Database Users

Holy hell... a lot of work

Alright, I have an HTC Magic which essentially acts as my backup phone since I have a Desire. I figured I would try my hand out at flashing a rom on the Magic. Am I missing something, because it seems like a LOT of work. For something that people make out to be so simple, it sure is a pain. Every step I take, I run into issues. At this point I need to:
- Make a Goldcard. (Actually done, I think...?)
- "Fix" my SPL as it's "perfected.
- Update the Radio since the "fix" will apparently mess it up.
- Update the recovery using a customer recovery image.
- Then maybe flash a ROM to it and hope it works.
Am I missing something...or is this WAY more work then people make it out to be. Looking through the forums before starting this... people made it seem like all you had to do was make a Goldcare, copy the rom .zip to it, and use the fastboot method to flash it. I have flashed ROMs on WinMo several times, and it's never been nearly this much run around...even when things mess up. I thought doing this on Android was easier then on WinMo...
So... am I missing something? Is there an easier way that doesn't involve all this run around? Even so, hopefully I have almost everything I need at this point. Is there anything else I am going to run into that is going to cause a need for even MORE work? Any tips here? Thanks.
UPDATE: On trying to flash the SPL "fix" it goes through the installation then tells me that the CID is incorrect. I have tried it 4 or 5 times, using two different cards. It shouldn't be wrong. Any help? Don't understand why it keeps telling me the CID is incorrect. I have noticed though, for some reason, every time I restart the Magic, it gives me a different number when trying to get the CID. Is there a way to bypass this? Have been trying for 4 hours and have gotten no where at all...

Whiterin said:
Alright, I have an HTC Magic which essentially acts as my backup phone since I have a Desire. I figured I would try my hand out at flashing a rom on the Magic. Am I missing something, because it seems like a LOT of work. For something that people make out to be so simple, it sure is a pain. Every step I take, I run into issues. At this point I need to:
- Make a Goldcard. (Actually done, I think...?)
- "Fix" my SPL as it's "perfected.
- Update the Radio since the "fix" will apparently mess it up.
- Update the recovery using a customer recovery image.
- Then maybe flash a ROM to it and hope it works.
Am I missing something...or is this WAY more work then people make it out to be. Looking through the forums before starting this... people made it seem like all you had to do was make a Goldcare, copy the rom .zip to it, and use the fastboot method to flash it. I have flashed ROMs on WinMo several times, and it's never been nearly this much run around...even when things mess up. I thought doing this on Android was easier then on WinMo...
So... am I missing something? Is there an easier way that doesn't involve all this run around? Even so, hopefully I have almost everything I need at this point. Is there anything else I am going to run into that is going to cause a need for even MORE work? Any tips here? Thanks.
UPDATE: On trying to flash the SPL "fix" it goes through the installation then tells me that the CID is incorrect. I have tried it 4 or 5 times, using two different cards. It shouldn't be wrong. Any help? Don't understand why it keeps telling me the CID is incorrect. I have noticed though, for some reason, every time I restart the Magic, it gives me a different number when trying to get the CID. Is there a way to bypass this? Have been trying for 4 hours and have gotten no where at all...
Click to expand...
Click to collapse
I guess that I should be moving this to General since this is a Q&A and not a means to simplify what you are trying to accomplish.
Moving to:
Magic General
Discussion about the T-Mobile myTouch 3G, HTC Magic (general Q&A, tips & tricks)

Wow, do I know how you feel.... I recently got a Vibrant (galaxy s). So sine I got a new phone I unrooted my MT3g and sent it in on warranty since it was kinda scratched, so I can give it to my wife. Well with my first phone I was able to do the on click root since it came originally loaded with cupcake.... Well as it turns out if it comes pre loaded with donut you can't downgrade any more...lol So I had to do the gold card method.....it sucked.....

I can't even get stuff to work with the Goldcard. It keeps telling me the CID is incorrect... which it may be, since it gives me a new number every time I restart the damned thing. It can't be this hard to root all Android devices I hope... this is just ridiculous.

