I'm not a developer. One day maybe but for now I only marvel at those who can actually create applications. But I could really use this app. Perhaps there is a developer that could too and will run with the idea?....
The Application: Task created by one button press on PPC that records an audio task reminder, creates task dated today with subject "Audio Task" and attaches the audio clip to the task.
The idea is that you can create tasks on the fly with 1 button press (say you are driving or whatever) as long as you have your PPC and remind yourself later. 1 press and say "Pick up beer for Friday" (okay not likely I'd forget that, but you get the idea). It beeps to confirm it worked and then the task is created and shows up in outlook after syncing.
For me this task then shows up in my outlook 'today's tasks list' which I live out of and I can take it from there.
How hard would this be to build? Just a script of some kind I'm guessing - maybe not as I say I'm not a developer. Any takers? Should I pass the hat?
Cheers.
Nice idea.
I'm quite busy right now, but consider using PocketMax AlarmToday, or alternatively a poor man's alternative is to use the built in Notes Voice recorder (hotvoice) and couple it with the plugin AudioNotes, to show your audio notes count on the today screen.
V
The key is getting it into Outlook....
vijay555 said:
Nice idea.
I'm quite busy right now, but consider using PocketMax AlarmToday, or alternatively a poor man's alternative is to use the built in Notes Voice recorder (hotvoice) and couple it with the plugin AudioNotes, to show your audio notes count on the today screen.
V
Click to expand...
Click to collapse
Vijay thanks for your comments. And yours suggestions are good and get the solution part way there, and as you say would serve as a stop gap.
But the key to this app (and people loving it) is that it integrates seemlessly into the way they manage there lives now. For me (and I've found for a suprising number of people) everything flows through outlook, having another location to check, even on as front and center as the today screen, simply won't do.
The key to the idea is to have a zero headache and 100% reliable way to record and then forget a task until it needs either done or alocated to the day it will be done.
I actually thought I was a bit of freak managing a lot of my life through tasks but I have come across a bunch of people that are way more organized and 'freaky' than I am.
Anyway, thanks for you suggestion. If you get some time and find this interesting let me know. I could draft up a non-technical spec doc pretty quickly. I've got several versions in my head starting with a basic utility to do what I mentioned (which is all I'm really after), right up to one that uses speach to text to fill in the details for you and location positioning to remind you to do things based on where you are (ever been right near the dry cleaner but forgot to pick up the cleaning?). But that's a whole other story.
Cheers.
Hmmm. Speech to text is something I'm still working on.
I'm unlikely to get time to focus on this immediately, but if you see me loitering on streetcorners some weeks hence, stop me and ask me if I'm still "doing business" - ie send me the spec over.
Thinking about it in theory, it doesn't sound too bad. Use POOM to create a new task, use the sound/voice recorder control to embed into the associated note, grab the current date etc. However, like all programming, theory is easy, execution takes time and Jolt.
I use tasks for staying on top of updates for my apps - it's the only way I'd remember all of the requests, otherwise I'll forget everything. My brain is useless Needs a firmware update.
V
Loitering on street corners hey. Be careful who you meet doing that sort of thing. :shock:
I'm in our same boat, very pressed for time at the moment (just started a new job with Siemens), which is one of the things reminded me why this app would be so handy. That said I'll see about putting a spec together.
Ya I like the theory too, but that's as far as I get. But as you say it seems a lot of the foundation is there from existing apps. I guess it just depends how easy ol' MS has made it to work with them. Does POOM have a reasonable api?
If you know of a Brain Firmware upgrades other than the stock version sign me up. Without task to keep me on track I'm lost.
We'll just see how the time comes together and seeing as I can't help on the programming side I'd be more than willing to provide the jolt. :wink:
Cheers.
I program in native pure C++. In that, POOM has a horribly arcane API. It's much easier in .net, so if anyone wants to try their hand at it, jump in.
