Related
ok there a lots of different kernels around here, and as time goes on, the situation is getting more and more confusing.
so it would be nice to agree tom some convention to make things less confusing.
so I have some whishes for the kernel developpers (but even for the ROM makers). this does not really take in consideration CM7 which is specifique, but in a certain way do also apply to it.
Namin convention:
KERNEL Developper. kernel name and latest release date and eventually version.
- Kernels should basically also contain the following tools:
1. CWM
2. Busybox
3. Root (SU) installer (from within CWM) to prevent from installing the wrong version.
4. LAGFIX (if it is not included, it should be mentioned in the Kernel).
no matter what you add or modify in it, it should contain the aforementioned.
If a kernel has been tested with some ROM's it should state it in the kernel thread and also in the ROM thread, including version of the kernel and version of the ROM, this is for the ROM makers.
It should then also state what has been modified (this is mostly the case, but not all the time) or not everything.
SOUND, eventually which version, and if the voodoo configuration is working with it or not.
BLN
etc..
BOOT options:
RECOVERY
POWER DOWN
reboot
etc..
Concerning the ROM makers threads
it would be nice to have sort of a standard naming convention like:
ROM makers pseudo
Name of the ROM (marketing name)
version
date of release.
and always in this order or any order you would like to have (i prefer this one) but all ROM maker should agree to this.
And please do not forget to update the aforementioned whenever something changes, thus we don't have to search through the threads to find out if something has changed.
happy eastern and hope you all find some nice eggs.
I had to explain rooting for you some friends on facebook and made a quick summary and I thought that I'd share it here also. Some things may be wrong. I'm not a rooting genius myself, I'm pretty retarded when it comes to this stuff. Please feel free to correct me where I am wrong. Spelling and grammar is NOT a factor here. GOOGLE IS YOUR FRIEND!!!
Simple Rooting
---------------
What is Rooting? As Wikipedia states: Rooting is a process that allows users of cellphones, and other devices, running the Android operating system to attain privileged control (known as "root access") within Android's Linux subsystem, similar to jailbreaking on Apple devices running the iOS operating system, overcoming limitations that the carriers and manufacturers put on such phones. This is sort of similar to gaining administrative access on your pc where your allowed extra options that were previously locked down.
Why do you want to Root? Well that's easy, because your able to control and customize your device. Maybe you just want superuser access. Maybe you want to overclock or underclock your cpu. It's all upto at this point.
Preliminary Rooting Actions: Depending on your device, their are a certain number of steps to be taken to prepare your device. There are simple programs that can root your device for you. There are programs do this but you need to install drivers before running the programs. Theres doing it through adb in android-sdk. It's all in preference. The first thing we usually want to do is install hboot drivers onto your pc. The hboot drivers will prepare your device for the running process since it will be booting you into recovery and what not. Think of it as a BIOS of some sort. Hboot will allow you to load custom Roms and Recoveries that you choose. You can't flash anything without Hboot. The Hboot drivers that you install on your pc will prep your bootloader and allow it to do these actions. Backup your sdcard and contacts IF you want to BUT note that it is best that we wipe your sdcard and factory your phone so the Rooting process doesnt undergo any hiccups. Make sure usb-debugging mode is on. You can usually find this option in your settings under the applications tab>development tab IF your phone has those options. Once you've done all of these steps you should be ready to ROOT!!!
Rooting: Android-sdk - This is for more experienced PC Users who are familiar with command-prompt, but even if your not experienced it shouldnt be hard because all you do is type in the line they want you to type. With this process there are files that need to be downloaded and loaded into your tools folder which is under your android-sdk folder. You will typing in codes that will move the files to your phone which will root your device. This may take upto 2 hours. Unrevoked - Unrevoked is a one button rooting app that you run on your pc. This is a cake walk. All you will do is run the app and follow the directions it gives you as it moves on. This may take anywhere from 2-5 minutes. Other methods - As I stated they're are other programs that you can download on your phone which will do the rooting process for you.
Post-Rooting: The first thing we do is boot into hboot mode and make sure that we have S-OFF! If so, Success you are rooted. You can also boot your phone and check to see if you have the "Superuser" app. If so, SUCCESS you are rooted!
Nandroid/Recovery: Now we get to the fun part. What is recovery? Exactly what it sounds like. Recovery gives you the option to backup your device AS IS. This means that if something were to happen, you can restore a backup that you earlier created and your phone will be exactly in the state it was of the backup. Usually when phones are Rooted, the Clockworkmod Recovery is automatically installed. Many people use this but if you love more options then there are alternatives. One for example is Amon_RA Recovery. Amon_RA is popular among the Rooting crowd since many options are implemented. 2 ways to install this will be through Rom Manager, an app in the app market. Once the program loads you can scroll to the bottom and choose "Flash Alternate Recovery." Another way would be through Flashing. You can pick up a custom .zip file that contains the Reocvery and update it through hboot. Nandroid is basically when one has Recovery options that allows them to COMPLETELY backup/restore your device.
Choosing what to backup! If you have an Evo4G like me then you would probably want to know what to backup and save. Once your device is prepped boot into recovery and select backup and choose the items you will want to backup. If your phone is a 4G/WIMAX is VERY IMPORTANT that you backup the wimax.img or whatever 4g.img file your phone contains everytime. If somethign was to happen to your phone and your wimax/4g keys were gone, THATS IT, no more 4g for your phone EVER AGAIN!!! Is it also smart to extract the wimax/4g.img file from your backup that you created and move it to your computer just to make sure. This way you will always have it. If your using a custom a2sd(apps 2 sdcard) program, then you shoul backup your sd-ext folder as well in the options, otherwise you wont have apps when you boot your phone on.
Flashing!!! What is flashing? Flashing is loading a custom file onto your device through Recovery. You flash many .zip files that range from Roms/Kernels/Boot Animations/Scripts/Radios/A2SD/etc.... Flashing is highly addictive as well. Just ask me how many Roms I've went through.
How do we boot into Recovery? Easy. The way I do it is through an app called "Quick Boot." It allows you to Power Off, Hot Reboot, Boot into Recovery, Restart the device, etc... Another way would be to hold down the Power Button and Volume Down Button(Depends on the Device). That would bring you to the hboot screen. Then you would scroll to Recovery and select it, then Bingo you're in Recovery. That should also teach you how to boot into hboot.
ROMS: What are Roms? Think of a Rom as the base program of your phone. It would be like Windows XP or Vista, or MAC OSX and Linux on your pc. There are many different Roms to choose from for your device. There is AOSP(Android Open Source Project) Roms which is a complete stock version of Android without the add-ons that each manufacturer throw on for glossiness #inside joke. These do not-include bloatware. You have the oh-so popular Cyanogenmod Rom that a very talented team put together. You have MIUI which was built from the groundup and is very userfriendly. You have OMGB, OMFGB, Ultimate-Droid. You have customized versions of Sense, Touchwiz, or whatever your device runs. These are not AOSP version Roms. Roms are flashed in Recovery.
Kernels: Kernel is the brain of your phone. It controls the cpu and hz output for services your running, the drivers and hardware. Custom kernels allow you to underclock/overclock your cpu and select better hz management which can help save battery life. You select different governors that your kernel will run as. You can use Powersave/Performance/OnDemand/Smartass/Interactive/InteractiveX/Conservative.
Powersave tries to save as much battery as possible by reducing the amount of power your phone uses. Performance focuses on how snappy the phone should respond. It doesn't really focus on battery life but much more the performance of the phone. On Demand focuses on using power when the device needs it, basically when its being used. Conservative tries to conserve the battery life without hurting the performance of your phone too much. Smartass is conservative with a screenoff profile off 128mhz min/384mhz max. Basically its saves battery life as the screen is off, and saves battery life without reducing performance drastically when the screen is on and the phone is in use.
Min/Max controls the mhz of you phone(underclock/overclock). The max can be risen higher or lower then the set default to underclock/overclock your device. The min can be risen also: This usually helps with the phone awakening faster.
Different types of kernels: Sbc/non-sbc/havs-more/havs-less/static undervolting/etc...
SBC is very popular. It charges your phone with trickle-charging technology and keeps your phone at 100% by slowly reducing the amount of mV being driven into the phone until it reaches a steady 2mV/4mV/6mV. This is better for overnight charging. Please research SBC since their are some risks.
Non-sbc is normal charging.
HAVS I believe controls how to voltages in your phone correspond to the amount of work your phone is putting in. Sorry if I CANT explain it any better.
A2SD: Very popular. A2SD is Apps 2 SDCard. Moving apps to the sdcard saves internal storage on your phone, but here's the thing, NOT all apps can be moved to the sdcard because of legacy apps and whatnot. Their are versions of A2SD that can be flashed which moved the apps to a sd-ext folder on a partition you create on your sdcard when prepping for this. You can also move the dalvik-cache to your sdcard also and both of these save a ton of internal storage.
That's for non-tech people? Really ??!
No offense but its full of technical buzzwords and concepts that the average user does not care about. All they want is -
- install this on your pc or phone
- click ok on the next 5 prompts
- you can now run tons of extra software and your phone is now amazing!!
That's it. Anything more is beyond the grasp of the average person, as it should be. Unfortunately rooting (on any platform) is still a pretty complicated process, so its better to read a lot and understand what's going on.
