[Q] Bricked M2 trying to upgrade to 2.3~ - Milestone 2 General

EEEP! I'm a dummy~ I tried flashing to TBH's 2.3 without realizing it was for Droid 2 only and now my M2 won't start up. When I press the power button I brief get a Motorola Logo but then the screen goes blank.
I am able to start the phone in bootloader mode and interface via RSD Lite but I can't seem to find the right SBF to get things back on track again.
I've tried the UK 2.2 version, as well as the defy 2.2 boot only without luck. . . I don't actually know what region my phone is form since I purchased it unlocked from an online vendor and since I can't start up the phone I can't check for certain.
any help would be much appreciated >eeks<
I

I did wonder what would happen if I did this myself, thanks for being the guinea pig, but sorry about your situation.
Which version of RSD lite are you using?
I don't know for sure, but I had assumed that any region SBF would work.

After flashing any MS SBF (UK 2.2 one is fine) make sure you clear your cache partition (power on phone holding X until ! appears, then press @, navigate to and clear the cache)

Shellite said:
After flashing any MS SBF (UK 2.2 one is fine) make sure you clear your cache partition (power on phone holding X until ! appears, then press @, navigate to and clear the cache)
Click to expand...
Click to collapse
And don't forget a factory reset! This will format the /data partition, but you'll be sure left with a stock situation.

good news guys~
i contacted motorola and found out my phone is not from hong kong but from switzerland . . . i had assumed it was hong kong-ese because my M1 was from HK and I bought my M2 from the same vendor.
Anyways . . . I was able to flash the CH Sbf (FYI: some forums say the CH is for Cech Republic, it stands for Switzerland) using RSDLite and now everything is hunky dory . . .
except my Y and Z are switched but it's better than a fancy, shiny brick =)
Checking through the keyboard layouts now to see if I can edit the registery to correct the layout.

Related

[HELP] Milestone 2 bricked (SBF Not Working, No Recovery, No Battery Charge)

