I've achieved permroot via the tutorial and am using a mac, but so far have not been able to flash a recovery to be able to do ROMs. Whenever I do the fastboot command
./fastboot flash recovery recovery.img
< waiting for device >
I get that, and it does nothing. Any ideas what's going wrong?
Have you set your phone to Fastboot mode? You have to select fastboot from the bootloader, just a guess
Did you place the recovery image in the sdk tools folder?
powered by the tears of a million orphaned alpacas...
Yep it's in the proper folder. Putting the phone in fastboot mode? I haven't heard of that. It is plugged in with USB debug on. I leave it on the main screen.
If you're following bcnice's instructions and you hopefully have the fastboot.exe in a folder you put into your Windows path (AdroidSDK\platform-tools)
You just cd to the directory where the recovery.img is (on the PC) power your phone off, turn on while holding volume down (bootloader) select fastboot (I believe is says something like fastboot-usb when it's ready, then just type in the command:
fastboot flash recovery recovery.img
you will see the transfer happen then you boot into recovery (on the phone) and if you got it right it will now be a black background with green font
go to backup/recovery, select recovery, there's your Nandroid!
I just did this today so I feel your pain but I've already flashed a new ROM and the OC'd kernel so I'm sure you can get the hang of it. Fun fun fun.
Edit: Sorry, didn't see you were using a mac... I have no experience with those. It may be in your best interest to have the recovery.img in the same folder your fastboot.exe is
You know you don't have to fastboot to do recovery..you can just push the files
Sent from my PG06100 using XDA App
Or...
1) Download the recovery you want (either CW 2.5 or CW 3.0).
2) Download Rom Manager from the Market.
3) Flash Clockwork Recovery from the Rom Manager main menu. (Make sure you select HTC EVO CDMA).
4) Open File Explorer, go to ClockworkMod/download/mirror1.kanged.net/recoveries and rename the recovery file to "recovery-clockwork-3.0.0.5-supersonic1.img.
5) Move the recovery file that YOU want into this folder, and rename it to "recovery-clockwork-3.0.0.5-supersonic.img.
6) Open Rom Manager and Flash Alternate Recovery.
7) Flash ClockworkMod Recovery (select HTC EVO CDMA again), and it will flash the correct recovery image compatible w/ our EVO Shift.
This set up works w/ any of our recoveries out now or going forward. Simply rename the file each time. Hopefully ClockworkMod will add our recovery to the base soon and we won't have to go through this step, but for now, this is an alternate way to flash recovery for those of you not wishing to use Fastboot, and want to do things directly from your phone.
I have a rooted GT540 on stock 2.1.
When I try to use tethering programs I get errors relating to Kernels and such.
Is there a method to tether without using a different rom?
You can't tether when you're on 2.1 ROM.... at least Froyo is required...
matcho13579 said:
You can't tether when you're on 2.1 ROM.... at least Froyo is required...
Click to expand...
Click to collapse
You're wrong. Use Barnacle WiFi Tether from market instead. Or use Quarx's Custom Kernel that enables the WiFi tether app from google code to work, but you need to have installed Fastboot rom to install it.
Cheers.
Unfortunately Barnacle hasn't done the job either
KenifJambo said:
Cheers.
Unfortunately Barnacle hasn't done the job either
Click to expand...
Click to collapse
All I can suggest then is installing a custom kernel or ROM I'm afraid.
Here is how you can.
Download this:
http://www.mediafire.com/?imautlh0m29cl2t
This has a fastboot ROM that enables fastboot + recovery so we can flash custom roms.
How to install (Guide from MrMentality @ MoDaCo):
1. Go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. If you have your Drivers installed, then skip this: Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete. When phone has rebooted, re-root your phone.
Installing recovery:
You have multiple choices to choose from.
ClockworkMod Recovery 2.5.1.8 (Recommended)
ClockworkMod Recovery 4.x (Recommended but you may run into incompatible .zip files, download the recovery_clockwork_x.x.x.x_swift.zip file)
Amon RA 2.2.1 (Recommended but has issues with recovery backups and usb toggle)
Amon RA 1.7.0.1 (Not recommended due to incompatibility with zip files and recovery backups. Also .zips must be signed)
Download the recovery image of your choice (I recommend 2.5.1.8)
Next put your phone in Fastboot mode by rebooting then holding Camera+Power, make sure USB Cable is plugged in. Also let Windows search Windows Update for drivers.
Download fastboot.exe from here: http://adf.ly/2M8Hi and extract it to the desktop. Also put the recovery image you downloaded onto the desktop too.
Open a command prompt and type the following:
Code:
cd Desktop
fastboot devices (if you see ? fastboot then your device is recognized)
fastboot flash recovery name_of_recovery.img
fastboot reboot
When fastboot says rebooting, hold down HOME and wait. You should see clockwork pop up. And there you are, recovery on your phone!
Now to install a custom kernel/rom. If you are happy with Android 2.1 and want tethering, go to step 1 and skip step 2. If you want the bleeding edge and want the latest and greatest Android version, skip step 1 and go to step 2.
Step 1:
Download the boot_666_MMXTREM_init.d.zip from here. Also grab addons.zip from here.