ECrispy said:
That's for non-tech people? Really ??!
No offense but its full of technical buzzwords and concepts that the average user does not care about. All they want is -
- install this on your pc or phone
- click ok on the next 5 prompts
- you can now run tons of extra software and your phone is now amazing!!
That's it. Anything more is beyond the grasp of the average person, as it should be. Unfortunately rooting (on any platform) is still a pretty complicated process, so its better to read a lot and understand what's going on.
Click to expand...
Click to collapse
Yea well this is true, but this is the easiest way I could break it down.
Don't get me wrong, its a very good writeup. But if you help your friends root their phones, you're going to be doing tech support. I know from personal experience
Tell me about it. I did my brothers and friends and they always need help with something.
Introduction:
Please read and try to do some research instead of bombarding the developers with the same questions over and over, cluttering the threads with useless and recursive information. I will try to include terms for all the ROMs and Kernels in the Development Section, and remove the obvious things as much as possible. That doesn’t mean it will be perfect! I hope this will be useful for beginners, because it provides most of the basic information you need to get started. From now on, it’s up to you what you do.
I am fully aware that the information included here is for one time use, enough to get you started. Some of these things ARE well known by many of you, but they are still useful for others that are just beginning to learn about their NS. Besides definitions and explanations, I’ll also link to useful posts around xda and other sites, which provide further information on the respective subject.
ROMs(ROM: a firmware that contains the Android operating system, and at least critical apps necessary for running your phone (but usually more apps than just those); can be stock or custom, and comes packaged in a *.zip file, flashable under recovery)
AOSP-built ROMs
Features: these are built from source code, from the Android Open Source Project, delivered free of bloatware and with rich customizations.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
CyanogenMod 9 (still in alpha stages for now)
IML74K Android 4.0.3 Build 4 - Quad Lockscreen + More MODS (1/15/12)
nuhetri- v1.0.0
Slim ICS
AOSP+ V2.3|ICS 4.0.3|Source Built|Status Bar Widgets + Nice Mods
4G VERSION
vhgomez36-ICS-NXS-4G-4.0.3 r2.0
IML74K Android 4.0.3 Build 3 - Quad Lockscreen+More MODS
Crossbones v0.1.3
CyanogenMod 9 v4.0.3 - Alpha 20
Click to expand...
Click to collapse
Moddified ROMs
Features: these are modified versions of stock/AOSP ROMs/other custom ROMs, that keep the look of the base ROM up to a certain point. Also generally free of bloatware and with some additional modifications.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
CyberGR-MOD|NS.NGN ver. 4.0 Ultimate
NSCollab 1.0.60
Ultimate ICS v4.0
-=Nexus MV 1.12.09=-
KANGY6 | ICS | AOKP |
NexusBeam 4.2.3
CyberGR-MOD|NS.NGN ver. 3.0 Hybrid ICS
Click to expand...
Click to collapse
MIUI-style ROMs
Features: unique type of ROM, developed by the Chinese. Has a strong iOS feel, highly customizable.
Some of the most popular (at the moment):
GSM VERSION: i9023/i9020A/i9020T
◄ ▌ [09.Jan.12] [ROM] Brainmaster's MIUI 2.1.6 ICS | Stable 2.3.7b v2 GB ▌►
DianXin OS (DX ROM) ICS | GB ROM
4G VERSION
◄ ▌ [28.Nov.11] [ROM] brainmaster's MIUI NS4G 1.11.25 | OTA ▌►
Click to expand...
Click to collapse
Stock ROM
Official releases from Google. The reasons most people here flash a stock ROM are: they want to update/ are bored of custom ROMs/ want to start over with their phone/ warranty reasons.
If you want to go back to stock for some reason, check this thread and read carefully, so you get the correct version for you.
Click to expand...
Click to collapse
Once we decide for a type or ROM (except stock), we head over to the ROMs thread and begin reading the list of features. Now would be a good time to PANIC! No, no, just kidding Those words do exist in some kind of language (not necessarily English). So here’s a very basic list of the most common terms found in our ROM threads:
Code:
[B]AOSP[/B]
[quote]Short for [url=http://source.android.com/]Android Open Source Project[/url]. Its purpose is to maintain the development
of the Android platform. Anyone can use the Android source code for
any purpose, and this is when custom ROMs come in. The [AOSP]
tag is used here to signal a ROM built from Google’s source, a pure
ROM, free of bloatware, with very good performance (generally)
and a very extended degree of customization. [/quote]
[B]Build.prop[/B]
[quote]This file is located in /system/build.prop. It holds the majority
of the runtime flags that are used when Android boots. Basically, it
lists specific information about your device, for applications to use.
You can also edit lines, with a file manager that has access to
/system, in order to change LCD density, build number, device
model and many more. [/quote]
[B]Busybox(ed)[/B]
[quote]Busybox is a collection of simple, but powerful Linux
utilities, that Android doesn't come with by default. It is used
by applications like MetaMorph and Titanium backup in order
to do special operations. You can manage ther version installed
on your phone with various apps from the [url=https://market.android.com/search?q=busybox&c=apps]market[/url] [/quote]
[B]/boot partition[/B]
[quote]This partition includes the bootloader and kernel, and
it enables the phone to boot. Wiping it must be done only if
requested, and the phone must not be rebooted after this operation.
Instalation of a new one is done by flashing a ROM that includes
the /boot partition. [/quote]
[B]/cache partition[/B]
[quote]Inside this partition, Android stores frequently accessed
data and app components. Performing a wipe of the /cache does
not affect personal settings or files, but simply gets rid of existing
data there, which gets automatically rebuilt in time. [/quote]
[B]Dalvik cache[/B]
[quote]Dalvik cache collects the information about the installed
applications and frameworks, and organizes them into a writeable
cache. Under this writeable cache, it stores the “optimized”
bytecode of the applications which is used by the applications
themselves later for a smoother operation. This dalvik cache can
grow as more applications are installed on your phone. It is safe
to wipe dalvik-cache. It will be rebuilt again when the phone
boots. This also explains why your phone takes ages to start up
for the first time. [/quote]
[B]/data partition[/B]
[quote]Also called userdata, the data partition contains the user’s
data – this is where your contacts, messages, settings and apps
that you have installed go. Wiping this partition essentially performs
a factory reset on your device, restoring it to the way it was
when you first booted it, or the way it was after the last official
or custom ROM installation. When you perform a wipe data/factory
reset from recovery, it is this partition that you are wiping. [/quote]
[B]Deodex(ed)[/B]
[quote]In Android file system, applications come in packages with
the extension .apk. These application packages, or APKs contain
certain .odex files whose supposed function is to save space.
These ‘odex’ files are actually collections of parts of an application
that are optimized before booting. Doing so speeds up the boot
process, as it preloads part of an application. Deodexing is basically
repackaging of these APKs in a certain way, such that they are
reassembled into classes.dex files. By doing that, all pieces of an
application package are put together back in one place, thus
eliminating the worry of a modified APK conflicting with some
separate odexed parts. The advantage of deodexing is in modification possibilities. On the other hand, since the .odex files were supposed
to quickly build the dalvik cache, removing them would mean
longer initial boot times. However, this is true only for the first
ever boot after deodexing, since the cache would still get built
over time as applications are used. [/quote]
[B]EFS folder[/B]
[quote]This is a VERY important folder. It contains phone-specific
information, like IMEI (encrypted in the nv_data.bin), wireless
devices MAC addresses, product code (also in the nv_data.bin)
and more. I advise you to make a backup of this folder, and keep
it safe. Remember, backup BEFORE flashing anything. Use [url=http://forum.xda-developers.com/showthread.php?t=1138873]this tool from forum member Borky_16[/url]. [/quote]
[B]Init.d[/B]
[quote]Init.d is very useful because it runs scripts that you can
just delete or replace in the /system/etc/init.d folder. The scripts
are also very flexible and can be used to call other scripts or set
a variety of system settings. [/quote]
[B]G-apps/Gapps[/B]
[quote]A long time ago, in a galaxy far far away, there was a
developer. And he used the Force for developing something called
CyanogenMod. For the happiness of the other folks in the galaxy,
he included some applications from Google. But the Emperor…
oh, sorry… But Google didn’t agree with him including these
proprietary apps, so they sent him a cease and desist letter.
Long story short, the Google Applications are provided separately
via a flashable .zip file. This is the case for pure AOSP ROMs,
and theoretically this is how it should be done. Theoretically. [/quote]
[B]Host File[/B]
[quote]Located in the /etc/ folder, it is used to block ads.
Most ROMs come with a “blocks ~95% of ads” statement. You
can also manage it with apps from the [url=https://market.android.com/search?q=ad+block&c=apps]market[/url]. [/quote]
[B]Logcat[/B]
[quote]The Android logging system provides a mechanism for
collecting and viewing system debug output. Logs from various
applications and portions of the system are collected in a series
of circular buffers, which then can be viewed and filtered by
the logcat command. You can use logcat from an ADB shell to view
the log messages.[/quote]
[B]NANDroid[/B]
[quote]When you take NANDroid backup, it means you are
backing up entire ROM. It’s basically a picture of the ROMs’
state . So when something goes wrong, you have the
chance to restore your phone to the backup state using the NANDroid. [/quote]
[B]NSTools[/B]
[quote]An essential tool that manages tweaks like BLN,
BLD, BLX, Liveoc, OC, CPU Governor, Deep idle and so on.
