[Q] Flashing issues - Nexus One General

Hey guys,
Had my Nexus for just over a year now, direct from google. i've been flashing roms and kernels for about 6 months, however since upgrading recovery to CWM 3.0 i've had nothing but problems.
Ive downgraded CWM to 2.5 and even switched to Amon RA 2.2.1, still having issues flashing.
Mainly themes, but alot of roms are refuses to flash too. leaving me stuck on the nexus X splash screen when switching on.
i've just flashed to cm6.1 and tried to flash an old theme i used to use, and even that failed. and im completely stumped.
I can only imagine that when flashing CWM through rom manager, it changed some other system files perhaps? Im not going to even pretend i can hold more than my own, hence this post, im stumped. does anybody know what may/could of happened? and what i can do to fix it?
Thanks in advance

http://forum.xda-developers.com/forumdisplay.php?f=603

when you wipe you do a complete wipe, /system, cache and all?
edit:
try and flash the zip from temasek signature.
http://forum.xda-developers.com/member.php?u=2332422

Try reflash the fastboot region on your phone
Sent from my Nexus One using XDA App

Related

Very Few ROMs or kernels work on my DHD

Basically, I have s-off and the official clockwork mod recovery installed. However, the same problems occurred with paul's version of custom recovery.
When flashing, I always go through the process of erasing all the partitions via mounts and storage, then i erase davlik cache and battery stats.
Then I install the ROM by the zip install.
And with kernels, I just install (not aware of any other steps that are needed)
But this is where I come unstuck. I am currently on RaiderX303's Cyanogen port. But I can't get any other roms to work. The same with kernels. Basically, flashing always completes with no errors, but then it crashes/stops at the second spash. So on core droid, it crashes on the android with a green circle going round it.
Anyone got any idea why this might be happening? Couldnt find any reference to it from anyone else.
Anyone got any idea?
tried getting clockworkmod from rom manager? the earlier version has a bootloop issue
I have the same problem with the Core Droid Rom, I believe its the kernal it has,some devices don't like it. The phone don't like the overclock, Infact not many do work on my device.
Sent from my Desire HD
rorydaredkign said:
Basically, I have s-off and the official clockwork mod recovery installed. However, the same problems occurred with paul's version of custom recovery.
When flashing, I always go through the process of erasing all the partitions via mounts and storage, then i erase davlik cache and battery stats.
Then I install the ROM by the zip install.
And with kernels, I just install (not aware of any other steps that are needed)
But this is where I come unstuck. I am currently on RaiderX303's Cyanogen port. But I can't get any other roms to work. The same with kernels. Basically, flashing always completes with no errors, but then it crashes/stops at the second spash. So on core droid, it crashes on the android with a green circle going round it.
Anyone got any idea why this might be happening? Couldnt find any reference to it from anyone else.
Click to expand...
Click to collapse
When you say erasing the partitions , do you mean wiping?, I personally would try installing ROM Manager from the market and letting that install the rom from SD, select wipe and backup before flashing and see if that helps at all, Can you flash the CM RC-1?
I can flash that and also the leeDroid and hd Rom. Just don't like the core Droid and buzz kernals
Sent from my Desire HD
yep I am installing by wiping, but on the last install I used rom manager and still the same problem. Just like vimto, I think it may be the Buzz kernel, so I will try a different kernel and see.
rorydaredkign said:
yep I am installing by wiping, but on the last install I used rom manager and still the same problem. Just like vimto, I think it may be the Buzz kernel, so I will try a different kernel and see.
Click to expand...
Click to collapse
There are some strange issues, camera not working for some of us on raiderx303's ROM, which seem to point to possible hardware variation I wonder if this is a symptom of the same issue?, CoreHD uses buzz kernel as default doesn't it?
But didnt you say you had issues with the MCR? that is based on stock rom so am surprised at that
Yep, I was thinking the same. Maybe EU/US difference. I think the Kaiser has about 4 versions didnt it?

Cant get passed boot animation screen

Rooted using unrevoked. Flashed to evio 3 and trying to flash different roms such as CM 7, or Decks 1.0 and it wont get passed the boot animation screen.
The animation keeps looping and I end up restoring it back to evio 3 with manual recovery mode boot.
I tried cleaning the caches before flashing and it wont work.
Flashed with different methods as well.. Rom Manager and manual install zip from sd on recovery boot menu..
Im new to flashing roms so please let me know if you see anything wrong in my steps. I have titanium back up, but I dont think I have my stock rom backed up for some reason..
Did you wipe EVERYTHING before flashing?
all the caches it specifies on the pop up from Rom Manager, yes.
I havent wiped it to factory, re-root and flash if that is what you are asking.
Ok, wiped everything and got it to boot into new rom but marketplace is gone and its functioning bad. apps arent working and I cant restore apps or contacts..
You need to flash gapps to get your market and other google apps - this will then allow you to sync your contacts, calendar, etc. There should be a link to it in the rom's thread.
(from... Evo/MIUI/Tapatalk)
feelingnerdi said:
Rooted using unrevoked. Flashed to evio 3 and trying to flash different roms such as CM 7, or Decks 1.0 and it wont get passed the boot animation screen.
The animation keeps looping and I end up restoring it back to evio 3 with manual recovery mode boot.
I tried cleaning the caches before flashing and it wont work.
Flashed with different methods as well.. Rom Manager and manual install zip from sd on recovery boot menu..
Im new to flashing roms so please let me know if you see anything wrong in my steps. I have titanium back up, but I dont think I have my stock rom backed up for some reason..
Click to expand...
Click to collapse
For the love of God do some damn research and learn something before you go and ruin your phone.
Sent from my PC36100 using XDA Premium App
Just go ahead and reinstall the RUU. Search on youtube for unrooting htc evo. I believe the video is from zedomax. Great tutorial for getting your phone back to stock.
And another one having problems, and using ROM Manger......