By using the volume keys, go down to Mounts and Storage, press call button, then go to Mount USB Storage, press call button again. On your computer, put both .zip files on the SD Card. Then press call button on phone. Press back until you are at the main screen. Now go to 'install .zip from sdcard' press call to select and press choose .zip, then go down to 'boot_666_mmxtrem.init.d.zip' and select that, then go down to yes and then select, wait until install finishes. Now go back into install.zip and do the same for the addons.zip. When that is finished, go back to main screen and go to 'advanced' and select Wipe Dalvik cache, select yes, wait and then reboot phone. Now try to tether and it should work no problems.
Step 2.
Download any ROM you want from the GT540 section here on XDA.
It will come in either three formats.
Fastboot- boot.img and system.img
Recovery .zip- a .zip file that contains boot.img, and two folders, META-INF and system. DO NOT EXTRACT THIS.
Recovery Backup- boot.img, system.img, data.img, and nandroid.md5
For Fastboot, put phone in fastboot mode, put system.img and boot.img on the desktop, open a command prompt and type:
Code:
fastboot -w
fastboot erase system
fastboot erase boot
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
For recovery.zip, put the .zip file on SD Card (if you are downloading SwiftDroid Recovery version, extract the SwiftDroid_x.x.x.x_recovery.zip put the update-cm-xxxxxx.zip file on your SDCard, not the SwiftDroid.zip one. Then flash in recovery like described in step 1. Remember to factory reset to avoid bootloops.
For recovery backup, put the folder in the ClockworkMod\backup\ folder on the sdcard. Then go to Backup and Restore, choose restore and then choose the backup folder.
Hope it resolves your issues!
Thanks for all that information.
Turns out I was wrong!
My devices don't support ad-hoc so barnacle wasn't the problem.
Found the solution for one of them and Barnacle works.
Still not confident of installing fastboot/roms etc on my gt540 but I managed to find some sort of alternative
Barnacle works for one device (Creative Ziio with ad-hoc enabled)
PDAnet for tablets beta works with browser for my Asus Transformer.
KenifJambo said:
Still not confident of installing fastboot/roms etc on my gt540 but I managed to find some sort of alternative.
Click to expand...
Click to collapse
I can understand your trepidation, but the above instructions are solid and straightforward. I was a bit hesitant at first, but realize that the first steps really involve setting up USB drivers to allow your desktop PC to communicate with the phone, and a program called Fastboot. After that, the installation of the ROM is very simple, and is just a RAR file that you decompress into c:\Android (for example) and run a .Bat file that contains the commands he pasted.
It is well worth it.
Just a quick step by step tutorial to get a Custom ROM working on your HTC One or if you just want to unlock and root!
This guide is especially for the new users, experienced HTC users should already be familiar with this process.
Step 1: Unlock
Go on http://www.htcdev.com and create yourself an account on HTCDEV.
Download these adb/fastboot files
Make a new folder on your C:/ drive called fastboot for example.
Extract the zip downloaded in step 2 to the new folder
Go Here http://www.htcdev.com/bootloader/ and select "All Other Supported Models" and "then begin unlock bootloader"
Yes, Tick both Boxes, Proceed
Skip up to step 8 as we have all we need for the first 7 steps
Power off your phone by holding the power button down for 10 seconds
Power your phone on by holding power and volume down
Highlight Fastboot With Volume+or- then press Power
Plug your phone into your PC and open a Command Prompt.
(windows XP - Click Start > Run > type CMD in box then press OK
(Windows 7 - Click Start > type CMD in search box then press Enter)
Change directory to your folder where we put fastboot files cd c:\fastboot
Type this into your command prompt window fastboot oem get_identifier_token
Select & copy the text as per step 9 on the HTCDev website
Paste your identifier token into the box at the bottom and submit
You Will Very Shortly Receive an email from HTCDev with a link to the second part of the instructions and your "Unlock_code.bin" attached
Download the "Unlock_code.bin" from the email and save it to the same folder that we extracted fastboot files to in step 2
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
The Display Will change on your phone, press Vol + to accept and power to confirm.
Step 2: Recovery
Download the Android SDK (optional)
Download the recovery of your choice, here a few links:
- CWM
- CWM 2
- TWRP
Place the Recovery file you downloaded where the fastboot.exe is (Either in the location of your downloaded fastboot drivers or in the Android SDK directory)
Now open the cmd and navigate to the folder where the Recovery File is located or just open a cmd with shift and right click at the correct directory
Now type:
fastboot flash recovery name_of_the_recovery.img
For example:
fastboot flash recovery recovery-clockwork-touch-6.0.2.8-m7.img
Now your recovery is installed
Step 3: Root
This step is only needed if you want a stock rooted ROM, if you want a custom ROM, skip this step.
Now root your phone with SuperSU by Chainfire or SuperUser by koush
Download SuperSU from this link or SuperUser from this link
Flash it with the Recovery:
Power off your device and then hold the VOL DOWN + Power to boot into the Bootloader
Navigate with VOL and Power to Recovery
Now flash the .zip:
- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot now
Now you are able to flash any Custom ROM.
Step 4: Custom ROM
With htcdev unlock you need to flash the boot.img after every ROM installation
Note: Most of the custom ROMs have a script which lets the boot.img flash automatically with the ROM, so probably the steps after flashing the ROM are not needed.
