Related
Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
usadevil7193 said:
hi mate...i m new to android..i own a nexus1..hav rooted without unlockin d bootloader..i am tryin to push d track ball to wake mod...evry time i type adb remount it says permission denied..any ideas to get things workin...???????
Click to expand...
Click to collapse
Welcome to XDA and Android! Are you trying to get help for your Nexus One? This forum here is specifically for the HTC Hero CDMA.
You will probably find better and more specific help in the Nexus One forums which are here: http://forum.xda-developers.com/forumdisplay.php?f=556
Great post, very easy to follow, thank you.
yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help
this also works for the samsung Galaxy S in recovery mode.
mikeybonez28 said:
yea I'm trying to do this, over and over, but with not luck. i have sdk on my pc and im running the cmd prompt to run adb remount & devices and its not picking up the phone, wth is going on, plz help
Click to expand...
Click to collapse
mine shows up but then says error, device offline
hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx
yogi2010 said:
hi, i have adb recognizing my phone, but i still can't seem to push the files over.... every time i try, i get 'cannot stat 'su' : No such file or directory'. i have made sure over and over to put the files in the same folder where adb is.... actually i have tried placing the files in the tools folder, as well as the platform-tools folder, and i keep getting that error when i try to push anything.
any suggestions? thx
Click to expand...
Click to collapse
i had the same issue with something i was trying to push. I think you need to make sure you have exactly the same file name like caps and all. i was trying to push rootexplorer.apk and i got the same message but i then changed it to RootExplorer.apk and it work.(notice the difference in caps)
just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers
Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?
{LCD}Stelios said:
Does it matter where sdk is installed my file path is
C:\Program Files\Android\android-sdk\tools
instead of
C:\android-sdk-windows\tools.
I just installed it in the default location.
I type adb remount and get the not recognised command.....
Thanks.
I don't think my phone is being picked up?
Click to expand...
Click to collapse
Make sure your have the drivers for your phone installed first of all.....Then, in your command prompt you have to change directories to the sdk (which you made harder by not installing to C:\
Try: cd Program Files\Android\android-sdk\tools
Then type: adb devices
That should return "xxxxxxdevice" connected....Then you know you have it set up.
Look in kyouko sig he has all the commands for adb
Sent from my HERO200 using XDA App
Bierce22 said:
just watch this and it'll explain everything.
http://www.youtube.com/xdadevelopers
Click to expand...
Click to collapse
great video arse....thanks for the help donkey
Flashing fresh ROM via ADB in Linux
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo
pacut said:
Hello there.
M volumeUp and VolumeDown buttons are broken on my rooted Desire HD, so I cannot go through CWM any longer.
With regard to this post, I would ask the followings:
1) can this method be used to flash a new ROM (i.e. Coredroid, Leedroid..) without the need of those 2 buttons ?
2) My PC runs Linux. How does it work with this O.S. ?
Thanks
paolo
Click to expand...
Click to collapse
There is a thread somewhere on how to flash without a SD card and flashed using adb I believe, but don't take my word for it. Adb works fine with Linux, just have to set it up differently. Look in my sig and select the compile aosp on Ubuntu one and follow instructions on getting the USB set up.
Sent from Dorian's HTC Hero CDMA
Yes, I saw it. It's http://forum.xda-developers.com/showthread.php?t=911228
The fact is...still have to navigate through menu via VolumeUp/volumeDown buttons
Maybe through ROM manager, premium, I can install ROM direclty.
I am gonna trying
YES ! It works !
Hi I need help. I accidentally wipped my phone in CWM and now I'm trying to use adb push to push the update.zip into my phone sd everything seems to work but then in CMW it says there are no files..
any suggestions?
[Edit]
nevermind
I kept trying different locations
not sure which one did the trick but I'll list the one's I tried
so \update.zip /sdcard/
.... /sdcard/update.zip
(note I put "/update.zip" thinking maybe it needed to be reallocated to the same file/destination
Can i use adb push *.apk /system/app to push several files at once, and then repeat but using *.odex instead of *.apk? I keep ending up getting the same error, and i want to find out which app is messing with me...
rulermon said:
Prerequisites have...
A:android-sdk-windows installed
B: (on your phone) go to menu>settings>applications>developement and make sure usb debugging is checked.
C: the file you are pushing must be placed in the tools folder of adb so if you are pushing file "build.prop.txt" this needs to be downloaded/copy and pasted in C:\android-sdk-windows\tools
1: go to run and type cmd (or just open your command prompt)
2: cd C:\android-sdk-windows\tools
3: adb remount
4: adb devices *if everything is set up right this should output a serial number*
5: adb push FFFFFFF.FFF /#####/###### *i hope my notes help here you need to put the file name in for the F(s) and in the pound signs you put the destination on the devices example adb push build.prop.txt /system/bin
6. repeat step 3 for multiple files
7. adb reboot this is how you finish
Click to expand...
Click to collapse
Hey guys ...
I have also rooted my phone , everything was OK until one day i tried to write something to /system/app and i recieve this error:
in Addition , i am writing "adb shell" and it shows me $
if i am doing adb shell --> $ --> su --> it shows #
Can some1 knows what is the problem?
