Related
Anyone having issues with the Wireless Tether app? Whenever I try using it, my phone keeps constantly dropping its 3g data connection. I also discovered that my WiFi connection on the phone itself kept dropping connections. Couldn't even stream a full minute on any YouTube video without it cutting out. Uninstalled Wireless Tether, and my WiFi has worked fine ever since.
Any ideas as to what the problem might be? Or, is there another wireless tether app I can try?
Sent from my SCH-I500 using XDA App
i use Barnacle (the Legacy version). It works great with my Fascinate. I had wireless tether at first but my mac would never locate the signal. Barnacle hasnt failed me yet.
bcharding said:
i use Barnacle (the Legacy version). It works great with my Fascinate. I had wireless tether at first but my mac would never locate the signal. Barnacle hasnt failed me yet.
Click to expand...
Click to collapse
Ditto.. before you spend too much time trying to get to the bottom of this, give Barnacle Legacy a shot.
I had a similar problem with both Wireless Tether and Barnacle Tether, but once I used Barnacle Legacy, I'm able to tether my iPad!
Wow, you guys are awesome! I've got Barnacle Legacy installed, and it works great! No degradation in wifi performance that I can see. Looks like it uses a different approach than Wireless Tether, which makes it more compatible across different phones.
Only downside I see at the moment is that it can only use WEP encryption, which was rendered obsolete ages ago. WPA support would be a big plus. I don't necessarily have anything to hide, just don't like to make myself an easy target.
Sent from my SCH-I500 using XDA App
Were you using the experimental version? It's working well for me.
http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_5-pre9.apk
Yes, I was using the latest version, which btw is listed as experimental on the website. I don't see a non-experimental one available. In any case, Barnacle is my friend for the time being.
Sent from my SCH-I500 using XDA App
Huh... I could never get my computer to connect to Barnacle. It's got full bars and I have Windows 7. I can't figure out how to make it work for me.
I've tried several versions of wireless tether, barnacle and barnacle legacy and it gives them all root access, but nothing with WiFi is able to successfully connect.
Remember that wireless tethering uses ad-hoc connections, not infrastructure, like your wireless router does. If your wireless devices don't play nice with ad-hoc connections, that could be your issue. Check to see if there are driver updates for the wireless card in your computer.
Sent from my SCH-I500 using XDA App
I'm glad I stumbled across this post. I gave barnacle legacy a try because I was having issues with the latest wifi tether. Legacy works just fine. Thanks for the suggestion!
Sent from my Fascinate the using XDA app.
Anyone notice barnacle legacy dropping connections when trying to stream videos.
I setup the latest barnacle from the market (not the legacy version) and it works beautifully. Have WEP and the ACL up and running, and it works great.
And how do you set up barnacle
Sent from my SCH-I500 using Tapatalk
And has anyone set up barnacle to work on xbox live? I keep getting NAT restrictions with it.
Sent from my SCH-I500 using XDA App
I'm running Vista on my laptop and can't get wireless tether to work with it. My laptop sees the network, tries to connect but wont. My wife's netbook running windows 7 however will connect no problem. Anyone have any ideas on this?
daveydingus said:
And has anyone set up barnacle to work on xbox live? I keep getting NAT restrictions with it.
Click to expand...
Click to collapse
There is a good chance that Xbox live won't work with Barnacle since it uses an ad-hoc connection. I know the PS3 doesn't work with ad-hoc but not 100% sure on the Xbox.
sonar_chris said:
I'm running Vista on my laptop and can't get wireless tether to work with it. My laptop sees the network, tries to connect but wont. My wife's netbook running windows 7 however will connect no problem. Anyone have any ideas on this?
Click to expand...
Click to collapse
Download Winblows updates? Meebe new drivers? Do you have pre11?
NOsquid said:
Download Winblows updates? Meebe new drivers? Do you have pre11?
Click to expand...
Click to collapse
All the updates are current, not sure about drivers. I am running pre11, but have tried 11 as well and get the same results, no connection to my laptop running Vista, connects just fine to the netbook running windows7.
The xbox sees the connection and connects to it, I just get NAT set to strict notice.
Sent from my SCH-I500 using XDA App
Does anyone have issues staying connected to wifi on their Fascinate? It seems that I can only connect for a little bit until it cuts out. It still says I'm connected but if I use the internet it says connection lost. Then when I turn the wifi on and off it works for just a little bit again.
Any help would be appreciated but for all I know, I'm the only one with this problem.
Does it happen just at your home connection or other hotspots too?
Sent from my SCH-I500 using XDA App
All wifi locations
I can't say I have had that problem....what kernel/rom/modem are you running?
Sent from my SCH-I500 using XDA App
I have the same problem but only with the router at my house
I have DL09 kernel modem and ROM, Blackhole 3.0.
zeroasd said:
I have the same problem but only with the router at my house
Click to expand...
Click to collapse
Same problem
Sent from my SCH-I500 using XDA App
FWIW, wifi was absolute junk on my Fascinate when I had the Wireless Tether app installed. After uninstalling it and switching to Barnacle for tethering, wifi performance improved tremendously. Not sure if that's your issue or not though.
Sent from my SCH-I500 using XDA App
Before updating my wireless driver on my laptop, I couldn't connect to the AdHoc network of Wireless Tether (2.0.6) at all...zilch.