Written by arifhn, available in the [url=https://market.android.com/details?id=mobi.cyann.nstools&feature=search_result#?t=W251bGwsMSwyLDEsIm1vYmkuY3lhbm4ubnN0b29scyJd]market[/url] and on [url=http://forum.xda-developers.com/showthread.php?t=1333696]xda[/url],
this is a must have application for managing these various options. [/quote]
[B]Odex[/B]
[quote]These ‘odex’ files are actually collections of parts
of an application that are optimized before booting. Also explained at deodex(ed). [/quote]
[B]Power Menu[/B]
[quote]A multiple choice menu that appears when long pressing
the power button. In stock, these are critical options,
such as powering down the device. Developers have also
added options for taking snapshots,
rebooting normally/into bootloader/into recovery and so on. [/quote]
[B]Radio[/B]
[quote]The radio controls basic low-level functions like
network connectivity, Wi-Fi, and GPS. It comes as a radio.img file,
and generally, developers try to leave this out of their
ROMs because different areas require different radios. Pay attention
to this when choosing to flash a new ROM. There is a reference
thread with all the radios [url=http://forum.xda-developers.com/showthread.php?t=1116884]HERE[/url]. [/quote]
[B]Ramdisk[/B]
[quote]Ramdisk.img is a small partition image that is mounted
read-only by the kernel at boot time. It only contains /init
and a few config files. It is used to start init, which will
mount the rest of the system images properly and run the
init procedure. A Ramdisk is a standard Linux feature. [/quote]
[B]Recovery[/B]
[quote]Recovery mode in Android provides an environment for
users to wipe cache, data, factory reset the phone or update
it with a .zip file. There are custom recoveries like [url=http://www.clockworkmod.com/rommanager]ClockworkMod[/url] or [url=http://forum.xda-developers.com/showthread.php?t=1399565]TWRP[/url], which provide additional functionality,
and are very popular for this reason. [/quote]
[B]RTL[/B]
[quote]Short for Right-to-Left and refers to support for languages requiring this type of writing. [/quote]
[B]SetCPU[/B]
[quote]An application built by coolbho3000, which allows CPU speed tweaking and management, allows overclocking, and sets CPU governors. Available on [url=http://forum.xda-developers.com/showthread.php?t=505419]xda[/url] and the [url=https://market.android.com/details?id=com.mhuang.overclocking&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5taHVhbmcub3ZlcmNsb2NraW5nIl0.]market[/url] (try to buy from the market if you want to support his work). [/quote]
[B]SIM Toolkit (STK)[/B]
[quote]Now if you live in the States, you might not even know what
the STK is, so a bit of explaining is in order. Put simply, the STK
allows carriers to load a simple set of menus and 'applications' on
your SIM card. Earlier versions of Android, up to 1.6, actually
included a rather rough, but functional Sim Toolkit application, but
at some point it was dropped. [/quote]
[B]/system Partition[/B]
[quote]This partition basically contains the entire operating system,
except the kernel and the bootloader. This includes the Android
user interface as well as all the system applications that come
pre-installed on the device. Wiping this partition will remove Android
from the device without rendering it unbootable, and you will
still be able to put the phone into recovery or bootloader mode
to install a new ROM. [/quote]
[B]Unsecured Boot.img[/B]
[quote]Used for adb remount, gets you root by default on a shell. (ro.secure=0) [/quote]
[B]V6 Supercharger Script[/B]
[quote]A more technical explanation could be done here, but
the bottom line is that this is used to make your phone run
faster, by better management of memory. [/quote]
[B]Zipaling[/B]
[quote]Zipalign is an archive alignment tool introduced first
time with 1.6 Android SDK (software development kit). It
optimizes the way an Android application package (APK) is
packaged. Doing so enables the Android operating system to
interact with the application more efficiently, and hence has
the potential to make the application and overall the whole
system much faster. Execution time is minimized for zipaligned
applications, resulting is lesser amount of RAM consumption
when running the APK. [/quote]
Kernels
(Kernel: provides the most basic level of control over all of the phone's hardware; consider them a link between the hardware components and the ROM)
With kernels it’s a little bit easier. At least this is how it may seem. Right after rooting the device, many choose to first flash a kernel (including me) mostly because it gives the opportunity to flash something while not modifying the appearance of the phone. Furthermore, it gives you the ability to change things like CPU clock speed, internal and ARM voltages, and also have different patches and mods designed to prolong battery life/improve speed/provide stability.
Kernels are abundant for the NS, so I’ll be naming the most popular:
GLaDOS
ICUP Kernel Edition
*Matr1x*
SG-NS-ICS - 14-01-2012 - 11UV|Voodoo|BFQ|BIGMEM|BLN|BLD|BLX|TW|Lazy|3.0.15
Netarchy Nexus
NS+4G Trinity (E)UV and OC CM9 + m(any) roms
Click to expand...
Click to collapse
Many users ask around about which could be the best kernel. For this, xda member bedalus decided to set up a thread where he benchmarked ICS kernels (accurately enough). This should give you an idea where to start from.
Also, there are terms which appear frequently in the features list of kernels, so here’s a very basic list of the most common terms found in our kernel threads:
Code:
[B]BFS[/B]
[quote]A Brain F**ked Scheduler will perform better on CPU intensive
process, which usually cause them to get higher benchmark scores.
However because it only dedicates minimal CPU to background
processes you may experience lag when switching quickly between
different tasks. [/quote]
[B]BLD[/B]
[quote]Backlight Dimmer provides an option for the lights of the
touchkeys to be turned off after a certain period. This can be
tweaked from NStools. [/quote]
[B]BLN[/B]
[quote]Backlight Notification is a mod developed by neldar,
which converts the touchkey backlights into a notification led. [/quote]
[B]BLX[/B]
[quote]Battery Life eXtender, from Ezekeel, manages the maximum
percentage to which the battery is being charged. By default,
the Nexus S is charged to about 95% capacity. [/quote]
[B]CFS[/B]
[quote]A Completely Fair Scheduler is more suited for multitasking.
You may notice performance issues when using CPU heavy
activities like HD games because it is trying to keep the other
processes in the background equal to the one that is hogging the
CPU. It should also be noted that, as designed, this type of
kernel should handle going from listening to music to sending a
text to surfing the web with minimal lag. [/quote]
[B]Deep IDLE[/B]
[quote]Another mod by Ezekeel, which allows the phone to
enter a “deep idle” state while performing tasks when the screen is
off. For example, listening to music with the screen off and
Deep Idle turned on, you should get better battery life than
without Deep Idle. [/quote]
[B]Governors [/B]
[quote]There is a much to be said here, and this would stretch
this dictionary too much. I recommend reading [url=https://github.com/CyanogenMod/cm-kernel/blob/android-msm-2.6.37/Documentation/cpu-freq/governors.txt]THIS[/url], a very good explanation of
governors—from CyanogenMod. [/quote]
[B]OC (Overclock)[/B]
[quote]An overclock is usually one of the first things users
figure out after gaining root access on a new phone. If you
want to push your smartphone's CPU to run more clock cycles,
you have to know that extra power isn't coming from nowhere.
However, it is generally considered good practice, but it
depends on your handset. Some phones may be able to support
overclocking to 1.4 GHz, while others may never get past
1.2 GHz. Just proceed with caution. [/quote]
[B]Touch Wake[/B]
[quote]Yes, yes, Ezekeel again. This mod allows the user to
wake the device after a set amount of time, just by touching
the screen or the capacitive buttons. The time after which the
screen no longer responds to a touch is set with NStools. [/quote]
[B]UV (Undervolt)[/B]
[quote]This refers to lowering the voltage to conserve power while
still achieving the same performance, assuming your settings
remain stable. Both SetCPU and NStools allow the user to change
voltages. Like overclocking, this is also a trial and error process,
because each phone is different. The benefits are low energy
consumption and less thermal output. [/quote]
Tools & Mods
So you have a rooted phone. Maybe even a custom Kernel or ROM, whatever works for you. But you still want to be a tad different from the other guys using the same configuration as yours. So here's a small selection of mods and apps developed by members of the community, enough to get you started. Feel free to experiment, and remember: read before flashing, search before asking and you should be alright!
Mods for AOSP+ Rom
[BOOTANIMATION] Plain, Simple & Colorful + color variants
Nova Launcher
Flavours for stock OTA ICS 4.0.3
Search key to ICS recent apps [add CM9 version]
[NS][NS4G]FaceLock for ICS 4.0.3
Enable on-screen buttons in ICS roms
Click to expand...
Click to collapse
NOTES:
I am hoping this little survival guide is useful FOR BEGINNERS in understanding the basic terminology used here in the Nexus S sections. As the title suggests, it was made with beginners in mind, so I don’t want posts of so called “experts” saying how they already knew this.
IMPORTANT: I do NOT guarantee the explanations written here are completely accurate or complete, FOR NOW. I will keep working on this, correcting mistakes as I continue to read.
If you find something that you think is not correct, or consider something must be added, please post here, together with a link to a credible source.