But I'm not a .net convert yet... too sloooow.
V
Not that this is a substitute for the OPs original proposal (which is really nice),
here is an interesting AudioNotes/Today Plugin combo that is meeting you half way...
Blade's Audio Notes
Of course Blade uses .net (1.1 in this case) so it does run slower than C++, but it's free
Blades Audio Notes is a start. But can I send my Boss to blade when I forget to make the phone call because it Outlook wasn't reminding to do it? :wink:
Am I the only one that uses Outlook pretty strictly to manage getting things done? Just curious. I've been called worse than "outlook freak" before and likely again...
...but thanks for the heads up malatesta.
Hey guys I hope you dont have any objections to this, if it is against any policies you have just let me know.
Ok the meat is, I am forming a very early stage start up.
I am UK based with (sadly!) no language skills so youll have to be English speaking.
I am seeking a developer to help me put together a prototype software suite.
I do not know this platform AT ALL, so youll have to know how to acces databases via vpn.( may need knowledge of the server side too) youll also have to understand the operations of the bluetooth stack with regards to sending print files.
And lastly you will need to be able to implement and debug a visual input sytem.
Its actually quite basic stuff, but I have no time to learn it as my bank wants to see a prototype ASAP.
Again I apologise if this is against your policy, but I need to get the ball rolling.
To clarify, as I am currently in patenting process I cant discuss much yet, but this can go two ways;
1: If you have the skills I need and spare time we agree on a price and timescale, I pay you for your work, then you walk away.
2: We discuss the project, you come on board with skills provided in return for a percentage of company.
This could be a great oppurtunity either way.
Thanks for listening.
I would prefer an email at [email protected]
What will it take?
I was disappointed to see no responses but oh hey!
SO? what am I doing wrong? what would it take to get some development skills in my pocket?
I would offer a go on the missus but shes not speaking to me right now for ignoring her.
Any advice pos' or negative would be cool.
Cheers guys.
If I were you I'd scan the Development forum and look at our community developers to see what they have done. Some of the more popular and highly respected are
A_C for S2U2 and S2V
Tene for PocketCM and PCM Keyboard
Thundershadow14 for PocketMelody and PictureFlow
DotFred for TaskManager and PPCPIMBackup
Vijay555 for (too much to name)
Slither2006 for SCLPC++
Grumps for iPhone App
I'm sure I missed out a lot of others with some real quality stuff. But I'm just naming off those who has produced software that I use most frequently and/or always see at the top of the Development forum cause the thread is so active. Sorry if I offended anyone by not naming them.
So check out the guys that I listed above and see if they have exhibit the skills that you need require for your project. Also if you need help with the design-side we also have plenty of good GUI/skinning guys.
Appreciated.
I will go check the area you suggested, so thanks for the heads up.
At the moment I am just interested in a rough and ready usable system to show the bank, but Ill definately remember your offer if they like what they see.
Again, thanks bud. And wish me luck.
PS If I wanted to learn the coding myself, do you think it would be completely improbable to do so myself in say 4 weeks?
(I am a mechanical engineering student so not completely dense but pretty busy).
And where would be a good place to start?
Thanks in advance.
You have to find a C++ book and get comfy with that. Then you'd have to look at the Windows Mobile SDK and combine the knowledge of both. Plus its trial and error because its running on different hardware.
Its a daunting task. It took me a good year fulltime to become a decent website developer. The hard part is thinking like a "programmer". Otherwise it'll look like its an alien language
Good luck with it.
Hey Mate,
I'd love to help although I've never worked in the areas you require. I'd recommend posting a slightly more detailed job requirements criteria so you may attract the right young budding enthusiast.
If you're creating software a bank will wish to use then the security side of the VPN will need to be top notch along with the methods in which the app will access data.
Unfortunately I'm more of a GUI designer and the only databases I access are the MS POOM databases for Outlook.
Good Luck!
