Related
I was hit with the update before I knew better and it installed.
As soon as it restarted I can no longer access the top of the touch screen.
The notification bar, camera controls, web address bar, ect. there is basically a quarter inch dead spot at the top of my screen.
I tried factory and hard rests with no effect, the issue remains.
I did e mail HTC about this, but I'm not going to hold my breath on a reply, also the Sprint forums are down.
I installed the OTA last night.
My screen is not experiencing the issue you mentioned.
Might take it into a Sprint store for confirmation.
Good luck!
I am really enjoying mine.
I don't seem to be experiencing any issues since the OTA update either. It was the first thing I installed, even before my apps! I hope you get your problem worked out.
No problems here. I installed the OTA updates and have since rooted it as well. No problems.
3 Keyboards installed, Wifi-Tether(still working out the kinks) and its just moving along
no problem here either
Sent from my EVO using Tapatalk
Can we say it's pretty much safe now to go ahead and install the updates without worrying not being able to root after? Also did this update fix the SD Card issue for you? I've experience a couple times now that my card not being able to read until I remove it then place it back in. Even try formatting on the computer with a card reader but still no luck.
Both unrevoked and Toast's method still work after the OTA update.
Can we say it's pretty much safe now to go ahead and install the updates without worrying not being able to root after? Also did this update fix the SD Card issue for you? I've experience a couple times now that my card not being able to read until I remove it then place it back in. Even try formatting on the computer with a card reader but still no luck.
Click to expand...
Click to collapse
I don't know about being able to root after the update. But if you root before and do the update. You don't lose root. Well at least I didn't.
-------------------------------------
Sent via the XDA Tapatalk App
Take it back to the Sprint store and get a free replacement.
TheBiles said:
Take it back to the Sprint store and get a free replacement.
Click to expand...
Click to collapse
Save a trip. Make sure it's a service and repair site before you drive. Unlike other devices, sales only stores are not able to accept exchanges on the evo.
thecodemonk said:
Both unrevoked and Toast's method still work after the OTA update.
Click to expand...
Click to collapse
You should probably clarify that a bit. With Unrevoked, you actually apply the OTA and then root that version. With Toast's method, you're actually writing a version of the old rom onto the phone, thereby overwriting any OTA update you may have had. Then when you apply Flipz rom to it, it wants to update but can't because it fails.
So if you want the OTA, you gotta do Unrevoked for now. Just wanted to clarify that for folks.
sph33r said:
You should probably clarify that a bit. With Unrevoked, you actually apply the OTA and then root that version. With Toast's method, you're actually writing a version of the old rom onto the phone, thereby overwriting any OTA update you may have had. Then when you apply Flipz rom to it, it wants to update but can't because it fails.
So if you want the OTA, you gotta do Unrevoked for now. Just wanted to clarify that for folks.
Click to expand...
Click to collapse
Aha, thanks! I had just read that Toast's worked and hadn't looked much closer.
sph33r said:
With Unrevoked, you actually apply the OTA and then root that version. With Toast's method, you're actually writing a version of the old rom onto the phone, thereby overwriting any OTA update you may have had. Then when you apply Flipz rom to it, it wants to update but can't because it fails.
So if you want the OTA, you gotta do Unrevoked for now. Just wanted to clarify that for folks.
Click to expand...
Click to collapse
sph, since you seem to know what you're talking about, can I bug you with a noob question? Can I follow the first few steps of toast's root process (these):
- Power off the phone
- Hold volume down while powering the phone on. continue to hold volume down until you see the WHITE bootloader screen.
- After a few seconds it will begin to checking for files, and find PC36IMG.zip. while its doing this it will show a blue progress bar while its checking. (this takes 30 - 60 seconds to finish)
- It will then list all the images in the zip and ask you if want to flash. SAY YES
- When its finished it will ask you if you would like to reboot. AGAIN... SAY YES
- At this point it will boot into a rooted rom.
- YOU ARE NOW ROOT!!!
Click to expand...
Click to collapse
.....then just STOP and be able to run apps that require root access? Or, do I need to go through the whole process and load flipz ROM, which does not yet include the OTA update? Sorry if this is a dumb question, but I'm still learning the ins and outs of Android.
Hey I'm having the same problem with the notification bar only, I can access anything else just fine, but I can slide down the task bar at all. I bought the phone and the radio shack guy basically installed the ota as he handed me the phone, although my friend didn't install his ota yet and his task bar rolls down just fine. He postponed his ota because of this. BTW only way I can access it is by home screen menu button.
Ok just realised something since I was writing this from my evo in landscape mode.. I can open the task bar only in landscape not in normal mode. There's a bug right there, guess it only affects random users.
Update
I got my phone from the Sams Club (Radio Shack).
Called Sprint and they told me I am SOL as far as they are concerned, I have to deal with the place I got it from since it didn't ship from their warehouse (sounds like BS to me).