All of this came from sources off the internet, so please bear with me. Also, sorry for any typing mistakes. If you see any, please be sure to signal them
If I have helped you in any way, or if you appreciate the work invested in this (now and for the future), press the THANKS button.
Thank you! (Hoping to see this stick) And many thanks to all the great devs working on ROMs and Kernels for us. Keep up the great work!
W O R K - I N - P R O G R E S S
(I will be sure to notify you when I believe this is complete)
Wow this is a very good idea. Thanks!
Sent from my Nexus S using Tapatalk
ljordan2 said:
Wow this is a very good idea. Thanks!
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Thank you! I'm just worried it is a little bit long... but in the next couple of days I will be making it more reader friendly
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.
nice thread! thanks
Hey great post, i still haven't rooted my nexus s but you just made me flash a kernal. I was tkinking about it but never too serious.
thanks!
Love it!!! Cleared so much up (you recieved my first Thanks button click!)
Just wanted to clarify something about the Kernel. My Rom is stock 2.3.6 that was received OTA when I unboxed the phone (Nexus S GSM i9020A, I'm in Canada). The bootloader is unlocked, phone rooted with CWM recovery via one click (QBKing's Video). Am I able to flash a custom Kernel to a stock Rom? Reading the above seems to lean towards the "yes", but wanted to make sure first.
Also, do not use the one click method on the Nexus S GSM if you want to easily return to stock. The one click stock only supports the 4G, which is extremely silly and inconvenient IMO. I'm currently still trying to figure out how to return to stock, incase something does happen and the phone needs warranty work. Let's just say, I'm not making much progress and this is extremely uncomfortable ATM..
Great thread and idea, all seems spot on. I vote for sticky.
Also, heX, you can flash a custom kernel on a stock rom as long as you have an unlocked bootloader and custom recovery. I'd recommend you backup all you need with TB or similar, then do unlock your bootloader if you havn't already (search around for how to do this, described in rooting guides). Just remember this will delete -ALL- user data, including sdcard. After this you can flash a su.zip to have proper root access, and you can easily install a stock image with a custom bootloader then lock the bootloader afterward for pure stocky goodness.
Thanks so much for taking the time to do this
Sent from my Nexus S using XDA App
Harbb said:
Great thread and idea, all seems spot on. I vote for sticky.
Also, heX, you can flash a custom kernel on a stock rom as long as you have an unlocked bootloader and custom recovery. I'd recommend you backup all you need with TB or similar, then do unlock your bootloader if you havn't already (search around for how to do this, described in rooting guides). Just remember this will delete -ALL- user data, including sdcard. After this you can flash a su.zip to have proper root access, and you can easily install a stock image with a custom bootloader then lock the bootloader afterward for pure stocky goodness.
Click to expand...
Click to collapse
TYVM Harbb!
Yes, currently the bootloader is unlocked, phone rooted and CWM installed. I did a TB backup prior so I could quickly restore my apps and settings. All is running well.
I tried to flash a full stock Rom back to the phone, but have run into an issue in doing so, posted here
I'm still awaiting some help with regards to that one, hopefully all will be well soon.
I'm not sure why I got spooked in doing this. I'd like to try the Matrix kernel and there are various Roms that definitely sound fantastic, but part of me just wants it back to stock so warranty and OTA are restored as the phone is only a few weeks old.
very useful for us newbie, thanks for sharing
heX79 said:
TYVM Harbb!
Yes, currently the bootloader is unlocked, phone rooted and CWM installed. I did a TB backup prior so I could quickly restore my apps and settings. All is running well.
I tried to flash a full stock Rom back to the phone, but have run into an issue in doing so, posted here
I'm still awaiting some help with regards to that one, hopefully all will be well soon.
I'm not sure why I got spooked in doing this. I'd like to try the Matrix kernel and there are various Roms that definitely sound fantastic, but part of me just wants it back to stock so warranty and OTA are restored as the phone is only a few weeks old.
Click to expand...
Click to collapse
Ok I see you have the att version, so i9020A. When android 4.0.3 came out, I wanted to go back to stock 2.3.6 so that I could update officially. Anyway, I downloaded a full stock ROM, flashable via recovery, from HERE and all went smooth for me. (the link is to the i9020A version, of course I used the i9023 version). Try the stock posted there, and see if you get any error. I think you should be ok now, if not, post back. Remember, this takes you fully back to stock, no cwm, no nothing custom.
I am glad to see that I helped somenone, I will make some modifications this afternoon, still 9am here (maybe add stuff to the dictionary and post it to google docs or something like that, just to make it easier to scroll through and more). Any suggestions or critics are welcome!
EDIT: Guide updated:
-better arrangement of the dictionary (will be adding new terms tomorrow, had to study for an exam today)
-added Tools & Mods section (will build on that later on)
-more to come...
great post OP
Nice thread! Great Work ,Thanks
Hey thanks! Happy to see good feedback on this.
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.
Great beginners guide, and thanks for the link!
For kernel benchmarks and more, see here: http://goo.gl/mpeHI
Thanks very much! I will give it a try shortly, just to confirm if I recieve any issues. I've also installed the recommended CWM version for my model, not sure if it makes a difference, but I flashed 5.0.2.0 anyway as the version I was getting an error with had a higher build number.
Right now I'm enjoying AndroidME 1.2.3 with Speedy 6 kernel and have no complaints so far! (Kernel updated this morning from Speedy 5)
I will report back with any issues once I have some time to do a Nandroid backup and test the stock Rom.
Thanks for your help!
It's nice to know there's a way to revert back to stock, should anything need servicing! I've also started reading up on Odin
flodb113 said:
Ok I see you have the att version, so i9020A. When android 4.0.3 came out, I wanted to go back to stock 2.3.6 so that I could update officially. Anyway, I downloaded a full stock ROM, flashable via recovery, from HERE and all went smooth for me. (the link is to the i9020A version, of course I used the i9023 version). Try the stock posted there, and see if you get any error. I think you should be ok now, if not, post back. Remember, this takes you fully back to stock, no cwm, no nothing custom.
I am glad to see that I helped somenone, I will make some modifications this afternoon, still 9am here (maybe add stuff to the dictionary and post it to google docs or something like that, just to make it easier to scroll through and more). Any suggestions or critics are welcome!
EDIT: Guide updated:
-better arrangement of the dictionary (will be adding new terms tomorrow, had to study for an exam today)
-added Tools & Mods section (will build on that later on)
-more to come...
Click to expand...
Click to collapse
You're welcome! Looking forward to an update with your stock flashing situation. I also used ClockworkMod 5.0.2.0 a long time. I'm now on 5.0.2.3 only for the better menu layout.
Transmitted from somewhere in space... from my Nexus S... and Tapatalk.
just one question...
can i install more than one kernel at a time...
for eg.like one i installed for battery usage and othr for sound..
can i do tht
Note from the Author -
I am moving on to the N5 now and ditching my S3. I will continue to maintain this thread, however - please do PM me if you think that something needs to be changed or updated in this thread as I doubt I will be answering questions within the thread as much. Please don't PM support questions to me. Only PM updates that need to be made in the thread.
It's been a blast!
Regards
Dan
efs | backup your efs | backup your efs | backup your efs | backup your efs | backup your
Understanding the basics before rooting your S3 (GT-i9300/i9305)
This thread is intended to give you (as someone considering rooting your device) an overview of some of what I deem to be, really important information. Many people blindly follow guides and end up in trouble because they break their phones and don't really know what they were even doing at the time.
This may seem a bit overwhelming at first, there is a lot of text, but please do take the time to read it. It may save you further down the line.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before we get started...
Here are a couple of threads you should get familiar with before posting on XDA.
Forum Rules - use Search before posting
Post Questions or Support queries in Q&A, NOT General
What is root access?
"root" is (but not exclusively) a Linux term. As you may or may not know, Android is based on a Linux Kernel.
The term "root" refers to the root of the device. All devices with an operating system use a series of directories (or folders) nested within one another. If you think of windows, your documents folder would be C:\users\username\documents.. Well, "documents" is a directory. It is within another directory (username).
Imagine "documents" being the top of a tree (A folder tree). You climb down the tree to username, past there to "users" and down to the root, in this example "c:". You cannot go beyond this level, because nothing exists beyond the root. To save a file directly on C: (not within any folders) would be to save a file to the root of your c: drive.
In Linux (unlike Windows), these root locations are completely locked down. A user of normal priviledges cannot edit any file or create files in these locations. They can only do this in their "home" location, which is the equivelant of username on windows. To gain access to these locations, you would need to be an administrator of the machine. Linux calls this Super User (su), and this user is said to have "root access".
This applies to Android in the same way. To root your Android device, is to have superuser access to the root locations of your phone, that you normally could not have access to.
Is it Risky?
There is always a risk having access to locations on your phone that are supposed to be locked down. You can easily delete things that your phone needs to boot up, which could lead to you losing all your data or even breaking your phone. This is why it is good have an understanding of your device and root access BEFORE you root.
It is worth noting that although many say rooting shouldn't void your warranty (it does in many places) even where that is supposed to be true, in practice, it isn't really. Even in the EU, I've seen many warranty claims rejected due to root so do think of your phone as out of warranty when you root.
The advantages of rooting
Why root?