I read many thread but didn't find clear answer for this question.
I have a vodafone htc legend with froyo updated trought ota
I would, root it and install HTC rooted rom.
any body can help with the steps and tools need it?
thanks a lot
follow this http://android.modaco.com/content/htc-legend-legend-modaco-com/323201/downgrading-from-froyo-ota/
it is not rooting, it is downgrade, what's not same
rolks said:
it is not rooting, it is downgrade, what's not same
Click to expand...
Click to collapse
he have official froyo... then he must downgrade first or what??
FIRST HAVE TO DOWNGRADE
follow this http://android.modaco.com/content/htc-legend-legend-modaco-com/323201/downgrading-from-froyo-ota/
Click to expand...
Click to collapse
THEN U CAN ROOT
http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/
Great!
If I undertood right...
First downgrade (this is something we could not avoid) then root.
Let me try!
Ill back!
Thanks
MontseCat said:
Great!
If I undertood right...
First downgrade (this is something we could not avoid) then root.
Let me try!
Ill back!
Thanks
Click to expand...
Click to collapse
i followed these steps and now i have rooted legend with BlaYo ROM B 0.2...
GOOD LUCK
I tried yesterday and having some troubles with Android sdk, doesn't work I don't know if any trouble with its installation.
Need to read carefully the instalation process and try again.
The only issue is find time for ths... its chrismas so, some familiar meetings
I'll back!
Oh!
I tried once again with not succes.
when running "crackin"...
starts with...
"Copying tools"
"adb" is not recogniced as command internal or external
program or file executable...
And remainds with same message for serveral lines till finish!!
Nothing happens.
I installed the android sdk package and added the hack4legend-v5.zip contenst on android-sdk-windows\tootls folder
Obviously I am doing something wrong but I am not able to locate where the problem or mistake is!!
any idea?
thanks
I downgraded my Legend from the OTA 2.2.
Now the ROM version is 1.31 which should be correct, but the HBOOT version still is 1.00, which is according to this guide (http://forum.xda-developers.com/showthread.php?t=746454 ) the wrong one, it should be 0.43.... any ideas on this one?
Edit: @MontseCat: have you installed your USB drivers? The come with HTC Sync from the HTC homepage. Otherwise you can check adb functionality by opening a console window, running 'cd C:\Absolute\Path\containing\adb.exe\' (for Windows users, I guess Linux users know how to use cd) and then 'adb devices'. This should show a number refering to your device, opposed to simply nothing if it is not working.
nae64 said:
Edit: @MontseCat: have you installed your USB drivers? The come with HTC Sync from the HTC homepage. Otherwise you can check adb functionality by opening a console window, running 'cd C:\Absolute\Path\containing\adb.exe\' (for Windows users, I guess Linux users know how to use cd) and then 'adb devices'. This should show a number refering to your device, opposed to simply nothing if it is not working.
Click to expand...
Click to collapse
Sorry I don't follow you at all.
I currently have my legend working with HTC Sync, witout problems, so don't undesrtand, shall I remove an reinstal it after installed android sdk to?? or..
thanks
No, that was just my problem at first when I had to move to a Windows PC for the downgrade, adb requires HTC Sync. So you should be fine.
But now that I read your problem again, my solution would not even fit I guess your tools directory does not contain the adb.exe. But the directory platform-tools in the android-sdk folder does. I just copied over the contents of the hack zip to platform-tools and did it from there... what ever, now I am having the problem i described above...
nae64 said:
I downgraded my Legend from the OTA 2.2.
Now the ROM version is 1.31 which should be correct, but the HBOOT version still is 1.00, which is according to this guide (http://forum.xda-developers.com/showthread.php?t=746454 ) the wrong one, it should be 0.43.... any ideas on this one?
Edit: @MontseCat: have you installed your USB drivers? The come with HTC Sync from the HTC homepage. Otherwise you can check adb functionality by opening a console window, running 'cd C:\Absolute\Path\containing\adb.exe\' (for Windows users, I guess Linux users know how to use cd) and then 'adb devices'. This should show a number refering to your device, opposed to simply nothing if it is not working.
Click to expand...
Click to collapse
Hmm my HBOOT version is 1.01
Sent from my HTC Legend using XDA App
Okay, thank you very much, root completed successfully even with HBOOT v1.00
nae64 said:
... But the directory platform-tools in the android-sdk folder does. I just copied over the contents of the hack zip to platform-tools and did it from there... what ever, now I am having the problem i described above...
Click to expand...
Click to collapse
I done as you said and succed,
Now the problem is
CR--rw----
So fails
the message at the end is xxxx permision denied.
I don't konw how to put an image of the scren. sorry
what whall I do now?
MontseCat said:
I done as you said and succed,
Now the problem is
CR--rw----
So fails
the message at the end is xxxx permision denied.
I don't konw how to put an image of the scren. sorry
what whall I do now?
Click to expand...
Click to collapse
- Temproot with VISIONary r13 (install the downloaded file as per a normal APK)
- Once you are temprooted, connect via 'adb' and do 'su' (to get root) then '/data/local/flash_image misc /data/local/misc1-2.img'
You should then be able to downgrade in the normal way.
janarp said:
- Temproot with VISIONary r13 (install the downloaded file as per a normal APK)
- Once you are temprooted, connect via 'adb' and do 'su' (to get root) then '/data/local/flash_image misc /data/local/misc1-2.img'
You should then be able to downgrade in the normal way.