I can see why people are pissed at Sprint, they don't give a rats ass if my phone is having issues and will do nothing to help me get it replaced.
The guy at the Sams has been great the whole time and told me he will call as soon as they get one to replace it with, which since they are Radio Shack you have to figure that Sprint stores will be highest priority to get more phones so who knows how long it will take to get a replacement. I basically have a cool looking expensive battery eater.
I have had one e mail exchange with HTC and they told me to do a factory reset which I had already done twice before I resorted to "tech support". The reset does NOTHING to remove the OTA update. If this is in fact what caused this I can see nothing short of a wipe and reflash of the factory ROM to fix it. I am awaiting HTC's second reply.
I guess a rooted ROM may also be an answer, but since this phone is having issues already I don't know that rooting it would help my cause with getting it legitimately fixed.
A warning to all reading this, Sprint tech support will only tell you to remove the battery to try and remedy any issues you may have. They told me that is all they have been instructed to tell people with Evo issues.
chamelieon said:
Ok just realised something since I was writing this from my evo in landscape mode.. I can open the task bar only in landscape not in normal mode. There's a bug right there, guess it only affects random users.
Click to expand...
Click to collapse
Same here for me with the web browser I can use the upper right and left corners in landscape, but nothing in portrait; I can also drag the notification bar down in g mail in landscape. I will update my ticket with HTC.
Please log this problem...
with both Sprint and HTC.....I have the same problem. I "believe" it started after the OTA.
i'm having the same problem. just got my htc evo with sprint today. the notification bar was working fine until i installed the OTA update. everything else works fine except the notification bar will not work. the only way to access the notification bar is from the home screen by tapping menu and selecting notifications.
my brother got the phone friday when it came out and applied the OTA update and his is working fine.
i emailed HTC i will post the reply as well if anything is different.
i've googled this and apparently there are a few open forums on other sites with plenty of other people having this same issue. nobody seems to have a fix yet.
just a heads up when i called sprint they acted like idiots and told me they couldn't help and to take it to the sprint store to have them troubleshoot it.
that kinda irks me because after ending my 7 year relationship with t-mobile i really thought that sprint would be a little bit better. oh well... you win some, you lose some.
I didn't apply the OTA, but ran into this issue this morning. Taskbar would not roll down...It would start to for a split second, then snap back up.
A soft reset seems to have cured the problem for now.
hey guys, i have the G2 Touch running firmware build 2.73.111.26 CL#69351 on T-Mobile Germany.
today, i got the message that a firmware update is available, that mainly affects the youtube player. it was 3,6 MB large.
i clicked on "download" and afterwards on "install now" and then my phone rebooted. after reboot, first i saw the T-Mobile boot screen, then it booted into recovery mode.
in the beginning, there was a status bar moving (but with no status, just some movement, if you know what i mean) and then the status bar vanished. as it stayed like this without any change for about 10 minutes, i removed the battery and inserted it again, then i booted the phone like always.
but now i don't have the update and can't download it again. is there any way to get that update again?
thanks in advance for your help.
ok, i did a full factory reset to get the update again, that worked very good.
i got the update notification again, and tried installing it again.
download works, after clicking on "install now" the phone reboots and starts in recovery mode.
there is the status bar, and it is working until it is about half filled.
then the icon changes, i suddenly have an explanation mark on the screen, the status bar has vanished.
then nothing happens.
why doesn't it work? what can I do?
try pressing back or menu?
no key works.
for some reason, since the first factory reset, my pc's adb doesn't recognize the phone any more, so i can't see the url of the update. but the update window shows the filename, it is "OTA_Hero_T-Mobile_DE_2.73.111.91-2.73.111.26_R_release5pon5e4vkwhssvb1.zip" if that is helpful for somebody^^
also i called T-Mobile support a few minutes ago, and they said there was no update at all since the 2.73.111.26 that was published in november.
any idea, anybody?
and for the record, the following link works to get the update:
http://liveimage.htc.com/OTA_Hero_T-Mobile_DE_2.73.111.91-2.73.111.26_R_release5pon5e4vkwhssvb1.zip
can anybody help?
Most likely an update to the Youtube player that allows High Quality streams. All the newer builds (3.XXXXXXXX) have this new version, if you can live without, than it's nothing major.
I experienced the same: OTA Update announcement - something about "YouTube Player" blah - after installation, my hero was frozen.
Back & Menu brought me into the maintenance menu: Reboot without upgrade-activation brought back my old hero. No changes done.
Very quick (~1h later) "first level e-mail support" from t-mobile: No OTA-updates possible on G2 Touch (...harhar), pointed me to website with old firmware update.
I asked them to contact second level technical support - as it was definetly an OTA firmware-update and I already have installed the older firmware-update: Answer pending, since yesterday afternoon.