Hey i will try to be as precise as possible. I'm posting in this section because in the general section the help isn't as effective as here.
Here is my problem:
A few days ago i flashed GB MIUI on my Milestone 2 everything worked perfectly and i used the phone a whole day. That night i've put the phone to charge and went to bed. Il the morning when i push the power button the phone didn't boot. I was stuck at the first M bootscreen (Red at the time).
I wasn't able to do anything no recovery the phone didn't seem to be charging so i decided to flash Stock FR SBF (One i used many times)
Once completed i let the phone tying to Boot for about one hour. After that i pulled the battery out and tried to get to recovery but no success. Holding the X button while booting wasn't getting me to recovery because the wouldn't get pass the First Moto bootscreen (Recovery open after that).
So i've flashed since then a handful of SBF from and-developpers:
2.2 FR
2.2 CH
2.2 UK
2.2.2 FR
2.2.2 CH
2.2.2 UK
2.2.2 Hong Kong
2.2 China
Official GB Leak signed
Still wasn't able to get throught the first moto bootscreen.
r2beta0 had an idea so if someone can please help me get through this. I think i'm done with flashing things...
r2beta0 said:
Hmm, I just had an idea that needs elaboration. As we know we can flash any partition of the phone using sbf_flash or RSD Lite. If his problem really can be solved doing a data wipe it would be also solved by flashing a new "empty" CG37.smg. It doesn't need to be signed because /data is not checked by bootloader. So, we need a Milestone2 /data empty image (CG37.smg). One could do a data wipe and take the image of with dd command, but it would be a HUGE file (6,5 GB). I don't know if we can use a smaller file just to clean his /data. Maybe someone can elaborate that.
Click to expand...
Click to collapse
dangpzanco said:
Maybe you can flash a modded SBF, with a modded CG37 and a new CG that points to addresses from the middle of data to its end, and make two partitions with data spare space for the dual booting project, is that even possible?
Well, at least when you pack and zip it the SBF won't be hard to upload.
PS: Does the Milestone 1 full SBFs have the data CG included?
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I tried holding X button while i plug the phone the Wall charger but no sucess either. I just can't get to the screen with the Exclamation point...
I've tried to be as precise as possible to help people who will or already tried to help me. Please don't delete my thread or move it after i've put so much effort in this...
I've search in hundreads of threads around different forum XDA is my last chance...
I thanks everyone who will take some time to help me or even at least read this.
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I just did it no results still the same!
I don't think it looks good.
I didn't pull out the battery yet i wan't to give it a chance. I'll edit this post
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
r2beta0 said:
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Click to expand...
Click to collapse
Emacore said:
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
Click to expand...
Click to collapse
I removed the sim card removed the sdcard, charge the battery with a milestone 1 avec two different charger. No results
@r2beta0 i think you are right i'll wait i someone help me until tomorrow evening if not i'll send it back to moto.
Have you tried to use sbf_flash on linux/mac?
Sent from my Milestone 2 XDA App
I think i'm going to try that. Will report later
r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I have the same probleme .... And this don't work for me too.....
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
EVEALEX62 said:
I have the same probleme .... And this don't work for me too.....
Click to expand...
Click to collapse
I've tried Linux but no result... We are 3 french who have the exact same probleme it can't be Hardware?
Our Milestone 2 are somewhat different than others... I've phoned motorola for my problem today they told me to send it to a partner repair center but he warned me that if they discover i did something to the phone it will cost my a lot of money...
I'm sending it monday morning i'm really hoping for a solution before than...
Im not sure about service sbf vs the one that wipes user data. We have that kind of sbf for m2?
On the other side, looks like ROM chip go bad.
I'll ask some obvious question...you did not have any errors when flashing ? it always complete the process? Can you get into the bootloader when it print version 70.12 or 70.13 ?
Another obvious thing, did you verify md5 after downloading sbf ?
pat972 said:
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
Click to expand...
Click to collapse
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
EVEALEX62 said:
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
Click to expand...
Click to collapse
So it happenned both to us when we intalled MIUI so the problem is MIUI. Because i was using CM7 since Endless7 post the instruction avec Defy's ROM. And the phone was perfect...
We both have French Milestone 2 and i don't think it is my fault. I quite shure i did everything straight. I maybe a noob in dev or other things. But I have experience in flashing things...
My bootloader is 70.12 so it's different than Alex. And i used just like Alex the French Stock sbf i used everything i needed a freash clean install
When i flash i get to the "Please reboot phone manually" like everytime and then pull the battery go to bootloader and get finish
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Motodoido said:
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Click to expand...
Click to collapse
My phone is supposed to have the 70.12 bootloader right? If i flash the new one won't the repair center see that i modified the software?
The is no 70.12 bootloader on and-developper so how do i get back?
My phone doesn't not get to PASS it never did even in past... Except when i could do a wipe data and cache before flash
If you flash the 70.13 you do not be able to back to 70.12, so think before. When RSD is in reboot your phone 30%, I always remove my phone and never have problems
If you want try, here is the 70.13
The bootloader for the sbf 2.2.2 is 70.13 ! I remenber well, i did the official update on a windows pc, and it started by updating bootloader! But it's good news and may be just some sort of sbf incompatibility with the bootloader...just find the correct ones?
Sent from my MotoA953 using XDA App
pat972 said:
But it's good news
Click to expand...
Click to collapse
What is the good news ????

MS2 reboot only in Bootloader!