Click to expand...
Click to collapse
Ok I Istalled the Visionary and temorary root,
I don't know how to connect via 'adb' and do su...
so, just stoped here and waiting next instruction. Sorry work as neel!!
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
janarp said:
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
Click to expand...
Click to collapse
even with this guide I didn't succed!!!
What I done is just temporary root with visionary then run again the adb but remains the same,
sorry I don't see where lost!!
In the following I will assume a Windows-PC:
1. Restart your phone to start from scratch, make sure 'TempRoot on boot' (or sth along this line...) is NOT checked
2. Run the crackin.bat, which you put (along with all other files in that download) into the directory containing the adb.exe (which is, at least for me, the platform-tools directory)
3. when it fails (it will), TempRoot using VISIONary, leaving everything unchecked (no System Read Write, even if that seems like a good idea)
4. on your PC, go to a Terminal (Windowsbutton + R, enter 'cmd' without quotes, press enter) , navigate to the folder crackin.whatever is in using the cd command like in my following example, but with the correct, full path
Example: 'cd "C:\\Programm Files\Android\andorid-sdk\platform-tools"' (again, without the single quotes (preserve doublequotes))
5. in that same Terminal Window, enter 'adb shell' (again, without quotes). The prompt should change to a dollar sign. Then enter 'su' (you know, without quotes...), and when the prompt changes to a '#', the TempRoot was successful and we can resume. Make sure to leave that Terminal open, you can use it again when rooting.
6. On a Windos System (32bit preferred) run the RUU.something.exe and follow these steps.
7. follow the main rooting guide, in which you will have to open a Terminal Window in the directory you unzipped. This is done with the same method I described above (opening cmd, 'cd' command)
I hope this makes it more clear =)
Edit: btw, this is a full guide, feel free to pick out the stuff you need, because I really did not understand what your problem was =) as a rooting guide I used this: http://forum.xda-developers.com/showthread.php?t=746454
MontseCat said:
even with this guide I didn't succed!!!
What I done is just temporary root with visionary then run again the adb but remains the same,
sorry I don't see where lost!!
Click to expand...
Click to collapse
i belive u have same folder names like me...
first i connect my phone with pc then i open command (start and type cmd)
Code:
cd C:\android-sdk-windows-1.1_r1\tools
then
Code:
adb shell
and then
Code:
su
and then follow nae64 post
point 6 and 7
I am having a bit of difficulty rooting my g2. I am not sure if its related to my os or not but i can not get it to work.
I have followed this and tried it all kinds of different ways.
addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/[/url]
I can get to my run command after doing all of that and it shows my serial number after typing adb devices but after that i can't enter any info in the sdk run command promt.
I have not been able to gain temp root yet because it won't let me enter the commands. I went to try to re-install java/sdk manager yet again and now it says java is not in the right path.
Any help?
If you're having troubles with ADB, why use it? You don't need ADB anymore to root the G2. It can all be done by placing the files on the SD card and running Terminal Emulator on the phone. You can run any of the prompts from ADB in the phone instead. I rooted my first G2 this way. It took some getting used to coming from a phone with a 1-click root, but it wasn't hard.
Check the Wiki, pretty sure it outlines this method as well.
martonikaj said:
If you're having troubles with ADB, why use it? You don't need ADB anymore to root the G2. It can all be done by placing the files on the SD card and running Terminal Emulator on the phone. You can run any of the prompts from ADB in the phone instead. I rooted my first G2 this way. It took some getting used to coming from a phone with a 1-click root, but it wasn't hard.
Check the Wiki, pretty sure it outlines this method as well.
Click to expand...
Click to collapse
Do you have a link for that method i would be glad to try it but i am not sure what to search for, cant find it under rooting g2 with sd card
Also i am trying to gain permanent root if possible
901-Memphis said:
Do you have a link for that method i would be glad to try it but i am not sure what to search for, cant find it under rooting g2 with sd card
Also i am trying to gain permanent root if possible
Click to expand...
Click to collapse
Yep let me grab a link for you (theres actually a video tutorial I wanna try and find). But basically instead of using ADB to push the files to the correct location, you just have to manually put the files in the right locations on the SDcard, which is where ADB pushes them anyways.
K so I followed this method: http://www.youtube.com/watch?v=tU9zn_BEth4
The files he refers to are in this thread: http://forum.xda-developers.com/showthread.php?t=833965
Now different people have had different issues with this. I personally had some issues where it tells you to run #sync, because my perm root wouldn't stick properly after reboot. If this doesn't work properly, I'm sure someone can help you with your drivers to get ADB working.
I should also say that you don't necessarily have to do this method with the initial temp root via visionary, you can simply do the one outlined in the Wiki for rooting (aka http://forum.xda-developers.com/showthread.php?t=834228 ), but just place the files manually and run the commands in terminal emulator.
