My glacier is not being recognized by my pc. I have reinstalled all of the windows drivers from HTC, rebooted pc, tried a different usb port, even tried re-flashing the CM7/RC4 update, but the problem persists.
My next option would be to wipe/reset-reflash-then restore settings. But if I do that, I want to make I sure I don't accidentally restore the corrupt file... Does anyone know where this phone driver (or the file that is causing this error) is on the phone so I can avoid restoring it?
Sent from my HTC Glacier using XDA App
syntropic said:
My glacier is not being recognized by my pc. I have reinstalled all of the windows drivers from HTC, rebooted pc, tried a different usb port, even tried re-flashing the CM7/RC4 update, but the problem persists.
My next option would be to wipe/reset-reflash-then restore settings. But if I do that, I want to make I sure I don't accidentally restore the corrupt file... Does anyone know where this phone driver (or the file that is causing this error) is on the phone so I can avoid restoring it?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
That issue has nothing to do with your phone unless the actual usb port went bad.
This is definitely a computer issue.
option94 said:
That issue has nothing to do with your phone unless the actual usb port went bad.
This is definitely a computer issue.
Click to expand...
Click to collapse
Well, its not like I have any reason to not believe you, but, I guess thinking it has to do wih the phone gives me a bit more hope.
Honestly, I don't know what could have happened. It was working fine maybe a week ago, and now no matter what I do, windows says its not recognized...specifically windows says "device not recognized, try re-plugging the device back into the usb port. If it continues to not work, replace the device" (yeah right...i think I will pass on windows' suggestion in this case).
I have also tried reinstalling the usb laptop filters/drivers too. I am thinking it has to be something obvious because I have not done anything unusual since it worked properly.
Sent from my HTC Glacier using XDA App
So do you have the SDK set up then? You can also try setting up adb with the method found in my signature. Have you tried a battery pull and then see if your device is recognized through adb?
TrueBlue_Drew said:
So do you have the SDK set up then? You can also try setting up adb with the method found in my signature. Have you tried a battery pull and then see if your device is recognized through adb?
Click to expand...
Click to collapse
Do you mean just pull out the battery, but plug in the (mini) USB and try and get adb to work?
By the way, its not adb exactly which had the problem. ,Its just that suddenly, windows is stating it doesn't recognize the device..(code 43 in device manager properties). I didn't do anything (i don't think), and its driving me crazy. I have not pulled the battery yet, but I have retried just about every other driver install/reinstall.
Sent from my HTC Glacier using XDA App
syntropic said:
Do you mean just pull out the battery, but plug in the (mini) USB and try and get adb to work?
By the way, its not adb exactly which had the problem. ,Its just that suddenly, windows is stating it doesn't recognize the device..(code 43 in device manager properties). I didn't do anything (i don't think), and its driving me crazy. I have not pulled the battery yet, but I have retried just about every other driver install/reinstall.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Just pull out the battery and put it back in and power up.
So when you say it wont recognize it, you mean as a external storage device then? That could be a SDcard issue but sounds like a PC issue. First thing I would do is see if your device is recognized in adb. Follow the link in my signature if you dont allready have adb set up. That should tell you if your usb is functioning also. If that all goes well, I would check your SDcard and make sure your issue isnt there.
Ok... Just ask me... No, it its not recognized in ADB, nor is windows liking it.
Windows sometimes says "USB DEVICE HAS malfunctioned". When trying PDANet drivers, I get error =103. I dint know how ADB FEELS as there is no feedback, but I have started ADB, ran adb devices, nothing listed, I have toggled USB debugging just to see what would happen, and I can tell the device us being disconnected and reconnected (based on audible alert), but otherwise, same as always.
I am starting to think it is the SD. And that maybe I dropped it a few feet on to the carpet or something mild like that, and I need to re-seat the SD. Sound logical?
Sent from my HTC Glacier using XDA App
I don't seem to be making any progress whatsoever. I really need to get this phone recognized because I ned to do some boot animation and splash screens
As said, I have tried everything possible with driver installation and uninstallation, both using revo-uninstaller and the device manager. Does anyone think it might possibly be the phone our could this only be a windows issue?