Can I add I'd _never_ take someone seriously who's asking to reply to a hotmail.* / gmail.* / yahoo.* etc etc, address.
kirstan said:
Can I add I'd _never_ take someone seriously who's asking to reply to a hotmail.* / gmail.* / yahoo.* etc etc, address.
Click to expand...
Click to collapse
Erm Ok !!! I dont know what to say to that. That is the account I use most often. I didnt claim to rep IBM! This is a personal project and Im just trying to make contacts.
Regarding an other post above, The VPN is further down the road and not needed yet. Also the software will not be USED by a bank just shown to them as a proof of concept.
At that point I would be able to go beyond an overdraft to an actual business loan and be able to contract a developer.
It is hard for me to Give much detail without an NDA as my idea is not revolutionary but the application is novel.
If I were to discuss openly I would lose the ability to patent down the line.
It is essentially A GUI that I need, and a simple underlying app which will give me the ability to enter a small description in 30 odd fields.
When each field is selected a score of -1 is applied (the field value is initially zero).
At the end of a session, ( there will be an option to open new or close a session) a score is given to each field and depending on score, one of 90 text files (3 per field) is linked to.
A print file containing these 30 text files on one page and a score from 0 to -10 for each field in a table on the other page is then produced.
The database access and VPN would come later on but in the prototype that is all thats needed.
Im sorry thats about all the exp' I can give in open. But if you feel you could help and would like to get involved I could arrange an NDA.
I am currently speaking to a couple of people but there is nothing concrete yet so if at all interested, do get in touch.
Thanks for reading (and please take me seriously whatever my Email.)
solved.
Just in case anyone was interested, I finally found help on a site called Rentacoder so if anyone else is looking for development help, try there.
Cheers.
Trace-Me enables you to trace where you’ve been and augment that information with pictures and stories that you’ve taken on the road. It’s especially nice for holidays or any other trip. It can be used by yourself to afterwards see where you’ve been and what you’ve done, but you can also give your friends and family the opportunity to watch where you are live in real time.
Trace-Me is in beta and is free to use.
for more information goto: www.traceme.org
Interesting app.......
cool idea.
I guess it uses only GPS and not any triangulation stuff.
So, my qtek s200 is off the table.
For now it only uses GPS that's right. Triangulation would be a nice feature to add. I'll scribble it down on my 'wanted features' list.
Neat, I love the idea.
Triagulation
Yeah.. i´m out too.. please please use triagulation also...
google must have some api for it... as google map mobile uses triangulation...
I'm developing for (Compact) .NET. So I would need some C# code to do the triangulation or at least get the cell ids and hook them up to some database. Feel free to leave any tips behind.
of course you can always use an external GPS if your phone doesn't have an internal GPS
I've managed to get some code working that uses cell ids to fetch position instead of GPS. So all people without GPS enabled phones should now be able to use Trace-Me aswell.
Since this is pretty fresh stuff I could really use some volunteers for testing this stuff. Please send an email to [email protected] if you want to test this stuff. Or goto the Trace-Me forum (goto English->General and reply to the 'volunteer to test non-GPS location algorithm' topic)
Ok it seems I've had some major problem with people trying to access the website and actually see their data. Something with cross domain and flash and webservices and all that jazz.
Since the webservice is running from my own domain I would very kindly like to ask a bunch of you to visit this link and please tell me that you're seeing (should take about 1 minute MAX!) a drives list at the left side of the screen (16e heenreis, 17e lagos, etc, etc).
Just leave a reply in here thanks!
I'm seeing your drives list.
k, awesome, it seems to work for everyone now
My team has been vigorously working on a CAD application for android. I will post some screenshots of the tool if anyone is interested, so please let me know.
It's currently being tested and developed using a Motorola Droid running 2.0.1. Although we can run the emulator and test different screens using it, we find great difficulty in knowing if the "feel" is nice on a smaller screen.
