Database Users

[Q] Trouble installing recovery via Odin

Hi all. Could use some help. Not sure which step I am missing. I followed the Philz Touch instructions below and flashed the MD5 recovery package with Odin. First with the "Auto Reboot" option ticked, then without. Odin says successful but I can't seem to get it to boot into recovery. Am I using the wrong three buttons? When I tried it just came up the battery charging logo.
Should I not have "F. Reset Time" ticked?
boot into download mode
start odin3 and configure it as in picture below
connect phone in download mode to PC via USB
press start to flash the tar.md5 package
normally, phone should auto-reboot into recovery.
If it reboots into main system and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing the 3 buttons combo to for a reboot into recovery.You should see the new CWM
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm

Anyone? Can someone simply verify the 3-button reboot sequence?
I have a newly rooted Sprint GS4 which I updated to MF9 before rooting. I used Odin 1.85 to root it. I am now looking to install a custom recovery and kernel and eventually experiment with some different ROMs. I decided to go with the PHILZ Touch CWM based recovery and flashed the correct tar.md5 file based on his instructions listed here... http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4. However, I am running into the issues that he addresses regarding the phone auto-rebooting back into the main system and not into the newly installed recovery. I did as he said and un-checked the "auto reboot" option and tried again a couple times. Once it seemed to get stuck on the downloading screen when i unplugged the device after successful install via Odin, then I tried the same leaving the phone plugged into the computer and it seemed to get stuck on the battery charging logo. I am deftly afraid of bricking this thing so I was hoping someone who's done this can explain exactly which step I am missing. Thanks very much and thanks for the noob thread.

jbb2388 said:
Anyone? Can someone simply verify the 3-button reboot sequence?
Click to expand...
Click to collapse
With the phone powered off, press and hold the power and volume up buttons, and when the phone vibrates, release the power button but not the volume button. You should get a screen saying booting recovery, followed by the recovery ROM.

angiest said:
With the phone powered off, press and hold the power and volume up buttons, and when the phone vibrates, release the power button but not the volume button. You should get a screen saying booting recovery, followed by the recovery ROM.
Click to expand...
Click to collapse
Geez, I thought I had tried that multiple times but it just worked finally!!! Thanks angie! Finally into the recovery and performing a nandroid backup as we speak.

"no command" after installing TWRP in recovery mode

hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.

No one knows?

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
What is the model number of your Note 4? When you are at the "no command" screen, try holding the volume up button and then press the power button to take you to recovery. I'd that doesn't work try holding the power button and tapping the volume up button quickly and release all buttons and see if it allows yoj to access recovery. I'd these do not work keep trying different button combinations. I'd you still cannot access the recovery menu you may have to Odin the factory firmware and start over. Let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app

none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.

I had this problem in the past, I think the problem was that when I was installing TWRP via Odin that I had not powered off the phone so it looked like it installed but actually didn't, try taking out the battery and then boot into recovery or download mode whatever it is that is used for Odin and install again

kratos0605 said:
none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.
Click to expand...
Click to collapse
If you cannot get into recovery with any button combination boot to download mode and use Odin to flash all 4 files of the factory firmware. That will give you a fresh start. Let me know how it goes.
Sent from my Nexus 6 using XDA-Developers mobile app

Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.

amk58 said:
Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into â??installing system updateâ?¦.â? and then â??No commandâ? shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
â?? Appling Multi-CSCâ?¦
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.
Click to expand...
Click to collapse
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.

fast69mopar said:
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.
Click to expand...
Click to collapse
but this will erase all my data from the phone

Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Click to expand...
Click to collapse
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Click to expand...
Click to collapse
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu

amk58 said:
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu
Click to expand...
Click to collapse
That looks like TWRP didn't stick when you flashed it using Odin. Try a different version of Odin and flash TWRP.
Sent from my Nexus 6 using XDA-Developers mobile app

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.

We need to try another time flash. Conditions - old Odin 3.06, configured to remove reboot.

swhockey347 said:
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.
Click to expand...
Click to collapse
thanks you saved me lot of time today !!!

Thanks - this helped me too

i have same problem
my phone is samsung j2lte
have you try untick /uncheck the "auto reboot" option on odin app. instead reboot manually after flashing twrp??
my problem not solved either

Thank you. This helped me too.

kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
In ODIN go to 'options' and uncheck 'auto-reboot', then flash TWRP. When it's done, it won't reboot, just pull the battery for several seconds, reinsert it and boot into TWRP Recovery.
Enjoy!