More control over how the CPU acts. This can increase performance or battery life
More control over power consumption (undervolting)
More control over how apps start up. Prevent apps from starting up when they don't need to
Baseband. Try different basebands with the possibility of reducing drain or imporving signal strength
De-bloat. Remove or freeze system apps that you don't use
Access to community driven bug fixes that Samsung haven't released
Custom ROMs. Add additional functionality and controls over and above the stock experience
Increase redundancy. The ability to backup apps and entire phone
Theme. Don't be stuck with Samsung driving aesthetics.
Innovations. Use community driven features that improve your day to day experience
Better RAM management. Change the values of "Out of memory". Decide yourself when android should kill unused apps. Increase mutlitasking capabilities
Custom kernels. With kernels you can bring support for better audio features, better graphics performance and support for stock unsupported files systems
Google Android. Use android as it was intended before Samsung got their hands on it.
The Disadvantages of rooting
Why not root?
For all intents and purposes, rooting voids warranty.
Dangerous. You can break your phone and need the warranty you probably just voided
You open the doors for more mistakes. These mistakes may cause you to panic and further damage your phone
Lack of understanding. Blindly following guides and not understanding what you're doing.
No more official updates. Updating is a more manual process
Basic layout of /root on the GT-i9300
I'm not going to go into too much detail here. I just need you to know the basics. The GT-i9300 has an embedded Multi Media Card. This is the internal memory that everything on your phone you need to run it, is insalled on. It is the "internal memory" of the device.
Like windows and linux, there is a root to this memory, which has a few basic partitions that you need to know.
/efs - This is REALLY important. This is where your IMEI is stored, which you need to connect to your provider's network. Unfortunately it is the easiest partition to corrupt and impossible to restore without a backup so ensure you have a recovery or application to backup your efs cause if it goes (likely) you'll be sending your S3 to Samsung for repair.
Please read THIS THREAD for more info on EFS and IMEI issues.
/system - This is where the ROM is installed. Within /system are many important folders that you normally cannot get to.
For example, you have /system/app where all the important ROM apps are located. Things like the phone app and the messaging app. /system/bin, where all the important binaries are located that allow android to execute commands that it needs to, so it can function as an OS and /system/framework, where the crucial policies that control how things the user and processes interact with - act.
/data - This is where apps you install are kept. This is also where your data is kept, eg your SMS and e-mails. It also stores settings. If you change the wallpaper, it is stored here. What ringtone you have chosen... etc. The important directories here are /data/app and /data/data. These are what get wiped when you choose to wipe data\factory reset
/data/media is an important directory in /data. This is what is known as your "internal storage" or your "internal sdcard". /sdcard maps to here.
When you have root access to android, you can browse these partitions with a root explorer / file manager with root functionality.
There are also some hidden partitions you cannot browse like this. These are the partitions that contain recovery, bootloader and kernel
What are those things?
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.
Please note, unlike the Galaxy S2 (and like almost every other modern android device) the kernel and recovery are independent. There is no link between recovery and kernel. Kernels are boot.img files.
Bootloader - this is what handles what you boot into. When you see the black Galaxy s III text, thats the bootloader. Its job is to handle the boot. It is responsible for booting into android, or if you manipulate the buttons in a certain way, it will boot into recovery or download mode. PLEASE NOTE, i9300/5 Bootloader is NOT LOCKED. DO NOT TRY TO UNLOCK IT. Only some US variants have a locked bootloader...
When you see this screen, you're looking at the bootloader:
Download mode is part of the bootloader itself. Again, it is a mini OS. It is designed for flashing stock (official) ROMs onto the phone (Which you can do using Odin). It is also used by Samsung to detect the status of your phone (if you have modified it or not).
If you have (or had before rooting) an official ROM above 4.1.1, Your bootloader flash counter in download mode will change to "1" at every boot, if you have a custom kernel or recovery - even if you reset it with Triangle Away. See the return for warranty link later in this post to get around this.
To access download mode, turn off your phone. Home volume down + home then press power. You will get to the screen below:
Press volume up to continue into Download mode:
Recovery - a secondary, min operating system designed to offer a few "drastic" options to recover when you cannot boot into android. For example, factory reset. Recovery isn't part of android. It is a seperate operting system. You can either boot into android or boot into reocvery.
To access recovery (custom or stock), turn of you phone. Hold volume up + home then press power.
The intial use of Stock recovery was to allow a user whose phone does not boot, to wipe their device to "recover" it to a booting state. It could also flash official updates from the sdcard. Custom recoveries do so much more, such as allowing you to flash custom rom.zip or kernel.zips from sdcard or backing up your device with a nandroid recovery.
Here is an example of a custom recovery (Philx Touch 5):
Please note, unlike the Galaxy S2 (and like almost every other modern android device) the kernel and recovery are independent. There is no link between recovery and kernel.
Some other stuff you may have heard about
Baseband / Modem / Radio - This is the software that manages your connection to wireless networks, be that voice or data. Unlike unrooted users, you can download and flash any number of i9300 (Versions for other models WILL BRICK YOUR PHONE) or i9305 radios pulled from official ROMs. I wouldn't waste too much time on them. Usually what your official ROM comes with in your country / for your carrier, is the most optimised for you. Try a few by all means but don't waste time testing every last one.
Be aware that Samsung official ROMs come with a baseband. Often this means Samsung based custom ROMs may also do so. Some ROMs which install using the Aroma installer (A kind of set-up wizard) may give the option to not flash the baseband. AOSP ROMs almost never come with a baseband. When you flash a ROM withotu a baseband, the previous baseband remains. You can by all means, mix and match ROMs and basebands. You are not tied to the baseband with the same build number as the ROM. For example, if you are on XXEMB1 ROM, you definitely do NOT have to stay on the XXEMB1 baseband.
RIL - RIL is Radio Interface layer. It's what sits between the radio (above) and the android telephony services. Each Radio is supposed to have a specific RIL. Every ROM comes with RIL as it's a requirement to function. Again, although the best pair is a matched RIL and Radio version, if you do change your Radio, it's not the end of the world. You may notice a little difference flashing the right one, but it's not something to get bogged down with. Personally, I very rarely try a new Radio. I almost never change my RIL.
It's worth mentioning that the above is only really valid for Touchwiz ROMs. AOSP ROMs use OpenRIL and are not compatible with Samsung RILs. Do not use apps like GetRIL or flash Modem+RIL packages on AOSP ROMs. You would have to reflash the ROM if you do this because using a Samsung RIL on your AOSP ROM will likely break your signal.
Also note, Nandroid backups generally don't backup the Radio. Some recoveries may give you a separate option to do so however. The RIL (as part of the ROM itself) is backed up in a Nandroid.
ROM - ROM really stands for "Read Only Memory" which refers to memory that cannot be overwritten. When we talk about an Android ROM, we are really talking about the Android OS which is installed ON the Read Only Memory, of course since rooting, the /system partition where the ROM is installed is no longer read only. It is read / write. Flashing a ROM will over write the entire /system partition with whatever is in the ROM.zip or ROM.tar. Any mods, scripts, themes or apps will be replaced. You can only have one ROM at a time, unless you use one of those funky dual boot kernels.
More advanced layout of the GT-i9300
Here we have a lovely MS paint diagram of the eMMC layout of the GT-i9300/5. Some of this you don't need to know, some of it you do.
1 BOTA0 - mmcblk0p1 - 4 MB
2 BOTA1 - mmcblk0p2 - 4 MB
3 EFS - mmcblk0p3 - 19.7M
4 PARAM - mmcblk0p4 - 8 MB
5 BOOT - mmcblk0p5 - 8 MB
6 RECOVERY - mmcblk0p6 - 8 MB
7 RADIO - mmcblk0p7 - 33 MB
8 CACHE - mmcblk0p8 - 1 GB
9 SYSTEM - mmcblk0p9 - 1.48 GB
10 HIDDEN - mmcblk0p10 - 587 MB
11 OTA - mmcblk0p11 - 8 MB
12 USERDATA - mmcblk0p12 - 11.4 GB
The above sizes are approximate and the diagram is not to scale.
Rooting the phone
When you go through the process of rooting the phone, you have to alter the ROM. Although the risks of this are very minimal, we couldn't technically say it was risk free. The process of rooting puts a binary (called "su") in /system/bin (remember we talked about that earlier?). This binary is what allows the user (you) to run things at an elevated privilidge (super user). That in itself would be quite risky, so rooting also gives you one of the superuser apps (there are 2 - SuperSU and SuperUser, both very good). These apps install to /system/app and act as a gateway. Essentially, these apps prompt you when another application wants "root access" so you can allow it or deny it. It's a form of protection against malicious intent.
Root is often enough for most people who simply want to run a few root apps, but many people will need to replace their stock recovery with a custom recovery. This is because you cannot flash custom roms from the stock recovery. Some methods of rooting give you root AND recovery. Some just give you root, but you can flash a recovery yourself using Odin and download mode. Technically you do not need root to flash a recovery and then flash a custom ROM as the rom will include /system/bin/su and /system/app/SuperSU anyway.
Odin is a useful Windows tool. You'll be using this to return your phone back to stock too by flashing a stock "firmware"
Please read Samsung Galaxy S3 General Sticky Roll-Up Thread ***Stickies found here!** to find all the rooting and flashing guides you need for the GT-i9300
If I were asked my opinion on how to root, I would recommend one of the 2 scenarios.