Anyway - current features that are working:
Objects: Line, Circle, Ellipse, Rectangle, 3 Point Arcs, Text Areas
Drawing Modes: Orthographic (including 45s), Grid On Off, Snap Mode On Off (Endpoints, Centerpoints, Midpoints, Quadrants)
Other Things: Undo, Redo, Erase, Modify (reshape & move), Pan, Layering System, Linetypes, Colors & Text Sizes.
In The Works: Zoom (Option for Pinch), Configurable Toolbar (Add/Remove Tools), Export to DXF & Linetypes.
We are looking for a few people that would be willing to get in on a "PRIVATE Beta" to assist us with the continued development. We have our day jobs, so this is a project that when we have time to work on, we do. However, we do spent quite a bit of time working on it .
Anyway - We want to be picky about the testers, simply because we need to have a nice round group of people. Not plumpy, just round. We need a couple guys that are good with input, finding problems, etc. And we also need a few that dont know anything about CAD and can help us to see if the average joe can figure it out.
We also need a couple good mathmeticians or programmers. Or even one would do. We are having some trouble computing certain boundaries (ellipses to be more precise) that we need to understand so that we can build in other commands like Trim or Extend. (Plus our select option on ellipses is a bit hokey, but knowing how to find an ellipse will solve that for us)
For now, the only assistance I can give you is through the board here, and help you get started. The tutorial will come soon, once we get the basics figured out as to how we want to make it really work.
Anyway - To make a long story even longer - let me know if you might be interested. I would be more than happy to post some screenshots if you like of its current state. So let me know if you are interested.
Thank you very much for sticking through the long a$$ read, or even for skipping through to the "thanks" is enough for me.
That being said - LMK! Thanks!
A capacitive touch screen doesn't seem a good candidate for controlling a smooth CAD experience. However on second thought, when coupling together this technology with a trackball, the possibilities really open up. Harness these well and I know you'll be onto something here.
Post some screens to show everyone the progress of your development and I'll let you know if I'd be interested in testing.
Cheers
Well if your looking for anyone with CAD knowledge, I have a degree in engineering with CAD, and Pro Engineer. I don't have much time to devote to beta testing, but I do have time every now and then. I run a ION with 1.6. Good luck on your software!
(Unfortunately - my account has not been enabled for posting outside links or images - so this is the best i can do for you until that is enabled)
talon-designs.net/android/andcad/11.jpg
Above is a screen shot with a couple drawn elements, and the right side of the toolbar tools.
talon-designs.net/android/andcad/09.jpg
Above is a screen shot with a couple drawn elements, and the left side of the toolbar tools.
There are a handful of more screenshots posted up on my site, the links are as follows:
talon-designs.net/android/andcad/01.jpg - Layer select screen
talon-designs.net/android/andcad/02.jpg - File Operations
talon-designs.net/android/andcad/03.jpg - Display Settings
talon-designs.net/android/andcad/04.jpg - Samle Help Screen (Line)
talon-designs.net/android/andcad/05.jpg - Snap Settings
talon-designs.net/android/andcad/06.jpg - Color Picker
talon-designs.net/android/andcad/07.jpg - Snapping to Midpoint
talon-designs.net/android/andcad/08.jpg - Selection of Ellipse
talon-designs.net/android/andcad/10.jpg - Text Input Screen
That should be plenty of screens to keep interest.
@Lancealot - Thank you very much, and I completely agree, that when we started this, there was some doubt as to how precise you could actually be using a "touch based" screen. The good news, through playing with it, and given ability to set tolerances based on the size of your "touch area" as well as snapping options, we found that you can actually be quite precise.
Ill fiddle with it a little today, put together a drawing and give you a nice example of something that can be made with this.
Keep in mind, this is a work in progress, and although much of the functionality that is currently built into the tool, is at a "finished" state, there is certainly room for input and comments from others that may find use in this tool.
Anyway - here are the screenshots as promised, let me know if you have any further questions.
