Database Users

how can ensure that only wifi is the connection setting to access the interent

hey guys
another question?
I was once bitten by a huge telephone bill where I had to pay 300$ since it seemed that when my wifi gets disconnected I was browsing using some other data connection method without me realizing that.
SO how could I 100% disable all data connection, and only have the wifi be the only way to use for internet access
thanks

hykhleif said:
hey guys
another question?
I was once bitten by a huge telephone bill where I had to pay 300$ since it seemed that when my wifi gets disconnected I was browsing using some other data connection method without me realizing that.
SO how could I 100% disable all data connection, and only have the wifi be the only way to use for internet access
thanks
Click to expand...
Click to collapse
Use the following app 'no data' which I've attached and toggle off Internet & wap. This way only wifi is available. If you need to use data connection again, just toggle it back on.

Wi-fi not working

After connecting to 3 different wireless connections and none of then working, I'm concluded that my wifi isn't working.
I go to settings and check wifi on, it finds the network, connects, but I lose my entire data connection for the duration wifi is turned on!
Is anyone else having this problem?
Sent from my Samsung Vibrant

I'm having the same issues with the wifi. I downloaded wifi analyzer to make sure I was on a good channel. Set it to the best channel and my signal strength is 100%. I will be able to connect for a little bit but for some reason it goes in and out, connection unsuccessful, yada yada yada. I messed with all the troubleshooting solutions for my router (dgl-4300) but nothing works. If anyone can reply with a fix or point me in the right direction, that would be greatly appreciated.

Same Issues
Any help is greatly appreciated. Data working fine when on 3G but Wifi = no data. Connection is fine, IP is fine.
UPDATE: It's working again on my home WIFI. Will have to see if it's just an "at work" issue. Hopefully IT can assist.

Same problem with Verizon MiFi
I have had ZERO problems connecting to the Linksys access points we have setup at my home and my office, but recently my work provided me with a Verizon MiFi (as well as an iPad - don't hate ) and I've had MANY issues trying to get my Vibrant to consistently connect to the MiFi.
My iPad, Motorola Droid, and Laptop have no issues connecting to the MiFi.
On my Vibrant I'm running the 2.1 stock ROM with root & the latest ClockWork recovery.
It will "connect" to the MiFi (I use quotes because I can't really tell - it AT LEAST receives an IP). But I'm unable to send and receive data. I can't even browse to the MiFi's internal configuration page .
To FINALLY get it to connect consistently I have to do some kind of random combo toggling the wifi off and back on and then turning the MiFi off and back on and it will EVENTUALLY connect and stay connected with data flowing freely.
I've customized my configuration a little bit on the MiFi so I'm going to reset it back to factory and not change the config to see if it makes a difference - because at lunch I was able to connect to my boss' MiFi with no problem. I'm thinking it may either be the phone or the mifi...

I've connected to about 10 different wireless networks with NO issues, at all. The connectivity is actually much better than my G1/Nexus.
HOWEVER, last night at a bar I was connected to their wifi, strong signal, but I was not able to use Data. I was in a very poor reception area for T-Mobile... don't think that could be an issue, bit the other places I use wi-fi that is not the case.
I just chalked it up as a fluke and moved on. Not sure what was wrong.

I had this happen to me today. I just rebooted and it went away. Toggling wifi didn't help, but I only tried it once. The phone reboots so quick I figured I'd give it a try.

I have set the phone up manually with static ip. Seems like its a problem with the dhcp.

robnil said:
I have set the phone up manually with static ip. Seems like its a problem with the dhcp.
Click to expand...
Click to collapse
I'm gonna try this.
Sent from my SGH-T959 using XDA App

[Q] EVO tethering via USB - Updates 9/2010

OK, so I don't want to use EasyTether or PDANet. I also don't want to pay Sprint a penny more than what I am already paying them. So, I start hacking, debuggin, looking, searching for ways to get the usb tethering working. Here is what I found.
If I turn off Wifi on my laptop, connect PC to EVO via USB and enable WiFi on the EVO, then connect to my WirelessN LinkSys Router.
AND when I connect I choose the USB Tethering option.
It works, what.....yeah, it works.
13.47MB down/3.78MB up, life it good.
I am rooted, used the downgrade to 2.1, root with unrevoke, upgrade to 2.2 procedure defined here at XDA.
Now the caveat, if I use 3G and not WiFi, I get the notorous Error Code: 67
Now, somewhere in this haystack at XDA I saw a thread talking about cheat codes, but for the life of me, I can't find it now.
What I am thinking is SPRINT disabled the modem, I need the code to enable the modem. OR, Sprint did something to disable the feature, need the code to enable the feature.
Anybody ???

um... if you're rooted just install Cyanogen rom and use the built in USB tethering without having all that funky bs. Works with WIFI + 3G.

rcbarr said:
OK, so I don't want to use EasyTether or PDANet. I also don't want to pay Sprint a penny more than what I am already paying them. So, I start hacking, debuggin, looking, searching for ways to get the usb tethering working. Here is what I found.
If I turn off Wifi on my laptop, connect PC to EVO via USB and enable WiFi on the EVO, then connect to my WirelessN LinkSys Router.
AND when I connect I choose the USB Tethering option.
It works, what.....yeah, it works.
13.47MB down/3.78MB up, life it good.
I am rooted, used the downgrade to 2.1, root with unrevoke, upgrade to 2.2 procedure defined here at XDA.
Now the caveat, if I use 3G and not WiFi, I get the notorous Error Code: 67
Now, somewhere in this haystack at XDA I saw a thread talking about cheat codes, but for the life of me, I can't find it now.
What I am thinking is SPRINT disabled the modem, I need the code to enable the modem. OR, Sprint did something to disable the feature, need the code to enable the feature.
Anybody ???
Click to expand...
Click to collapse
Are you sure you are connected to the phone itself and not to the original wireless network? Your upload speeds seems out of place... even on 4G it should be close to 1 Mbps, download speed also seems suspicious... a few members have hit 10 Mbps but 13 sounds way off.

