Serious problem with xRecovery - XPERIA X8 General

i have the problem with this ****in xRecovery, when i wanna restore roms with it MD5mismatch error . and funny thing is that i back up rom and after that when i wanna restore that give me the same error. and sometimes in update custom zip i get BAD FILE error !!!!!!
i flashed 2.1.1 and 2.0.1 and still having this ... !!

Maybe you have damaged sd card.
I had some problem when i turned on phone it says sd card damaged and freeze but before freeze i got force close of programs on sd card,i solved my problem turning on phone without sd card and insert it later after reboot it is detecting sd card but APPS ARE NOT WORKING!!! the only apps that are working was in internal memory and need locate my app2sd folder and install every single app AGAIN!!! but data was saved.I think your problem is damaged sd card.
Sent from my E15i using XDA Premium App

maybe dumb question but did you not renamed the folder which created xrecovery? i mean that with date like 2011-03-27.17.20.26
.. when i renamed it, it writed md5missmatch

If you have renamed the folder, you should not use any spaces. The "mismatch problem" also appears when you change from different ROMs, when one uses NAND (without the laughing droid logo) and the other xRecovery (with the logo).

BehradGH said:
i have the problem with this ****in xRecovery, when i wanna restore roms with it MD5mismatch error . and funny thing is that i back up rom and after that when i wanna restore that give me the same error. and sometimes in update custom zip i get BAD FILE error !!!!!!
i flashed 2.1.1 and 2.0.1 and still having this ... !!
Click to expand...
Click to collapse
Save the files that you have and format your SD Card..

Related

bad sd card?

I tried to update to the 2.33 jachero rom got a bootloop
tried an older version got a bootloop
tried the dudes build got a bootloop
i then used and old sdcard from my sidekick and i got on the dudes build
i tried to use apps2sd on the stock 1gb card which i previously already had and it said i didnt have a partition on it which i did previously so it set it up and rebooted into a bootloop
is this a bad sd card?
any ideas?
Is it trying to move the /data to the sd? If it is, that would be the issue, Least it was for me when I went to 1.51
sorry havent been on here in awhile been on vacation
i tried upgrading to jacshero2.3 at the time and i just got a constant bootloop nothing would happen so i took an old sdcard from my sidekick lx and put back on the dudes build and it worked but i cant reboot the phone from the sd card i tried to install hero on it will bootloop.
also i lost appstosd nothing saves to the sd but if i open partion manager it says i still have ext2.
and if i use appstosd it says i have to partition my sd card and if i try it the phone reboots and bootloops
Yea sounds like you need to redo the sd card.. Id just save the apps and apps-private folder and wipe the rest. Then put the apps and apps-private back on after you wiped the card then relink them.
is it a simple copy and paste
it started up today wit the sd card so ill reformat it
Its not a simple copy and paste.. Usually if you use linux you need to make sure the attributes are saved as well. cp -a

[Q] Help i can't flash roms. Tried several ways

All this on a new vibrant using the stock 2.1
I've rooted the phone with one click. I've used oneclick as admin to run the 3s update.
I have update.zip loaded onto the root of my phone(not sd card)
I have clockwork recovery on my phone and i have done a backup
I have booted to recovery mode from Rom Manager then when i try to install zip from sd it takes me to a directory.
I select zip from sd card
I select sd/ and my nothing is showing there just keeps taking me back to the directory and telling me "no files found"
Sooo then i tried flash rom from sd in rom manager and it starts to flash then give a message "no sd-ext found. skipping backup of sd-ext" then it tells me to reboot.
What am i doing wrong I've been working on this since yesterday morning with no success.
sd-ext is the external sd card not the build in 16gb.
Put one microsd in with the rom you want to flash.
You need to put the rom you want to flash in the internal sd card, not the external sd.
djquick said:
You need to put the rom you want to flash in the internal sd card, not the external sd.
Click to expand...
Click to collapse
I had done that in the first place and then when i went to boot the screen was all distorted and i couldn't see what it said so i flashed the stock rom back.
I just tried again and it said to reboot so i did and now my toxic rom seems to be working just fine. Thanks for the input