(Again - sorry about the inconvenience on the links)
(edit to update image types to jpg instead of png)
@zul8er - we are certainly interested in your input. Check out the screenshots and let me know if you are still interested. We dont need a huge commitment, but anything that you might be able to provide would certainly be a big help.
Android 1.6 is the minimum OS currently supported. We need to do some work on the graphics to go as far back as 1.5 to compensate for screen size, and we intend on doing so.. Just not at this current time.
I would be interested in trying out your CAD program. I've been doing CAD for ove 10 years now, started with AutoCAD but have been using Solidworks for the last 8 years.
In addition to using the touch screen for input, will you be able to enter X and Y coordinates using a keyboard or virtual keyboard?
What format will it save the files? DXF, JPG, or what?
Noob Squared said:
I would be interested in trying out your CAD program. I've been doing CAD for ove 10 years now, started with AutoCAD but have been using Solidworks for the last 8 years
Click to expand...
Click to collapse
Seems there are more and more of us creeping out of the woodwork on a daily basis
Noob Squared said:
What format will it save the files? DXF, JPG, or what?
Click to expand...
Click to collapse
Currently the file format is a proprietary format. But we are currently (today actually) working on saving out to a DXF format to be able to reload your files into AutoCAD or other supported softwares.
The ability to import is also in the works, but will require some massaging on the users end to make sure the DXF file is not binary etc. (MTEXT may not be supported either)
Noob Squared said:
In addition to using the touch screen for input, will you be able to enter X and Y coordinates using a keyboard or virtual keyboard?
Click to expand...
Click to collapse
We have toyed with the idea of being able to put in specific dimensions on objects, and also work with x/y coords, but at this time, it only supports point to point drawing. We arent completely sure if we intend on building a "FULL ON CAD" application, or an application for people to use to simply get an idea of what they need to do for a job. The other key, is to keep the application at a price range that is reasonable for people. Most "PocketCAD" applications run around 50 bucks a copy - and rightfully so. To keep the tool at a reasonable range (below 10 or 15 dollars) it may need to be a bit lighter weight than those. Most people cringe at a 2.99 app..
IF we could devote our time 100% i am sure we could build a really nice full blown cad app Unfortunately as with most of us, the day job prohibits some of that time.
Its a WIP I'll put you on the list. Thanks for the input.
Are you looking for beta testers?
Hi, are you looking for beta testers. I'm a long year CAD user, and I'm sure I can help with the app development.
[email protected]
Have you tried using some of the java based cad software as a source for your project? There are many and some might be open source.
http://sourceforge.net/projects/ycad/
Yeah I am still interested. It will be neat to play with and see how it works. The coordinate input is a good idea, also, ever play with Pro Engineer? They have a cool way of building an initial drawing. You just sketch, regen, and then input your dimensions to make the object to your liking. Makes things a lot faster and easier to edit a shape if changes need to occur.
I dont know how in depth you want to go, or if that idea can be used.
My email is [email protected]
Nice
Give me a couple more days to get a good product out for you guys to test. Currently we are cleaning up a few little "we'll get that later" issues, and should be good to go by mid/late next week.
Thanks for providing the contact info, I will shoot you a message through email shortly.
Thanks agian for the interest.
@zul8er: nice. Look forward to hearing how you like the feel of it. I havent had a chance to play with ProE, as AutoCAD has been my forte for the last couple decades. Ill see if i can any kind of demo for ProE, and get an idea of how it works. Who knows Anything to make it easier for everyone is a good thing.
But yah - the indepth thing is the issue. We keep tossing with ideas and putting them "on the list" in case people start asking for them. I guess it just depends on how people really want to use this tool. (and of course, how much time we can continue to devote to it) - bah i hate day jobs
I enjoyed the screen shots that were posted. Any idea whether you guys will support rendering/raycasting, or physics with inverse kinematics? Either way it looks great; Sign me up!
haha Not sure if we are going to go the IK way. Maybe as a different project, something more suited to 3D, but for this app, we are only intending on running the 2D route.