Are you sure you are connected to the phone itself and not to the original wireless network? Your upload speeds seems out of place... even on 4G it should be close to 1 Mbps, download speed also seems suspicious... a few members have hit 10 Mbps but 13 sounds way off.
Click to expand...
Click to collapse
i agree.
the phone is picking up the data connection from the router, and passing it along to your laptop. therefore the laptop is just getting its net from the router as well. you are not "tethering" off of your mobile data.

I have the same problem.. I called Sprint and they said I had to pay 30$ to use the usb modem.
By the way, I tested my speed in NYC and it reached 10Mbps on download and 1Mbps in upload. There are some places in NYC where you can get 4G signal.

lol... your just using wifi from your router

Ok, so I use easytether and wireless tether sometimes , but my download speed on my laptop compared to my phone are terrible. Is this a normal occurrence, or am I missing something.
sent from my iPhone 4...........destroyer.

Can't tether after ICS then factory reset

I'm not rooted and updated to ICS this morning. Brought my transformer to work with me since I was excited and was tethering to my phone via ad-hoc fine. I then decided to do a factory reset to clear up the tablet and do some optimization. Next thing you know I can no longer tether to my phone so now I'm stuck without wifi.
My tether network shows up in the available wifi list but when I try to connect it just saves the network but not connect. Does anyone have suggestions on how to fix this?

There is no reason that a factory reset would block it from being able to connect to a ad hoc network. The only thing that I can think of is that you typed the password wrong but like I said there is no reason it shouldn't work.

I didn't set any encryption on the tether network, it's the only way I was able to get tethering working previously.

Interesting, maybe reboot your phone? Like I said, I really don't think a factory restore could do anything that would prevent this from happening.

I was worried about the tethering. The Prime guys lost it with ics and had to root to get it back.

Yes, I have tried restarting my phone a few times. I was originally using android-wifi-tether 3.1b11 but have also tried barnacle tether, both have the same results. I'm attempting another reset on the transformer now in case I screwed something up on setup. I backed up all my apps before resetting the first time so at least I can install them, but no network access.

Asus had previously fixed ad-hoc in the August OTA, but it looks like the new ICS OTA doesn't have that fix anymore. So, you might try bluetooth pan networking instead. I don't think any amount of factory resets will get your ad-hoc wifi back without actually reverting to a pre ICS install.

I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help

ZeNiTH456 said:
I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help
Click to expand...
Click to collapse
Dude, PdaNet has a (new) version for ICS for free. It does bluetooth and more. You might want to check out.

Just fired up wireless tether, connected to it and browsed the web with no problems.

ZeNiTH456 said:
I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help
Click to expand...
Click to collapse
What did you end up using? The same exact thing happened to me.

34Ford said:
I was worried about the tethering. The Prime guys lost it with ics and had to root to get it back.
Click to expand...
Click to collapse
I came from Revolver. After the ICS update my tether had no issues. I use the app WiFi Tether.
The only thing I noticed is that ICS does not gracefully disconnect after I shut tether off. In fact, the wireless rings for signal indicator grey out but are all still present. After a while, I turned the tether app back on and had to dicsonnect/reconnect wifi on the tab. There was a message like something about "continued poor signal". After the standard off/on of wifi all was good.

Thanks, thats what I was using but I had a really old version. I guess I should update my apps more.

[Q] Root Wifi Issues

Hey guys,
I just recently rooted my s4 and I have been experiencing issues with my wifi. As a first time rooter, I was curious if there are any ideas you guys have to help? Thanks

Rooting won't have any impact on your WiFi or any other phone performance. Have you made any other changes since rooting and what Wi-Fi problems are you having?

I haven't really done anything at all after rooting it. My internet connections just says, "Network disabled because Internet connection is slow". Although it is slow, it has always connected before rooting. Now, I can't even send picture texts or be in group text messages. I've downloaded a few apps, but none that affects wifi.

Do you have this problem on all Wi-Fi or just one? I'd try resetting the router

I have about 5 wifi routers in my house and it doesn't work for any of them. I haven't tried it on a public wifi, but I'd assume it wouldn't work there either. I'm currently posting this from my house, so I know the wifi is working.

My download speed is 9 mbps and upload is 2.5 mbps so I know that the home wifi is not the issues, it has to be the phone. Is there something I could have forgotten to do that has caused this? or anything else?

stoj1 said:
I haven't really done anything at all after rooting it. My internet connections just says, "Network disabled because Internet connection is slow". Although it is slow, it has always connected before rooting. Now, I can't even send picture texts or be in group text messages. I've downloaded a few apps, but none that affects wifi.
Click to expand...
Click to collapse
Same problem here. Already posted about it in another thread. Have updated to 4.3 and eversince the phone won't connect to a wifi network unless it's placed right next to the router. Any other device connects smoothly. Same info when i check the wifi scan "Network disabled because Internet connection is slow". The problem stands for any router, not just mine.
I have already flashed a stock modem.bin, made no difference.
Had any better luck?