I hope, this was no hacker-intrusion attempt. T-Mobile not being informaed about an OTA firmware-update by whoever, does not really fill me with confidence. Would be a nice little hack, if some illformed hacker found out a way to pretend an firmware update OTA and used the willingness of all hero owners to take even a small step towards Android 2.1 wonderland...
.g.
No, it's really no hacking attempt. The update is on HTC servers, that's why T-Mobile support doesn't know it. Will contact HTC support today.
ok, I just called HTC.
the guy who could hardly speak german but tried very much told me, that they knew of the problem, as I am not the only one with it.
he recommended to perform a full factory reset, then try again.
as I told him that I already had done this several times, he told me I had to send the phone in via T-Mobile, so they can fix this.
considering the fact that this is a very minor update and that I need my phone, I now decided to wait some more weeks till the 2.1 update will (hopefully) arrive.
maybe the 2.1 update will work, if not I still can send it in. also, the update may be available to install via usb from PC, so it might work better.
so it's waiting for 2.1 again
Hi,
In the Netherlands we got this update too. It fixes youtube and enables the phone to get Android 2.1 OTA, which will be available in a week or two.
The original HTC Hero firmware checks for updates every two weeks. Maybe the next trick will be helping you to force download the update (it worked for me to force the update):
Set the device's date a year in the future (for example 15 june 2011). Go back to home screen and probably the update wil appear in your screen.
Let us know if it worked for you..
It worked for me. As soon as I changed the date I received the update.
Thanks for the solution.
Is it just me thats wondering why.. if they are going to release a 2.1 update soon... are they packaging in an update for youtube in this ota?
polakscot said:
Is it just me thats wondering why.. if they are going to release a 2.1 update soon... are they packaging in an update for youtube in this ota?
Click to expand...
Click to collapse
I guess more people where complaining about the broken Youtube player than about the 2.1 update (at least it was more visible for our customers). Having this fixed and declared on the support site makes life easier for customer support...it is stupid I know, but the average user is that dump.
makerber said:
I guess more people where complaining about the broken Youtube player than about the 2.1 update (at least it was more visible for our customers). Having this fixed and declared on the support site makes life easier for customer support...it is stupid I know, but the average user is that dump.
Click to expand...
Click to collapse
I just hope it doesnt mean that this is all we are getting. For a while at least.
polakscot said:
Is it just me thats wondering why.. if they are going to release a 2.1 update soon... are they packaging in an update for youtube in this ota?
Click to expand...
Click to collapse
they are also releasing something wich prepare the ota server and repare it..
sebxd said:
they are also releasing something wich prepare the ota server and repare it..
Click to expand...
Click to collapse
Sure.. but how many months to wait now.. otherwise why update youtube at all?
Rumours are saying that it's coming the 18th and I think that pretty believable because we have got that update today...
And I don't know anything about youtube update ^^ maybe they wanted to give us something instead of an empty update ^^
Yeah, it makes perfect sense.
There was no "System updates ..." item in the phone status, before this update. I don't see why HTC would update the FOTA client if they didn't actually plan on sending us the 2.1 update soon. Probably takes a few days though.
Be patient
Hi,
I did the clock tip and got immediatly the update message. Download and installation went fine. Rebooting took about 10 minutes, so be patient and let the update do its work.
Peter
Should I bite the bullet and try an upgrade? I'm still marinating on 2.1.
if you feel safe, and don't mind taking the phone back to the store for repair at any random day
then go ahead by all means.
PROS: you'll find out sooner, and get your phone warrantied before it expires, or your device might work perfectly and never dies.
CONS: you'll most likely be stuck without a phone for a few weeks
I've had JL2 for a couple of weeks and it's working well. I did have Darky's ROM on it for a couple of days but it was acting up so I put JL2 back on.
No lag, Great GPS, no issues at all.
Ian
I love JL2... But I have not had a single issue since the phone came out. I was the first person to buy the phone at the north Bell store in the Eaton Centre the day it came out on Aug 6th.
I flashed jk4 on dec 8th or so and had no issues and then moved to JL2 a few days ago. On 2.1 I always got a quick lock with GPS but did suffer from minor drifting. That drifting is now gone on 2.2 (both jk4 & jl2)
Sent from my GT-I9000M
And after reading the sd issue thread I would reccomend upgrading even more. If it bricks with sd failure it really sounds like Bell had stepped up with getting new phones and a credit out to people.
Sent from my GT-I9000M
been on jl2 since dec 24th, everything works fine for the most part. One issue though - i can't close the contacts, i have to press the home button and then when i check the task manager, it's still running in the background. This get's pretty annoying. Anyone else experiencing this?
EDIT:: also do you guys see 304 MB of ram that's accessible (through task manager->ram manager)? That's what i see (wasn't 2.1 also like this?)
asicman said:
Should I bite the bullet and try an upgrade? I'm still marinating on 2.1.