My lack of knowledge about the OpenGL portion, really limits us with regards to 3D implementation. I spent a good 3 days just trying to get ahold of loading in a 3D model.. Still never got there (or would have probably released a 3D model viewer first).
At any rate, its hard to say where this will go. It mostly depends on the overall interest i suppose. Its certain that the sky would be the limit, if time were as available as the sky
But cool.. Glad I was able to keep your interest.
Currently (as I type even) I am finishing up all of the help documentation for the app, the inline tutorial, and what not.. A couple more days on the file handling (DXF in particular) and should be set to go for a BETA run. ('couple more days' - like we all havent heard enough of that)
@lancelot - can you send me your email address via private message? That way I can do the BETA communications through there (link to files etc). You are welcome to email me as well:
support AT talon-designs.net
cheers!
Hey, I'm a high school student that has just started learning CAD, does that count as average Joe? I'd love to help beta test, I really want android to overpower iPhone 3.0 lol. My e-mail is [email protected] I use g1 with cyanogenmod 1.6...so idk if that qualifies. But anyways, Good luck!
This really sounds promising. In the last few weeks, I really had the need for a good drawing software on my mobile device. But my Tytn II lacks of power. As I soon will get the Desire, I will hopefully have a quite powerful device for all day use (my Tytn II really sux atm). And because I have the re-occurring need of a drawing app, this could be it.
I mean I don't need it for simple drawing, but for constructing things CAD style and on the go Graphics of furniture or something with measures and all that stuff.
Hey guys.. just wanted to pass you an update on status (which is so much more than I seem to be getting from Verizon on the 2.1 update).
Small rant, but its done now.
Ok - status..
DXF Export is working now, supporting layers, linetypes, colors, and elements throughout the drawing. Am having some issues with getting ellipses to export via DXF (and im not alone - faulty specs are at fault), and that combined with the other issues regarding the math behind finding ellipse edges, we decided to comment out the ellipse alltogether for now. Not that it wont be back, but having so many rules with "you can do this to anything - except an ellipse" left us with no other choice.
It's coming back, just not right now.
We have saving and opening completed (simple proprietary ascii format, but it works for what we need it to do).
Zoom is currently partially working (difficult to complete the recalculation on the elements, but its really close) touch events for zoom are coming up as well. Maybe a pinch zoom even, considering that all devices are getting the 2.0+ upgrade - but we will see.. We dont want to keep anyone excluded from being able to use the tool.
@Balrog82 - we have definately taken this tool a long way since its initial conception. We hope to be able to bring more features that are more "CAD Specific" to the application, and will if it becomes a tool that gets used. We want to release it initially as a "basic" drafting tool, and see what kind of input we get. If we see that a lot of people are using it, and would like the ability to put in dimensions the same way that cad does (within limits) we will certainly look into it.
That being said - I hope the tool is still something you would be willing to try out. I find a lot of enjoyment with working with a tool at its early conception (started using paint shop pro at version 1.42) and now its on to version 14 or something and owned by corel. I just kinda get into that sort of thing, and hope that you all will do.
Good thing is, we hope its a draw to the tool, we plan on releasing it at the market both as a free version (no saving abilities) and a full version at a low price. As the tool grows, the price may increase a bit.. Keeping of course the original buyers at a place that they can keep updating the software at no cost to them. We think that will help the advancement and development of the tool quite a bit.
Anyway - It is right around the corner for initial testing. Please to all interested - send me a PM with your contact information (just an email would be great) I am going to see if i can start a private discussion here to invite you all to as well.
@Lancealot - i got your PM.. Am very happy that you are interested in helping. Expect to hear from me again soon..
Until we can see a working model of this app, I thought I would throw out an app that has some great drawing capabilities. The paid was is called "Picso" by Tiki Move, but I used the free version to try out; it's called "Picso Lite".