If you got the adb devices command to work you are actually in good shape. You are supposed to enter all of the commands from what you are calling the "run command" prompt anyway (the one you used for adb devices).
martonikaj said:
I should also say that you don't necessarily have to do this method with the initial temp root via visionary, you can simply do the one outlined in the Wiki for rooting (aka http://forum.xda-developers.com/showthread.php?t=834228 ), but just place the files manually and run the commands in terminal emulator.
Click to expand...
Click to collapse
Unfortunately this won't work (if you don't want to use ADB, Visionary must be used to get temp root). ADB is needed in order to push the files directly to the phone. If you try copying the files to the SD card first, you won't have the correct permissions to copy the files to the phone in Terminal. You are also not allowed to execute programs directly from the SD card (mounted as noexec), so you can't try to obtain temp root from there. If you want to use the gfree method of rooting without using ADB, I made a guide using Visionary for the temp root here: http://forum.xda-developers.com/showthread.php?t=928160.
But the OP actually has ADB working, so he should be able to use any of the guides.
This is the error i get now if i try to enter anything in the sdk manager run prompt box. Is there some place else i should be entering the commands?
Uploaded with ImageShack.us
901-Memphis said:
This is the error i get now if i try to enter anything in the sdk manager run prompt box. Is there some place else i should be entering the commands?
Click to expand...
Click to collapse
You are supposed to be using the regular command prompt (I think you referred to it as the "run command prompt" earlier). It is the prompt in which you successfully ran the "adb devices" command. That is the only prompt you need to use.
Do i enter commands 1 at a time or all at once?
901-Memphis said:
Do i enter commands 1 at a time or all at once?
Click to expand...
Click to collapse
First off, Yes you enter each line as you see it.
Second just to make sure you are in the right area to enter these commands, to get to command prompt you can either search for it from the start menu or hold the "windows button + R".
That opens your run command from there type in "cmd" and that opens command prompt.
Next make sure your current directory is the one you installed adb into. To get to that you can type "cd C:/...... whatever folder you installed it to."
To make sure my adb is working I usually type "adb devices" and see if my phone shows up.
Good luck
Glad to see someone else from the good ole 901 around here =)
Sent from my HTC Vision using XDA App
Okay does anyone have a better guide to rooting?
I got all the way to pushing all the files on the sd card and running the terminal emulator where it shows forked children, reboots the terminal emulator and then i can not enter /data/local/gfree -f
sync
It wont find that file
901-Memphis said:
Okay does anyone have a better guide to rooting?
I got all the way to pushing all the files on the sd card and running the terminal emulator where it shows forked children, reboots the terminal emulator and then i can not enter /data/local/gfree -f
sync
It wont find that file
Click to expand...
Click to collapse
try pushing the file to that folder again
Re-Tried everything at least 3 times, including pushing the files that didn't go.
I give up Ive spent so much time on this only to have it fail at the most unlikely times.
Will wait for another method to root come available
You could try downloading and installing Droid Explorer. It installs adb and fastboot files in its install folder.
Are you sure you actually pushed all of the needed files to your phone correctly (i.e., no errors appeared when doing so)? Which guide are you following and what were the specific errors you are getting? Once you have temp root, running gfree and obtaining permanent root only takes a few more minutes...
Also, did you try any other guides (like the one I linked to earlier)? If you are waiting for a new method of rooting, you might be waiting for a while (since the existing methods work, I don't know how actively people are working on new methods).
ianmcquinn said:
Are you sure you actually pushed all of the needed files to your phone correctly (i.e., no errors appeared when doing so)? Which guide are you following and what were the specific errors you are getting? Once you have temp root, running gfree and obtaining permanent root only takes a few more minutes...
Also, did you try any other guides (like the one I linked to earlier)? If you are waiting for a new method of rooting, you might be waiting for a while (since the existing methods work, I don't know how actively people are working on new methods).
Click to expand...
Click to collapse
Using this guide
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
I get an error when i attempt to enter this into the emulator on my phone
adb shell chmod 777 /data/local/gfree
and it doesn't do anything
901-Memphis said:
Using this guide
http://wiki.cyanogenmod.com/index.php?title=TMobile_G2:_Rooting
I get an error when i attempt to enter this into the emulator on my phone
adb shell chmod 777 /data/local/gfree
and it doesn't do anything
Click to expand...
Click to collapse
You are supposed to do that command from your computer. (The instructions state "On the computer, open terminal and type the following commands".) Here, terminal means the command prompt that you've been running all of you other ADB commands from.
If you wanted to run the command from terminal on your phone, you would just type "chmod 777 /data/local/gfree".
You don't need ADB for G2s.
trance2315 said:
You don't need ADB for G2s.
Click to expand...
Click to collapse
Can someone link me a better guide for my G2 so that i can try this 1 more time ?
Maybe a link to the top choices for versions of android to run once i get it rooted?
I've finally decided to try to root my G2 but can't get past the ADB setup. I downloaded the SDK, but when I open the manager and try to install platform tools it goes through the motions and then tells me nothing was installed. When I open a command prompt and type "ADB devices" it doesn't recognize anything. What am I doing wrong??
EDIT: specifically, when I try to install platform-tools it tells me it couldn't create a directory and nothing was installed.
66 people have read this and nobody has any suggestions to help?