Does anyone have any more possible suggestIons?
Sent from my HTC Glacier using XDA Premium App
Related
My HTC Hero CDMA Cellular South, the USB doesnt work what so ever. When I plug it in I get no message or sound of it connecting and it just starts charging. Its a stock ROM, on 2.1.... any help? I have tried rooting the device before but quit before doing any flashing of the ROM because of the lack of information of the tutorial I was following. Please guys I really want my usb back
So your phone charges when its plugged in? But you cannot connect it to your computer to mount the sdcard. You may want to try running the RUU in fastboot mode.
unCoRrUpTeD said:
So your phone charges when its plugged in? But you cannot connect it to your computer to mount the sdcard. You may want to try running the RUU in fastboot mode.
Click to expand...
Click to collapse
Could you tell me what exactly this does and how I can do it? RUU im pretty sure is the updater, am I updating the ROM again to maybe fix the problem?
Update: I checked the USB cable and swapped in a different cable and everything is working just fine. Sometimes it's the simple things!
I'm having the same problem on my Sprint Hero, running CM6 with Kernel #14. I just loaded kernel #14 last night and this is the first time I tried to use USB access.
It's like it's not connected to the computer...but it is charging.
Ive already tried a differnt usb port and cable so, how can I reflash my rom without usb support?
jwhistler said:
Update: I checked the USB cable and swapped in a different cable and everything is working just fine. Sometimes it's the simple things!
I'm having the same problem on my Sprint Hero, running CM6 with Kernel #14. I just loaded kernel #14 last night and this is the first time I tried to use USB access.
It's like it's not connected to the computer...but it is charging.
Click to expand...
Click to collapse
Okay, I just got done putting GodSpeed Recovery on my hero and toggled the usb and im still getting no indication of the usb working on my computer
You might want to look through manage applications in settings or some where in settings and clear the default for what to do when you plug your phone in.
Do you have a wireless router. You could install adbwireless from the market and get stuff to and from your phone.
Have you tried it on a different computer
You might want to delete the drivers on the computer for your phone, reboot computer and then plug the phone back into the computer and let it load the drivers.
Sent from my HERO200 using XDA App
unCoRrUpTeD said:
You might want to look through manage applications in settings or some where in settings and clear the default for what to do when you plug your phone in.
Do you have a wireless router. You could install adbwireless from the market and get stuff to and from your phone.
Have you tried it on a different computer
You might want to delete the drivers on the computer for your phone, reboot computer and then plug the phone back into the computer and let it load the drivers.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I have tried everything, I have reinstalled drivers used 3 differnt computer with 3 differnt operating systems. is there a way I can reflash the ROM without it being connected to the computer... say my sd card...?
I just hard reset the phone and still nothing...
When you connect your phone and do
Code:
adb devices
do you get anything?
I had this very same problem a few weeks ago. I was using the original usb cable that came with the phone when i got it back in march. Simply trying a new "stronger" looking cable did the trick for me.
Although, I think you have already tried this.
unCoRrUpTeD said:
When you connect your phone and do
Code:
adb devices
do you get anything?
Click to expand...
Click to collapse
What is adb devices? I get nothin when i connect it to my pc. My pc detect nothing when i go and look in device manager and my phone just start charging. Ive tried a differnt cord differnt os, differnt computer, sd card, etc.. Please help im really doubuting I will fix this and this is the only phone im going to have for a while.
adb is a program found in the android sdk. Do you have the android sdk setup on your computer? Are you rooted?
Sent from my HERO200 using XDA App
So I can't connect my phone to any Windows PC as it says: USB device not recognized.
I tried Samsung drivers for Galaxy S phones and for the Epic 4G from three different locations and Samsung Kies and I still can't the connection to my SD card to work.
Also Odin will not recognize the phone at all either on any PC.
That is fine I can still download things on my phone with Wireless Transfer Pro application, but how can I flash the modem or install CWM without any direct connection to the phone?
Right now I'm running CWM 2.5. I want to put 3.0.25 on it and then flash the ee03 baseband and then reinstall a ee03 ROM since the one I'm currently using is being flaky.
smryan said:
So I can't connect my phone to any Windows PC as it says: USB device not recognized.