Whiterin said:
I can't even get stuff to work with the Goldcard. It keeps telling me the CID is incorrect... which it may be, since it gives me a new number every time I restart the damned thing. It can't be this hard to root all Android devices I hope... this is just ridiculous.
Click to expand...
Click to collapse
No, its not.... A good example is to root the vibrant you just flash a update.zip file...lol. But the sapphire/magic/mytouch is a great phone with allot of development support. But from what I understand one of the hardest roots..

Well that sucks. Kinda wanted to see how Froyo would run on it, and wanted to get a feel of how it was done before attempting it on the Desire. How did you manage to get the thing flashed?

Whiterin said:
Well that sucks. Kinda wanted to see how Froyo would run on it, and wanted to get a feel of how it was done before attempting it on the Desire. How did you manage to get the thing flashed?
Click to expand...
Click to collapse
the CID error tells me your gold card creation failed.
Check the process description at theunlockr.com. that worked for me.
My first mistake was formatting FAT and NOT FAT32. It must be formatted FAT32.
I used a 2GB PNY and it works great.

yes, our phone (the sapphire, magic, MT3G, whatever the carrier calls it) is one of the craziest to root. I have the 1.2 version that came out after the fender, so by default i need to do the goldcard method. I made the goldcard, but then my daughter dropped my phone, and i had to get it replaced, someone is currently borrowing my card reader, so i have to wait to root the new one.
one step from reading the forums that alot of people miss, is replacing the first two digits of the "gold card id" to 00.. you have to do this, or the thing wont work. at least if you're having issues on the gold card step you're not close enough to the steps that can BRICK your phone...
all i can say is make sure you follow the directions STEP BY STEP, i've seen a number of people who flash the wrong image first and it totally bricks the phone. in my case that would suck, as being on the non-contract plan, i get no discount for new phones.
hope that helps a little.

Yes, the zeros are critical but as I recall theunlockr link above (paste and cut) takes care of that for you. The gold card is the hard part to get right.. The rest is very straightforward.

Thanks for the input guys. Going to try a few more things.

Alright. Following the instructions. Step by step, I am still getting "CID Incorrect! Update Fail!"
This is very frustrating as there isn't any reason it shouldn't be working...

Darklordzim said:
yes, our phone (the sapphire, magic, MT3G, whatever the carrier calls it) is one of the craziest to root. I have the 1.2 version that came out after the fender, so by default i need to do the goldcard method. I made the goldcard, but then my daughter dropped my phone, and i had to get it replaced, someone is currently borrowing my card reader, so i have to wait to root the new one.
one step from reading the forums that alot of people miss, is replacing the first two digits of the "gold card id" to 00.. you have to do this, or the thing wont work. at least if you're having issues on the gold card step you're not close enough to the steps that can BRICK your phone...
all i can say is make sure you follow the directions STEP BY STEP, i've seen a number of people who flash the wrong image first and it totally bricks the phone. in my case that would suck, as being on the non-contract plan, i get no discount for new phones.
hope that helps a little.
Click to expand...
Click to collapse
Not to thread jack, you know you can use any GoldCard with any phone, as long as it was made properly.

Any ideas on why this one isn't working then? Saying "Incorrect CID" when I try to flash anything with it.

Not sure. I know it took me 3 tries to get mine working right.
Sent from my HTC Magic using XDA App

[Q] What can I do? (Stuck in Fastboot)

I was using the new HTC Gratia Rom that was posted in the development forum, was restoring some apps with Titanium Backup manager when my phone rebooted, then it got stuck in a boot loop. I wiped it and rebooted again but no joy, stayed stuck in the loop.
Anyway, I recently installed a new recovery image, one of the ones for jailbreaking the PS3, so I have no USB access. Also it has a few extra options for wiping than the Amon RA recovery, and I guess I shouldn't have used the format boot option! Now on bootup all I get is "FASTBOOT USB", though I can still get into the psfMod recovery image.
That isn't much use to me though, as I stupidly deleted my nandroid backup and the update.zip file from my SD Card earlier while tidying it up a little bit. I don't have any other way of accessing the SD card and attempts to push another recovery image (with USB access) have failed.
I've also tried to install RUU's, both a T-Mobile UK one and a WWE one. That results in the following error: "ERROR [140] BOOTLOADER VERSION ERROR".
I guess because the current image version is: 3.31.110.1 and the RUU is only: 2.73.110.26. I don't think there's an RUU of this version available, from reading it sounds like it was an OTA, it's not something I installed myself, T-Mobile sent me this phone recently after my screen stopped working properly.
If you've managed to read this far without falling asleep, any suggestions would be welcome hopefully not just that I should buy a card reader cos I could do with getting my phone going again asap.