[Q] Stuck in boot loop after Flashing Liberty

I am in need of some help with my Droid 2 that I rooted and flashed. Everything was going smoothly up until I flashed the rom and now i am stuck at the Motorola M and in a boot loop. I have pulled the battery and tried to re-install and still nothing. I re-installed to sbf and tried the whole process over multiple times and still nothing. I have watched many how to videos even though this is my 4th time rooting a phone i know they are all different, and i seem to be doing all the right steps and no matter what i do im stuck at the Motorla Logo. Please help!
What are you flashing it from? Froyo? GB?
Sent from my DROID2 using xda premium
I've tried both medthods...Froyo originally. So I tried OTA to GB and then flash it...that didnt work either. What is the last sbf for the droid 2 anyway?
You should be on OTA GB when flashing it.
Check your MD5, lots of people seem to be having problems getting it to match.
Look at my thread on the Droid 2 Global section.. do steps 9-11 only.
http://forum.xda-developers.com/showthread.php?t=1060694
If you're flashing Liberty you can try using Rom Manager. Otherwise after you install GB and root, install Bootstrapper, run it's installation tab then recovery. Once in recovery wipe cache, wipe data, then select zip from sd and install.
Make sure you have the proper version of Liberty for your phone.
Hi, I am also having the same issue
I had Liberty 2.0 v2.0.1 and wiped data and installed from SD, stuck at splash screen
I pulled the battery and tried 2 more times, still same issue
Then I wiped the cached, wiped data and installed from SD and I'm still stuck at the splash screen, any help is greatly appreciated!
1) Try wiping davlik cache as well
2) Make sure you have the version of Liberty designed for your handset. It shouldn't flash anyway if it's the wrong one, but anything is possible.
Are you guys using Rom Manager or Bootstrapper by the way? Just wondering.
Also, if you're coming from a Rom already on there and you mess up you can use Clockwork to restore your last saved system image.

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Tylorw1 said:
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I don't see how that could be the case. I didn't flash anything. I just loaded TWRP, created a backup, and rebooted my phone. No ROM\kernel change. Nothing more than creating a backup in TWRP.
scott14719 said:
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Click to expand...
Click to collapse
I tried searching, the closest one I could find on the first few pages was this one. I just didn't see any specific to my situation because nothing was flashed. Like my response to Tylorw1, all I did was boot into recovery, create a backup, and reboot my phone. Didn't flash a ROM, change a kernel, format anything, etc...
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
STVERDI said:
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
TheAxman said:
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
Click to expand...
Click to collapse
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Simonzi said:
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
Click to expand...
Click to collapse
And you have to be ****ing kidding me. I rebooted into recovery while typing my initial response, just to verify I was still on the 2.5.x.x TWRP. Booted up TWRP, verified that, choose "Reboot System", and same thing. Back to sitting at the Samsung screen. Nandroid backups or not, ditching TWRP as soon as I get it able to boot back up.
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
somebody had mentioned this...
http://forum.xda-developers.com/showpost.php?p=44629460&postcount=8
make sure you have the correct firmware and proceed as you are. likely your best bet.
Simonzi said:
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
Click to expand...
Click to collapse
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
scott14719 said:
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
Click to expand...
Click to collapse
Yeah, I meant 1.6gb firmware package. Just forgot the "gb". That's what I'm currently downloading, but trying to recover it with Kies while waiting.
I would like to report I had the same problem.
After changing roms and making a nandroid, and then deciding to switch roms again, I ran into the stuck at Samsung Custom with a lock boot screen. Most roms would boot up once, but a restart or power down would lead to being stuck. I was flashing through TWRP.
I went into TWRP and flashed OUDHS recovery which overrode TWRP and wiped/flashed through OUDHS a new rom.
Problem solved.
S3 at&t stuck in TWRP booting screen.
xBeerdroiDx said:
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Click to expand...
Click to collapse
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Lnjames said:
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Click to expand...
Click to collapse
Wrong forum. Please go to the s3 section with your question.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Had this problem just now, solved it by fixing permissions.
I am running an MDL based S4, and screwed the pooch. I was going to wipe the internal storage and made the mistake of doing it through TWRP 2.5. Now, I have the same problem of being stuck on the custom boot screen. I have tried to change from TWRP to OUDHS Recovery, but still boot loops to Custom screen. I have tried fresh installs of 4.2 ROMs and 4.4.2 Google Editions. Do I need to flash via ODIN?
Flame away....I know better than this!!!!
Help would be greatly appreciated.
Sent from my GT-N8013 using Tapatalk 4