1) You want root only. No custom ROMs, kernels etc. Just root, just to use root apps.
CF Auto Root Via Odin
Why? Tried and tested method, simple to use. No need to choose what exploit you want to use as it's tailored for your device.
What does it do? It gives you a stock recovery (so can't flash things) and roots the Android OS
The Steps:
1) Download the Latest Odin
2) Download CF-Auto-Root for your model
3) Follow These steps to root
2) You want to flash custom ROMs / Kernels
If you want root on your existing Android ROM, you can do 1) first. Then flash a recovery of your choice (CWM, Philz, TWRP) via Odin
However, if you immediately plan on flashing a ROM, there's no need to root your existing ROM. Simply skip straight to installing a recovery. Backup then flash what you like.
The Steps:
1) Download the Latest Odin
2) Download recovery of your choice CWM, Philz, TWRP
3) Follow The steps to Flash Philz recovery (But for the recovery of your choice)
These steps can also be followed to update recovery to newer versions
Official Updates
Once you have rooted your phone, the phone is classed as "modified" and no longer qualifies for Official Samsung OTA updates.
It is possible to receive official updates (whilst rooted) via Kies, however this will remove root (just like flashing a full stock rom) and if you have any custom themes, kernels or /system modifications, this could really cause some problems to the ROM so it is best to avoid. Of course if you have flashed a custom ROM (even TouchWiz based ones) Official updates are a big, fat No-No.
If you do run custom ROMs, it's best to use their OTA method if they have one, or download from the threads on XDA and flash via recovery.
Flashing - Good practice
Recovery - Custom recoveries are very handy tools. Unlike the stock recovery, they have lots of options. Not only do they allow you to flash custom ROMs, but you can backup your current ROM too. This is called a Nandroid backup. Its a snapshot in time. It backs up your entire device, from the ROM to the Kernel and all your data too. If you restore a nandroid backup, your device will be extactly the same as it was when you took the backup. This means if you took a backup 2 weeks ago and restored it today, you could have lost 2 weeks worth of SMS.. but it is very handy. As soon as you have a custom recovery, a Nandroid backup should be the FIRST thing you do. You should take one before you flash any Mod, kernel, ROM or theme. It really is important, incase you manage to break your device.,
The RIGHT files - Always be careful that you know what you're flashing is for your device and you know what it is. Flashing files (ROMs, kernels etc) for other devices could BRICK your phone. Bricking means that it is beyond normal levels of repair, often meaning it needs the internal memory (which equates to the motherboard) being replaced. very expensive.
NEVER remove power - When flashing something, be it from your computer or from recovery (or mobile Odin), do NOT remove the power. It can corrupt not only what you're flashing but also what you're flashing to. If you corrupt any of your eMMC partitions, you could have Bricked the device.
Read, read and read - Read the development threads before you flash anything. Ensure you understand what you are flashing. Ensure you know the specific procedure layed out by the developer and you follow it closely. Do not ad lib. If you are unsure, ask.
DON'T PANIC - Think you've bricked your device? Dont panic. Stay calm. Dont google "unbrick S3" and flash lots of files you dont understand. There are many types of S3 "brick" (they're not bricks if you can easily recover) and many varients of the S3. Flashign these files could further break your phone and actually brick a not already bricked phone. Nothing for any other variant than the GT-i9300 should be flashed on it. The same goes for the i9305. Never flash for another model number.
Search and Ask - Unsure of something, read the stickies Samsung Galaxy S3 General Sticky Roll-Up Thread ***Stickies found here!** and do a search. Can't find your answer? Ask. It is easier for us to help you understand something before you do it than to fix something after you've broken it.
Provide details - ALWAYS tell us exactly what happened if you are requesting help. Always describe in detail what is happening.
"Flashed my phone now it doesn't work" is useless information.
"I rooted my phone 3 months ago and flashed a custom ROM. I decided today to flash ROM X from recovery Y. I booted into recovery and flashed from my internal SD card. I rebooted the phone and it is not starting up. It is looping at the boot animation" is GOOD information. We need to know What, when, how. We need to know if you followed a guide and which one (links where possible)
Backups
Backups are really important. This is how you can mitigate the risk of losing all your important data. Without these you could have to start again from scratch or worse, need to send your device for repair.
Your entire phone - Nandroid - Recovery
[*]efs - Recovery - EFS backup aapplications
[*]Your apps and data - Titanium backup
[*]SMS - SMS backup+
[*]Photos - Dropbox
[*]sdcards - FolderSync
The reason we backup is multifaceted.
A Nandroid will backup your entire phone. This is usually taken immediately before you flash a mod or a new ROM. Nandroid restores /system and /data. Usually when you flash a mod (kernel, theme, some system app or libs etc) and it causes a bootloop, a simple restore of Nandroid will return your phone as it was and booting again. In fact, you can use an advanced restore in recovery and choose ONLY to restore /system if appropriate
Titanium backup would often be done on a schedule. Every 2nd night or something, maybe once a week if you're daring. These are important for a number of reasons but the most important is if you are flashing a new ROM.
Remember earlier, we talked about all your data and apps being in /data/data and /data/app? Well, Titanium backs that up. When you flash a ROM, you have to perform a full wipe / factory reset before it will boot up properly. This is because you have settings stored in data/data for apps in /system/app that may have changed or no longer exist, or settings different to the settings in the new ROM. These are incompatibilities and these incompatibilities often will prevent a new ROM booting. Of course, a factory reset doesn't fully restore it to it's factory condition. It cannot restore the bootloader, rom, baseband etc because you overwrote these by flashing a new one.
We wipe, we install titanium and we restore all the data/apps and the /data/data related to /data/apps, but none of the data/data related to /system/apps (because that would restore the incompatibilities)
Here is how I restore using titanium backup after a wipe and flash....
Remember if your backup is on external sd, you need to point titanium to the location using preferences > backup folder location...
Go to backup / restore tab and press "click to edit filters" and deselect "system" and press the done tick icon to apply. Then from the previous backup / restore screen, go into the batch screen (another tick icon top right).
From this batch screen, select "restore missing apps with data" by pressing "run". Manually go through every app (yes, even if you have 300 apps) ensuring there's nothing samsung or rom specific there, unticking anything that is...
This should ensure a clean, user only app and settings. You will then need to manually set your system settings (ring tones, email etc)
Warranty
So, as we have discussed, warranty should be considered void once rooted. Technically in the EU, the OEM must prove root damaged your phone to reject warranty, however this is almost never the case.
When the S3 was released, it came with android 4.0.4 (ICS). The bootloader with ICS was normal. If you used Triangle Away once rooted, it would reset your binary counter forever. You may have kept status: Modified until you factory reset but that is not so much a problem.
When the S3 was upgraded to 4.1.1 Jelly Bean, a new bootloader was introduced. You could still reset with Triangle away, however on the next boot, if you had a custom recovery or kernel, the binary counter went back up to 1 again, which can present a problem.
Please see the following scenarios.
1) You just want root. No custom Kernels, no custom ROMs, no custom recoveries.
This is fine. If you root with CF-Auto Root it gives you a stock recovery. Once you reset the flash counter with triangle away, you should be fine.
2) You want root and recovery on a 4.1.1+ S3.
If you have a custom recovery or kernel, you can set triangle away to reset at every boot. The problem is if your phone breaks in such a way that you can never boot into android, but download and recovery mode still work, you're screwed, It goes back up to 1 on boot, fails to boot then you can only reset it with triangle away, which you can't use because it needs you to boot into Android. You see the risk?
3) You want root and recovery on a 4.1.1+ S3.
The alternative to the above is to flash This 4.0.4 bootloader via cwm. It can be reset by Triangle Away, and stays reset forever. Well why aren't we all using this? Because it is NOT SDS safe. This means if you ahev the unsafe internal memory, if you use download mode to flash anything, you risk bricking your device. Read [Important] Sudden Death Fix - Are you covered? for more information.
So it's a choice between:
I risk that under certain conditions, I may not be able to reset the binary counter for a warranty return
or
I have my binary counter at 0 always, but I cannot use download mode.
Please note, you need to run a TouchWiz ROM to use triangle away
Popular misconceptions
USB Debugging is always required for flashing.
Incorrect. USB debugging is an Android setting. It is only applicable within android. This setting does not work in recovery or download mode, so obviously anything done in those modes does not require USB debugging.
When rooting, all your data is lost.
Incorrect. Rooting adds a binary and application to your phone. It does not wipe it.
I need to root to fix my battery by wiping battery stats.
Incorrect. No one needs to wipe battery stats. Please read the wiping battery stats thread linked below:
Battery stats
What's good for you is good for me!
Incorrect. Everyone's usage is different. Everyone's set-up is different. Everyone's environment is different. There is no "Best" ROM. There is no "Best kernel for..." There is no "Most battery efficient baseband". All these things may acti differently for you than they will for me. What I like isn't what you like. Please do not create any "Best" threads.
If I ask the question "Blah blah blah for custom ROMS?", everyone will know what I am talking about
Incorrect. "Custom ROM" and "AOSP ROM" are NOT synonymous. People imagine when they ask about "Custom ROMS" that we know they really mean "AOSP ROMS". We don't. There are TouchwIz based custom ROMs too. We assume nothing.