Click to expand...
Click to collapse
Do it now so that if you have any problems, it'll happen sooner than later, and you'll still be covered by your warranty, which you are almost 5 months through.
If I were you, I'd install it as soon as possible. Worst case scenario is they ship you a new phone within 7 days if your phone breaks. My phone had a failed internal sd when I did a factory reset before I went to try the jl2 upgrade since I was told by bell it would fix the problem, but unforunately my phone broke before I even got the chance to do it so bell did a work order and sent me a new phone which I should receive within 7 days, all I have to do is ship them back my broken phone when I receive the new one.
asicman said:
Should I bite the bullet and try an upgrade? I'm still marinating on 2.1.
Click to expand...
Click to collapse
My buddy's phone died after going to JL2. The good thing was that Bell is giving him a new phone within the next 5 business days AND he got $100 credit for all the trouble.
I flashed the jl2 modem today on a jpu based rom. A couple hours later and I'm now stuck in a boot loop. coincidence? Who knows.
I've been on JL2 since it came out on Kies. The day before while I was on JK4 my phone was starting to get some FCs and at one point I got the "Internal SD Unexpectedly Removed" error so I'm pretty sure my internal SD was on the brink of failing. I'm glad a new firmware came out. I immediately upgraded and did a factory reset and formatted the internal SD. It's been smooth sailing ever since and I do take a lot of pictures, video, etc. on my phone with no issues since JL2.
I love JL2 so far. It's fast (just as fast as JK4 was) and after some tweaking via instructions I found here GPS is good. I have had ONE force close since upgrading and I think that was just the Winamp app being stupid.
I haven't really seen anyone posting here about actually being bricked after JL2. Has anyone actually upgraded to JL2 and got the internal SD error?
Thanks for the input everyone. I'm a little more confident now with upgrading. And it of course makes sense to do it now to find out problems whilst there is still warranty.
I'll give it a wack tonight. Btw, with an upgrade, do things like music and contacts get wiped out? Its my first android upgrade and I plan on using kies. Any caveats with kies?
Sent from my GT-I9000M using XDA App
asicman said:
Thanks for the input everyone. I'm a little more confident now with upgrading. And it of course makes sense to do it now to find out problems whilst there is still warranty.
I'll give it a wack tonight. Btw, with an upgrade, do things like music and contacts get wiped out? Its my first android upgrade and I plan on using kies. Any caveats with kies?
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
You should be ok with a straight upgrade, but I'll always recommend doing a factory reset - it clears out the crap that could cause problems.
As for your music and stuff, that depends where you store it. If you have it on your internal sd, and you do a factory reset, then yes. If its on your external sd, then no. Contacts are fine if you store them on your SIM or sync with Google.
andd64 said:
been on jl2 since dec 24th, everything works fine for the most part. One issue though - i can't close the contacts, i have to press the home button and then when i check the task manager, it's still running in the background. This get's pretty annoying. Anyone else experiencing this?
Click to expand...
Click to collapse
I am and it's very irritating indeed. It's the same with the internet browser (always has been)
andd64 said:
EDIT:: also do you guys see 304 MB of ram that's accessible (through task manager->ram manager)? That's what i see (wasn't 2.1 also like this?)
Click to expand...
Click to collapse
Yes
gtg2 said:
I flashed the jl2 modem today on a jpu based rom. A couple hours later and I'm now stuck in a boot loop. coincidence? Who knows.
Click to expand...
Click to collapse
Is it really safe to combine different files from different ROMs? I would think mixing and matching can cause some problems.
Ian
I do have one complaint after going to JL2 -
In my Picasa albums in Gallery, the photos are no longer sorted by date as they were in 2.1. Also, sometimes the Gallery fails to load/display the full resolution image instead just displaying the pixelated preview while flipping through images.
Never had this problem in 2.1 (JH2) - I wonder if it's possible to revert the Gallery app to the previous version?
I got my phone in september and never had any trouble with it. I have rooted it, applied different lag fix and enen managed to stupidly brick it but it always survived.
I like JL2, but I had no problem with JK4 either. However, I don't find TouchWiz as smooth as it was with JH2. It lags a little when switching across apps or homescreens, so I use LauncherPro which is perfect.
BUT, my GPS doesn't work at all
It worked ok before installing JL2, but now its totally useless. I can see satellites but can't get a fix....any advice?
Smooth ride so far. Went from stock 2.1 (end-of-August purchase) to JL2. I did not do the JK4.
So far ok.............. I seem to get FC on the Samsung hub everytime I pull the battery out and I have to re-install the app. GPS locks but it takes awhile.