Hello,
I have a big problem. I misplaced my MS2 with a customrom Droid 2 installed. after which the phone is stuck at Moto logo, I wanted to flash it with RSD Lite again. But unfortunately it has made ​​all the worse. The screen then remained always black. By accident I found out that the master is always handy in the bootloader if I make the battery clean. the RSD Lite detects it again and then when I want to flash an SBF file he does it without problems. only then if he should make a reboot it ends up back in the bootloader. but i can´t see the bootloader. I know not what to do yet.
can anyone help me?
thank you
greeting
I didn't get quite right the situation but tell me which sbf are you using?
Is it the same android version that was before?
Have you tried pulling off the battery, waited 10 seconds, hold vol + and vol - (or X and arrow up, depending on android version) and powering up to enter the recovery and do a full data wipe? Does it starts normally after that?
Yes, it is the same as before sbf. I've been on it before GB and GB have also flashed.
at the first flash of sbf I'm also in the recovery menu and have a full wipe made ​​but which has unfortunately not have shown anything.
I thought that maybe Customrom a different bootloader has been on it so I downloaded the 70.13 bootloader and flashed.
Since then I have the problem that it only comes into the bootloader, and here again but I have only a black screen.
greeting
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
devilbatghost said:
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
Click to expand...
Click to collapse
hi Devilbatghost,
i redownload the SBF and its the right SBF.
i send it to Moto to fix it.
thanks for all.
greet
Original Milestone 2 SBF files
Can someone please tell me where I can get these original SBF files for my M2? I want to go back to the stock ROM for my phone.
Here:
http://and-developers.com/sbf:milestone2
the links for the sbf files are dead.
yes
those links are dead.
does anyone know of an alternate location for the sbf files?
xsghost said:
those links are dead.
does anyone know of an alternate location for the sbf files?
Click to expand...
Click to collapse
Check here for the name of the file you want to download
http://and-developers.com/sbf:milestone2
And download from here the ROM you want
http://sbf.system-ready.org/umts_milestone2/
I have trouble getting the sbf file too, all the links given are dead and i cant reach it from anywhere else, would anyone be kind enough to share the UK 2.2 sbf file?
http://sbf.droid-developers.org/umts_milestone2/list.php
Sent from my A953 using XDA