If you are in a bootlop though, I recommend you to perform these steps and flash the boot.img with fastboot
Download the ROM you want to flash
Open the ROM zip with an archive manager and extract the boot.img out of it and place it in your fastboot directory
Copy the ROM to your sdcard
Now boot into bootloader again (explained above) and choose recovery with your volume keys and power button
In recovery wipe data and cache aka fullwipe before flashing your ROM if you are moving to a new base (for example from CyanogenMod to a Sense ROM, don't forget to backup your data files, like apps) (Often ROM chefs leave a note in their thread if a fullwipe is needed or not, just follow their advices)
Now flash your ROM by installing zip from sdcard
If this is finished, reboot and reboot into bootloader again
Connect your phone to your PC in fasboot mode (choose in bootloader with power button)
Open a cmd in your fastboot folder with your boot.img and type these two commands:
fastboot flash boot boot.img
fastboot erase cache
Then reboot your phone and wait some minutes to see your ROM booted
Enjoy
Video tutorials (for One S but the steps are the same):
Video-Tutorial by Flow-Wolf:
Bootloader Unlock:
Recovery Installation:
Root:
Custom ROM Installation:
I recommend using SuperUser by koush insted of SuperSU. I also made Super Boot to root stock ROM but I need someone with WWE HTC One...
I added a link for koush's SuperUser
hi
i done everything like its writen here, but i cant boot into recovery.. it cames the screen "entering recovery" and then the device is reboot
noob.fl said:
hi
i done everything like its writen here, but i cant boot into recovery.. it cames the screen "entering recovery" and then the device is reboot
Click to expand...
Click to collapse
Yes currently the recoveries are not working, be patient until they work, I will leave a note in the OP
thanks for responce - i will wait :laugh:
ist there any other opinion to put the su binary into system? maybee with adb?
noob.fl said:
thanks for responce - i will wait :laugh:
ist there any other opinion to put the su binary into system? maybee with adb?
Click to expand...
Click to collapse
adb can't write system on stock, you would need a modified boot.img
noob.fl said:
thanks for responce - i will wait :laugh:
ist there any other opinion to put the su binary into system? maybee with adb?
Click to expand...
Click to collapse
I have modified boot.img but it's from .401 ROM. You want to try?
mike1986. said:
I have modified boot.img but it's from .401 ROM. You want to try?
Click to expand...
Click to collapse
im since a longer time no more so familar with htc... can it harm my device or it does not care and the one will run? if cot my one since to day, and its a damn expensive device to brick it at first time... but if it works - je i will try
its like all other androiddevices to flash? fastboot flash boot boot.img?
noob.fl said:
im since a longer time no more so familar with htc... can it harm my device or it does not care and the one will run? if cot my one since to day, and its a damn expensive device to brick it at first time... but if it works - je i will try
its like all other androiddevices to flash? fastboot flash boot boot.img?
Click to expand...
Click to collapse
There is no chance to brick but there is a chance for bootloop
if got the softwarw nr 1.27.206.1 with kernel [email protected]#1 - will it works with your 401 kernel?
Can you pull the system partition so we can enjoy some stuff from the One on other HTC devices?
tell me how to do and i will share
http://d-h.st/2DO
Unpack and run the runme.bat
Dumping may need a while, upload it to dropbox for example
Imho all devs should work together here instead of trying to be the first guy with a deodexed stock ROM
these are just windowsfiles - does not working on my linux, sorry
torxx said:
http://d-h.st/2DO
Unpack and run the runme.bat
Dumping may need a while, upload it to dropbox for example
Imho all devs should work together here instead of trying to be the first guy with a deodexed stock ROM
Click to expand...
Click to collapse
Do i understand it right i do not need to install recovery to get the system dump?
Simply go to your adb dir and type that in terminal:
adb pull /system ./system
optional:
adb kill-server
7za a -tzip system.zip system\ -r (needs the 7za file)
rmdir system /s /q
to pack a zip
simpelsense said:
Do i understand it right i do not need to install recovery to get the system dump?
Click to expand...
Click to collapse
no, all through adb
noob.fl said:
these are just windowsfiles - does not working on my linux, sorry
Click to expand...
Click to collapse
Using ADB (I assume you already isntalled it)
adb devices
adb pull /system ./system
adb kill-server
It will write it in your ADB folder
torxx said:
no, all through adb
Click to expand...
Click to collapse
thought pulling system is a little more magic.
[SIZE=+3]Heisenberg's How-To Guide For Beginners[/SIZE]
[SIZE=+2]Nexus 5X[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[SIZE=+1]Intro[/SIZE]
This thread will serve as a location for basic how-to guides for the Nexus 5X. I'm going to start off with a couple of the more obvious ones and go from there. If anyone has any suggestions for additions please feel free to let me know.
If you're unsure about something please read the FAQ section in post #2 before creating a post to ask a question.
[size=+1]Prerequisites[/size]:
You'll need a working adb/fastboot environment on your PC to get through some of these guides. Below are two options for install.
Please do not install adb/fastboot via any means other than the Android SDK, using other tools (like Minimal adb & fastboot) can lead to an outdated setup and various problems with flashing. You've been warned, other tools will not be supported in this thread.
Option A
Google hosts ADB/Fastboot (platform-tools) for Windows, OSX, and Linux. This is a minimal download, in contrast to Option 2. These links and file sizes may be updated periodically by Google. If using Windows, download the Google USB Driver and follow the driver install instructions. Once you have downloaded the platform-tools zip, extract the file then transfer the platform-tools folder to your desktop. The platform-tools folder contains adb, fastboot, and several other files. Note that clicking any link for platform-tools will immediately start a download.
*Windows: platform-tools. Google USB Driver install.
*OSX: platform-tools. For additional details on how to use OSX and adb/fastboot commands, see post #3.