Just do it! My phone was bricked on Dec 25 for no reason. I updated to froyo 2.2 via Kies about a month ago. I called Bell and told them my issue, internal fried sd card! They gave me Bell's Data Support line. I'm getting a brand new Samsung Galaxy with the latest Dec 24. froyo 2.2.1 update installed. I'll be without a phone for about a week or so but there customer service is awsome. I also go a $100 credit to my account for the inconvience.
If you update and phone is bricked call this number 1.877.328.2123 and they will send you a new phone in 3-5 days.
I just purchased this Iconia on clearance. I brought it home, went through set up everything went fine and I love it.
Then the update thing popped up, I was like "cool" and said OK download. I waited and nothing seemed to happen.
I clicked on the third button over on the bottom (not sure what it's called) and checked what it was doing. It was not downloading. So either I get a bar with downloading and 0% out of 100% or it just dissapears when I say OK download.
It's not a deal breaker. Just annoying. Thanks.
Android version 3.1
Kernel 2.3.36.3
Build number Acer_A500_4.010.13_COM_GEN2
This may sound silly, but have you tried a full shut down, bringing it back up and trying again?
If it refuses to update then you could always root the thing, install clockworkmod and manually install an update from SDHC. That atleast works.
please check the fallowing .
Since you say that you bought the tablet on clearance..
Was it new in box and plastic wrap..
was this tablet a return. IF This is the case .. browse the app folder .. LOOK for programs like Acer Recovery Installer... Bustbox .IconiaRoot. .
these things will give you indication that the tab is rooted...
download root checker app from the market can also check for this..
if its not been rooted .. try going into settings /privacy and reset the device.. post back if you figure any of the above out. The more information you provide the easier it will be to help you get to 3.2.1 latest android system
Good Luck
It was a floor demo model, reset to "new" settings. I don't believe it was rooted since it didn't leave the store. I did powered it down and back up again. I wanted to post this before I reset the device, you said in settings/privacy? I don't mind resetting to like it was right out of the box. Thanks again for the help.
Floor Demo models are very iffy. The brutality they endure in the hands of people walking by, it's troublesome...
I did a reset, still no update love.
I called tech support for Acer and talked to two different levels of support. Basically talked me through stuff I had already tried. Force stopping and clearing cache of updater. Rebooting, turning on Bluetooth (?) Still no luck.
He wants me to let it sit and see for a few hours and gave me a number to use when I call back to set up sending it in to be fixed. He has no idea, never had this happen before.
Oh well so much for wanting an easy android tablet, without the bugginess of my rooted nookcolor. Thanks.
So the good news and the bad. Good news the tablet wasn't the problem, my internet connection was. I guess satellite internet and Acer's update servers don't get along.
I brought it back to Staples and spoke to a easy tech guy and explained what it was doing, he hooked it to their wifi and poof it started downloading. Boy did I feel stupid. So let the big patch download there and went to the free MC Donald's wifi for the following two smaller ones.
So all is good in the tablet world again, even received the case and screen protectors I ordered.
Thank you.
So for a while now I have not been able to update my PRL or Profile. It hasn't bothered me because for the most part the phone has worked fine until recently. A friend texted me and said he was going to call me. He text back a few minutes later and ask why I didnt answer. Phone was next to me the whole time and it didnt ring or so any kind of notification that he had tried to call. Took him 3 calls before my phone rang and he got through.
I have applied for a few jobs within the past few weeks and have heard nothing from anyone which I am surprised because I was referred to one company by and friend who put in a good word for me and said that his supervisors were really impressed with my resume. So now I feel like this issue could possibly be costing me job opportunities and I want to get it figured out.
The errors are 6602 and 407. I've tried to do it over 4G and put my phone just in CDMA mode for 3G only and get the 407 code for 3G and the 6602 over 4G.
I am running Stock rooted/odexed MK2 and I just did a clean flash of the rom again clearing data/cache and dalvik seeing if that would help which it didn't. I have reflashed the modem seperately also with no help.
I have seen many threads of others having this issue but no answers on a fix. Has anyone experienced this and actually done something that has resolved the issue?
If you feel it may be costing you a job, why not flash a nand of a stock rom, assuming you have one
Sent from my SPH-L720 using XDA Free mobile app
I did, I flashed back to MF9 using this http://www.rwilco12.com/Files/Devic...H-L720)/Stock ROMs/MF9/Full Restore/Unrooted/
Which should be a stock factory restore, still would not update profile or prl. From there I updated to NG2 with Samsung Kies and I am still not able to update either.
tenaciousj said:
I did, I flashed back to MF9 using this http://www.rwilco12.com/Files/Devic...H-L720)/Stock ROMs/MF9/Full Restore/Unrooted/
Which should be a stock factory restore, still would not update profile or prl. From there I updated to NG2 with Samsung Kies and I am still not able to update either.
Click to expand...
Click to collapse
What kernel do you use?