DEFY Becomes DEAD After Flash-- Help

My Motorola Defy goes dead after flashing.
-No Recovery
-No bootlaoder
But when i connect it with RSD, white led turns on and RSD connect it.
I try 3 different ROMs for Flashing but nothing has been changed.
When pressing vol down and power not going into recovery.
When Pressing Vol Up and power not showing black screen with white Text for bootloader.
-After flashing 3 Roms, RSD shows status PASSED and phone Reboots but not turn ON.
-Battery charged with Universal Charger
I installed these roms:
>JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_ USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
>JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB 1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Se rvice1FF.sbf
>JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTINT_P030_A020_HWp3_Service1FF.sbf
Every time i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
Completely Dead
When i go this phone it has eclair and than updated to froyo and than i moved to miui.
It comes from T Mobile. when i got, it has T Mobile startup logo and T mobile Apps in it.
cute_kayani said:
My Motorola Defy goes dead after flashing.
-No Recovery
-No bootlaoder
But when i connect it with RSD, white led turns on and RSD connect it.
I try 3 different ROMs for Flashing but nothing has been changed.
When pressing vol down and power not going into recovery.
When Pressing Vol Up and power not showing black screen with white Text for bootloader.
-After flashing 3 Roms, RSD shows status PASSED and phone Reboots but not turn ON.
-Battery charged with Universal Charger
I installed these roms:
>JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_ USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
>JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB 1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Se rvice1FF.sbf
>JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTINT_P030_A020_HWp3_Service1FF.sbf
Every time i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
Completely Dead
When i go this phone it has eclair and than updated to froyo and than i moved to miui.
It comes from T Mobile. when i got, it has T Mobile startup logo and T mobile Apps in it.
Click to expand...
Click to collapse
I think I got the answer for you......
Use below mentioned steps and share the outcome:
1. Download the compressed SBF and extract using any software like 7zip or something - http://www.mediafire.com/?s3uc8cb782w1oue
[Note: Do not use any download manager while downloading.]
2. Use RSD Lite to flash the phone with the SBF file;
3. After flashing let the phone boot up and hopefully it will resolve the issue.
However if the phone is still in boot loops then try entering Stock recovery and wipe data/format and wipe cache also.
Please use the above steps and share the outcome.
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
cute_kayani said:
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
Click to expand...
Click to collapse
I recommend DON'T flash that SBF! Why? : Its a chinese and has the potential to fry your LED! And since it is not downgradable and rootable you may get stuck!(See this. From what I have seen in few threads there is a big chance your battery is dead and not charged!!
okay, if battery is dead why RSD connect it and every time status passed message appears.
PLz tell me what to do
pranks1989 said:
I recommend DON'T flash that SBF! Why? : Its a chinese and has the potential to fry your LED! And since it is not downgradable and rootable you may get stuck!(See this. From what I have seen in few threads there is a big chance your battery is dead and not charged!!
Click to expand...
Click to collapse
I understand your concern and I appreciate your comment however, I would like to point this out that this firmware is for "India, Indonesia, Malaysia, Philippines, Thailand, Vietnam" and its safe to flash I have flashed it multiple times and its Rootable and even my flash is healthy.
You may visit this link and Control+F "JRDNEM_U3_3.4.3-33-1":
http://and-developers.com/sbf:defy
The chinese firmware which is suspicious of burning flash is "China - JDGC_U6_0.26.0" [Correct me if I'm wrong.]
cute_kayani said:
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
Click to expand...
Click to collapse
cute_kayani said:
okay, if battery is dead why RSD connect it and every time status passed message appears.
PLz tell me what to do
Click to expand...
Click to collapse
You may use this firmware or any different firmware from this link : http://and-developers.com/sbf:defy
The ROM which I have given you link is Rootable however not down-gradable.
You may refer this extract from All-in-one-Guide-for-Defy
SBFs
SBF is how Motorola packs all the information to be Flashed on your phone. Inside this package are a lot of other files, each of these files named with CGXX where XX is a number.
So when you Flash a Full SBF, it takes the phone memory, format it, create the partitions and then copy the information inside these partitions. Each partition corresponds to a CGXX file. Here is where the eFuse thing kicks in.
There are a couple of CG files containing the version number of the Android you are flashing. So let’s say you are on Éclair Stock, first version, no updates no nothing. This version has a Version 1 number. When the phone gets updated, this version changes to Version 2 for example.
Each Android version has each own ID, once you go up, you CAN NOT go back, and this version is in CG31 AND CG39 files inside the SBF.
FIXED SBFs
Is a modified SBF without the CG31 and CG39 files, thus allowing to move between Android Versions freely.