*Linux: platform-tools.
See Option B below for old method to install adb/fastboot:
Option B
Go here to download the Android SDK, which will give you most updated version of adb and fastboot. Scroll to the bottom of the page and find Other Download Options>SDK Tools Only, and grab the right version for your OS. While it's downloading create a folder in C:\ called SDK (C:\SDK). Once you've downloaded the zip you can extract it into your C:\SDK folder. Navigate to C:\SDK\android-sdk-windows and open SDK Manager.exe. In SDK Manager you need to install the following packages:
Tools> Android SDK Tools, Android SDK Platform-tools
Extras> Android Support Repository, Google USB Driver
Once you have installed those, inside C:\SDK you should see some new folders, one of them will be called platform-tools, within that folder you should see fastboot.exe and adb.exe. I'll refer to this as your fastboot folder/directory or working folder/directory during this guide.
For Option A and B, make sure adb is correctly installed. Open a command prompt from within your fastboot folder (hold shift + right click, select open command prompt here) and issue this command:
Code:
adb version
If it returns a version number for Android Debug Bridge then you're good to go.
You can test adb by connecting your device to your PC while booted into Android (making sure that adb/usb debugging is enabled in Settings>Developer Options) with the screen unlocked and issuing this command:
Code:
adb devices
It should return your device serial number, if so, adb is working.
You can test fastboot by connecting your device to your PC while booted into the bootloader (power + volume down) and issuing this command:
Code:
fastboot devices
It should return your device serial number, if so, fastboot is working.
By attempting any of the processes listed this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches on fire, or turns into a hipster and claims to have been modified before it was cool.
[SIZE=+1]Quick Tips[/SIZE]
How to boot into the bootloader:
Power off your device. Once it's powered off hold power + volume down and the phone will boot into the bootloader. You can also use the following adb command:
Code:
adb reboot bootloader
You can also use an app called Quick Boot to boot into the bootloader directly from Android (root required).
How to boot into recovery:
Boot into the bootloader (see above), use the volume keys to scroll through the options and use the power button to select the recovery mode option. You can also use the following adb command:
Code:
adb reboot recovery
You can also use an app called Quick Boot to boot into the recovery directly from Android (root required).
[SIZE=+1]Index[/SIZE]
How To Unlock Your Bootloader
How To Install A Custom Recovery On Your Device
How To Decrypt Your Data Partition
How To Make A Nandroid Backup With TWRP Recovery
How To Make An EFS Backup With TWRP Recovery
How To Root
How To Install A ROM with TWRP Recovery
How To Install A Custom Kernel With TWRP Recovery
How To Update To A New Build Of The Stock ROM
How To Flash The Factory Images (Return To Stock)
How To Flash The Factory Images (Return To Stock But Leaving Internal Storage Intact)
FAQ can be found in post #2!
[SIZE=+1]1. How To Unlock Your Bootloader[/SIZE]
Go into Settings/About Phone, scroll down and click on ?build number? continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the ?Enable OEM Unlock? checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
Power off your phone then boot into the bootloader (power + volume down).
Connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here).
Check your fastboot connection by issuing this command:
Code:
fastboot devices
It should return your device serial number, if not you need to make sure your drivers are installed correctly.
Once you've confirmed your fastboot connection issue this command:
Code:
fastboot oem unlock
This will erase all user data from the device!
You should now see a screen on your phone asking you to confirm this action, use the volume keys to scroll and the power key to confirm if you're sure you want to go ahead.
Allow the process to complete and then issue this command:
Code:
fastboot reboot
Allow everything to go ahead and once finished you can disconnect your usb cable.
Important: do not relock your bootloader unless your phone is fully stock. You must flash the factory images first in order to remove root and custom recovery (if you have them), if this precaution isn't taken you may end up with a brick. Please see section 10 of this guide for full instructions on how to return to stock.
[SIZE=+1]2. How To Install A Custom Recovery On Your Device[/SIZE]
Prerequisites: unlocked bootloader (section 1). Please read FAQ #7 if using TWRP 3.0.2-1 or 3.0.2-2.
Download TWRP Recovery onto your PC.
Make sure you check the md5 to verify its integrity (where possible).
Place the file in your fastboot folder (this is where fastboot.exe is located on your PC).
Power off your phone then boot into the bootloader (power + volume down).
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter this command:
Code:
fastboot flash recovery filename.img
(The recovery filename in the command will change depending on which recovery you're flashing)
Use the volume keys to scroll and power key to select the Reboot Bootloader option. Once the phone has booted back into the bootloader, use the volume keys to scroll and the power key to boot into your newly flashed recovery. It's now safe to disconnect your usb cable. If using Nougat 7.0 or newer, you must now boot directly into TWRP and flash SuperSU (or your preferred root alternative) so that TWRP will persist between reboots.
When TWRP boots up you'll be asked whether you want to allow system modifications or to keep it read-only, choose to allow system modifications, there's no benefit to keeping it read-only.
Do not flash the version of SuperSU that TWRP offers to flash for you in order to give you root, it is not compatible and will cause problems. When you attempt to reboot out of TWRP it will tell you that it's detecting that you don't have root and it will offer to root for you, skip past this.