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
I have a problem after rebooting my PC: <Java not found...> Reinstalling doesn't help, adding environment variables too. Any idea?
Just root using the rage/visionary method. No adb needed and very easy to do. Here is the linkhttp://forum.xda-developers.com/showthread.php?t=834228
Sent from my SilverBullet 'HTCDesireZ running CM7'
juvanni said:
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
Click to expand...
Click to collapse
I don't understand? I'm trying to root following the recommended wiki instructions, and I haven't been able to get adb to work so I haven't gotten past that step.
Are you running windows x64? Cause the android installer has issues detecting java on x64 systems.
When it says 'Can't find java' or whatever the error is, click back, then next again, it should find it the second time around. Well thats what happened for me anyway.
-Nipqer
If you're on froyo just use the app z4 root or universal androot
You can also use superoneclick root 2.11
Its very easy and it only take about 3 minutes
Stewie just said that!
I appreciate the help so far, but my problem is I have gingerbread and everything I've read requires froyo for root, and the only way I've read to downgrade uses ADB, so any non-ADB rooting method still won't work for me. I've followed the "ADB for dummies" thread and the other instruction thread and everything seems fine, but when I type in the first command for the downgrading it says adb isn't a recognized command. Am I in the wrong command prompt? I feel like its probably something really dumb I'm doing or not doing but for the life of me I can't figure it out.
Navigate to the folder adb is in.
Hold shift, right click in the folder (make sure nothing is selected)
select 'Open command window here' (or something along those lines)
Adb should work.
-Nipqer
OK, so I'm definitely in the right folder, I read and followed ADB for Dummies thread. Trying to follow this direction:
"Run the following command to verify the exploit has access to what it needs. (Only the first line is the command. The second line should be the result returned if all goes well.)
Code:
$ adb shell cat /dev/msm_rotator
/dev/msm_rotator: invalid length"
When I type that in, should there be spaces between the "adb" and "shell"? Should there be a space after the command prompt and before "adb"? I've tried several variations of it and it keeps telling me "adb is not recognized as an internal or external operable program or batch file."
ok you need to run the command from the folder with adb.exe in it, type it as adb<space>shell<space>cat<space>/dev/msm_rotator
If you are getting an error search for adb.exe and once found try the command again from this folder,if as you say you are in the right folder then I think you will have to reinstall adb as I just ran the command in the form above and it works so if you still get an error then something has gone wrong with the install
P.S Another way to make sure that adb is working and recognises your phone is to type adb devices, if your phone is attached and recognised then it will return a number
Thank you! I had to uninstall and reinstall the package, I don't know what was wrong but it seems to be working now. Also, I knew I was probably doing something stupid, and I was. I wasn't in the platform-tools directory for my command prompt, I was in the TOOLs directory. Just so I'm clear, every command I type into the terminal should be in the Platform-tools directory, correct?
Now, assuming I can follow all the other directions with no problems, once I get to the downgrade pushing steps, I will lose all my current settings, right? It will be a fresh froyo 2.2 like it came to me originally? Other than using Appbrain to back up my current apps, how else should I make a backup?
Final question, do I need to follow the temp root directions and push the downgrade all at one time? Or can I do the temp root and come back at a later time to push the downgrade?
First problem solved then!
Yes but follow this Step 4
Now we need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)if you want to.
Once done you can use ADB from the command prompt in ANY folder,very handy IMO.
If I was you I would set aside enough time and see it through,no point to temp rooting alone.
Get Titanium backup from the market an absolute essential app with this you can backup,upload to dropbox(Another essential app) uninstall apps and a host of other useful tools.
Read the guide first as well,good luck.
[Original post has been removed, and replaced with the following updated information]
Hi there fellow G2 users! Unfortunately, I have made a foolish mistake and now I badly need your mighty super-brains over here at XDA to help me out!
Let me start out by saying I have an LG G2 VS980 (3aa) on Lollipop 5.0.2
Now all I wanted to do was change the boring boot animation that displays on startup with one that was more neato. So I did a simple google search and found a guide which instructed me on how to do so. It had me install a "one click root" APK file, and then install it and run it - which apparently rooted my phone and gave me access to my system folder. I then went into my /system/media/ folder and renamed the original bootanimation.zip (to bootanimation-og.zip) and replaced it with a new bootanimation.zip. Everything was perfectly fine until I rebooted my phone a few hours later. It was then that I discovered that I had accidentally used a bootanimation.zip for another phone, and it was not compatible with mine! Total face palm, I know!
So now when I power up my phone, it quickly flashes that (bad/incompatible) image before going straight to a blank screen that does not allow me to do anything. Not good at all, guys! So after doing TONS of hunting around on google and a couple other forums, I still have not been able to fix it. At first, nothing was working. However, after several hours of fiddling around with things, I have finally managed to get ADB to recognize my device again! So I have made a little bit a progress.
After getting ADB to work, I did something which was suggested on a guide I found on Google - which was to use ADB to "pull" the bad file from the system folder. So I went into the command prompt and issued the "pull /system/media/bootanimation.zip" command, and it worked, sort of, I think? It ended up pulling everything out of my /system/media/audio folder, as well as the bootanimation.zip, bootanimation-og.zip, and shutdownanimation.zip files - and placed them into a folder called "bootanimation.zip" inside my ADB folder. Unfortunately, after trying to reboot my phone, it did not solve the problem. The same blank screen happens.
