Hello guys,
I have a LG E900 unlocked from Telefonica Spain and I live in Lima - Perú (southamerica), I have problems with MMS and 3G network, I can navigate on internet by EDGE but the speed is terrible.
On MFG application I can't find my mobile operator and I can't set up the network profile because my operator doesn't appear in the list
I have read that if I make a hard reset on the phone, in the first boot the Phone catch the network parameters (including MMS and 3G) from the carrier (from my SIM carrier), it's true?
Or are there any way to modify manually the xml network configuration file in order to set the correct parameters in all the fields?
I will really appreciate your help.
Thank you
All you need to do is set ADC on, and soft reset, then you are good to go. You need to go to Engineer Menu>Other Settings>Set ADC. Alternatively, you can download the network app from the LG store in the Marketplace, and it will set ADC to ON upon first time running the app...
Hope it helps.
Hi kapanak, I just tried your advice few minutes ago but the problem continue happend, I've tried with soft a hard reset and in both cases set ADC to ON doesn't work. My carrier have to send me the data in a special format or stuff like that?
Is it possible to change the parameters of xml network profile file by myself?
Just in case: what do you mean with "soft reset"? turn off and then turn on the phone?
How can I change proxy settings on this phone? In this post http://forum.xda-developers.com/showthread.php?t=843517 in the #3 it is mentioned some way to set the proxy and port settings on a samsung focus, I thinks these settings are missing on my LG Optimus 7 and that is why I can't access to 3G Network. some ideas?
Thank you for your answer
After you set ADC on, try to change sim (from another operator), restart, let it connect, and after that, insert back your sim. After restart go to settings, celular, data conection on and it should work.
Be sure if you have 3G network in your area...
Yes, I forgot to mention you need to swap SIM cards in order for the above to work. And make sure you take out the battery or you WILL short circuit the SIM, and your phone.
Thank you kapanak for your answer but It didn't work, I couldn't connect to 3G network and I still seeing the same network parameters (proxy and port) on my network xml file (throught MFG). Are there any way to modify these parameters directly on xml network file?
I guess that my carrier (Claro - Perú) is not able to send the autoconfig information in WP7 format.
Thank you
Have you tried to manually put the Claro APN? I used to do that here in Brazil and at least the 3G worked.
Try to do this:
Settings > Cellular > add apn, and then:
APN: claro.pe or wap.claro.pe (I found both on Bing)
User name: claro
Password: claro
And I think that's it.
PS.: My E900 only start to get automatic setup through ADC after I flashed my Orange-FR phone with an Open-EU ROM found here on XDA, before this, I used to manually set the APN and worked well, only the MMS was missing.
Related
I subscribed to an unlimited for one day 3G service. I've been Googling for instructions and the only thing I found is this, which tells that I should use the APN "http.globe.com.ph". I still couldn't connect after setting the APN (I made an APN setting with a name and an APN. All other fields are blank).
I tried it on a Nokia E63. It worked. When I tried browsing, without tweaking any setting yet, it just asked me for an APN and all APN's are predefined. I selected one (Globe Connect) and it worked. I was able to browse on the E63.
Any idea what I should do?
Currently experiencing "hiccup" in internet/data experience with my focus. If phone is not in 3G+ mode, i get no data.
Can someone confirm my theory;
Situation:
Purchased Samsung Focus from rogers, thus rogers network profile (preset network setting for data usage such as MMS or internet).
Unlocked and stuck in bell SIM. can send/recieve calls, and txts, use data (internet, marketplace, weather updates, etc) if phone is in 3G+ mode (seen by tapping near top of screen). Can not use MMS
Presumable:
1)Focus was initially programmed to work on Rogers network.
2)Focus/Rogers, have a GPRS & EDGE capability
Theory:
Focus is programmed to use 3G radio for data (which is more widely accessible, & consumes less power), until detects 3G+/HSPA network and switch to that HSPA radio.
Since bell does not have a GPRS or EGDE network, when phone tries to receive data through 3G radio, it get nothing because no GPRS or EGDE network.
Is this possible, can phones change network they're using?
Theorized Solution:?????
Since Bell has 3G+ network,and they offer LG quantum. Could LG quantum be initially programmed to only use 3G+/HSPA, therefore anytime data is requested it activates the 3G+ radio.
