive, and not even capacitive pens are so good as fingers in activating the touch. The buttons are just plastic with a metal contact underneath, and this metal contact shoudl by no means be anywhere near the digitizer.
Bah.
I know I have 2 years warranty on this device, but being far from my phone during the warranty processing gives me the creeps, so I'll just go on using it and pray this to be the defaillance of one sunday morning not to be seen again... after several soft resets (and fantasizing about a new rom flash, which I need anyway for other reasons) the problem seems to have settled by delicately bashing on the end key. The unlock slider is responsive after every wake up now... FOR now.
Praying...
My screen also died. So the only thing I have to do is press on the end key for a couple of times to make it work again?
lol, that's ONE possibility.
Just saying, in my case it worked, and still does since it happened once more this evening, so it's definitely got something to do with the hardware keys messing around (and hopefully dislodging themself for good, or I'll have to send it back for servicing), anyway in your case it could also be a dead digitizer, so no go
let's put all this about touch screen in 1 sticky thread pls.
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
smeddy said:
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
Click to expand...
Click to collapse
ditto.
Actually, I don't like having paid good money for a defective phone, but being without HD2 for up to a couple of weeks to one month (maybe? have no idea how fast HTC servicing is) is troublesome. I may buy for a deal a blue angel as a spare, yet, no GPS...
The most problematic event is if you get the "stuck" screen during a call.
In my case, it's the end key that messes it up; if the screen's dead, pressing twice the end key, firmly enough (once for screen off, then again for screen back on) wakes up the screen, and apparently, during a ringing incoming call, you can press the hardware end key without rejecting it, so it's a viable option (not taking into consideration the fact that trying to wake up the screen takes time, and the caller may give up after a while if you're not fast enough).
But if for any reason the screen gets stuck while the call is connected, I am stuck too, as to wake it up I should press the end key thus hanging on the other party.
Sad story.
EDIT: forget what I wrote, pressing end key while phone is ringing WILL reject the call. I tried it before during a real incoming call and apparently it didn't do it, but now it just did.
I also have a HD with a dead screen....
Only thing here is I have sent it back twice already to TelSuck here in Australia only to have it returned after the tech has wiped it over and reflashed it for me... What helpful little imps they are!
Code:
http://www.youtube.com/v/T6ssqmpRIB0
Its drivin me nuts sending it away for 3 weeks at a time to have someone with just enough grey matter to be able to wield a screwdriver tell me nothing is wrong.
Happy to try any suggestions!
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
ephestione said:
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
Click to expand...
Click to collapse
I will try that - it seems to happen more frequently when plugged in and charging, and now more buttons seem to be the cause/fix (e.g. now the home-button, or when I am on home-screens the phone will swipe "left", whereas before it would swipe "right". I'll keep playing.
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
I'm having same trouble now whit my phone except problems started mouth ago. After some period I again power up my phone and suddenly everything worked perfectly. Unfortunately this last only for two days and then exactly same problems happened, partially function screen.
As far as I know only good solution is replacing digitizer... I already ordered one for me.
exactly the same problem for me.. I sent it back with warranty yesterday
smeddy said:
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
Click to expand...
Click to collapse
Ditto.
Actually, my warranty lasts two years, which means until 2012, anyway I cannot stand risking to lose calls because the screen dies on me in the wrong moment, and the only way to wake it up is pressing the endkey (which by the way is the only "cure", and apparently never the cause).
I will be uploading a video on youtube regarding this, also to show it to the guys at the HTC support who will be asking me to hard reset and reflash until annoyed to death (as if that will solve anything)
Bump
This is the video that I just uploaded to youtube:
http://www.youtube.com/watch?v=C3-PNYwpYeI
EDIT: One day after, the problem has become way more frequent, 1 out of three times I wake up the phone, diugitizer is dead and I need the " on the end key to make it work
Uploaded another video on youtube with problem showing on vanilla lockscreen so HTC support doesn't try and tell me it's CHT lockscreen's fault
Last bump.
Screen has ben promoted from "hardware key problem" to "permanent death".
Now I can use the phone with mymobiler, but I can't anymore with touch, I seem to not be able even to wake it up even by pressing on end key
Re-flashing last official rom upgrade now to see if anything changes... yeah,sure
Ouch - good luck, hope mine doesn't go that way...