So then, following another guide which recommended I try "pushing" the original bootanimation.zip back into my system folder, I tried just that. I opened the command prompt and issued the "adb shell" command, followed by the "su" command - and this is where I get stuck. It shows me the #root access, but it does not allow me to type anything. I assume this is because SU is trying to display the "permission? option" on my phone - but I cannot ACCEPT it because of my blank screen issue.
I also tried booting into TWRP without installing it (using the method listed in THIS guide under "Installing TWRP"). After placing the "recovery.img" into my ADB folder and trying the "adb reboot bootloader" command, followed by the "fastboot boot recovery.img" command - it simply gets stuck saying <Waiting for device>.
So here I am, completely bamboozled. A couple of people and/or pages I have visited have suggested that I just flash back to stock using KDZ, but I have a couple of concerns regarding that. First, when I go to the "LG G2 : Go Back to Stock" guide here on XDA, it says I have to flash the same firmware that I had been using previously. When I go to the link provided to download the firmware, under the Verizon folder there are only 2 firmwares listed: "Verizon VS98024A_11.kdz" and "Verizon VS98027A_05.kdz" - neither of which are the firmware my phone was using, which was "VS9803AA" - So I am unsure if I would even be able to use this method? And second, I was really hoping I would be able to fix this without losing my data, so I would REALLY like to be 100% sure that there are no other solutions to my issue before I resort to reverting back to stock.
So this is where I hope you guys and your brilliant minds can swoop in and save me from my troubles! Is there ANYTHING I can do to save my phone, by replacing that stupid incompatible bootanimation.zip file with the original one - without wiping back to stock? If any of you are able to help me, I would be sooooo forever grateful! I will patiently await your responses. Thank you guys SO much in advance for any help you may be able to provide.
Much appreciative,
Terri (Psy)
(A very special thanks to @KennyG123 and @karandpr for the help they have attempted to provide thus far!)
PsyintZ said:
Hi guys!
I have made a serious mistake, and I feel so stupid! I was wondering if any of you awesome people at XDA would be able to save me.
I have an LG G2 vs980 Lollipop 5.0.2
So, all I wanted to do was change my startup screen to get rid of that boring LG logo and replace it with something neater. I went over to Google and found a guide on how to do this, and followed the steps 1 by 1. Everything actually worked out perfectly, but it wasn't until after I was locked out of my phone that I realized that I had used a startup image that was not compatible with my LG G2! (Total face palm!). Now, whenever I power my phone, it flashes that "neat" image that I replaced the stock one with - before the screen goes completely blank and I cannot do anything at all. That's not good!
So my question is this - Is there a way I can access my system folder without having access to my phone? I know EXACTLY what file I need to remove/edit to solve this problem! In fact, that is what is frustrating me the most. It's not some random error message out of the blue that I know nothing about. I know exactly what the problem is, I just don't know if I have access to the solution. I just really hope I don't have to wipe everything back to stock all because of a lousy startup image.
Is there a way to access the system folder on my phone so I can remove the bad file and replace it with the stock image so I can get my phone working again? If anybody can help me figure out the best method to solve this issue, I would be forever grateful! Thank you guys so much in advance!
Much appreciative,
Terri (Psyintz)
Click to expand...
Click to collapse
If you are rooted you should be able to swap the files using ADB
http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Good luck!
KennyG123 said:
If you are rooted you should be able to swap the files using ADB
http://www.droidviews.com/push-pull-files-android-using-adb-commands/
Good luck!
Click to expand...
Click to collapse
The problem with guides like this is they all have that step that says "First, you must enable USB Debugging" - which requires USB access to my phone to do. Granted, it is already enabled because I had to enable it during the process of changing out my startup image - but that makes me think it needs access to a connected device in order to work properly. And I cannot connect to my device when it locks up before booting. Whenever I try to utilize an adb command, it returns the message "error: device (null) not found."
So, I guess my question is - is it still possible to use commands like these when my phone cannot boot up and give USB access to adb?
I am beginning to lose faith in there being an option to solve this problem without just performing a factory reset, and losing all of my data. If I were to take this route, can I just use my phone's built-in option? By holding the correct keys, and then choosing to wipe all my data and return to stock?
PsyintZ said:
The problem with guides like this is they all have that step that says "First, you must enable USB Debugging" - which requires USB access to my phone to do. Granted, it is already enabled because I had to enable it during the process of changing out my startup image - but that makes me think it needs access to a connected device in order to work properly. And I cannot connect to my device when it locks up before booting. Whenever I try to utilize an adb command, it returns the message "error: device (null) not found."
So, I guess my question is - is it still possible to use commands like these when my phone cannot boot up and give USB access to adb?
Click to expand...
Click to collapse
If your screen is blank it is difficult to see if the phone is asking permission to allow the USB connection. That is most likely the problem. If you have a custom recovery on your phone you may be able to flash a ROM of the same Android version and not lose your data.