(I fixed this issue I my phone, but SERIOUSLY, what seemed to fix it MADE NO SENSE, so I'm not going to to relate it again, you can look up my posts if you want, but I wouldn't waste your time. I'm more interested in what kernel you are using... if it isn't KT-SGS4, then it doesn't matter.)
Other than that, have you tried the ##72786# dialer code, which is supposed to reset that stuff (didn't fix it for me personally)? You may have to reactivate your phone though (I did), which isn't that much of an issue...
rsngfrce said:
What kernel do you use?
(I fixed this issue I my phone, but SERIOUSLY, what seemed to fix it MADE NO SENSE, so I'm not going to to relate it again, you can look up my posts if you want, but I wouldn't waste your time. I'm more interested in what kernel you are using... if it isn't KT-SGS4, then it doesn't matter.)
Other than that, have you tried the ##72786# dialer code, which is supposed to reset that stuff (didn't fix it for me personally)? You may have to reactivate your phone though (I did), which isn't that much of an issue...
Click to expand...
Click to collapse
For kernel version it shows 3.4.0-2162929 which I'm guessing is the stock NG2. I haven't flashed anything else since updating through Kies to NG2.
I've done the 72786 dial code a handful of times and it still didn't help. The only thing that solved was a issue I had after I first updatd to NG2 I had no working 4G. Phone would only connect to 3G and that was when it was in CDMA only mode. Aside from that it hasn't helped with the PRL/Profile update issue I'm having.
tenaciousj said:
For kernel version it shows 3.4.0-2162929 which I'm guessing is the stock NG2. I haven't flashed anything else since updating through Kies to NG2.
I've done the 72786 dial code a handful of times and it still didn't help. The only thing that solved was a issue I had after I first updatd to NG2 I had no working 4G. Phone would only connect to 3G and that was when it was in CDMA only mode. Aside from that it hasn't helped with the PRL/Profile update issue I'm having.
Click to expand...
Click to collapse
Yeah, that does sound like a stock kernel to me. Have you tried updating it through the Sprint Zone app? In Settings, More Networks, Mobile Networks, Network Mode, if it is not set to Automatic, you can try setting it to that and see if it lets you update after reboot, I have heard that can help but did not fix it for me (I have it set to LTE/CDMA). Have you seen this thread: Galaxy S4/Note 3/Mega - Update Profile/PRL/HFA Fix for Sprint/Boost/Virgin Mobile/etc? It is complex (don't IGNORE steps 5, 6, 7 and 8, which most people in the thread seem to...). I have not personally used this method, I was planning to before my issue resolved itself, but I didn't have a donor GS4 either (damn it, I JUST remembered that I DO, I f*ed up the USB port on my first one and completely forgot about that! BLOW MY MIND! But anyways...).
rsngfrce said:
Yeah, that does sound like a stock kernel to me. Have you tried updating it through the Sprint Zone app? In Settings, More Networks, Mobile Networks, Network Mode, if it is not set to Automatic, you can try setting it to that and see if it lets you update after reboot, I have heard that can help but did not fix it for me (I have it set to LTE/CDMA). Have you seen this thread: Galaxy S4/Note 3/Mega - Update Profile/PRL/HFA Fix for Sprint/Boost/Virgin Mobile/etc? It is complex (don't IGNORE steps 5, 6, 7 and 8, which most people in the thread seem to...). I have not personally used this method, I was planning to before my issue resolved itself, but I didn't have a donor GS4 either (damn it, I JUST remembered that I DO, I f*ed up the USB port on my first one and completely forgot about that! BLOW MY MIND! But anyways...).
Click to expand...
Click to collapse
Thanks for the link I'll check it later. My account is actually a SERO account but I did have working updates when I first got the phone. The phone was also new and activated on the account as soon as I got it.
Sent from my SPH-L720 using Tapatalk
tenaciousj said:
Thanks for the link I'll check it later. My account is actually a SERO account but I did have working updates when I first got the phone. The phone was also new and activated on the account as soon as I got it.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Yeah, I honestly don't really understand what that thread means when it talks about flashing to legacy accounts. I believe I have a SERO account (I don't know, my wife pays the bill... :silly: ) and the updates worked fine until I think messing with the APNs to try to fix my inability to send MMS messages messed things up. I never flashed any legacy accounts or anything.
So... at this point, even though IT MAKES NO SENSE, I will tell you what SEEMED to fix the issue for me. I STRESS, this MAKES NO SENSE TO ME, but after months of being unable to update my PRL/PROFILE, after doing the following, I was suddenly able to update them. It is likely an EXTREME coincidence, but for the hell of it I will now tell you.