I tried Samsung drivers for Galaxy S phones and for the Epic 4G from three different locations and Samsung Kies and I still can't the connection to my SD card to work.
Also Odin will not recognize the phone at all either on any PC.
That is fine I can still download things on my phone with Wireless Transfer Pro application, but how can I flash the modem or install CWM without any direct connection to the phone?
Right now I'm running CWM 2.5. I want to put 3.0.25 on it and then flash the ee03 baseband and then reinstall a ee03 ROM since the one I'm currently using is being flaky.
Click to expand...
Click to collapse
With phone unplugged, go into device manager and delete everything samsung, sprint, epic, google, android, adb or galaxy s. With phone still unplugged, install the galaxy s drivers, reboot, plug on phone.
Sent from my SPH-D700 using XDA App
Firswt thing I will always ask is did you turn off anti-virus and firewall. After that I will answer any question I can field.
There's a flashable zip for the new cwm but as far for the modem u can't flash it with cwm at the moment.
Sent from my Epic S 4G using XDA Premium App
The Root said:
Firswt thing I will always ask is did you turn off anti-virus and firewall. After that I will answer any question I can field.
Click to expand...
Click to collapse
Yeah my windows firewall is off and antivirus (windows security essentials) process is gone.
I just need to know where to get the correct drivers so Odin will work. I do the 1+power key to get to the yellow logo screen but it won't detect the phone.
I already uninstalled anything samsung usb related in my add/remove programs.
smryan said:
Yeah my windows firewall is off and antivirus (windows security essentials) process is gone.
I just need to know where to get the correct drivers so Odin will work. I do the 1+power key to get to the yellow logo screen but it won't detect the phone.
I already uninstalled anything samsung usb related in my add/remove programs.
Click to expand...
Click to collapse
Try device manager. Install drivers before plugging in phone. Look at my new thread.
Sent from my SPH-D700 using XDA App
smryan said:
Yeah my windows firewall is off and antivirus (windows security essentials) process is gone.
I just need to know where to get the correct drivers so Odin will work. I do the 1+power key to get to the yellow logo screen but it won't detect the phone.
I already uninstalled anything samsung usb related in my add/remove programs.
Click to expand...
Click to collapse
Where are the drivers you got from? and if so, have you uninstalled them yet?
The Root said:
Where are the drivers you got from? and if so, have you uninstalled them yet?
Click to expand...
Click to collapse
I got one here:
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
And the other here (64-bit: I have Windows 7 64-bit)
http://forum.xda-developers.com/showthread.php?t=728929
smryan said:
I got one here:
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
And the other here (64-bit: I have Windows 7 64-bit)
http://forum.xda-developers.com/showthread.php?t=728929
Click to expand...
Click to collapse
Look at my drivers post. It gives the correct ones.
Sent from my SPH-D700 using XDA App
marcusant said:
Look at my drivers post. It gives the correct ones.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Ok i'll try those. And yeah, I uninstalled everything from device manager and add/remove programs that relates to the phone.
So I installed those drivers, restarted my computer, turned off my phone and then pressed 1 + power to get to "Downloading... Do not turn off Target!!!!" screen, loaded up Odin, and plugged my micro USB cable in to phone and computer and it still gives the the error "USB device not recognized"
The cable used still charges my phone, do you think its a bad cable?
Esteway.619 said:
There's a flashable zip for the new cwm but as far for the modem u can't flash it with cwm at the moment.
Sent from my Epic S 4G using XDA Premium App
Click to expand...
Click to collapse
Can you give me the link to this please?
Try another cable or another usb port if in front try one in back or vise verse.
smryan said:
Can you give me the link to this please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1115999
Here u go buddy
Sent from my Epic S 4G using XDA Premium App
try it without the battery in... or wise up and ditch odin, learn heimdall
tazfanatic said:
Try another cable or another usb port if in front try one in back or vise verse.
Click to expand...