KennyG123 said:
If your screen is blank it is difficult to see if the phone is asking permission to allow the USB connection. That is most likely the problem. If you have a custom recovery on your phone you may be able to flash a ROM of the same Android version and not lose your data.
Click to expand...
Click to collapse
I'm pretty sure I do not have a custom recovery thing installed. I do not remember installing one. I simply installed a "one click root" thing via an APK file, and once that was installed, I went into my /system/media folder and renamed my bootanimation.zip file to boonanimation.zip.backup, and then put in the new (bad/incompatible) bootanimation.zip file. Those were the only steps I performed. Since it appears I will not be able to use ADB to "pull" this bad file out, and most likely will have to wipe everything and go back to stock - can I just use the built in "factory reset" option that came with my phone (by holding the volume up + power keys at the same time)? Will this just wipe everything and put my phone back to how it was when it was brand new?
Very sorry to bug you guys with all of this. I feel like such a goofball. I just wish I could get everything back to normal
Thank you guys very much for your help. I really appreciate you taking the time to help me out.
Making Progress?
Okay guys. I think I may have some good news. After a LOT of fiddling around, I managed to get ADB to see my device! When I use the "adb devices" command, it finally returns my phone's address. That's the good news.
The bad news is, upon the suggestion of a forum member, I attempted to use the "adb pull /system/media/bootanimation.zip" command to try and yank the bad file out of my system folder. It ended up pulling the entire /system/media/audio folder (and all files contained within), as well as bootanimation.zip, bootanimation.zip.backup (the original file that I turned into a backup), and shutdownanimation.zip. All of those files are now sitting in my adb folder (waiting to be put back in their spots if I can ever get back on my phone). The problem is, it didn't solve the problem. When I power on the phone, it still quickly flashes the incompatible image before going to the same blank screen.
So, I think I have made some progress. But unfortunately, the pull command did not solve the problem. Now that ADB is able to see my device, is there more that I can do? What would you guys recommend I do next in order to try and solve this issue?
Type the following commands
adb shell
$ bootanimation stop
OR
adb shell
$ su
# rm /system/media/bootanimation.zip
#mv /system/media/bootanimation.zip.backup bootanimation.zip
This might work if shell has root privileges only though ...
karandpr said:
Type the following commands
adb shell
$ bootanimation stop
OR
adb shell
$ su
# rm /system/media/bootanimation.zip
#mv /system/media/bootanimation.zip.backup bootanimation.zip
This might work if shell has root privileges only though ...
Click to expand...
Click to collapse
Hi karandpr! Thanks for your help! Unfortunately, no luck yet.
I can get into the "adb shell" just fine. However, when I type "bootanimation stop" it returns "/system/bin/sh: bootanimation: not found." And when I issue the "su" command, it puts me into the root access thing where it says "[email protected]:/ #" - but then I am unable to type anything here. I am presuming this is because it is probably asking my phone for SU Permission, only I am not able to Accept it because of my blank screen.
I'm stumped again! I do feel like I'm getting closer to fixing it, though. I just hope these aren't.... false hopes.
PsyintZ said:
Hi karandpr! Thanks for your help! Unfortunately, no luck yet.
I can get into the "adb shell" just fine. However, when I type "bootanimation stop" it returns "/system/bin/sh: bootanimation: not found." And when I issue the "su" command, it puts me into the root access thing where it says "[email protected]:/ #" - but then I am unable to type anything here. I am presuming this is because it is probably asking my phone for SU Permission, only I am not able to Accept it because of my blank screen.
I'm stumped again!
Click to expand...
Click to collapse
Do you have monitor.bat in the adb folder ?
You can see your device connected.
use the screen capture option and see if the screen is replicated on your device.
can you try this command .
adb push bootanimation.zip.backup /system/media/bootanimation.zip
also while you can use adb pull to pull all your user data ...
karandpr said:
Do you have monitor.bat in the adb folder ?
You can see your device connected.
use the screen capture option and see if the screen is replicated on your device.
can you try this command .
adb push bootanimation.zip.backup /system/media/bootanimation.zip
also while you can use adb pull to pull all your user data ...
Click to expand...
Click to collapse
I do not see monitor.bat in the adb folder.
And when I try the push command, I get "failed to copy 'bootanimation.zip' to '/system/media/bootanimation.zip': Read-only file system" - and I think I remember encounting this on another guide as well. The problem lies when trying to use the adb shell and the "su" command to mount the system drive as read+write. I get to the point where I have root access, but an unable to type the mount command because I think it is asking my phone for SU permission, and I am unable to grant it permission. Ugh! So close yet so far - and still so frustrating! You are awesome for taking the time to help me, though! Is there some way I can credit you to show my appreciation?
PsyintZ said:
I do not see monitor.bat in the adb folder.
And when I try the push command, I get "failed to copy 'bootanimation.zip' to '/system/media/bootanimation.zip': Read-only file system" - and I think I remember encounting this on another guide as well. The problem lies when trying to use the adb shell and the "su" command to mount the system drive as read+write. I get to the point where I have root access, but an unable to type the mount command because I think it is asking my phone for SU permission, and I am unable to grant it permission. Ugh! So close yet so far - and still so frustrating! You are awesome for taking the time to help me, though! Is there some way I can credit you to show my appreciation?