B]I need yo be on a certain ROM to flash certain other ROMs[/b]
Incorrect. You're overwriting the ROM so why would ot matter what ROM you're overwriting?!
Important threads and resources
A list of important threads and resources...Please read ALL of these threads before rooting.
Mskip's unified toolbox(Root, drivers etc)
Index of Roms, recoveries and kernels
Guide for flashing roms, backups etc
Returning to stock for warranty
Odin flashing guide
Sammobile.com - stock firmwares
Be prepared ahead of time to fix a Brick
rootSU recommends
A few recommendations from me...
RootExplorer
Titanium Backup
Philz Recovery (CWM advanced)
Odin
Heimdall (Linux / Mac odin equivelant
That's it for now. I know this is a lot of information, but I believe this info to be the very least you should know before deciding to go ahead with rooting your S3. Please read it and read it again. Anything doesn't make sense, please ask in this thread and I will gladly help.
If any other seasoned rooters / flashers think there is something salient missing, please post her too. happy to add to it.
Glossary of terms
adb - Android Debug Bridge. This is a Windows or Linux command line tool that can be used to push files to a device, pull them, create directories. Very handy with a custom Kernel if you can't boot and need to get data from the device. This can be downloaded as part of the Android SDK or mskip's unified toolbox mentioned earlier.
AOSP - Android Open Source Project. This is google's code base. This is Android in it's pureset form. Anyone can download this code and build a ROM. It will take some work to build for a specific device however. Even Samsung start with this code at some point.
AOKP - Unofficial development team building ROMs based on AOSP accross a range of devices. AOKP stands for Android Open Kang Project. A play of the AOSP it is based on. Kang means to find / use (or even steal, although not in this case) source code.
baseband - The software responsible for controlling the radio hardware. Essential for network connectivity. Also referred to as "modem" or "radio"
bash - bash is a shell script language. Natively used in unix and linux, it can also be used within terminal emulators on android and scripts. Most mods that are scripts, use bash.
binary - a binary file is the opposite of a text file. It may contain data to be read by the OS rather than a human. It usually contains instructions on how a particular function should be handled.
binary counter - also referred to as flash counter. This is in part of the bootloader, viewed in download mode. The Binary counter increases as you flash non-stock (custom) recoveries and roms and kernels not "signed" by Samsung. The app, triangle away can help a little
boot.img - the kernel is contained within an .img file named boot.img. Not to be confised with sboot.img (bootloader)
bootloader - Bootloaders exist on almost any multi-OS bootable system. Windows has one, linux has one and android has one. It is how the device "decides" which OS to boot into. the user can manipulate hardware buttons during boot to alter which OS the bootloader boots into. It boots into Android by default but it can also boot into recovery or download mode. The bootloader is within an .img called sboot.img
brick - brick refers to a device that has been "bricked". A bricked device is beyond repair. In other words, your phone may as well be a brick, because it cant be a phone any more. A bricked device must be sent to the manufacturer / carrier / service centre for repair. You cannot repair a brick yourself. If you have something that can be repaired, it is not a true brick.
There are 2 types of brick referred to..
Soft brick, where the phone bootloops. These can sometimes be repaired, so for that reason it is not a true brick and I prefer to never use the term "Soft Brick".
Hard Brick. This is what I call a true brick. The phone cannot be repaired by a user. This of course does not extend to replacing parts. Sure, a brick can be replaced by replacing parts. It can't be fixed with external hardware or software however.
busybox - A set of tools to be added to android. Many root apps require busybox to run. It can be installed using an installer from the market. Similarly, most custom ROMs will contain busybox by default
clockwork mod - clockwork mod is a custom recovery
cfq - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
checksum - see md5 checksum
cm - abbreviation for cyanogen mod. See Cyanogen
CPU - central processing unit. This is the brains of the operation. the CPU is what translates all the instructions and processes them. This is the main "power" behind any device. The better the CPU, the faster these instructions can be processed
custom ROM - A Custom ROM can be based on Touchwiz (Samsung stock), or it can be built from AOSP code. It really just means "unofficial" and will usually contain tweaks, fixes and imporvements for your device. A Custom ROM is a complete android replacement.
cwm - abbreviation for (see) Clockwork Mod.
cyanogen - a team of developers spanning multiple devices. Probably the most famous of development teams releasing heavily modified AOSP based ROMs. If there's any AOSP ROM thread for any Android device forum, there will be credits to cyanogen in there.
dalvik-cache - Dalvik-cache is a way of optimising applications. Its a way of ensuring all the dependencies an app requires are "at hand" to speed up use. It is rebuilt at start up when wiped. A de-odexed system will have more dalvik-cache than an odexed one.
de-odex - The act of removing odex from a stock ROM. On Stock ROMs, instead of using a dalvik-cache for system apps, we use .odex files instead. Generally custom ROMs prefer de-odexed configurations as it's easier to wipe and maintain when you make changes to your system.
deadline - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
download mode - Samsung's own mode accessible via the bootloader. Hold Vul down, Home and power (from off) to boot here. Also referred to as "Odin Mode". This replaces the "fastboot mode" that most other devices have.
efs - Important partition / directory on the root of your phone. Ensures the IMEI number is present in the software. Back this up, because if it breaks, it's gone for ever. You need Samsung to repair.
eMMC - Embedded MultiMedia Card. This is like an SD card, but it's embedded in a device. the eMMC is a NAND flash memory chip which acts as internal memory (storage) on the S3.
exFAT - exFAT is a Microsoft proprietary (closed source) file system, used for media (sdcards, USB flash memory, HDD's etc). ExFAT is not natively supported in Linux and AOSP ROMs
ext - ext2, ext3 and ext4 are file systems created specifically for Linux. Our internal memory is ext (or "extended" as it is known). This can sometimes be used to refer to an ext partition, an old school method of partitioning your sdcard to link the internal ext partitions to to increase app space on low memory devices. Ext file systems cannot be read on Windows machines without special applications / drivers installed.
extSdCard - This is referring to the removable Micro SD card. Samsung ROMs mount the rremovable sd card in Android as /extSdCard. Recoveries such as CWM will mount it as external_sd. Both of these terms are valid, but it depends if the phone is booted to Android or Recovery. In AOSP ROMs, the removable SD card is often mounted as /sdcard1
FAT32 - another file system which is quite old now but still a good one. This is the only file system that is compatible with all devices unconditionally. The downfall is a maximum file size limit of 4 GB. Windows disk management GUI can only format up to 32 GB. Windows command lien tool "diskpart" can format up to the max volume size of 2 TB, as can many 3rd party tools such as easeus.
flash - Flash means a few things. It can refer to the fact that our internal memory is NAND Flash (Solid state) memory. It can also be the act of "flashing", or "to flash", meaning to install to flash memory. This doesn't really refer to installing an .apk. Rather, it refers to bigger, OS, System or device wide altering modifications (Kernels, recoveries, ROMs etc). Always back up before flashing.
Custom ROMS are usually flashed from your SDcard via recovery, as are kernels and basebands however, kernels and basebands usually can come in .tar format which means odin/mobile odin can flash them too from your computer/sdcard respectively. Rule of thumb, .zip from sdcard via recovery. .tar from sdcard via mobile odin or from computer using odin
flash counter - See binary counter
framework - The android frameworks are a standard structure within android that the OS is built around. It determines things like policy (how the OS should manage an event). It controls everything from notification behaviours to the theme. Anything visual within Android with exception to the notification area is controlled by framework-res-apk. AOSP and most manufactured ROMs only have 1 frsamework-res, however Samsugn Touchwiz ROMs alsu have a twframework-res.apk for Samsung only visuals.
gapps - Google Apps (gapps). AOSP ROMs like Cyanogen, have been asked by google to not include the google apps packages, which are proprietary to google (meaning not open source). This means that when you download these roms, you need to flash a gapps package separately. They are usually available as link in the ROM thread
governor - governors are included with kernels. I will not go into too much detail but essentially, the governor is a set of instructions which tell the kernel how to manage the CPU. It can control when the CPU ramps up or down, or how long it stays at a certain frequency. Most custom kernels come with a selection of governors to choose from using things like Set CPU. The governor settings for each can also be fine tuned or tweaked to y7our liking.
hotplug - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
jig - a small usb device that plugs into the USB port of the S3. Designed to provoke "bricked" S3's to boot to download mode in an attempt to help recovery the device.
kernel - The kernel, it is said - is the "beating heart" of Android (or any OS for that matter). It sit's between the application layer (Android, applications etc) and the Hardware (CPU, Memory) and handles all transactions between the physical and the virtual. It passes information and instructions inbetween and translates. Very important stuff!
lulzactive - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
md5 checksum - md5 checksum is a way to verify that a zip (or file) is not corrupt. A developer or uploader may provide a hexidecimal string called an md5 checksum. This checksum is a test done on the files that gives it a unique string based on it's contents. If you download the file and check the checksum and it does not match, it means the contents of the file have altered, usually meaning it is corrupt and shouldn't be flashed.
An md5 checksum is easy to check on android. My preferred method is using an android terminal emulator. Lets imaging I have a file on my external sd card called "rom.zip"...
In terminal emulator, type "md5 /mnt/extSdCard/rom.zip" and the terminal will give you an md5 string, If this matches the uploader's string, you're good to go.