Click to collapse
This one ^
Sent from my SPH-D700 using XDA Premium App
smryan said:
So I installed those drivers, restarted my computer, turned off my phone and then pressed 1 + power to get to "Downloading... Do not turn off Target!!!!" screen, loaded up Odin, and plugged my micro USB cable in to phone and computer and it still gives the the error "USB device not recognized"
The cable used still charges my phone, do you think its a bad cable?
Click to expand...
Click to collapse
1. if you're using the factory Samsung cable, toss it and get a good cable.
2. If you still can't get any of the drivers to install or work properly (I couldn't either, I'm running Win7 Ultimate 64 bit).. find and install PDAnet. Select Samsung, follow all instructions carefully during install. You can un-install it when you're done but this was the method that involved the least drinking to accomplish for me.
If this helps (or any members suggestion for that matter) remember to hit the thanks button.
Thanks guys. It turned out the original Samsung cable was bad. It could still charge but for whatever reason it could not connect to the phone's SD card over USB.
hey guys,
I don't know if this still a problem with people. but I'm on win7 64bit and I can't seem to connect my nexus s, to my computer. I always have to upload from computer to dropbox then download the file from DB on my phone... usb plug doesn't work. I tried the same cable with my wifes Samsung vibrant and it recognizes it, but when i plug in my nexus s the debug icon shows up on my phones status bar for like 1 second and disappears. then window on my compter says "USB Device Not Recognized"
need help please.
What does it say in device manager (in windows)? Maybe the driver is wrong...
Sent from my Nexus S using XDA Premium App
do u have a right drivers installed
have a look here and check Google USB Driver
I'm having the same problem. I have tried both my computers and multiple cables but I continue to get the error. When I try to update the drivers or reinstall them Windows says the drivers are up to date. I've tried every USB port on both computers as well.
I even took the phone into a repair place to see if perhaps the USB port on the phone was malfunctioning and they couldn't find anything wrong with it.
solarus2011 said:
I'm having the same problem. I have tried both my computers and multiple cables but I continue to get the error. When I try to update the drivers or reinstall them Windows says the drivers are up to date. I've tried every USB port on both computers as well.
I even took the phone into a repair place to see if perhaps the USB port on the phone was malfunctioning and they couldn't find anything wrong with it.
Click to expand...
Click to collapse
Try installing pdanet, I had a similar issue when I rooted my ns and installing the pdanet drivers solved the problem.
Sent from my Nexus S using XDA App
I've been having the problem also and none of the fixes worked. Not even PDA net. You'd think that the more people have this problem so one would have found a real fix by now.
pnnorth said:
Try installing pdanet, I had a similar issue when I rooted my ns and installing the pdanet drivers solved the problem.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I can't get the PDAnet drivers to install - during the installation process, my phone has to plugged in, which of course the installation program can't see.
Weird thing is if I remove the battery and then plug the usb in and start the phone, the drivers show up in the device manager but they always disappear before I can unlock the phone - appears the USB connection on my Nexus S is broken...can;t think of anything else.
Problem:
my darn phone won't boot unless I use same battery. I can't get my laptop to recognize phone even in boot loader mode. The only way I can boot phone is to battery pull or plug it in. I'm stuck. Can't odin without pc seeing it, wives phone works great same pc same cable same batteries. Can't shut it off as plugging it in reboots it.... Can't do usb storage....
Tried:
1) I installed several roms after clearing everything, factory reset, and nothing works. I even reinstalled clockwork. Please help.... 2) my wived phone works with my pc and other batteries.
3) wives phone on same rom
4) I have same issue from stock rom or my current rom clean gb even without any personal apps or changes
Please help.
Sent from my SPH-D700 using XDA App
Try putting it into download without a battery. Have Odin ready, plug in usb cable without battery in then put it into download mode. Odin in EC05 stock tar, then root and flash after that.
Sent from my SPH-D700 using XDA App
Dang..... Nope..... Pc doesnt reconize.....i had fingers crossed.. Hummm.. ItS like phone is stuck in some sort of boot mode....
Awhile back i deleted the boot animation and shutdown animation files... I wonder if that did something. Since then clean gb rom has installed new animations files which work..