[Q] SD card blocked after update CWM

Today, many hours ago, i wanted to install the
[ROM][22/1/12][U8800][MIUI][v2.1.20][MULTILINGUAL][2.6.35 Kernel]
I came from the
[ROM][15/01/2012][U8800][MIUI][v2.1.20][MULTILINGUAL][2.6.32 Kernel]
So first changed my CWM into version ClockworkMod [v5.5.0.4]
I first pasted the new rom on my U8800 (previous versions i also had the network problems so needed latest version) SD card, then did the new CWM install and after this i lost all sound and mic...
I tryed to install the new ROM but still the network problem...
So i did my back-up but again no sound/mic/vibrate working...
After this i wanted to put an older rom or maybe CWM back on my SD card but now the SD can't be written on...
What can i do now...
Someone plz help me... Now my phone doesn't have network or any sound, vibrate also isn't working...
Best regards VdBRoald
Try to update from internal sd?
Also, the newer MIUI requires you to install official 2.3.5 before you install it. The newer has different kernel .35 that is required for all functions to work. (Batterystat , network, wlan, etc.)
Sent from my u8800 using XDA App
thx for reply,
The inside memory is to small for installing a ROM and atm i only have the Build-in SD card, the one that is now write protected for a reason...
Because i came from another rom i think it isn't needed for first upgrading my standard version into 2.3.5...?
Best regards
Trust me, it is needed. .35 roms don't work unless you have first installed official 2.3.5.
Buy sdcard and try to install from there.
Try to mound/unmoung sd in cwm and try to install then.
Sent from my u8800 using XDA App
Try first to mount sd card on pc and check it for errors with windows check disk app. I don' t think that the card is damaged. Then you need to put dload folder from 2.3.5 official rom package(instructions are on package' s pdf file) and flash it from bootloader by pressing vol+,vol-,power when device is off.
The SD card isn't damaged , just is write protected now...
Tryed to mount/unmount in CWM but gives an error (because of problem mensioned i think...)
I can buy a new one but i hope it doesn't reaches that point... :x
Put the card in a card reader and mount it on pc. I don' t think that you have problems then.
It is a build-in SD card so i can't reach it... :'(
edit:Just wanted to dl the official 2.3.5 release from Huawei.
But all sites seems to have deleted the file...
Do you have 5.5.0.4 recovery? I had same problem with that.
Try to change your recovery to Genokolars 5.0.2.7 or the official 5.0.2.6 one.
Firstly, you should've updated your base ROM to B522, then flash MIUI. The problem for your case is that the new kernel does not work with the old base.
Here's what you should do:
Flash B522.
Flash CWM.
Flash MIUI.
How can i do this without an sd card that can be written ons?
I Will do this after i found the solution for the SD card problem, then i can copy new files on it...
PS: factory reset also doesn't work because off problems
You change the recovery in PINK SCREEN not in internal sd card.
Change the recovery, then youll be able to access sd, at least I did.
Sent from my u8800 using XDA App
RoaldVdB said:
How can i do this without an sd card that can be written ons?
I Will do this after i found the solution for the SD card problem, then i can copy new files on it...
PS: factory reset also doesn't work because off problems
Click to expand...
Click to collapse
Use another phone or, even a camera. Insert the micro SD to that, connect to USB, make folder dload on the card, copy the update.app into there and do the steps I wrote before.
All already thx for the comments, i just got a new sd card, for the low cost of 8euro i don't bother for more trouble handling with that. So now i'am trying to do everything with my new card.
It was a hard start because it wasn't working well in beginning, i put the files off the first step true pc (in SD holder) and is now installing the new firmware... let's hope that all the rest will go a bit easyer
Thx a lot to all the replyers and specially to Blefish!
Everything is working perfect now!
The only thing i now have to do is search for some nice ring and message tones
Finally i can call and be called again