It's not a CAD app, but it's different from the other Paint apps on Android in that it has tools the other ones don't. It has the usual tools a CAD user would need, such as Rectangles/Squares, Circles/Ellipses, and Lines. You can change the colors and widths of these entities.
What I like about your program is that it has snaps, and the tools are on the bottom of the screen so they are easy to get to: /talon-designs.net/android/andcad/07.jpg
A feature Picso needs is a Zoom tool so you can zoom in to an area and draw whatever you need to and then be able to zoom full screen. It also needs a text tool. Since there is no dimension tool, you could put a text for the dimension.
P.S.,
I want to try your app, but I am only posting this to show how someone else has put these tools on their app and also to have a comparison on ease-of-use. One other thought, you mentioned the files your CAD app will create will be proprietary file types. Will you be able to save-as .jpg or .png so you can email or text-message a sketch to someone? That way if your on-site you will be able to send someone back at the office whatever it is to explain your ideas, and also they would not have to have an Android phone to view it.
Idea sounds great. Good luck with it!
Sorry for being away for so long.. but we had something going on that we had to attend to..
http://developer.att.com/developer/index.jsp?page=event&id=6.3_v1_9700324
More news as it allows.
Android Category Winner
Talon Designs, AndCAD
This application allows users to create simple geometric shapes, combined with notes, to describe plans associated with the art, architecture, engineering and manufacturing industries. Many of the tools familiar to CAD users are incorporated into this utility, meaning that fluent CAD users will feel right at home using this tool. However, the interface for this tool is simple enough for even the most novices of users to understand. This enables certain users (Contractors, etc) to be able to take notes while on a job site and associate them with vector elements within the drawing.
talondesigns said:
Sorry for being away for so long.. but we had something going on that we had to attend to..
More news as it allows.
Click to expand...
Click to collapse
AT&T Open Call-Apps for All! Contest
Thank you to all the participants in the 2010 AT&T Open Call—Apps For All! Contest. This year's contest was filled with many great entries. AT&T reviewed over 90 applications this year ranging from games to business applications. The winners from each category will receive $10,000 and co-marketing opportunities with AT&T.
Click to expand...
Click to collapse
Did you get $10,000?
Hi. I'm currently taking a degree in Computing, and one of the courses is visual programming. Now the lecturer is the person to make me buy my first Android phone (Hero) and from that, I've become hooked, purchasing the Desire and Desire HD. Seeing as we are both large Android nuts, and have managed to convert all par one person in the class to Android, he has chosen for us to program a simple currency converter for Android 2.1-2.2. I have some knowledge of Rom editing etc, but non of programming...
With this, I have searched about, but can only find programs/guides to help with pre-eclair Android, so if any help pointing me into the right direction? I plan to try make the app with eclipse unless I find an easier alternative.
Android developer site has tutorials for 2.2.
You can post your questions either here or stackoverflow later
Yea the android developer site is the first port of call.
Also check out the examples in the SDK - will get you started.
its deadline day coming up, and with all the help with google.developers resources, I have sort of made a program, but cannot finish it off.
A basic currency converter, with 2 activites (main) and (admin - allows changing of rates)
I for some reason cannot implement data storage.
Using the guide here, http://www.vogella.de/articles/Android/article.html, I built my currency converter roughly upon this, but haven't been able to link changes in my currency rates to my formula (USD * 0.64) instead of (USD * inputed currency rate)
Anyone able to point me in the correct way? As i've had several errors with float and read from/write to issues.
This is only for coursework, and will not be put onto the market at all.
And before anyone mentions, this isn't the primary subject on the course...it's an annoying subject needed for the pass.
You need post the code and the actual errors you're getting, otherwise we are just having to guess what your problem is.
Yeah, not sure what you're doing. Sounds like you need an internal database that stores your conversion rates.