Sent from my SPH-D700 using XDA App
Not to sound dumb, but are you using the same cord as your wife to try and make transfers? I have a computer in my living room, with 2 different USB Cords that my wife and I use for charging in the evenings. One of them connects to the computer properly, the other is unreliable for data and wont ever recognize a phone attached to it. Figured I'd ask so you can rule that out.
Also if the USB port is plugged into a hub, or front of the PC, try moving it to a USB port in the back of your PC that is directly attached to the motherboard. Also make sure there is nothing inside your phone USB slot. I have had some crap get in there (hence the slider on top I NEVER close when I unplug it, ) and it wouldn't connect to PC either.
These are both obvious solutions but we might as well try and start there. Let me know. I'd say uninstall/reinstall the drivers on the computer also, but if one phone works, and the other doesn't so it's not the drivers.
I had a similiar problem where my GF's phone connected fine with USB debugging on but my phone wouldn't. Tried goin back to stock...everything. Finally just put USB debugging on, plugged my phone in, went to Device Manager and where it said Samsung Android, I hit update drivers from Windows Update. Took like 20 minutes but everything worked fine after that.
I am using same chord and port as I did with my wives phone. Good question. I cleaned the contacts in the usb port still nothing. I had usb debugging on... Just tried it with it off nothing.... I really think I may have garbage data or something messing it up. When I installed ask these roms over the last year I only cleared data like once every 10-20 rom loads our when the rom did it itself. I've never had any issues til now.
Sent from my SPH-D700 using XDA App
Did you reinstall all 5 drivers and then try to Odin back to stock with battery out?
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Dumb question.... is your wives phone the same phone as yours? ..... try going to the samsung website. Navigate to your phone and you can grab the drivers from there....
That's how I got mine.
Sent from my Cyanogen Epic.
troyolson92 said:
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If it comes up as unknown device then you'll need to go into the device manager and unistall the software for it. Then advance install the drivers for the unknown device it should then recognise the phone and install the Samsung usb composite device, gadget serial control, and the Samsung mobile Modem. Hope this helps
Sent from my OG Epic
Try these drivers may make a difference its for win 32 bit
Thank you and every one for your help! I will try to install the driver file you attached. I do appreciate your help.
wife has same phone exact same setup as mine. What keeps driving me crazy its her works fine, mine is unknown device. I will try to install drivers again as suggested.... I'll report back in the morning,.thank you!
Sent from my SPH-D700 using XDA App
Yeah seems like wth its the same phone ^^. But make sure you open the zip and get the drivers out. Let me know if that works I've seen this problem with certain computers it has something to do with itunes sometimes I'm sure you have itunes and if you don't then its windows sometimes needs to be reinstalled.
Sent from my OG Epic
Samsung Galaxy S2 Stuck in ODIN Mode
I too have a similar issue.
My Sprint Samsung Galaxy S2 fails to connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
ODIN MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
Any ideas?
Perhaps you can ask in the correct Epic Touch thread instead of the Epic with the keyboard thread. More likely someone there will be able to help you.
Sent from my SAMSUNG-SGH-I717 using xda premium
Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Still kinda a noob so I may sound stupid for this but do u have the correct drivers for the phone installed on your computer
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
virakcam said:
Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Click to expand...
Click to collapse
Is it possible that you disabled the pop up?
If it doesn't seem to be a software problem, have you tried using a different USB cable? This would be the most likely problem for you, in my opinion.
Sent from my HTC Amaze 4G using Tapatalk 2
Well, before connect to each other normally. I am not sure what I did wrong with it. I did try various cable. But still the same. I will try to install the Driver again. Thanks for your suggestion.
virakcam said:
Well, before connect to each other normally. I am not sure what I did wrong with it. I did try various cable. But still the same. I will try to install the Driver again. Thanks for your suggestion.
Click to expand...
Click to collapse
The driver came on the root of you sd card when the phone was new. If that doesn't work try pdanet
Sent from my MyTouch 4G using xda app-developers app
Well, I already tried all these ways. Still not working. I even try to restore to the previous back up that the SD card is working by that time. But nothing happen still. Look like it is a hardware problem.:laugh:
Have you looked at the device manager for devices with an exclamation point? Make sure you have the "show hidden devices" checked.