When I try to flash any thing it gets stuck on boot.img

[BPH6][24.08.16][SM-G935F/FD/W8] SuperMan-Rom V1.12 Aroma -> Flash FAIL

Hello,
http://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
This ROM looks great !!! I managed strictly following the steps below to install the rom on my S7 Edge once. Later I wanted to reflash the ROM to change things in AROMA. Since it is impossible for me to go beyond the boot Samsung screen (every time I wait more than 30 minutes, it seems blocked and the phone becomes hot). Since I tried doing all the steps again thinking to reflash the CP and BL, TWRP, and disable encryption of /data partition etc but I still have the same problem.
During the installation of the ROM, I tried several setups, with or without root, with differents kernels etc, nothing works, the installation goes smoothly. It's just that the phone remains locked at startup ("Samsung Galaxy S7 edge, POWERED BY android").
I have Odin 3.10.7 and 3.12.3, TWRP 3.0.2-3hero2lte, BL_G935FXXU1BPH6 and CP_G935FXXUBPH1 and no-verity-opt-encrypt-2.1.
I also tried flashing stock rom and then Superman and fail again.
Could someone help me ?
Thank you.
(I just didn't do the step with CSC because it's seems to be optional)
1. Start your phone, go to settings, about device, software info and hit build.number around 10 times so developer options will show up
2. Open developer options and tick: OEM unlock
3. Shut your phone off
4. You now need a computer, download odin3.10.11
5. Download two files, first is bootloader and second modem: bootloader and modem
6. Boot your phone into download mode by pressing: home+volume down+ power on
7. Open the downloaded odin on your windows pc and click on BL tab and add the file that name begins with BL, same for CP tab
8. After this, reboot to download mode again
9. Install TWRP (latest one is needed to support new BL's) will be next step, for this, follow all steps provided in this forum: TWRP Thread (booting into download mode: press home+volume down+power on, booting into download mode press: home+volume up+power on)
10. when you got TWRP working: We need to disable encryption, for this you should boot into recovery mode (as described above)
11. Flash this on your phone
12. After flashing this, hit wipe, full wipe (this will clean all internal memory and your data will be lost!!)
13. you can test if encryption is still enabled, if TWRP shows error about not mounting /data your phone is still encrpyted
14. Now you can download the rom onto your PC and then transfer it via usb to your phone
15. It is rom installing time install the rom!
16. After successfully installing the rom hit reboot and you are good to go!
17. If you want you can use my csc selection to get your desired csc, if you want that you can grab it here: CSC Selection V1.6

Please help!!!

I recently tried to root my device by using Odin to flash CWM onto the phone, and then from there i tried installing Super user in recovery mode, but after restarting my phone, it popped up with "Verification Failed, Unable to restart your device. The integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data." And it has a reset button below. I regretfully didn't backup my device and I don't want to lose all my data. Please help :crying:
P.S. I am using an Samsung Galaxy A5 2017 and it is on latest firmware (7.0. Nougat)

I don't know if it is too late. Just go to sammobile and download firmware for your phone. Download it to your phone using odin. press and wait volume down and power button till you see black screen. After that immediately press and wait vol down+home+power button until you see download windows were you select volume up to select odin flash mode. you should be quick while doing this otherwise you can't get to download mode. when your screen goes black you should release keys and immediately press above combination. After that just flash your rom without messing up with odin. In odin go to AP select browse and select your rom connect your phone while it is in download mode. you should see "Added" in odin window with usb indicator. press start and wait till it finishes. this will upgrade your phone. in your case refresh system and you should supposed to boot to system without loosing any files and apps.
You will not loose any files because it is stored in userdata partition and flashing stock rom doesnt delete it. make sure you don't change options in odin leave them in default.
Please note that this will work only in your case or similar to your case were you didn't flashed custom firmware yet. For others it may not work.
I'm not responsible for any loss and you are doing it in your own risk. I've tried this more than 10 times cause i like messing with my phones. In all off them i was successful even in times i was in custom rom.
Go ahead and good luck.

Samsung J7 Pro Soft Brick after Oreo 8.1 update (no root)

Hi everyone...
Two days ago, and a few hours after installing the 8.1 update, my mom's J7 touchscreen was unresponsive, including the power button. It ran out of battery, and after I restarted it this morning, it goes to recovery mode after it tries installing system update and the No command screen is displayed.
I've searched on the web for hours and hours for solutions but none of them have worked, most probably because it requires the phone to be connected to the PC, and my PC (Windows 10) isn't even seeing the phone via USB (can't use ODIN nor ADB). BTW, the debug option most probably wasn't turned on prior to soft brick.
Phone Info:
SM-J730G J730GDXS5BRK1
No root
Error on recovery screen (the SD card has been taken out):
======================================
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
E:unknown volume for path [/odm]
E:unknown volume for path [/vendor]
# MANUAL MODE v1.0.0#
Successfully verified dmverity hash tree
=======================================
Additional info: As I've mentioned, the power button isn't responsive, so I press the volume down button to choose the recovery options. I've tried all recovery options except for:
Wipe data / factory reset, as the phone data isn't backed up (mom doesn't want to lose the personal data as much as possible)
Apply update from ADB
Apply update from SD card
All other options are looping back to the recovery screen after installing system update screen.
Lastly, in recovery, there's an option at the bottom that states "Lacking storage booting". I'm sure that would mean something to someone reading this that would help solve the issue.
An OS downgrade or same 8.1 fix is preferred, as long as the phone data is intact. Any and all help would be much appreciated.