You got access to another phone which uses a micro SD? Could use that to put the zip onto the card.
Making a goldcard springs to mind as well
Sent from my HTC Hero using XDA App

Thanks for the tip, I had considered this already but I thought my brothers Legend (he doesn't live close) was my best bet. Turns out I had access to an N95 that did the trick

same problem
im a complete n00b
screen got replaced last month. new software was installed im guessing.
tried to use the tmobile ruu's to repair. there isnt one i can use though.
tried putting an engineering spl onto my sd card and using fastboot not really sure what happened there but it did not work.
does anyone have the appropriate update in zip format. not sure how i will get it to work but im trying all the things i read.
i do have backups but im not really sure what to do with them.
other than htc has anyone ever created an ruu?
mithdol

mithdol said:
im a complete n00b
screen got replaced last month. new software was installed im guessing.
tried to use the tmobile ruu's to repair. there isnt one i can use though.
tried putting an engineering spl onto my sd card and using fastboot not really sure what happened there but it did not work.
does anyone have the appropriate update in zip format. not sure how i will get it to work but im trying all the things i read.
i do have backups but im not really sure what to do with them.
other than htc has anyone ever created an ruu?
mithdol
Click to expand...
Click to collapse
What is the problem with urs exactly?

the problem is that im stuck in a cyanogen boot loop.
i have access to the generic fastboot only. therefore i have no ability to repair my phone from within the phone itself.
my phone is currently on hboot 1.76.0007.
i thought i had flashed clockworkmod. but for some reason or another beyond me it has disappeared.
the version of android i have running is 2.1, the tmobile version. the update number is 3.31.110.1. i understand that is the perfected spl version.
i have tried to fix using the ruu files. but i understand that the version on my phone as an ota update. therefore no ruu is applicable at this time.
i have tried many methods mentioned in various forums with no success.
thanks for responding to my post so quickly.
mithdol

Problem solved now
and the solution was so obvious............

...and what was that obvious solution? Because I'm facing a similar problem...
Thx in advance!

Keeep getting Error 260

I'm trying to reflash the stock WM ROM on my Vogue, but I keep getting Error 260 in the RUU. My phone is currently on an Android ROM (the latest Incubus26Jc's Super FroYo, which I installed yesterday) but I should note that the sdcard wasn't being read by Android, and my phone can't mount to be viewed on my computer.
How can I revert back to the stock ROM now?
Thanks for any help.

biomech91 said:
I'm trying to reflash the stock WM ROM on my Vogue, but I keep getting Error 260 in the RUU. My phone is currently on an Android ROM (the latest Incubus26Jc's Super FroYo, which I installed yesterday) but I should note that the sdcard wasn't being read by Android, and my phone can't mount to be viewed on my computer.
How can I revert back to the stock ROM now?
Thanks for any help.
Click to expand...
Click to collapse
Error 260 is a connection error (sorry for being so obvious). Can you post the exact steps that you are following to flash?