Since the Fixed SBF creates all partitions but /System (CG39) and CDT (CG31), we need to copy System data using a Nandroid Backup or the phone will probably not work using the existing /System.
Nandroid Backup
This is just a .zip file flasheable with a Custom Recovery, this will Delete/Copy all the files in the /System and other partitions (depending on the Nandroid) without formatting or remaking the partition thus not modifying the system layout, eFuse or stuff; this is almost harmless, meaning you CANT brick your phone doing it, though you can make Android not boot and a new SBF or Nandroid would need to be installed.
CG Versions
With that explained let’s get to business with versions:
CG Version 2: SBF 2.21 / 2.34 / Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1 (Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread, 2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests Gingerbreads, 2.3.6, (Red lens Defy/Defy+) )
ATTENTION: This CG 7 Version is NOT rooteable. You wont be able to flash a lower version ROM nor Root to use CWM.
If you try to flash a lower ID version than the one already on your phone, you will just get a Black screen after booting or a screen telling you to flash an official rom.
So, with this in mind, you can now hop between Android versions without screwing up your phone.
If you have an Éclair Defy and would like to keep the ability to downgrade to it, you should ONLY install FIXED SBFs of the Android Version you want to install, and then use the corresponding Nandroid Backup for that Fixed SBF.
Official SBFs
Here is a list of all the OFFICIAL SBFs, meaning they come with ALL CGs, these SBFs put your phone like Motorola sold it to you, just need to keep in mind that going UP in versions with FULL SBFS <WONT> I repeat, <WONT> allow you to go back to an older version.
Knowing this you should be able to test every single Android version out there and being able to go to Stock without issues. Just be sure to understand how CG versioning works and you should be fine.
Ref == http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
The only thing which is important here will be to use a Froyo or newer version SBF.
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
cute_kayani said:
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
Click to expand...
Click to collapse
I'm glad to know that it’s finally working for you!!
Yeah to root this follows the same procedure as you have used with the Éclair...
Simply Turn on USB debugging and use Super One click to Root.... >>>> then use 2nd init apk to flash with the Custom recovery
All Izz Well!!
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
cute_kayani I think you double posted mistakenly....
Have already answered your query above
I'm glad to know that it’s finally working for you!!
Yeah to root this follows the same procedure as you have used with the Éclair...
Simply Turn on USB debugging and use Super One click to Root.... >>>> then use 2nd init apk to flash with the Custom recovery
All Izz Well!!
Click to expand...
Click to collapse
---------- Post added at 09:26 PM ---------- Previous post was at 09:12 PM ----------
One important thing for your information is the reason behind those black screens was that you must have flashed Froyo SBF before; which was not down-gradable and now at this point you were trying Éclair which resulted in this issue.
So, the Downgradibility of your previous flashed SBF was causing this issue.
Now, as you have flashed this Froyo SBF; so, now onward in case you need to flash you phone you need to use SBF which should be Froyo or newer and must have “3.4.3” or later Build Numbers.
Hope this helps someone who needs this information.
okay
one bug found, market is still not updated to play store, and when i try to download it says download paused . i cleared both data and cache of market but still not downloading and stuck at paused.
cute_kayani said:
okay
one bug found, market is still not updated to play store, and when i try to download it says download paused . i cleared both data and cache of market but still not downloading and stuck at paused.
Click to expand...
Click to collapse
LOL its official Froyo it might have more bugs
haha okay i am moving to miui.... but from past 7 days my defy remains dead due to Miui weekly rom update
hopefully this time miui wont make any problem
LOL
All the very best this time ..
You know what last week I also updated to MIUI 2.3.23 and my wifi was not working with that ROM however, it was working fine with my CM9 as I had dual boot.
Please update me if you also face this issue with the MIUI 2.3.30
currently am on 2.3.23 every thing is okay, and wifi also working now am updating it to 2.3.30. will tell you if there any wifi bug.
Will wait for your review!!
More force close, and now message comes for low storage. DON'T know why.. some apps moved to SD.
cute_kayani said:
More force close, and now message comes for low storage. DON'T know why.. some apps moved to SD.
Click to expand...
Click to collapse
Lol 2GB internal memory occupied
Yesterday night I flashed with MotoGinger III for a change... so far so good. However, AutoWifi fix is resetting my wifi pwd every 15 mins or so ..
Occupied :/ now how to free that, miui occupied or rom flash occupied it. Internal storage is now just 15 mb left. How to use this defy now
But I used miui before flash, at that time I haven't experienced any low storage problem.
Occupied :/ now how to free that, miui occupied or rom flash occupied it. Internal storage is now just 15 mb left. How to use this defy now
But I used miui before flash, at that time I haven't experienced any low storage problem.