Some users need a custom recovery for a temporary period, so they live boot the recovery. In this scenario, the custom recovery replaces the stock recovery until a reboot is performed. Place the file in your fastboot folder then enter this command:
Code:
fastboot boot filename.img
(The recovery filename in the command will change depending on which recovery you're flashing)
[SIZE=+1]3. How To Decrypt Your Data Partition[/SIZE]
This is no longer necessary as long as you use TWRP 2.8.7.1 or newer
Prerequisites: unlocked bootloader (section 1).
TWRP recovery cannot decrypt your data partition at this stage. In order for TWRP to be able to read/write on your data partition (to root or create a nandroid backup) you will need to format it, a format will remove encryption.
Boot into the bootloader and connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter this command:
Code:
fastboot format userdata
Please note: this will erase all user data from the device!
Once the process has completed you can either reboot normally:
Code:
fastboot reboot
Or you can reboot back to the bootloader in order to undertake another task:
Code:
fastboot reboot-bootloader
[SIZE=+1]4. How To Make A Nandroid Backup With TWRP Recovery[/SIZE]
Prerequisites: unlocked bootloader (section 1), TWRP recovery (section 2).
A nandroid backup is a very important thing to have before installing any custom software on your device. It's basically a backup of your stock system that you can fall back on if anything goes wrong or if you just want your stock ROM back. You can also use the backup tool to create a backup of your favourite ROM set up exactly the way you like it. The backup you create can be easily restored using the restore tool in TWRP recovery.
Boot TWRP recovery, select the backup option from the TWRP home screen, check the system/data/boot boxes, and swipe to backup. The process will take a few minutes.
[SIZE=+1]5. How To Make An EFS Backup With TWRP Recovery[/SIZE]
An EFS backup is very important to have, if your EFS partition becomes corrupt you will have no IMEI, and therefore will not be able to use the phone as a phone. Making an EFS backup is insurance against this catastrophic event. Without a backup, restoring your EFS can be extremely difficult or impossible. The backup you create can be easily restored using the restore tool in TWRP recovery.
Please read FAQ #7 if using TWRP 3.0.2-1 or 3.0.2-2. Boot into TWRP and select the backup option from the TWRP home screen, make sure only the EFS box is selected, and swipe to backup. The process will take a few seconds. Keep a copy of the backup on your phone and also keep another copy somewhere safe.
[SIZE=+1]6. How To Root[/SIZE]
Prerequisites: unlocked bootloader (section 1), TWRP recovery (section 2).
Download the latest root method of your choosing to your phone:
Magisk
SuperSU Stable
SuperSU Service Release (SuperSU beta channel)
Or to root Android Nougat 7.0 visit this thread: Use SuperSU 2.78 or newer.
[WIP] Android N Preview
Boot into TWRP recovery and enter the install menu.
Navigate to where you have SuperSU stored on your internal storage and select it.
Swipe to install.
Once you've installed SuperSU you'll have an option to wipe cache/dalvik and an option to reboot system. Wipe the cache/dalvik, hit the back button, and hit the reboot system button. That's it.
Do not flash the version of SuperSU that TWRP offers to flash for you in order to give you root, it is not compatible and will cause problems. When you attempt to reboot out of TWRP it will tell you that it's detecting that you don't have root and it will offer to root for you, skip past this. You do have root, ignore this every time it comes up.
[SIZE=+1]7. How To Install A ROM with TWRP Recovery[/SIZE]
Prerequisites: unlocked bootloader (section 1), TWRP recovery (section 2), vendor.img (section 9).
Installing a ROM is a straight forward and easy process. Before you install anything you should make a nandroid backup (instructions above). Next, install the vendor.img that matches the Google security OTA that the ROM you want to install is based on. Find the vendor.img inside the factory images provided by Google then flash this file with fastboot (section 9).
Download a ROM and appropriate Gapps package and place on your device.
Boot into your custom recovery.
Select the wipe option from the TWRP home screen.
Perform a Factory Reset.
Select advanced wipe.
Check the system, data, cache, and dalvik cache options.
Swipe to wipe.
Install the ROM.
Select the install option from the TWRP home screen.
Navigate to where you have the ROM zip stored on your sd card and select it.
Swipe to install.
Most ROMs will run an installer script at this point but some ROMs have what is called an Aroma Installer which allow you to choose some install options before the script runs.
You will also need to install the appropriate gapps package directly after installing the ROM.
Once you've installed all necessary zips you'll have an option to wipe cache/dalvik and an option to reboot system. Wipe the cache/dalvik, hit the back button, and hit the reboot system button.
[SIZE=+1]8. How To Install A Custom Kernel With TWRP Recovery[/SIZE]
Prerequisites: unlocked bootloader (section 1), TWRP recovery (section 2).
A custom kernel can open up a new level of control over your device, such as overclocking/underclocking, undervolting, changing governors, changing I/O schedulers, adjusting colour calibrations, adjusting sound calibrations, and many other options.
Download a kernel that is compatible with your current ROM.
Check the md5 to verify its integrity.
Enter TWRP recovery.
Select the install option from the TWRP home screen.
Navigate to the kernel and select it.
Swipe to install.
You'll have an option to wipe cache/dalvik and an option to reboot system. Wipe the cache/dalvik, hit the back button, and hit the reboot system button.
Once your phone has booted up you can use a kernel tuning app to change governors, I/O scheduler, clock speed, and other options. Some of the popular kernel apps are Kernel Auditor, EX Kernel Manager, Trickster Mod, No Frills, Kernel Tuner, and many more.
[SIZE=+1]9. How To Update To A New Build Of The Stock ROM[/SIZE]
Prerequisites: unlocked bootloader (section 1).