[Q] Memory card issue after flashing 7.1.0

Hello members.
I just found a strange issue that I have started facing lately whenever I try to flash a custom ROM on my Defy.
Current stock ROM was 2.2.2
I rooted it and tried This ROM. After flashing it I realized my Proximity sensor stopped working after sometime and my memory card was out of space according to my cell though Astro and ES explorer could access it and I could play music too but my cell still said that Available memory was 0 ( It had 1GB free memory )
Then I changed the ROM to 2.3.7 posted by Quarx hoping it would solve my issue but I had same 2 issues again.
My stock ROM is working perfectly and is not showing any issues. Please tell me what do I do ?
I want to use custom ROMs real bad :3
nidhish91 said:
Hello members.
I just found a strange issue that I have started facing lately whenever I try to flash a custom ROM on my Defy.
Current stock ROM was 2.2.2
I rooted it and tried This ROM. After flashing it I realized my Proximity sensor stopped working after sometime and my memory card was out of space according to my cell though Astro and ES explorer could access it and I could play music too but my cell still said that Available memory was 0 ( It had 1GB free memory )
Then I changed the ROM to 2.3.7 posted by Quarx hoping it would solve my issue but I had same 2 issues again.
My stock ROM is working perfectly and is not showing any issues. Please tell me what do I do ?
I want to use custom ROMs real bad :3
Click to expand...
Click to collapse
1) after taking the nandroid backup of ur stock rom .. clear the cache from stock recovery..
2) then u come to custom recovery (via CWM) and wipe data/factory reset and than u install CM7 and flash Gapps .. then wipe cache & dalvik cache ...Reboot
i think u wont be having any problem after doing this..
Cheers
I have the sbf file of the Stock Rom so thats not an issue. I did try the steps you told me to follow but I had the same problems ! Dont know whats causing it.
nidhish91 said:
I have the sbf file of the Stock Rom so thats not an issue. I did try the steps you told me to follow but I had the same problems ! Dont know whats causing it.
Click to expand...
Click to collapse
plug defy into pc... enable SD file transfer... copy all SD contents to pc... get a new SD card... insert it into ph & copy contents from pc to new SD
King_Rat said:
plug defy into pc... enable SD file transfer... copy all SD contents to pc... get a new SD card... insert it into ph & copy contents from pc to new SD
Click to expand...
Click to collapse
Why do I buy a new SD ? Its a sandisk class 4 4GB card which is working. The problem is when I use it with ROMs

[q] defy + problems

I have many problems with my two month old defy plus..some problems are really strange and i cant really understand if its a problem with the phone or the sd card...
i am gonna explain all of them.
1. SD card problem..the sd card causes a lot of problem ..the most affected application is swiftkey..after days of working correctly..suddenly a message pops out unable to load language packs..and the keyboard becomes unusable.on unmounting and mounting the sd card..the problem sumtyms goes..sometimes not.
2.applications go missing on their own.
3. transferring files via bluetooth is very very hard...only zip files can be transferred..and sometimes when the transfer fails..the phone has to be rebooted to start transferring again..or sd card has to unmounted and remounted
4.on switching on the phone error messages comes such as " unparseable date"..
5n deleting any folder from the mem card via file explorer..the swiftkey keyboard failes showing messages like unable to load languagepacks or failed to store dyanamic language
6 droid sail frequently fails to move apps to sd card..although my phone is rooted..error messages such as no root no usb debugging is shown..although both of them are on
7:sms back up software not working..it shows write access denied..
8 titanium pro cant be installed.it shows that memory is not available although i have 1 gb of free internal memory
and my last question..will CM9 solve these problems??????
please reply
Please inform your ROM, it may help us identify your problem.
But seems to me that your SD Card is corrupted, try inserting it on a computer and formatting it (backup your stuff first).
thiagoelg said:
Please inform your ROM, it may help us identify your problem.
But seems to me that your SD Card is corrupted, try inserting it on a computer and formatting it (backup your stuff first).
Click to expand...
Click to collapse
i am using original ROM..no custom roms installed...and i am doing the formatting right now..will tell if the problem is gone
which version?the stock 2.3.6 is very buggy i suggest to install the 10.18 quarx cm10 build with latest custom kernel its very fast and stable for me
Tapajyoti said:
i am using original ROM..no custom roms installed...and i am doing the formatting right now..will tell if the problem is gone
Click to expand...
Click to collapse
You could check sdcard for errors in Windows (right click on sdcard drive letter & select check for errors) . Windows will correct it automatically. This way u won't loose any data on your sdcard. Don't forget to unplug it safely in windows afterwards, otherwise it may become corrupted again.
mihione said:
which version?the stock 2.3.6 is very buggy i suggest to install the 10.18 quarx cm10 build with latest custom kernel its very fast and stable for me
Click to expand...
Click to collapse
yes i am having a lot of problems with the stock firmware...i have a question from you..can u transfer apk files directly from your laptop to your mobile via bluetooth or do you have to zip it first???in my mobile only zip files can be send via bluetooth..nothing else is accepted.
Did you find a fix about sd card problem? I found this: http://forum.xda-developers.com/showthread.php?t=1596997 but i don't know if the fix works with GB kernels. I have a 2.3.4 stock rom, and i can't write on my sdcard, i can only read it.
Do you have a high class card?
are you using a 32 gb card if yes downgrade to a lower capacity,
or you can try a class 10 card if u r using a class 4 card
or u can use ur large capacity card latter on if u upgrade ur defy plus, say after ur warranty is complete
i am not suggesting trying a new rom because ur defy is just 2 months old and gingerbread is not outdated al the apps come for it
regards

Categories

Resources