If this is true of the LG quantum, could this be programmed into the Focus as well.
Thus i ask the community is this possible and how to implement solution?????
Sidenote:
I know the easiest solution would be to change to Rogers, however, Canadian provider fees are ridiculous (i'd be incurring early cancellation fee + a new restrictive costly plan from rogers) and there are others which don't have a choice but to use bell, and should have the freedom to choose a device of there choice with a little work.
I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."
colinbo said:
I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."
Click to expand...
Click to collapse
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
a search for "FIDO APN" on google, and i found this;
FIDO
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
Leave All other Settings Blank
MMS
Name: fido mms
APN: mms.fido.ca
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
Leave All other Settings Blank
That should get your data working, and you wont be incurring roaming charges.
Other then that, let me know if your having a similar issue to above, i don't think you should as FIDO is a pure GSM network from day one so it'll have GPRS/EDGE/HSPA
MMS
Interesting the various issues people are having with connecting to different networks...doesn't seem to be a one-size-fits-all issue/solution.
In my case, I got a new Rogers sim card (unlocked AT&T branded Focus from Expansys), put it in, updated my APN info, and I have voice and data.
BUT, I have no texting/messaging ability! I know others have listed the MMS settings for Rogers, but the Focus seems to only allow adding *one* APN setting. No clue where the MMS settings can be applied.
Other friends who have Rogers sims were able to put it in their Focus and had no problems at all with texting, internet, etc.
Anyone have thoughts on this issue, please respond.
reaver_shadow said:
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
Click to expand...
Click to collapse
The instructions appear to be for the LG device, not the Samsung Focus. The code doesn't get me into any factory menu. The diagnostics screen just sits when I type in the code. I downloaded the Network Profile app but it errors out saying "The application can't be launched with your mobile operator".
Facepalm
OMG, I'm an idiot!
So apparently Rogers requires 1+area code for sending texts? Telus didn't...*sigh*...
So yes, I have texting ability (haven't tried MMS though).
Samsung's response:
http://www.wpcentral.com/samsung-our-phones-do-not-support-network-reconfiguration
Now that this issue got publicity lets see how long they keep up this attitude?
UPDATE:
COuld it be MS to the rescue?
"Microsoft is aware of the problem and it has been escalated."
Source:
http://www.wpcentral.com/windows-phone-7-unlocked-devices-and-mms-quite-mess
Not much to add other than I'm in the same situation as reaver_shadow. Bought from Rogers, unlocked it and put in Bell SIM card. Everything works except MMS and data if not on 3G+ (will work when '3G' is displayed, but I guess it's borderline). Tried playing with option *#2263# in Samsung Diagnosis (##634# + Dial), but does not fix the issue. Hoping the Network Profile will become available for changing. Using the Network Profile app from Samsung does not work. Says it does not work with my provider. Says active profile is 'Rogers'.
Update:
Probably just lucky, but I have had a steady connection since this morning. I set option 2-7 under Diagnosis option *#2263# (use all WCDMA Band). What maybe did the trick is enabling Roaming, as mentioned by @colinbo. My apn is set to pda.bell.ca.
Update:
Nope, just luck. :-(
Have you tried this:
http://forum.xda-developers.com/showthread.php?p=9709346#post9709346
That's how I got data working on SaskTel. Since we're using similiar technologies, it may work for you as well.
That's great!! I'll give it a try. Never thought about pressing the 'back' button. I should know next week if this solves it.
Hi all,
I'm running out of things to try to get my internet working. Hopefully you can tell me where to look for more info, because right now it could be anything (broken phone?)
Here's what I've got:
- Meizu M9 android phone with (newest) 15318 firmware
- vodafone NL sim card, used with internet with HTC Magic for almost 2 years
- I can call, receive SMS, etc, but there is no internet (2G nor 3G)
- I've set up an APN with the following: live.vodafone.com, vodafone, vodafone
- I've tried setting the proxy to 192.168.251.150:8799
- I've tried both PAP and CHAP
- In the info menu (*#*#4636#*#*) it says GSM connected, GPRS disconnected or connecting. When it says disconnected, the 'GSM Disconnects' thing says 'fail due to Unknown Data Error'. I ran into a piece of code which lists all the errors. This is the default error, when it doesn't know what else it is.