This method does not wipe your data, so you will keep your apps and settings. You should have no problems, however, if you experience problems you may need to perform a factory reset and flash again. Make a backup first and transfer it to your PC.
Download the latest build via the appropriate factory images for your model (Nexus 5X/Bullhead) here.
Note: Android 7.1.2 and newer factory images do not contain cache.img. Do not wipe the cache.img for this process when using or moving to Android 7.1.2 or newer. If you have wiped cache.img, download the most recent Android 7.1.1 factory image and flash the cache.img from that zip archive.
Unzip the bullhead-xxxxxx-factory-xxxxxxxx (x's replace variables) into a directory on your PC (for this guide we'll use C:\bullhead\).
Once unzipped you should have a folder named bullhead-xxxxxx (x's replace variables). Open it and move the following files to a new directory named C:\bullhead\images\:
bootloader-bullhead-bullhead-xx.xx.img
radio-bullhead-bullhead-xx.xx.img
(Please note that radio and bootloader naming changes from build to build so the filenames and below commands will change with them)
Within C:\bullhead\bullhead-xxxxxx\ you'll see another zip archive named image-bullhead-xxxxxx, unzip the contents of that zip into the C:\bullhead\images\ folder we created before. Now within C:\bullhead\images\ you should have the following files:
android-info.txt
boot.img
bootloader-bullhead-bullhead-xx.xx.img
cache.img
radio-bullhead-bullhead-xx.xx.img
recovery.img
system.img
userdata.img
vendor.img
Boot into the bootloader and connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter these commands to flash:
Code:
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
You can skip flashing the recovery if you wish, but even if you do the stock recovery may be patched on the first boot anyway. So you'll need to flash TWRP and SuperSU again if you need/want those, as well as any other system modifications you may have had.
You'll have to flash SuperSU again now, plus add any mods that you previously had.
[SIZE=+1]10. How To Flash The Factory Images (And Return To Stock)[/SIZE]
Prerequisites: unlocked bootloader (section 1).
This section will explain how to return the phone to be like it was when it came out of the box. This will wipe everything from the phone. If you wish to flash the factory images without wiping your personal data from the internal storage please move on to the next section.
Note: Android 7.1.2 and newer factory images do not contain cache.img. Do not wipe the cache.img for this process when using or moving to Android 7.1.2 or newer. If you have wiped cache.img, download the most recent Android 7.1.1 factory image and flash the cache.img from that zip archive.
Go to Settings/Backup & Reset and perform a factory data reset. This will remove all of your user data from the device (apps, settings, photos, music, etc).
Download the appropriate factory images for your model here.
Unzip the bullhead-xxxxxx-factory-xxxxxxxx (x's replace variables) into a directory on your PC (for this guide we'll use C:\bullhead\).
Once unzipped you should have a folder named bullhead-xxxxxx (x's replace variables). Open it and move the following files to a new directory named C:\bullhead\images\:
bootloader-bullhead-bullhead-xx.xx.img
radio-bullhead-bullhead-xx.xx.img
(Please note that radio and bootloader naming changes from build to build so the filenames and below commands will change with them)
Within C:\bullhead\bullhead-xxxxxx\ you'll see another zip archive named image-bullhead-xxxxxx, unzip the contents of that zip into the C:\bullhead\images\ folder we created before. Now within C:\bullhead\images\ you should have the following files:
android-info.txt
boot.img
bootloader-bullhead-bullhead-xx.xx.img
cache.img
radio-bullhead-bullhead-xx.xx.img
recovery.img
system.img
userdata.img
vendor.img
Boot into the bootloader and connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter these commands to flash:
Code:
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
If you wish to you can also relock the bootloader with this command:
Code:
fastboot oem lock
(This command will wipe all user data from the device)
Important: do not lock the bootloader unless you have first flashed the stock images. Locking the bootloader while you have a custom recovery installed can result in a brick. Please also note that the locking procedure will wipe all data on an encrypted device.
Once all commands/flashes are complete you can reboot the device:
Code:
fastboot reboot
[SIZE=+1]11. How To Flash The Factory Images (Return To Stock But Leaving Internal Storage Intact)[/SIZE]
Prerequisites: unlocked bootloader (section 1), TWRP recovery (section 2). Note: Android 7.1.2 and newer factory images do not contain cache.img. Do not wipe the cache.img for this process when using or moving to Android 7.1.2 or newer. If you have wiped cache.img, download the most recent Android 7.1.1 factory image and flash the cache.img from that zip archive.
This section will explain how to return the phone to be like it was when it came out of the box, except it will not wipe any of your personal data (photos, music, etc) from the internal storage.
Download the appropriate factory images for your model here.
Unzip the bullhead-xxxxxx-factory-xxxxxxxx (x's replace variables) into a directory on your PC (for this guide we'll use C:\bullhead\).
Once unzipped you should have a folder named bullhead-xxxxxx (x's replace variables). Open it and move the following files to a new directory named C:\bullhead\images\:
bootloader-bullhead-bullhead-xx.xx.img
radio-bullhead-bullhead-xx.xx.img
(Please note that radio and bootloader naming changes from build to build so the filenames and below commands will change with them)
Within C:\bullhead\bullhead-xxxxxx\ you'll see another zip archive named image-bullhead-xxxxxx, unzip the contents of that zip into the C:\bullhead\images\ folder we created before. Now within C:\bullhead\images\ you should have the following files:
android-info.txt
boot.img
bootloader-bullhead-bullhead-xx.xx.img
cache.img
radio-bullhead-bullhead-xx.xx.img
recovery.img
system.img
userdata.img
vendor.img
Boot into TWRP recovery and enter the wipe menu, select advanced wipe, check only the data box and swipe to wipe.