Haha yeah, I know it's a connection error. I've done many flashes so it's weird that it doesn't work anymore.
I press the power+camera+reset buttons to go into the tri-colour screen, plug in the phone to my computer, run the stock Bell RUU and then get the error.
Tried this at least 5 times now, restarted my computer a few times, tried different USB ports. No luck. =/

biomech91 said:
Haha yeah, I know it's a connection error. I've done many flashes so it's weird that it doesn't work anymore.
I press the power+camera+reset buttons to go into the tri-colour screen, plug in the phone to my computer, run the stock Bell RUU and then get the error.
Tried this at least 5 times now, restarted my computer a few times, tried different USB ports. No luck. =/
Click to expand...
Click to collapse
I had to ask since I needed to make sure that you were doing the right thing . You mentioned also that Android is not picking up your SD card. Try to put a nbh rom file in the root of your card (hopefully 2 GB or less), stick it in the phone and reboot into bootloader. The device should pick it up and try to flash from SD. If this doesn't work, then I am afraid that you may have a bad board in your phone.

egzthunder1 said:
I had to ask since I needed to make sure that you were doing the right thing . You mentioned also that Android is not picking up your SD card. Try to put a nbh rom file in the root of your card (hopefully 2 GB or less), stick it in the phone and reboot into bootloader. The device should pick it up and try to flash from SD. If this doesn't work, then I am afraid that you may have a bad board in your phone.
Click to expand...
Click to collapse
Ah, the thing is that the 512mb card that came with my phone stopped working the other day, so I've been using an 8gb one instead, and I'm too far from any computer store to go and buy a smaller one.
I did try the .nbh trick but I'm guessing the phone wasn't reading the card.

biomech91 said:
Ah, the thing is that the 512mb card that came with my phone stopped working the other day, so I've been using an 8gb one instead, and I'm too far from any computer store to go and buy a smaller one.
I did try the .nbh trick but I'm guessing the phone wasn't reading the card.
Click to expand...
Click to collapse
Try to get a 1 or 2 GB and see if that works. If it doesn't.... I think your phone may be toast...

Okay, I'll try that as soon as I can. Really appreciate the help! Thanks.

biomech91 said:
Okay, I'll try that as soon as I can. Really appreciate the help! Thanks.
Click to expand...
Click to collapse
No problem and good luck!

Phone Bricked?

I have a stock myTouch 3G 32B that won't progress past the initial login screen. I have taken pictures of the different screen/areas that I can get to. I have tried multiple SIM cards at no avail. Any help appreciated! Thanks!!

That is not a brick. Not even close to being a brick. Imagine this, you try to turn your phone on and you're greeted with the old familiar splash screen, but it stays like that, nothing happens, you start to worry and decide to boot into recovery, same thing happens, you freak out and try fastboot, same result. That's a brick. That doesn't happen to too many people, but when it does, its effing scary.
Now onto your problem. Are you sure the Sims you tried had working data? Did you try them in another phone to verify?

Thanks tvall ... I guess I should have used a different word that bricked since I know a true brick is completely non functional. This phone however is completely useless at this state though. :-(
As for the SIM cards, they were taken out of my HD2 (running Android), my wifes HD2 (also Android), Samsung Vibrant, and then a dumb phone. All the smart phones have data plans and work when their proper SIM cards are installed.

Well the phone suggested to call customer care, and it is a SMARTphone. Try taking its advice?
What I do when I have major problems is flash a sappimg and start over. (That is also the only times my phone runs stock software. I rooted on day one and flashed cm haven't gone back to stock)
Maybe, if your ok with root, do the goldcard rooting process and see if a custom rom can get data?

The phone was purchased used off craigslist ... wasn't sure if that would come up or matter if customer care was called. The whole point of this is that I was hoping to root and get a custom rom on there (trying to fix up for my niece to use). The problem is though that I don't think that I can root without a goldcard and I can't create a gold card without getting into the settings page and getting info about the phone (right?). If there is a way to do any of this using ADB or any other method I am all ears.
Also you said something about flashing a sappimg and starting over ... can I do this without the phone being rooted? It is 100% stock AFAIK.