I can't tell if this is a firmware, APN or hardware problem. Has anyone got any ideas?
i think it's apn or firmware. because if it would be hardware problem, then calls and sms wouldn't work either, but i'm not sure. try a hard reset (make sure you backup your data first) or find another apn settings. my carrier also has problems with apn. oh wait. another question. can you receive or send mms?
Is there a way to lock my Diamond2 to use SIM card only from one operator (CC 284 NC 03, Bulgaria Vivacom) ???
I want to make my girlfriend to get SIM from Vivacom .
Not so sure about the simcard part but you can configure the phone to use only 1 network. Go to phone setting, personal, phone.
On the network page, set to manual and pick the operator network u wanna use. That'll get the phone to connect to that particular network only.
Changing simcards should result in no network connection, unless the setting is changed back to auto or set to another operator..
neocyke said:
Not so sure about the simcard part but you can configure the phone to use only 1 network. Go to phone setting, personal, phone.
On the network page, set to manual and pick the operator network u wanna use. That'll get the phone to connect to that particular network only.
Changing simcards should result in no network connection, unless the setting is changed back to auto or set to another operator..
Click to expand...
Click to collapse
Good solution, but when reboot the phone I get message to select network again and she can choose another network.
Lol don't you think you are over-abusive to your gf??? What's the catch? Unlimited Viva 2 Viva calls????
Hello!
I was wondering if anyone could please help me with an issue I am having with my HTC Trophy (locked for Verizon)
I am looking to unlock it to use with a Trinidadian SIM card for when I return home, but it is prompting me for an unlock code when I put the phone into GSM mode. It says "This SIM card can only be used on specific networks. Contact your customer service center for the unlock code"
On Global Mode it also says locked/PIN required, on CDMA it does not show a carrier but will prompt me over to Verizon customer support to activate the phone (which I do not want to do)
I called Verizon; they won't give me an unlock code and the Unlock-code eBay the sellers I have contacted said it MUST have a 14 digit code; but I only have 13...
I am attaching a photo of the information of my phone. Any help would be greatly appreciated!!
photo link (no space between http) http ://c1205.hizliresim.com/x/c/5nlrq.jpg
Check the inside of the phone, under the battery to see if there is another digit to your IMEI.. it has 14 digits in your photo.. so I don't know why you'd think there was only 13 .. that's the number you need.
I wonder if anyone knows a good service for doing this on Trophy 7 for Verizon. I know mwang has his security unlocked to use his on T-Mobile., I wonder if he used a service?
Verizon will normally provide you with an unlock code if you have service with them, and you tell them you are traveling internationally.
Ah sorry I meant the eBay unlock code sellers told me I would need a 15 digit, not a 14 digit IMEI to unlock this dual CDMA/GSM device. However I found a seller that was able to do it; r.ebay.com/FYDQfX
and now; SUCCESS img: e1205.hizliresim.com/x/f/5tm57.jpg
Also to clarify; what was causing me grief was that by dialing *#06# gives you the MEID, which starts with 'A' and to my knowledge is not used to unlock a dual CDMA/GSM device.
IF you press *#06# you should be getting 17 digits.
You can also check the Settings sections in mobile, that will also show you the IMEI number, or remove battery from the phone, it should be printed on white sticker.
Thanks
Just used an unlock code from the eBay seller mentioned in the above post; worked perfectly! The only issue I'm having now is that I'm only getting Edge wireless. I set it to use 3g and GSM on my HTC Trophy using a Straight Talk sim, but it just connects to the Edge network instead. The APN I'm using is att.mvno
Any suggestions? I know the Verizon Trophy supports HSPA+ 2100MHz
Did you ever get 3g on your phone Fad?
Yeah, try this. Go to the market, HTC.. then download/install "Connection Setup." Run that app and set it to whatever carrier you are using. That should get everything up and running for you.
If you still aren't getting 3G data speeds, check Straight Talk's coverage map and see if 3G is offered in your area. Straight Talk uses AT&T towers in many areas, and I know in my area... 3G is a no go.
Thank you so much for the response!
I did a lot of reading on the HTC Connection Setup app, and it should help those that are using T-mobile or AT&T, however, it does not have a Straight Talk profile, which is the carrier I'm using; apparently it doesn't work with .mvno APNs very well.