On your pc re-install the phone driver but first uninstall the original driver through control panel>programs. After the uninstall, plugging in your phone to your PC should bring up the unknown device pop up (then the new hardware installation dialogue). If not then the pc isn't picking up your phone, check the cable, maybe try a different cable/ usb port.
If all else fails, some mytouch custom roms on these forums borked usb, there was a workaround for that, something you could flash. I remember seeing it in some of the threads... Wish I could remember the name. It was around Cyanogen 7.1 mods/ports (before rc 7.2 was out). Maybe somebody else remembers..
Sent from my Frosted Cherry ParanoidAndroid v 1.5a3
It could be a failed USB connector in the phone. Much, much higher probability than "borked USB". Especially if he installed several custom ROMs and didn't have anything.
Very easy to tell:
Boot to bootloader (power off, then power on + Volume Down), choose "FASTBOOT" (with VolDown and Power buttons), connect USB. If you'll see "FASTBOOT USB" showing up instead of "FASTBOOT" - it means USB is working. If not - most likely USB plug in the phone is dead, or something wrong with your computer's USB ports.
you need to install the HTCdriver before connected the myTouch to computer. I think I downloaded it from the official myTouch 4g website, some mytouches have it in their sd card...
virakcam said:
Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Click to expand...
Click to collapse
windows update woud install your drrivers if u need more help pm me
Jack_R1 said:
It could be a failed USB connector in the phone. Much, much higher probability than "borked USB". Especially if he installed several custom ROMs and didn't have anything.
Very easy to tell:
Boot to bootloader (power off, then power on + Volume Down), choose "FASTBOOT" (with VolDown and Power buttons), connect USB. If you'll see "FASTBOOT USB" showing up instead of "FASTBOOT" - it means USB is working. If not - most likely USB plug in the phone is dead, or something wrong with your computer's USB ports.
Click to expand...
Click to collapse
Hi, I've tried your suggestion. And the Fastboot USB didn't pop up. So that mean something wrong with it. Do you have any solution for this. Appreciate your help.
If no "install driver" or "unrecognized device" popped up at the computer - just to be sure, try a different computer. If still nothing pops up on the computer - it means you have to fix the USB socket of the phone, and it means you have to submit it to a lab (unless you're good with micro-soldering and have all the tools, including microscope - but it doesn't seem to be the case). It's a physical problem, and can't be solved with software - no builds/ROMs/etc can make metal contact
Jack_R1 said:
If no "install driver" or "unrecognized device" popped up at the computer - just to be sure, try a different computer. If still nothing pops up on the computer - it means you have to fix the USB socket of the phone, and it means you have to submit it to a lab (unless you're good with micro-soldering and have all the tools, including microscope - but it doesn't seem to be the case). It's a physical problem, and can't be solved with software - no builds/ROMs/etc can make metal contact
Click to expand...
Click to collapse
You are right. I think it is the hardware problem too. Because I just got a Micro USB port broken and I went to the phone repairer to fix it. After I got it back for a couple day and flash new ROM. The USB is no longer working. Will return it to them.
Thanks for your time
I had the same problem. I just formated the system and then flashed the same room and that worked for me. Hope it helps
Sent from my HTC Glacier using xda premium
INFINITYandONE said:
I had the same problem. I just formated the system and then flashed the same room and that worked for me. Hope it helps
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
virakcam said:
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
Click to expand...
Click to collapse
FLASH THE STOCK RUU this should fix all your problems.
http://forum.xda-developers.com/showthread.php?t=1074355
and post back
tawhid111 said:
FLASH THE STOCK RUU this should fix all your problems.
http://forum.xda-developers.com/showthread.php?t=1074355
and post back
Click to expand...
Click to collapse
What is this by the way? Is it the orignal ROM from tmobile? I already tried this event before you suggest me but it doesn't work either. Thanks.
virakcam said:
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
Click to expand...
Click to collapse
R u trolling? Because if u can mount USB in recovery USB should be fine. Unless its your PC or some files on ur phone r corrupted. Try fastboot comnand. Fastboot OEM enableqxdm 0