[Q] LCD not working, screen and digitizer fine, what could be the problem?

Hello all!
I would like your opinions/knowledge on how likely you think it is that my problem is a simple disconnected cable, and if it would be worth it to take apart my phone (I've never done it before.. but I'm careful) to see if I can just reconnect it.
I woke up one morning and my screen would not turn on =( I did not drop it or get water on it, although it had been very humid. The screen is not cracked and it is still responsive to touch (vibrates when touched on the soft keys on the bottom) but it is completely black, no flickers, no faint images, no nothing. I also have not seen the LED light up since this has happened, when charging or plugged into my computer or anything. My computer DOES recognize the phone, and I have used the Motorola utility to update my phone since this has happened, but that did not fix it. I have tried all of the key combinations and I have successfully rebooted it (I can hear the droid start up noise, the camera sound when I hold power and down volume at the same time, and it sounded like I almost accidentally made a call when messing with it last night).
I have not yet been able to factory restore it or anything like that from recovery, as I am flying blind, but I'm thinking this is a hardware problem with the LCD?
The phone is not rooted and boot loader is not unlocked. It's only a few months old but I bought it used online so there's no returning it or anything like that.
I just don't know enough about any of this to know how to proceed next. Any help would be appreciated! Thank you for your time!
SunLilac said:
Hello all!
I would like your opinions/knowledge on how likely you think it is that my problem is a simple disconnected cable, and if it would be worth it to take apart my phone (I've never done it before.. but I'm careful) to see if I can just reconnect it.
I woke up one morning and my screen would not turn on =( I did not drop it or get water on it, although it had been very humid. The screen is not cracked and it is still responsive to touch (vibrates when touched on the soft keys on the bottom) but it is completely black, no flickers, no faint images, no nothing. I also have not seen the LED light up since this has happened, when charging or plugged into my computer or anything. My computer DOES recognize the phone, and I have used the Motorola utility to update my phone since this has happened, but that did not fix it. I have tried all of the key combinations and I have successfully rebooted it (I can hear the droid start up noise, the camera sound when I hold power and down volume at the same time, and it sounded like I almost accidentally made a call when messing with it last night).
I have not yet been able to factory restore it or anything like that from recovery, as I am flying blind, but I'm thinking this is a hardware problem with the LCD?
The phone is not rooted and boot loader is not unlocked. It's only a few months old but I bought it used online so there's no returning it or anything like that.
I just don't know enough about any of this to know how to proceed next. Any help would be appreciated! Thank you for your time!
Click to expand...
Click to collapse
it would still be under warranty by motorola - especially if you accepted the OTA recently (May 2013).
otherwise, I would try leaving it plugged in for awhile (30-60 minutes), then try rebooting it (hold down all 3 buttons)
Thank you for replying!
jco23 said:
otherwise, I would try leaving it plugged in for awhile (30-60 minutes), then try rebooting it (hold down all 3 buttons)
Click to expand...
Click to collapse
I have tried this.. I can hear it booting up but still no screen =(
it would still be under warranty by motorola - especially if you accepted the OTA recently (May 2013).
Click to expand...
Click to collapse
How do I go about collecting the warranty on a phone that I bought used? And what would happen if it showed water damage? I swear I have not gotten any water/liquids on it, but this did happen after it was very humid out for a while, and I have read that high humidity is enough to spread the red dye (regardless of whether or not high humidity actually caused the problem)
SunLilac said:
Thank you for replying!
I have tried this.. I can hear it booting up but still no screen =(
How do I go about collecting the warranty on a phone that I bought used? And what would happen if it showed water damage? I swear I have not gotten any water/liquids on it, but this did happen after it was very humid out for a while, and I have read that high humidity is enough to spread the red dye (regardless of whether or not high humidity actually caused the problem)
Click to expand...
Click to collapse
call motorola (or go to their website and bring up a chat session in their online support section)
Try tapping it somehat hard with your finger all around the phone to see if it flashes the screen.
scottocs said:
Try tapping it somehat hard with your finger all around the phone to see if it flashes the screen.
Click to expand...
Click to collapse
No luck =( I've already tried "pinching" the phone somewhat hard all over too... Thank you for the input though!

Categories

Resources