Go to the TWRP main menu and enter the reboot menu, select bootloader. The phone will now boot into the bootloader, once it has you can connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here), enter these commands to flash:
Code:
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
Once all commands/flashes are complete you can reboot the device:
Code:
fastboot reboot
FAQ can be found in post #2!
Donate To Me
[size=+1]Frequently Asked Questions[/size]
1. How do I boot into the bootloader?
Power off your device. Once it's powered off hold power + volume down and the phone will boot into the bootloader. You can also use the following adb command:
Code:
adb reboot bootloader
You can also use an app called Quick Boot to boot into the bootloader directly from Android (root required).
2. How do I boot into recovery?
Boot into the bootloader (see above), use the volume keys to scroll through the options and use the power button to select the recovery mode option. You can also use the following adb command:
Code:
adb reboot recovery
You can also use an app called Quick Boot to boot into the recovery directly from Android (root required).
3. When issuing the fastboot flashing unlock command it doesn't work, I only get a list of possible commands. What's going on?
This is usually due to having an outdated adb/fastboot setup. If you installed adb/fastboot by any means other than via the Android SDK this is probably the cause. Visit the prerequisites section in the beginning of this guide to properly install adb/fastboot and ensure that it's up to date.
4. How do I take an OTA or update if I have root or other system modifications on the stock ROM?
You can't take an OTA update while you have root or any system modifications. You'd need to use fastboot to flash the system, boot, and recovery images. It's much easier to just flash the newer build with fastboot, see section 9 of this guide for full instructions.
5. Does taking an OTA update wipe my user data?
No, it doesn't.
6. Do I need to make an EFS backup?
Absolutely yes. An EFS backup is extremely important. If your EFS partition becomes corrupt, your IMEI will disappear and you will not be able to use the phone as a phone. Without a backup it can be extremely difficult (or impossible) to restore your EFS. See the next question for an EFS backup related issue and solution.
7. I have a bootloop after restoring my EFS backup in TWRP 3.0.2-1. What can I do?
TWRP 3.0.2-1 and 3.0.2-2 are the first official TWRP releases with Nougat 7.0 or newer compatibility. Unfortunately, there are separate bugs affecting TWRP 3.0.2-1 and 3.0.2-2. A member of the TWRP development team details these issues right here. This link redirects to a thread in the Nexus 6P forums but also applies to the Nexus 5X. Read the original post of that same thread to learn how to resolve this EFS restore bootloop. You must use ADB and the phone must be booted in TWRP to resolve this issue. These ADB commands work on the Nexus 5X and 6P.
8. Can I flash just the xxxxxx.img from the factory image without losing my data?
Flashing userdata.img will format your entire phone (personal data including SMS/MMS, pictures, downloaded files, etc). You can flash any combination of these partitions (boot, system, vendor, radio, or bootloader) and this will leave your personal data intact. However, any mods that you have installed into system, vendor, or boot will be overwritten and returned to the default factory image setup when you flash these partitions. Flashing recovery.img or a newer version of your custom recovery will replace your existing recovery.
9. After updating my ROM, I get this message on every boot: "There's an internal problem with your device. Contact your manufacturer."
This warning indicates a mismatched vendor and system partition. The vendor partition was formerly integrated in the system partition for previous Nexus devices but is now a separate partition that must be flashed for each Google security update. Download a factory image and update your vendor partition using fastboot so that it matches your rom's OS build and monthly security update. If you have a file explorer installed on your phone, you can determine which vendor.img is installed by navigating to /vendor/build.prop and clicking on the build.prop. The specific vendor installed will be a combination of six numbers and letters listed in all capitals (example: NMF26F) in the ro.vendor.build.fingerprint line. These will always match up with the factory image of the same Android build (six digit alphanumeric name) for this device.
Vendor.img is specific to each OTA and contains proprietary binaries for the phone that regularly receive updates to resolve security risks. If you are a custom rom user, make sure that you flash the vendor.img for the Google monthly security update that you are moving to. Be aware that sometimes AOSP roms utilize the AOSP master branch which has a newer Android build than the monthly security update for this device. You will still need to install that month's vendor.img.
The phone will fail to boot if you mismatch the vendor.img with a different Android version. For instance, a 6.0 Marshmallow vendor.img will not allow your phone to boot on 7.0 Nougat. The vendor.img is typically not included in the custom rom zip but is often available as a separate download in the custom rom thread's first post.
Reserved #2
Reserved #3
OSX, ADB and Fastboot commands!
So you use OSX and would like to use ADB/fastboot, unlock, root, or simply have a working knowledge of your phone. Welcome! Most of the information in the guide above applies to OSX, however there are a few key changes.
Google hosts ADB/Fastboot (platform-tools) for Windows, OSX, and Linux. This is a minimal download, however these links and file sizes may be updated periodically by Google. Download the OSX platform-tools. Note that clicking the link for platform-tools will immediately start a download.
*OSX: platform-tools.
Once you have downloaded the platform-tools zip, extract the file then transfer the platform-tools folder to your desktop. The platform-tools folder contains adb, fastboot, and several other files.