[Q] Defy MB525 UK

Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Hiya, can u tell us how u updated the firmware to 2.2...
Sent from my MB525 using XDA
Hi i think i installed it through the motorola software/update?? when i plugged in the usb & phone it installed the motorola drivers then said there is an update for the phone
saffa1 said:
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Click to expand...
Click to collapse
Bad update, flash a froyo sbf from here: http://forum.xda-developers.com/showthread.php?t=966537
I recommend you stay on froyo so you can install CM7 too
If this doesn't fix it (make sure its right sbf for your type of defy) Then its probably a radio fault that needs repair, but as it worked before it should be fine, its just a bad update, hope this helps
Sent from the real world by hacking into the matrix
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
That's strange I never got any Spanish instructions :O try the latest version from the thread I provided, and read this noob guide http://forum.xda-developers.com/showthread.php?t=1216982 Thanks to these two threads I did what I thought was impossible, flashed froyo and then CM7 on the same day, its not as hard as it seems just follow steps carefully and its easy! Any more questions feel free to ask, you don't need to send your phone learn it yourself its worth it
Sent from the real world by hacking into the matrix
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
saffa1 said:
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
Click to expand...
Click to collapse
Can you explain this in detail so I can try and help you?
Sent from the real world by hacking into the matrix
Questions go in the Q&A section
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
So, your phone is simlocked and when you flashed a different SBF, you have deleted the files that have (probably) previously been installed to unlock it. There are some custom ROM's out there that can simunlock Defy (one of them is MS2Ginger4.0). If you don't know what you're doing and can not handle it yourself, I could flash a custom, simunlocking ROM for you if you don't mind shipping it to Bulgaria and back (I assume you are in the UK).
P.S. There is also a chance that your sim card slot is busted and it can't read the SIM card.
am from uk i can explain or help u over the phone
ibtihaaz said:
am from uk i can explain or help u over the phone
Click to expand...
Click to collapse
I'm not good over the phone, plus my mic is a bit screwed, I'll try write a simple noob guide one day I'm free
Sent from the real world by hacking into the matrix
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
If you flashed a froyo SBF last, you must flash at this time also a froyo SBF.
The Flash of an eclair SBF will end in a black screen, cause froyo SBF are CG4 (Bootloader 4) and eclair SBF are CG3 (Bootloader 3).
The Bootloader must be equal or higher then the last SBF you flashed.
Try this SBF:
http://sbf.droid-developers.org/umt...RYOTMGB_P023_A011_M003_HWp3_Service1FF.sbf.gz
its the tmobile froyo SBF Britain.
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
You WHAT!? Are you sure it didn't just go flat after flashing? My defy can be quite stubborn to boot if it goes dead, general rule is if rsdlite can still recognise it flashing it again should sort it out
Sent from the real world by hacking into the matrix
There's a few things you can try here, don't bin it its almost impossible to brick a defy completely: http://forum.xda-developers.com/showthread.php?t=978140
Sent from the real world by hacking into the matrix
All i have is a black screen with white led and that's only if i plug it in the usb
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
This guy is the best, listen to him he helped me improve my mic problem
Sent from the real world by hacking into the matrix
Auris 1.6 vvt-i said:
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
Click to expand...
Click to collapse
Hi i cant get it into boot-loader i have tried but its just dead
i can get teamviewer but i dont have a web cam