If you're downloading something on Windows and then transferring it to your phone, it's a good idea to check md5 on both.
Linux is pretty much the same except the command is "md5sum"
For windows: http://www.winmd5.com/
modem - see baseband
NAND - NAND is a type of Flash memory. If anyone say's "NAND" to you, they are talking about the internal memory (Storage) of your device.
nandroid - nandroid refers to a backup taken or restored via custom recoveries. This is a universal term, although nowadays most recoveries simply say "backup" or "restore", but it is a nandroid backup they will be taking or restoring, which got it's name from the NAND flash memory that Android devices use internally. Nandroids are often only compatible with the variant of recovery you have. For example, a backup taken with CWM may not be compatible with TWRP, unless they introduce a compatibility setting in the future, which Philz recovery has done.
noop - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
oem - Original Equipment Manufacturer. The OEM ROM for us is teh one the Manufacturer (Samsung) shipped with the phone.
overclock - overclocking is to set the CPU clock speed (frequency) higher than intended by the manufacturer. For example, the S3 has a 1.4 GHz (1400 MHz) maximum clock speed. With the use of a custom kernel and an application such as Set CPU, you can set this higher, to 1.6GHz or maybe even higher.
The risk is that the higher clock speed uses more voltage and voltage = heat. A higher clock with higher heat can permanently damage the CPU. Overclocking is usually paired with undervolting for these reasons. Another risk is instability. Each individual CPU has different tolerances due to imperfections in the manufacturing process. My CPU may be stable at 1.6 GHz, yet yours may be stable at a higher or lower clock. The side effects you will see here will be random reboots when the phone is under load.
pegasusq - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
radio - see baseband
RAM - Random Access Memory. Great explanation here: http://www.androidcentral.com/ram-what-it-how-its-used-and-why-you-shouldnt-care
scheduler - built into kernels, there are schedulers to determine how CPU load is spread across different tasks. There are also read / write schedulers that spread out read and write operation priorities across the internal memory. Like Governors, there are different types of scheduler available.
sio - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
stock - Imagine your phone is on a shelf in a shop. The phone is "stock" of that shop. If anything is referred to as "stock", this means standard for the device / as it was when shipped / as per factory set up. It is the opposite of custom. Some people refer to AOSP ROMs as "Stock Android". This may be the case for some phones, like the Nexus devices, but generally this is incorrect. Stock is whatever the phone came with as standard.
triangle away - an application designed to reset the binary counter. Warning, newer bootloaders (4.1.1+) now re-increment the binary counter at boot, so some trickery is required to get the counter to remain 0. This can be troublesome if you need to return for warranty.
undervolt - to undervolt is to lower the voltage used, either by the CPU or the GPU. Kernels assign a static voltage to each clock speed. For example, 200 MHz = 900 mV, 300MHz = 925 mV. Undervolting is the process of lowering this voltage staticaly for each clock speed, which potentially will save battery, although many people think it wont have much affect. Beware, undervolting too much can cause instability. When a clock frequency hasn't got enough power to sustain, the device will likely reboot or power off.
vanilla - meaning plain. Often used to refer to the "pure" android. AOSP without OEM skins, UI's and Launchers etc. The people who incorrectly use "Stock" to describe AOSP, really mean vanilla.
zzmove - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
Every phone specific section needs something like this.
Very well done!:beer:
abaaaabbbb63 said:
Every phone specific section that can be rooted needs something like this.
Very well done!:beer:
Click to expand...
Click to collapse
Now you need the difficult part, people to actually read it.
Nice work @rootSU
Needs to be stickied and a humongous "READ ME" sticker attached! :thumbup::thumbup:
Edit........Reported©®™ so it gets stickied!
Its getting noobs to actually bother to read is the problem .
jje
True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta
Add backup EFS first ??
jje
Some of the stickies in the roll up thread are badly out of date, you also might want to link to Mike Skip's toolbox, which reduces the chances of bricking considerably.
rootSU said:
True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Seeing as this may well attract lots of attention, possibly add a reminder about reading the rules and link? I know it's not relevant particularly, but any chance to ram the message home is good :thumbup:
rootSU said:
True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Instead of [REF] you should write [BOOBS]. That would attract attention.
Added:
Link to forum rules and "post in Q&A" threads
Important links and resources
efs (in partitions)
backups
I'm sure there's still loads missing, I just can't think of much so all suggestions welcome.
Added "The advantages of rooting". Miss anything?
EDIT > added disadvantages too.
OP, I have moved your thread to the q&a section and stuck it. It is a great FAQ type thread and will serve a good purpose being stuck where people go to ask these types of questions. :good:
Towle
XDA Moderator
Towle said:
OP, I have moved your thread to the q&a section and stuck it. It is a great FAQ type thread and will serve a good purpose being stuck where people go to ask these types of questions. :good:
Towle
XDA Moderator
Click to expand...
Click to collapse
Thanks @Towle
Sent from my GT-I9300 using Tapatalk 4 Beta
I've updated the following to sections to read as below:
Bootloader - this is what handles what you boot into. When you see the black Galaxy s III text, thats the bootloader. Its job is to handle the boot. It is responsible for booting into android, or if you manipulate the buttons in a certain way, it will boot into recovery or download mode. PLEASE NOTE, i9300 Bootloader is NOT LOCKED. DO NOT TRY TO UNLOCK IT.
Download mode is part of the bootloader itself. Again, it is a mini OS. It is designed for flashing stock (official) ROMs onto the phone. It is also used by Samsung to detect the status of your phone (if you have modified it or not).
If you have an official ROM above 4.1.1, Your bootloader flash counter in download mode will change to "1" at every boot, if you have a custom kernel or recovery - even if you reset it with Triangle Away. See the return for warranty link later in this post to get around this.
oops
first i thought it was typo but after i check out dictionary i just learn a new and rare word ... teh ....:fingers-crossed:
qtwrk said:
oops
first i thought it was typo but after i check out dictionary i just learn a new and rare word ... teh ....:fingers-crossed:
Click to expand...
Click to collapse
Not new, not rare:
http://en.wikipedia.org/wiki/Teh
Drop this file in your /system/etc folder, replacing the stock one. Cleaned up, and modified to work with a stock kernel or lean kernel.
Please open up the file, and read some of the notes I added, so you know what this does and how to change it if you so desire. It is very basic and straightforward.
Also, please remember one thing, if you want to go to the stock kernel, simply change any words in the scripts from "interactiveX" to "interactive".
Recommended lean kernel 3.16 with these scripts.
Designed to work with ALL Galaxy Note 3's running touch wiz 4.4.2 ROMs and running lean kernel or stock kernel. Other kernels are not guaranteed due to the voltages applied.
This will make a huge difference in performance and battery. Been using this (developed by me) for a long time now.
Summary:
*I/O optimization
*tuned interactive parameters
*fixed sysfs permissions for cpu's (root now has full control of sysfs tuneables)
*GPU sysfs identified for user to customize
*screen off frequency set to 1.2 GHz (can be changed by user)
*custom voltage set for bin 2 device. (Read instructions within file to adjust for others bins accordingly)
*custom mpdecision tuning and other relevant instruction regarding mpdecision binary
*general CPU tweaks for better performance, responsiveness and battery life (yes all 3 can be achieved, and are)
Again, open the file with a file explorer (or notepad+ in windows). Read it, understand it, adjust what you want, or leave it be. These settings are very much dialed in for the interactiveX governor of LK. It won't get much better. I'd say take a look at the voltage portion and mpdecision for now (found at the end).
Once more, drop file into the /system/etc directory... Replace the existing one, and reboot.
FILE DOWNLOAD
Updated today... many useful changes, and fixes (set up for stock kernel for now)
https://www.dropbox.com/s/tjlygujptls3lks/init.qcom.post_boot.sh?dl=0
Man that's one hell of a disclaimer.
Just giving you all a heads up.... I think there may have been a few errors in the stock init.qcom.post_boot file (they are human too, remember).
I am testing a few small changes to certain lines in the "factory" script to make sure. A brief explanation of it is that there are certain lines I removed from the one you all are using right now, and I did so because the file paths being called out did not exist!
However, I was going over this again tonight, getting ready for the official LP release and decided to review this odd discrepancy one more time. After doing some digging, I found that the file that some of those values were intended to be written to, were actually somewhere else!
Doh! - Sammy/QC. It is very possible that this location changed from a previous design or fs structure and somebody simply forgot to modify the script. Very interesting indeed.
Anyways, after I run this for a couple of days and do a little bit more investigating, I'll post the updated script for all of you.
Was wondering if anyone tried this, ill wait til after you update n test!
Updated dl link.. give it a go
I tried it didn't seem to have a noticeable difference in my opinion . I of course used the first script have yet to try the update.
Tried it
red_can_soda said:
Updated dl link.. give it a go
Click to expand...
Click to collapse
My phone started rebooting after 2 to 3 minutes....not sure what it is..perhaps low voltage or frequency...
red_can_soda said:
Updated dl link.. give it a go
Click to expand...
Click to collapse
Been running it all day no issues.
carl1961 said:
Been running it all day no issues.
Click to expand...
Click to collapse
Notice any improvement?
setfly95 said:
Notice any improvement?
Click to expand...
Click to collapse
I really haven't had time to notice, I will know in a few days.