Try "Emergency Software Recovery" feature in Samsung Smart Switch for PC.
It could be a hardware issue as well. Clean your USB charging port with a brush and a drop of alcohol. Then dry with a hair drier.

Good evening, have you tried installing the latest version of the firmware by odin?
If not, try this.
probably its touch stopped working after the update because it was not original (already it has been changed) or it can be other cases ..
if you still can not install the newest firmware downloaded from the sammobile site you can do the second procedure.
Such you will find in this same forum.
In it you use the pc miracle box application and downgrade to 7.1.
this is the title of the post.
follow all procedures.
and it will be all right.
Fix Touch does not work on Samsung J7 Pro (J730G, J730GM) when updating Android 8.1
https://forum.xda-developers.com/ga...ix-touch-samsung-j7-pro-j730g-j730gm-t3850177
PS: Putting it into download mode: Turn the device on by holding the volume down buttons + Home + Power

Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.

Marius.Banderas said:
Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.
Click to expand...
Click to collapse
Then when you get to step II open the twrp and go into settings and uncheck the prompt option to install supersu if it is checked. whenever you do something in twrp uncheck this option. I do not know if this will be your problem but this always happens to me, if not clear at the time of restart the cell phone is in the loop screen exactly because of this option.

Cloud1245 said:
Then when you get to step II open the twrp and go into settings and uncheck the prompt option to install supersu if it is checked. whenever you do something in twrp uncheck this option. I do not know if this will be your problem but this always happens to me, if not clear at the time of restart the cell phone is in the loop screen exactly because of this option.
Click to expand...
Click to collapse
Checked TWRP Settings and there's no option / tickbox for supersu. I think one thing that I'm doing wrong is that I'm formatting data in TWRP during the wipe process instead of just sliding it to restore factory settings. I will try again later today after work.
Also, one thing I've noticed after flashing TWRP is that I have to enter recovery mode twice - the first time, it goes to the No command error screen then goes to stock recovery. Only after a reboot in the stock recovery would the phone enter TWRP recovery.

Marius.Banderas said:
Checked TWRP Settings and there's no option / tickbox for supersu. I think one thing that I'm doing wrong is that I'm formatting data in TWRP during the wipe process instead of just sliding it to restore factory settings. I will try again later today after work.
Also, one thing I've noticed after flashing TWRP is that I have to enter recovery mode twice - the first time, it goes to the No command error screen then goes to stock recovery. Only after a reboot in the stock recovery would the phone enter TWRP recovery.
Click to expand...
Click to collapse
Just one more thing. In tutorials on how to install twrp. when you enter twrp the first thing you should do is format the data. then install the rmm state prenormal and bypass files and only then install magisk or a custom rom.
---------- Post added at 11:10 PM ---------- Previous post was at 11:05 PM ----------
Cloud1245 said:
Just one more thing. In tutorials on how to install twrp. when you enter twrp the first thing you should do is format the data. then install the rmm state prenormal and bypass files and only then install magisk or a custom rom.
Click to expand...
Click to collapse
https://youtu.be/UOACi_sUDQY
do only steps 1, 4, 5, 6, 7, and 8 of the video description.
Will be all right!

Marius.Banderas said:
Thank you. I've tried 3 times now as I am getting stuck at II. Flash TWRP and fix rom. After I flash the nougat rom via TWRP, phone reboots and the logos keep on looping. Either I am doing something wrong or I'm missing a step, or the zip is not working for my mom's phone.
Click to expand...
Click to collapse
Before trying to flash TWRP, first flash a full stock firmware and make sure your can at least boot all the way up to the main screen.
Once that works, only then try to flash any custom recovery or custom rom.

Same prob
I've just faced the same problem a few days after my update as well. Did you figure out how to get it back to normal? Thank you!

uz91 said:
I've just faced the same problem a few days after my update as well. Did you figure out how to get it back to normal? Thank you!
Click to expand...
Click to collapse
that is a drk error
you can modification the stock firmware with 7z program
1. open your stock firmware go to AP file
2. click rename than erase the (.md5)
3. extarct the file
4. find (system) file
5. make a (.tar) file with (7z) program with the that system file
6. flash
7. done