[Q] Help a noob, cannot boot after trying to flash stock rom

So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
rmngorelov said:
So I'm pretty desperate and I apologize if similar info was posted somewhere else. I've been researching several hours but couldn't find anything.
I originally installed CM11 and decided to experiment with a different rom TriForce ROM [TouchWiz]. I put the zip file on my SD card and booted into clockworkmod it gave an error of bad zip. I tried different usb port to transfer the zip, downloaded it multiple times with no result. So I decided to try a different rom Stock_Rooted_Deodexed_MF9_Rom.zip. The installation finished but the phone would not boot.
Recently I flashed the stock rom from odin, it finished successfully but still not boot, Galaxy sreen lights up quickly and that's it.
Click to expand...
Click to collapse
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware): https://mega.co.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
i7vSa7vi7y said:
Restore from nandroid backup. I hope you made one. Try going into recovery do a factory reset and wipe all cache and data and what not and then install a ROM from Odin.
Click to expand...
Click to collapse
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Does it matter that I can't get into recovery to clear the cache first before trying new roms?
silentdeath631 said:
Make sure you're using roms for your version of your phone. the MF9 bootloader is really old and probably wont install anymore. My phone did this before and I thought I bricked it, but I kid you not I took the battery out and removed the SIM card and rebooted and it booted up just fine. May not work for you, but I suggest you go back to update stock firmware then try again. If you're using the triband model, there's a post around here somewhere with confirmed roms that wont brick your device. I'm currently using the Google Play Edition Stock ROM and it's working GREAT.
Link for new firmware (NG5 Firmware):
Click to expand...
Click to collapse
Maybe I'm doing something foolish but every time I try to download files from the link you gave I get a decryption error so I can't download them zip or original.
rmngorelov said:
I restored to this stock ROM before and everything worked well. Currently I can't boot into recovery, Samsung flashes once and that's it, that's why I'm desperate the only thing I can do is boot in to download mode for odin.
Click to expand...
Click to collapse
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
i7vSa7vi7y said:
Just hold home power and volume up. Right when you see text at the top left let go. You have to have the right timing
Click to expand...
Click to collapse
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
Depends what recovery you had and what version. I personally like Philz touch recovery but TWRP is good. Now wipe and flash a ROM my friend or restore a backup
rmngorelov said:
After almost eight hours of troubleshooting I finally got it to work.
I've tried flashing clockworkmod several times to see if I could get into recovery with no result so I gave up on that and I flashed the newest stock rom I could find L720VPUFNG2_L720SPTFNG2_SPR and it was still not booting. Than I thought maybe twerp would make a difference and god almighty it finally booted! I felt as if I gave birth to a child after eight hours of labor!
Now I'm extremely paranoid about touching anything because it took me forever to do this. Does anyone know why flashing twerp would make such a difference? I know this sort of stuff can get extremely complicated but I'd like to try to understand.
I hope my foolish agony contributed to this community if not in any other way except by the comedic relief caused by my ignorance.
Click to expand...
Click to collapse
im having similar issues. which version of TWRP worked for you?
thank you
fearthemarchx said:
im having similar issues. which version of TWRP worked for you?
thank you
Click to expand...
Click to collapse
I recommend flashing the newest one here using odin
http://teamw.in/project/twrp2
Then once you are able to boot into recovery go to wipe and perform both factory reset and format data. Then install whatever rom you like, I used Sprint Galaxy S4 SPH-L720 VPUFNAE (Androdi 4.4.2) found here
http://galaxys4root.com/galaxy-s4-stock-firmware/ (or maybe find a newer stock rom if this one gives you errors)
Just copy the zip file to the phone, boot into twrp, do wipe factory reset again, select install then select the zip in whatever directory and you should be good to go. Make sure you do a back up in twrp once you get the phone to boot so you can always revert to stock.
I hope I was thorough enough that some of the information was useful. Let me know if you need any more help.
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
only certain recoveries will stick. ive tried the most recent twrp, with no luck. only a few versions of philztouch work.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
Format with philztouch that works then try flashing a new stock rom with odin. That should bring everything back to stock including the recovery.
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
fearthemarchx said:
ive tried. when i flash rom via odin i only get a blue "recovery booting" at the top of boot screen. even when i only power on, not into recovery. im going to attempt to flash rom provided in previous post via philz.
Sent from my LGL34C using XDA Free mobile app
Click to expand...
Click to collapse
You're in download mode when you flash from odin right? If you your getting an error flashing, try a different stock rom after reformating/resetting to factory (it's crucial to clear the cache before trying a different rom). I had to try a few roms before I found one that worked.

Categories

Resources