Using the Pro version of Solid Explorer, I copied the Carrier folder from the root of my phone to my external SD card. THAT IS IT. YES... THAT IS IT. NOTHING MORE. I did NOT copy it back, I did not change anything. HOW this could possibly have cured the problem would seem to make very little sense, I can only conjecture that Solid Explorer, in the act of copying the folder to my external SD card, somehow 'refreshed' something in the carrier folder in the root of my phone... and I am grasping at straws here. I think you can probably understand WHY I did not want to reveal that this is what SEEMED to cure my issue, because it is so unlikely, and more likely an extreme coincidence and something else happened that I am not aware of, but that is the only thing I know of that I did related between when it was not working to when it was. So now you know at least (and as I have told a few others, there is no point in not trying, other than the crushing disappointment of it almost certainly not working)...
I should add as well however, now that it occurs to me, that I use the KT-SGS4 KitKat 4.4 TouchWiz kernel, and had for a long time suffered from a loss of mobile connection and GPS. requiring a reboot to get them back (within a similar time period to my PRL/PROFILE issues). I seem to have fixed the mobile connection/GPS loss by choosing the 'correct' governor to use with that kernel for my ROM, and it is not IMPOSSIBLE that THIS occurred at the time I was able to update my PRL/PROFILE, but I do not remember exactly, and I'm PRETTY CERTAIN I still had the issue with the mobile connection/GPS loss after updating my PRL/PROFILE, so I think that likely rules out KT-SGS4 as a culprit in this issue. (But then, I was forgetting that we already established that you were on a stock kernel...)
KNOWN issues with KT-SGS4 Sprint KitKat 4.4 TouchWiz kernel
rsngfrce said:
Yeah, I honestly don't really understand what that thread means when it talks about flashing to legacy accounts. I believe I have a SERO account (I don't know, my wife pays the bill... :silly: ) and the updates worked fine until I think messing with the APNs to try to fix my inability to send MMS messages messed things up. I never flashed any legacy accounts or anything.
So... at this point, even though IT MAKES NO SENSE, I will tell you what SEEMED to fix the issue for me. I STRESS, this MAKES NO SENSE TO ME, but after months of being unable to update my PRL/PROFILE, after doing the following, I was suddenly able to update them. It is likely an EXTREME coincidence, but for the hell of it I will now tell you.
Using the Pro version of Solid Explorer, I copied the Carrier folder from the root of my phone to my external SD card. THAT IS IT. YES... THAT IS IT. NOTHING MORE. I did NOT copy it back, I did not change anything. HOW this could possibly have cured the problem would seem to make very little sense, I can only conjecture that Solid Explorer, in the act of copying the folder to my external SD card, somehow 'refreshed' something in the carrier folder in the root of my phone... and I am grasping at straws here. I think you can probably understand WHY I did not want to reveal that this is what SEEMED to cure my issue, because it is so unlikely, and more likely an extreme coincidence and something else happened that I am not aware of, but that is the only thing I know of that I did related between when it was not working to when it was. So now you know at least (and as I have told a few others, there is no point in not trying, other than the crushing disappointment of it almost certainly not working)...
I should add as well however, now that it occurs to me, that I use the KT-SGS4 KitKat 4.4 TouchWiz kernel, and had for a long time suffered from a loss of mobile connection and GPS. requiring a reboot to get them back (within a similar time period to my PRL/PROFILE issues). I seem to have fixed the mobile connection/GPS loss by choosing the 'correct' governor to use with that kernel for my ROM, and it is not IMPOSSIBLE that THIS occurred at the time I was able to update my PRL/PROFILE, but I do not remember exactly, and I'm PRETTY CERTAIN I still had the issue with the mobile connection/GPS loss after updating my PRL/PROFILE, so I think that likely rules out KT-SGS4 as a culprit in this issue. (But then, I was forgetting that we already established that you were on a stock kernel...)
KNOWN issues with KT-SGS4 Sprint KitKat 4.4 TouchWiz kernel
Click to expand...
Click to collapse
Yeah that copying the carrier folder don't seem like it would do anything but maybe I'll give it a try. Whats the best way to root right now? I just want to make sure it will let me unroot the phone if it dont work and no trip knox incase I have to bring this in.
Do you know what bootloader you are on? You said you were on Sys MK2, then went back to MF9 and now are on NG2. When you went to NG2, unless you took very specific steps to keep the MF9 bootloader, you would be on the NG2 bootloader now, which includes Knox, and you can no longer go back beyond NAE I think. If you don't know what bootloader you have, get DeviceInfo https://play.google.com/store/apps/details?id=com.jphilli85.deviceinfo from the Play Store and under the Software heading, see what it shows for the last 3 digits for Bootloader. This makes a difference on the best root method.
rsngfrce said:
Do you know what bootloader you are on? You said you were on Sys MK2, then went back to MF9 and now are on NG2. When you went to NG2, unless you took very specific steps to keep the MF9 bootloader, you would be on the NG2 bootloader now, which includes Knox, and you can no longer go back beyond NAE I think. If you don't know what bootloader you have, get DeviceInfo https://play.google.com/store/apps/details?id=com.jphilli85.deviceinfo from the Play Store and under the Software heading, see what it shows for the last 3 digits for Bootloader. This makes a difference on the best root method.