However, they have been bombarded with Straight Talk customers asking for support, and it's only a matter of time before they add one, supposedly.
I've spoken with a few other HTC Trophy users and all of them were also able to get their phones unlocked, but they could only get Edge data as well. Hopefully the connection setup app will help them!
Try contacting Stiaght Talk for the apns. They should be able to provide them to you... Then post them here. ;-)
Well, unfortunately the HTC Connection Setup app does not allow you to manually edit the APN. It only allows you to select a preset one and as I said before, they do not have a Straight Talk profile as of now.
The only editing you can do on a Windows Phone without an app, is just the actual APN, Proxy, Port, Username, and Password. You cannot edit the MMS APN settings sadly enough.
The APN settings for Straight Talk are the following:
APN: att.mvno
MMS APN: att.mvno
MMSC: I'll have to edit when I have permission to post an http link
MMS Proxy: 66.209.11.33:80
Max Size: 600
Leave the rest of the settings blank, this has worked on other smartphones for full data speeds and MMS compatibility.
I have since factory reset my HTC Trophy and tried connecting to Straight Talk and AT&T with data above Edge, this was unsuccessful; a reset will not fix the radio. The only thing I can think of is that when HTC and Verizon pushed the Mango update on the Trophy, it changed the radio since it is suppose to support AT&T's spectrum. I purchased an HTC Titan on eBay and am now using that as my phone; I'm getting full HSPA+ speeds. The only issue with Straight Talk on Windows Phone is the MMS APN settings, I cannot receive picture or video text messages since it cannot be edited.
Hopefully HTC will add a Straight Talk profile, or allow its customers to change the settings Manually within the App.
Good luck to anyone with an unlocked Trophy, I cannot get above edge data or MMS working on Straight Talk.
Oh, you don't need an app! As long as you have Mango or above rom installed, you can edit/add the apn by going to Settings=>Cellular=>add APN button at bottom of screen.
You cannot edit the MMS APN, only the data APN by doing that. As I said, this will enable you to get full data, but you cannot get picture or video text messages until we can fully edit the MMS APN.
Oh, hrm. I wonder if there is a way in the registry? Let me look at the Verizon packages and see if I can find the registry settings. There must be a way.
Dalulz said:
The APN settings for Straight Talk are the following:
APN: att.mvno
MMS APN: att.mvno
MMSC: I'll have to edit when I have permission to post an http link
MMS Proxy: 66.209.11.33:80
Max Size: 600
Click to expand...
Click to collapse
Okay, I think I might have found a way to make MMS work on Straight Talk using manual editing. You will need a fully unlocked phone with registry edit to do this.
First, download and install Connections setup. Apply AT&T settings (I'm hoping this will give you the full set of values you need to edit).
Now, open up register editor and navigate to: HKCU\Software\Microsoft\ShortMsg\MMS\Profiles\ATT
I'm not sure what values to edit to what. If you find the equivalent AT&T settings vs Straight Talk, you should be able to figure it out.
I'm wondering if we can edit Connection Setup similar to how it was edited for Interop unlock for HTC to add additional carriers to the list. The new version of Connection Setup (1.15) seems like it has selection for carriers then 1.14A (the version that worked with Interop) and 1.14B (the secret rerelease that was released after interop unlock). You'd still need an unlocked phone before hand, but it'd be much better then nothing at all.
If I knew anything about making xaps, we could make a xap to apply the settings once we confirm what works.
As for Verizon radios possibly being the issue, if you have an HSPLed phone, I have a radio thread and anyone can try EVERY radio to find one that works (I'd start at the newest and work your way back).
Trophy supports only 2100MHz UMTS. You will never get above Edge speeds anywhere in North America.
I unlocked my HTC Trophy for use with AT&T. Works fine but if using the phone to call someone, it shows up on their caller ID as "Private Number". Have you managed to get it to show the real number? If so, could you email me how you managed to do it? Many thanks.
[email protected]
SIM unlock code
It appears that ebay link in this post is not valid anymore. Can someone recommend me reliable online service for unlocking my verizon SparkW. I am confused a little, because it seems that according to experiences of other people, unlocking phone this way is not successful every time. Is there another way for SIM unlock (except asking verizon for code...)