After updating my Intel wireless driver to v13.4 directly from Intel, it found and connected to the AdHoc network immediately and is working great now. No wi-fi drops.
I'm going to try Barnacle next. Just wanted to point out that wifi can be drastically affected by your wireless network card's driver...so update it if you haven't. I prefer to update my wifi cards directly from their manufacturer's site instead of the computer manufacturer unless there is no other choice.
Good luck.
My wifi is not working at all after I upgrade the firmware. It kept connecting and then get disconnected. Anyone got this problem?
Sent from my GT-P1000 using XDA App
bubblebob said:
My wifi is not working at all after I upgrade the firmware. It kept connecting and then get disconnected. Anyone got this problem?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
If it was me, I'd check to make sure you're broadcasting SSID on your router. For some reason, at least this is the way it is for me and I would be really baffled if it wasn't happening to everyone else as well, these android devices (I have an EVO and a GT), have a problem with connecting without it being able to see the SSID broadcast. All of my other devices (laptops, desktops, etc...) have absolutely no problems either way (broadcasting SSID or otherwise) connecting to my WiFi setup. Just the adndroid devices.
I had same problem not sure how i fixed it. But i reflashed everything like 1st time
I think it will b the modem file.
BUT check your wireless setting first
Sent from my GT-P1000 using Tapatalk
Can someone point in the right direction where I can turn my phone into a wifi hotspot for free. I have tried wireless tether but doesn't seem to work, thanks in advanced.
Sent from my Evolution
corybucher said:
Can someone point in the right direction where I can turn my phone into a wifi hotspot for free. I have tried wireless tether but doesn't seem to work, thanks in advanced.
Sent from my Evolution
Click to expand...
Click to collapse
are you rooted?
wireless tether works fine. Try disabling encryption and/or access control and see if it works that way
Yes I am rooted but I haven't tried what you suggested. Thanks and I will give that a go.
Sent from my Evolution
OK, so I tried everything you told me about but it still doesn't seem to work. Here is my situation, I recently got an iPad and want to use my phone as a hot spot so I can connect on the go. The wireless tether turns on but neither my mothers eve or my iPad seems to connect to it properly. They do connect but it doesn't let me do any kind of web browsing. Thanks again for any help.
Which app and version are you using?
Sent from my PG06100 using XDA App
I'm running 2.0.6
Sent from my Evolution
Works fine for me... Not sure what the problem would be. Sure access control is off? When you connect your pc, what color is the shield that pops up in your notification bar?
Sent from my PG06100 using XDA App
This seems to be the problems on a number of roms. They only way I've been able to get my wifi tether to work is when I've been bone stock. I don't know what might be broken in the process of cooking up the roms for us but something is breaking it. I get the same issue. It connects to my phone but I get no internet signal. Access control and encryption off. Tried changing the ssid and that hasn't worked. They've been tryin to figure out what the problem is on the IRC channel
Sent from my PG06100 using Tapatalk
mcarrion78 said:
This seems to be the problems on a number of roms. They only way I've been able to get my wifi tether to work is when I've been bone stock. I don't know what might be broken in the process of cooking up the roms for us but something is breaking it. I get the same issue. It connects to my phone but I get no internet signal. Access control and encryption off. Tried changing the ssid and that hasn't worked. They've been tryin to figure out what the problem is on the IRC channel
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
What rom are you using...I have no problems running wifi tether with mikrom
Sent from my PG06100 using XDA App
Again, thanks for all the help. I have tried switching to mikrom and still a no go for me. I have tried everything from changing ssid to trying different channels. Any know of just a rooted bare bone stock rom?
Sent from my Evolution
Not why it doesn't work but now I am on a bare stock rom and still a no go. I have tried connecting my moms evo and it just sits trying to obtain the ip address but for some reason it just never connects.
Sent from my Evolution
As of last night im no longer able to use barnacle, wireless tether, or open garden. I've been running EF 3.6 since its release and just a week ago barnacle worked fine. Now when I connect it continues to say nat down and restarts. The only thing I can of is maybe I updated barnacle and its glitchy but that wouldn't explain why the other two aren't working. Out of ideas, and Im wondering if a noob like me can get some answers.
Sent from my SCH-I500 using XDA App
Have you tried restarting your phone? It could be that the WiFi is in a screwed up state. Enabling and then disabling wifi in Settings might also be able to sort it out.
Yeah I've restarted and reset wifi multiple times to no resolve. I think ill just wait until there is another update for barnacle then see what happens. Like I said though it still doesn't explain the other two not working. Any more suggestions though? I hate it when something works then stops for unexplaniable reasons...
Sent from my SCH-I500 using XDA App
This is exactly what it says when I try barnacle. Nat:restart: network is down. Waiting for uplink interface....and when I try garden or wifi tether it lets me connect my laptop with win 7 (the only device I've been trying) and everything looks fine but no data is transferred. Soo weird.
Sent from my SCH-I500 using XDA App
Barnacle works fine for me, neither wifi tether nor open garden do. I know that doesn't help you resolve the issue, but it may hint that the issue isn't with the barnacle version.
Im thinking most of the success people have with OG/WT are on different phones or a previous version. I tried to install an earlier version of both and it told me that I had insufficient space which was complete bs. When I tried the latest version it locks up constantly and apparently hates it when you try to change a setting while the wifi is activated.
Sent from my SCH-I500 using XDA App