[Q] another milestone 2 brick :(

first of all: yes, i've searched the entire xda-forum aswell as dozens of other sites via google, however, i still cant figure out the exact steps to unbrick my phone.
this is what happened:
1. my motorola milestone 2 is running CM10 and has CWM5 (everything fine, rooted and so on).
2. i got the milestone 2 toolbox (M2T) and tweaked only some minor things, eg. so that the hard buttons and keyboard is always illuminated (did no cpu changes)
3. i used my phone for a few months, everything was okay, stable. only thing is that the battery is kinda f****ed up, i had to charge it very often
4. yesterday, after running out of battery again, i was at a friends house, and i thought i could try to charge it with his charger (he has a htc wildfire), but it didn't work, the white charging led lit up, but the phone didn't boot, so i unplugged it to charge it later at home
5. got home, plugged the milestone 2 in for charging, the screen lights up, the cyanogen-google-motorola bootlogo (the thing before the actual bootanimation starts) showed up, then the screen turned black (still with backlight)
so i took the battery out and just tried it again, but same thing...
i realized that my phone is bricked and searched on the internet for help. i read somewhere, that i could try to get into recovery mode (power up + X key) and do a factory reset and wipe the cache, so i did, but still, black screen
what i discovered now is that i have to restore the phone using RSDLite and a .sbf file (please correct me if i'm wrong, i don't even know what this . sbf is and does, only that is has to do something with the firmware?)
i found this site for the .sbf files, but i can't figure out which one to download and use! as already said, i had my phone running on cm10 which is 4.1.2 i think and the milestone 2 stock android version was 2.2 froyo i believe.
[can't post outsite links yet] http : // sbf.droid-developers . org/umts_milestone2/list . php
another site, where these .sbf files are, is this one, but i cant download anything because i get an error "Sorry, this offer is currently not available in your geographical area" (tried a proxy, still doesn't work):
[cant' post outsite links yet] http : // and-developers . com/sbf:milestone2
so as of now, i'm stuck with my bricked phone and don't know which exact .sbf file to choose to continue my "unbricking"
btw i live in GERMANY so i already figured out to look for DE,AT,CH versions of the file (no branding), but i dare to take the Retail DE,AT,CH file which says MILS2_U6_2.4.24 (it confuses me), because i'm a bloody noob and i don't want to destroy my phone, because i read that downgrading is impossible after .sbf flash.
i'm thankful for any help in advance!
Hello,
Please try this: http:// forum.xda-developers.com/showthread.php?t=957845
See if it can help you.
thx for your answer
is it possible in my case to flash a 4.1 .sbf?
or could you explain me what these numbers mean "MILS2_U6_4.1-22_SIGNED_..."
as already said, i'm very confused
If you dont know what your original sbf is, try one by one... starting by the lower number... you should manage...
A milestone is nearly unbrickable !
I had the same problem during a week , I flashed so many... finally i did it a 236 one latino version !
After there are tutos to root your phone depending your sbf version.
Be carefull, you cant downgrade after i guess...
Good luck
Sent from my ME722 using xda app-developers app
You should be fine with this one: http://sbf.droid-developers.org/umt...ILE20RTDACH_P021_A011_HWp2a_Service1FF.sbf.gz
After flashing, if it doesn't boot, take out your battery, press the X button on the keyboard (keep it pressed), put the battery back in again, and turn the phone on.
After you reach the screen with the android logo and the exclamation mark, press the @ key (or both volume buttons) and select "wipe data/factory reset" using the arrows on the keyboard and the power button to select.
Hope it helps.
Lean946 said:
You should be fine with this one: ((url))
After flashing, if it doesn't boot, take out your battery, press the X button on the keyboard (keep it pressed), put the battery back in again, and turn the phone on.
After you reach the screen with the android logo and the exclamation mark, press the @ key (or both volume buttons) and select "wipe data/factory reset" using the arrows on the keyboard and the power button to select.
Hope it helps.
Click to expand...
Click to collapse
i flashed the .sbf with RSDLite, tried to boot but it's screen won't even turn on. it's completetly black (no backlight).
tried to boot with the X button, didn't work... same thing...
even when i press the camera button + vol up + vol down + power button the screen wont turn on into bootloader mode.
the phone seems pretty much dead right now
the only evidence that my phone still lives inside is the fact, that RSDLite recognizes the phone as "connected"
illfish said:
i flashed the .sbf with RSDLite, tried to boot but it's screen won't even turn on. it's completetly black (no backlight).
tried to boot with the X button, didn't work... same thing...
even when i press the camera button + vol up + vol down + power button the screen wont turn on into bootloader mode.