NickPDX said:
The phone was purchased used off craigslist ... wasn't sure if that would come up or matter if customer care was called. The whole point of this is that I was hoping to root and get a custom rom on there (trying to fix up for my niece to use). The problem is though that I don't think that I can root without a goldcard and I can't create a gold card without getting into the settings page and getting info about the phone (right?). If there is a way to do any of this using ADB or any other method I am all ears.
Also you said something about flashing a sappimg and starting over ... can I do this without the phone being rooted? It is 100% stock AFAIK.
Click to expand...
Click to collapse
You can make a goldcard with any HTC android phone

tvall said:
You can make a goldcard with any HTC android phone
Click to expand...
Click to collapse
I was thinking that the gold card that is used to root the phone would have to be made with that phone as well. So I can use my G1 to make a goldcard that I can use to root this myTouch3G?

NickPDX said:
I was thinking that the gold card that is used to root the phone would have to be made with that phone as well. So I can use my G1 to make a goldcard that I can use to root this myTouch3G?
Click to expand...
Click to collapse
Yep. Goldcards are not phone specific

Thanks! I have never seen anything saying that in all of my research. I would have never figured that out on my own. I will create a gold card with my G1 when I get home from work and root that myTouch with it.
Thanks again!
Sent from my HTC HD2 using XDA App

[Q] HTC WildFire A3335 Qustion

I have a basic question,
I'm only asking because there's far too much
information available,
on here
and its not easy to find what best fits my
needs.
I have an unlocked A3335 wildfire ( Telstra NextG network 3g version), I'm using it on optus,
my boyfriend was useing it he dowloaded a
font change app for the phone,
but when he did it my phone went in to
bootloop mode.and keep't bootlooping again
and again
all i get is the start up screen,
with yes you guessed it
(Telstra NextG network 3g crap)
All I want to do is try and get my phone from
this bootloop mode and try and recover...
my phone back to how it was.
Its hard to explain,
ok when i go in to the boot screen
i have this on my phone
BUZZ PVT SHIP S- Off
HBOOT-1.01.0002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
DEC 27 2010,
17:49:10
and it reads the sd card,
it said the Boot Image. is missing
dont know why a app would take this out
but this is what happen
So Now when i did the fastboot on my phone
it done nothing,
then did the clear storge.
then i did the recovery
it rebooted to a black screen with A
triangle shape with one of these things
! in the middle of it,
but still stuck
I can follow the regular guides for rooting,
can any one help me to get my phone back to
how it was please
And I really don't care about this part much,
but would be nice to have it off the phone
and remove all the telstra junk and restore
the phone back to how HTC would ship it,
(all the junk apps they include could easily be optionally installed from marketplace if you want their crap...)
(obviously I'm in Australia also)
There are so many ROMS and options available,
including the ones from shipped roms
(it wont let me post the link because I'm new).
I just want my phone back to how i got it,
can any one help me please....
please send me a private messages,
with a step by step guide to do so thanks..

Since you are s-off u can use fastboot flash from windows to flash a clockwork mod recovery. After you do that, every thing will be simple. Just download a rom in zip format,put it to sd go to recovery( just do what you have done to see the triangle in blackscreen. Note that if u flash cwm you will no longer see that triangle). Then use your volume down button to reach install zip from SD card. Hit it with joystick press. Choose zip. Install it. Just do a data- factory resetting before you install zip.
I prefer cyanogen mod 7. U may use latest stable or nightly build. Feel free to post any doubt you have. We are happy to help you.
Regards shah.
Sent from my HTC Wildfire using XDA App

thank you so much your a life saver it work't have my phone back now yay

K. Be in touch with xda. Find out more. Make your wildfire yours and not htc's.
Thank u
Sent from my HTC Wildfire using XDA App

well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help

aussiegirl said:
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
Click to expand...
Click to collapse
nope that gold card image will send to ur email..and u need to copy that gold card image to ur sd card...