Click to expand...
Click to collapse
Get the full android tools from here.
https://dl.google.com/android/repository/tools_r25.2.3-windows.zip
monitor.bat should be in tools folder after you extract them.
Quick question: Does your adb work again if you reboot phone ?
if your adb works after a reboot then can you run this command and see if screen lights up
adb shell stop
karandpr said:
Get the full android tools from here.
https://dl.google.com/android/repository/tools_r25.2.3-windows.zip
monitor.bat should be in tools folder after you extract them.
Quick question: Does your adb work again if you reboot phone ?
if your adb works after a reboot then can you run this command and see if screen lights up
adb shell stop
Click to expand...
Click to collapse
Okay, I am downloading those tools and will install them shortly. I'm not sure if I understand what you mean by "work again if I reboot my phone?" Could you be a little bit more specific for my newbie mind? I apologize for sucking at this! Lol
PsyintZ said:
Okay, I am downloading those tools and will install them shortly. I'm not sure if I understand what you mean by "work again if I reboot my phone?" Could you be a little bit more specific for my newbie mind? I apologize for sucking at this! Lol
Click to expand...
Click to collapse
Lets say your adb is working now.
You remove the battery and start the phone again.
Will you be still able to access adb or not ?
karandpr said:
Lets say your adb is working now.
You remove the battery and start the phone again.
Will you be still able to access adb or not ?
Click to expand...
Click to collapse
Yeah, I believe so. For example: I power it on and let it flash the incompatible image resulting in the blank screen. Then I perform an "adb devices" check and it returns my Phone ID. Then I hold power down until the phone resets, and displays the bad image again resulting in a blank screen. I then perform another "adb devices" check and it still returns my Phone ID. If that is what you were checking for, then yes, it appears to continue working after a reboot.
Also - my download of those tools is complete. I have unzipped the Tools folder to my desktop. Would it be okay to copy the entire contents over to my adb directory? Or is that a bad idea?
PsyintZ said:
Yeah, I believe so. For example: I power it on and let it flash the incompatible image resulting in the blank screen. Then I perform an "adb devices" check and it returns my Phone ID. Then I hold power down until the phone resets, and displays the bad image again resulting in a blank screen. I then perform another "adb devices" check and it still returns my Phone ID. If that is what you were checking for, then yes, it appears to continue working after a reboot.
Also - my download of those tools is complete. I have unzipped the Tools folder to my desktop. Would it be okay to copy the entire contents over to my adb directory? Or is that a bad idea?
Click to expand...
Click to collapse
Open that folder in desktop
the go to tools folder and you will see monitor.bat
Just run it
on a side note
run
adb shell stop
and see what happens
karandpr said:
Open that folder in desktop
the go to tools folder and you will see monitor.bat
Just run it
on a side note
run
adb shell stop
and see what happens
Click to expand...
Click to collapse
Alright. When I run "Monitor.bat" it pops up a window asking me to "Provide the path to the Android SDK" - What shall I enter here?
And regarding the "adb shell stop" command - when should I enter that? Just right now, while it's sitting on the blank screen?
PsyintZ said:
Alright. When I run "Monitor.bat" it pops up a window asking me to "Provide the path to the Android SDK" - What shall I enter here?
And regarding the "adb shell stop" command - when should I enter that? Just right now, while it's sitting on the blank screen?
Click to expand...
Click to collapse
yes right now when sitting on blank screen ...
The path to android sdk is path to desktop where you extracted the folder ...
karandpr said:
yes right now when sitting on blank screen ...
The path to android sdk is path to desktop where you extracted the folder ...
Click to expand...
Click to collapse
Okay. After running the "adb shell stop" command - it appeared that nothing happened. It just went back to the standard "C:\adb>" line.
And after pointing Monitor to my desktop/tools folder, it said that wasn't a valid path. So I searched my computer for "sdk" and it found a folder with that label in Users/AppData/Local/Android/sdk - so I pointed it to that. After doing this, it ran and showed my device in the column to the left, but at the bottom it said it could not connect, and kept trying saying "Attempt 1 (Failed)... Attempt 2 (Failed).. etc..." - so I closed it, and then closed all of my other windows (including my ADB command prompt) in case any of those would be causing a conflict. And now upon re-opening it, it longer lists my device in that column on the left. Just my luck - I already broke it.
PsyintZ said:
Okay. After running the "adb shell stop" command - it appeared that nothing happened. It just went back to the standard "C:\adb>" line.
And after pointing Monitor to my desktop/tools folder, it said that wasn't a valid path. So I searched my computer for "sdk" and it found a folder with that label in Users/AppData/Local/Android/sdk - so I pointed it to that. After doing this, it ran and showed my device in the column to the left, but at the bottom it said it could not connect, and kept trying saying "Attempt 1 (Failed)... Attempt 2 (Failed).. etc..." - so I closed it, and then closed all of my other windows (including my ADB command prompt) in case any of those would be causing a conflict. And now upon re-opening it, it longer lists my device in that column on the left. Just my luck - I already broke it.
Click to expand...
Click to collapse
Try rebooting phone ....
If you get android shell again
do
adb shell
$ stop
$ start