the phone seems pretty much dead right now
the only evidence that my phone still lives inside is the fact, that RSDLite recognizes the phone as "connected"
Click to expand...
Click to collapse
If RSD lite recognize it, that's a good point...
have you ever managed to flash a sbf and then have the phone which restarts ?
Did you triy the highest ones ? I mean the bl=6 ones ?
Look, my post (link below), I didn't manage first, after many tries, until finding the good sbf... (2.3.6 ROM version for me)
http://forum.xda-developers.com/showpost.php?p=38641862&postcount=43
mattheoh said:
If RSD lite recognize it, that's a good point...
have you ever managed to flash a sbf and then have the phone which restarts ?
Did you triy the highest ones ? I mean the bl=6 ones ?
Look, my post (link below), I didn't manage first, after many tries, until finding the good sbf... (2.3.6 ROM version for me)
((url))
Click to expand...
Click to collapse
i never flashed a .sbf before, this was my first attempt. i'm afraid of flashing a random .sbf from the list because i'm not sure about the downgrading afterwards (if i mess up)
could someone explain me the dangers of flashing .sbfs related to up-/downgrading?
Don t know really the risks... an expert maybe will answer you.
What I know is that you can downgrade from bl=3 to 2 (there s a toopic about it)
For my case the only way I founf to unbrick was to flash a bl=4 (south american version)
I m using it for a couple of month and works great with CM 10.1 (the onlyh difference was that I had to follow another way to root it)
Maybe you could try by flashing all the bl=2 one by one... if it doesnt work then try the bl=3 ones...
You should find the good one, I cant believe your phone stays bricked.
Good luck
Sent from my ME722 using xda app-developers app
mattheoh said:
Don t know really the risks... an expert maybe will answer you.
What I know is that you can downgrade from bl=3 to 2 (there s a toopic about it)
For my case the only way I founf to unbrick was to flash a bl=4 (south american version)
I m using it for a couple of month and works great with CM 10.1 (the onlyh difference was that I had to follow another way to root it)
Maybe you could try by flashing all the bl=2 one by one... if it doesnt work then try the bl=3 ones...
You should find the good one, I cant believe your phone stays bricked.
Good luck
Sent from my ME722 using xda app-developers app
Click to expand...
Click to collapse
how do i know which .sbf has which bl=x? what do you exactly mean by that?
illfish said:
how do i know which .sbf has which bl=x? what do you exactly mean by that?
Click to expand...
Click to collapse
Look here: http://sbf.droid-developers.org/umts_milestone2/list.php
2.x.x and 3.x.x are BL=2 froyo firmwares.
4.x.x are BL=3 gingerbread firmwares.
4.x.x with R01 or R02 are BL=4 gingerbread firmwares.
General rule: Once you go up, you can't go down.
The so called "Chinese kernel" is a BL=3 kernel that supports both froyo and gingerbread based custom ROMs, as well as stock GB and stock froyo.
If it says US1 after "SIGNED" in the file name, it's made for 850 / 1900 / 2100 3G bands.
USA and UCA have 900 / 2100 (european) 3G bands.
Here's another page with resources: http://and-developers.com/sbf:milestone2
Unfortunately the links in there don't work, but you can just copy the MD5 and search it in the first page and donwload it from there
Lean946 said:
Look here: http://sbf.droid-developers.org/umts_milestone2/list.php
Here's another page with resources: ((url))
Unfortunately the links in there don't work, but you can just copy the MD5 and search it in the first page and donwload it from there
Click to expand...
Click to collapse
excuse me, but i can't figure out where to download these .sbfs
i've copied the MD5s and searched them with google, however every single search result leads me to another (random/chinese) repository of Milestone 2 firmwares, every one of them being offline (because they are all uploaded at the same exact hoster, i mean literally)
isn't there any chance to download these .sbfs from somewhere (another hoster) from my location (germany)?
or did i misunderstand something?
i think i'm going to search for the chinese kernel in order to unbrick my phone, at least i hope it will work
illfish said:
excuse me, but i can't figure out where to download these .sbfs
i've copied the MD5s and searched them with google, however every single search result leads me to another (random/chinese) repository of Milestone 2 firmwares, every one of them being offline (because they are all uploaded at the same exact hoster, i mean literally)
isn't there any chance to download these .sbfs from somewhere (another hoster) from my location (germany)?
or did i misunderstand something?
i think i'm going to search for the chinese kernel in order to unbrick my phone, at least i hope it will work
Click to expand...
Click to collapse
I think you misunderstood.
Copy the MD5 of the SBF you want from the second page and search it (alt+f in Google chrome) on the first page to download...
Sent from my ST25i using xda app-developers app

Categories

Resources