Well if the hboot is 1.01.0002 with S-OFF then it must be done using xtc clip. So fastboot flashing shouldn't be working. And u don't need a gold card for S-OFF wildfire .
I would just suggest to flash a stock froyo WWE RUU which also removes the carrier bloatware. If ruu proccess gives errors u can copy the romzip from that ruu and use it with pc49img process from hboot menu. And ofcourse fat32 memory card is must for pc49img process
Sent from my Blade using XDA App

Hey can you explain what happened now? You said that yours is working now before 2 days. ( in second last post). So what happened now? What have you tried with your phone?
And...
So the gold card question, let me explain.
Gold card is just a patch tool, with the help of which you can unlock HTC boot loader , or in detail, you can unlock HTC 's boot loader protection(that's what we call as s-off) , which is commenly locked( that's we call as s-on) , for a user mode phone( a phone that is for sale to normal user), and it is done so because a normal user never need a root permission, over clocking etc. Also user defined kernal,rom,radio updates unless HTC provide them with updates.( and of cource to protect their device and its custom os made by HTC.
So being an s-off device, we can say in simple, unleash the potential of android.( that's what i said, make the device yours and not HTC 's).
And s-off. In can be done using many ways, find them in topic " complete wildfire index " , one of which is using goldcard method. It is also explained in topic/ stickies " downgrade hboot to xxxx". You can download an attached file called buzz downgrade from that topic, and its what you all need.
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems), so you can use custom/ safe ruu, instead. Which contains no radio image, check " complete wildfire index" else go for custom os like cm7.
But before all you should mention what you need.
1) r u trying to put custom os, or do you need original os?
2) do you want your phone to be a true android gadget, or just normal phone which is provided by HTC?
3) what kind of user r u? Normal user or a tech junky?
4) r u satisfied with android 2.2 or need 2.3?
Get us the answers, along with your current boot menu( where you find recovery option) details. So that we can help you properly.
That's all dude. Its 2.30 am here in India, so i should wish myself a good night, swtdrmz. Cu ltr.
Sent from my HTC Wildfire using XDA App

showlyshah said:
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems)
Click to expand...
Click to collapse
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App

bharatgaddameedi said:
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
Click to expand...
Click to collapse
now im lost where do i fine the right one to use do you know how many there are out there this phone is doing my head in i try to flash the system.img and the boot.img and a stock rom and still nothing im ready to give up to be honest

Have you installed clockwork mod recovery? If not do it first. Use fastboot flash from windows or linux, then download latest cyanogen mod nightly and put it in your sd. Then use install zip option from cwm recovery to install cm7. Done. Its what you want. No radio harm will be done unless you flash a radio using any methods.
All info will be available on thread" complete wild fire index" in this forum. Tools, recovery, how to, rom, and every thing else are available in that thread.
Sent from my HTC Wildfire using XDA App

i have all of these things you said here what i dont understand i have tryed this so many times and still dosent work and its abit hard with work as i dont get much time to fix this phone for the past week has given me nothing but a pain in the rear end and its doing my head in...

ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand

aussiegirl said:
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
Click to expand...
Click to collapse

No expert but looks like you have an empty sdcard and system.I think you need to get a rom onto your sdcard (cm7 good choice) and then through recovery apply the rom. Zip and reboot after. DONT DO A WIPE.the telestra screen is just a splash screen which will always load before the system searches for data to load,next would be boot loading screen but yours by the looks and sounds of things does not achieve!! Probably cos its not present due to not having a rom installed.hope I helped if not best of luck. Members are very helpful here and cos you can access hboot I am 99% sure this will be fixed for you. Regards Slymobi.
Sent from my HTC Wildfire using XDA App

i have a rom on my sd card but the thing keeps saying FAILED? NO SUCH FILE FOUND ?

Download this: http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
Enter HBOOT.
Wait until it finishes trying to load a zip file.
Choose FASTBOOT to enter FASTBOOT USB mode.
Run the downloaded file.
It should then install the original HTC rom.

Or maybe try PC49IMG method if you haven't already?
On your PC click start and type in the search box %temp%,
Keep your eye on this folder and doubleclick your ruu, a new folder should appear in temp folder,
Open it and search for rom.zip,
Copy it to your desktop and rename it to PC49IMG.zip then copy to your SD card and boot into hboot, it should find the zip and install.
Sent from my HTC Wildfire using xda premium

@scratches post. I couldn't remember the method but that's exactly how I got my ruu to install so I could revolutionize.
Sent from my HTC Wildfire using XDA App

i have done that already still no go