To make sure your ADB is installed correctly, open a terminal command prompt and issue this cd command (change directory) to the platform-tools folder:
Code:
cd /users/username/desktop/platform-tools
then issue this command to check your adb version:
Code:
./adb version
If it returns a version number for Android Debug Bridge then you're good to go.
Using ADB/Fastboot commands
OSX natively requires "./" to prefix any ADB or Fastboot commands. If following the guide in post #1, commands issued in OSX must be written as follows ./adb [command] or ./fastboot [command]. Below are example scenarios.
To check if your device sees ADB, enable USB Debugging from within Android in Settings/Developer options. Go into Settings/About Phone, scroll down and click on build number continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and enable USB Debugging.
Code:
./adb devices
It should return your device serial number, if so, adb is working.
Reboot into the bootloader:
Code:
./adb reboot bootloader
Reboot into the recovery:
Code:
./adb reboot recovery
Fastboot commands must be performed while in the bootloader. Power off your phone then boot into the bootloader (power + volume down). Below are some example OSX fastboot commands that can be used throughout the guide:
Check if your device sees fastboot:
Code:
./fastboot devices
Install a factory image:
cd into the platform-tools folder with the following command:
Code:
cd /users/username/desktop/platform-tools
Now enter commands to flash a factory image:
Code:
./fastboot flash bootloader /users/username/desktop/bullhead/images/bootloader-bullhead-bullhead-xx.xx.img
./fastboot reboot-bootloader
./fastboot flash radio /users/username/desktop/bullhead/images/radio-bullhead-bullhead-xx.xx.img
./fastboot reboot-bootloader
./fastboot flash boot /users/username/desktop/bullhead/images/boot.img
./fastboot erase cache
./fastboot flash cache /users/username/desktop/bullhead/images/cache.img
./fastboot flash recovery /users/username/desktop/bullhead/images/recovery.img
./fastboot flash system /users/username/desktop/bullhead/images/system.img
./fastboot flash vendor /users/username/desktop/bullhead/images/vendor.img
@Heisenberg you mind if i create an index thread?
reyscott1968 said:
@Heisenberg you mind if i create an index thread?
Click to expand...
Click to collapse
Go right ahead, first in best dressed as far as I'm concerned. It is a fair bit of work to keep an index maintained though, as long as you're aware. There's a new template for indexes too, using your Google goggles you should be able to track it down pretty easily.
Heisenberg said:
Go right ahead, first in best dressed as far as I'm concerned. It is a fair bit of work to keep an index maintained though, as long as you're aware. There's a new template for indexes too, using your Google goggles you should be able to track it down pretty easily.
Click to expand...
Click to collapse
il take note.. il update the thread once im back on my pc.. now still at work ...
Deleted...
Should have read the first lines in the OP
Cant wait, should have mine around october 30th.
Might want to point out the cable /adapter required to connect to pc. (I just saw that it's not included with the phone.)
AquilaDroid said:
Might want to point out the cable /adapter required to connect to pc. (I just saw that it's not included with the phone.)
Click to expand...
Click to collapse
I picked up a few of these to get me by for now until the price of Type-C goes down a bit http://www.ebay.com/itm/381344035966
I ordered one along with my phone, will be helpful for flashing.
Thanks, a friend of mine pre order this phone, I'll follow these steps
Thanks for starting this, these were some of the most helpful threads in the N5 forum.
For Mac users who have upgraded to El Capitan, the adb/fastboot installation doesn't necessarily work perfectly right now. I'm sure the Android SDK package will update for this, but in the mean time:
Install adb/fastboot as usual similar to this thread, or for specifics:
http://forum.xda-developers.com/showthread.php?t=1917237
but, once you test this with [adb devices] or [fastboot devices] you'll most likely get a command not found error.
You'll need to add a line to your ~/.bash_profile, per this reddit thread
add the following line to your ~/.bash_profile, changing username to your mac username
Code:
export PATH="/usr/local/lib/node_modules:/usr/local/apache-maven-3.0.3/bin:/Users/[B]username[/B]/.composer/vendor/bin:/Users/[B]username[/B]/Library/Android/sdk/platform-tools:$PATH"
exit, save, then run
Code:
source ~/.bash_profile
then adb/fastboot should be good to go like before!
OP has best username ever
Sent from my Nexus 5 using Tapatalk
Doesn't work!
Code:
C:\Users\Kevin\Downloads\Nexus 5x>fastboot oem unlock
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.017s
C:\Users\Kevin\Downloads\Nexus 5x>fastboot flashing unlock
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.014s
C:\Users\Kevin\Downloads\Nexus 5x>fastboot flashing unlock_critical
...
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.011s
C:\Users\Kevin\Downloads\Nexus 5x>fastboot flashing get_unlock_ability
...
(bootloader) get_unlock_ability: 0
OKAY [ 0.020s]
finished. total time: 0.022s
The-Kevster said:
Doesn't work!
Click to expand...
Click to collapse
Did you allow OEM Unlock in developer options?
Go into Settings/About Phone, scroll down and click on “build number” continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the “Enable OEM Unlock” checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
Click to expand...
Click to collapse
Does the 5X have the hardware QFuse that that pops when you unlock the bootloader like the 6P?
KidWave said:
Does the 5X have the hardware QFuse that that pops when you unlock the bootloader like the 6P?
Click to expand...
Click to collapse
They both use Qualcomm based chips so yes the same thing would happen on the 5X.