Click to expand...
Click to collapse
Bootloader and software version both show up as NG2 on Device Info.
tenaciousj said:
Yeah that copying the carrier folder don't seem like it would do anything but maybe I'll give it a try. Whats the best way to root right now? I just want to make sure it will let me unroot the phone if it dont work and no trip knox incase I have to bring this in.
Click to expand...
Click to collapse
I'm not an EXPERT on this subject, but if you are on NG2 stock unrooted right now, I believe you can use: CF-Auto-Root to root it. Or, here is a stock rooted version of the NG2 ROM:
[ROM][NG2] Stock Rooted NG2 (which mentions that it has Knox removed).
As far as tripping stuff, I'm somewhat unsure about that to be honest. I have always used Triangle Away on my phone, but it has a warning now not to use it with a custom kernel (which I use). My counter is at 3, but I am out of warranty anyway.
I spent a few hours on chat with Sprint. They couldn't figure it out so I'm bringing it in tomorrow. Guessing I'll get a new phone. The people at the Sprint store seem rather limited in their knowledge, at least they were last time I was there.
Sent from my SPH-L720 using Tapatalk
tenaciousj said:
I spent a few hours on chat with Sprint. They couldn't figure it out so I'm bringing it in tomorrow. Guessing I'll get a new phone. The people at the Sprint store seem rather limited in their knowledge, at least they were last time I was there.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I guess if there are no signs that it has been rooted, that's probably a good way to go. You apparently had a phone pre-Knox and now I think you will get one with a Knox system, but it doesn't matter in your case since went beyond the point of no return already with the bootloader... I don't know if you have the new Spark model (tri-band), I don't know if the still make the old plain one like I have anymore...
rsngfrce said:
I guess if there are no signs that it has been rooted, that's probably a good way to go. You apparently had a phone pre-Knox and now I think you will get one with a Knox system, but it doesn't matter in your case since went beyond the point of no return already with the bootloader... I don't know if you have the new Spark model (tri-band), I don't know if the still make the old plain one like I have anymore...
Click to expand...
Click to collapse
I got the phone I have now about a month after the GS4 came out so its non sparks. I stayed on MK2 for so long because I couldn't find a newer rom that looked to be stable and not have to jump through a bunch of hoops to install it. The Odin screen shows everything being zero and offical software so I should be good. I am going to sign out of all of my accounts before I bring it in being I have a lot of apps bought through the store that only work on rooted phones. I hope I can get a tri band to replace it. My friend has a triband GS4 and it gets much better data speeds than mine.
Yeah, I mentioned elsewhere here before that I actually didn't know of the existence of the "Sparks" version of the G4. I screwed up the USB port on my G4 before upgrade time, so I had to buy another G4 on Amazon. Upgrade time has come up, so I was just looking and saw my phone listed as "Non-Sprint Sparks", which I thought meant that they called it the "Sparks" model because I hadn't bought it from Sprint... took me a while to figure out what that actually meant... :laugh:
Sprint online nor the store could fix it so I got a new one.
No rooting but error 407
As titled, I've not rooted the phone. I'm getting error code 407 on attempts to update PRL and Update profile. Download updates manually does nothing. Note I'm on a Samsung Note 4, Sprint. Had updated to Marshmallow 6.0.1 late March but then above actions persist since then. I'm using Wi-Fi only, Sprint service disconnected as I couldn't pay bill when I lost job during a disabling illness.
I haven't been able to update prl profile or firmware for over 8 months. I am not rooted never have been I have called customer service over and over replaced SIM card did the ## stuff nothing has helped. The phone works although service isn't as good as it could be and says there is a prl update available but I always get connection error 6 on all 3. I also have serious battery draining issues as far as my data I do get a strong 4g lte connection just service is low and sometimes drops when I am close to a sprint tower every other phone gets full bars really on any network especially sprint. I hope someone can help I like my sph-720 other that that and honestly I can't afford to keep up with the Joneses. Hopefully this is enough info please help
00Lee said:
I haven't been able to update prl profile or firmware for over 8 months. I am not rooted never have been I have called customer service over and over replaced SIM card did the ## stuff nothing has helped. The phone works although service isn't as good as it could be and says there is a prl update available but I always get connection error 6 on all 3. I also have serious battery draining issues as far as my data I do get a strong 4g lte connection just service is low and sometimes drops when I am close to a sprint tower every other phone gets full bars really on any network especially sprint. I hope someone can help I like my sph-720 other that that and honestly I can't afford to keep up with the Joneses. Hopefully this is enough info please help
Click to expand...
Click to collapse
Have you done a factory reset via recovery? Or you might want to flash latest full stock