Database Users

Problem flashing back to Clockwork Recovery

I think something in my recovery is corrupted as I cant get back to ClockworkMod recovery after switching to RA in ROM Manager. I normally use Clockwork for my backup and restores. But before switching to the new rom, I flashed into RA to make sure I did a good wipe before installing the new rom (like I always do). However, it took unusually long to flash RA in ROM Manager but it successfully finished. I was able to reboot into recovery, do my wipes, and and flash the new rom. Now after getting the phone set up with the new rom, I cant get back to Clockwork in ROM Manager. Im getting an error after selecting HTC Evo CMDA phone, "an error occurred while flashing your recovery" and Im stuck with RA recovery. Im guessing I need to reinstall recovery? Whats the easiest way to do this?
ROM Manager 2.5.0.7
Warm RLS4

Clear download cache in rom manager and try again.
Sent from the void...

didnt work. it sat there for a minute and then gave the same error. any other ideas?

Fixed. After about an hour of seaching, I found a thread suggesting to try to connect to WIFI and flash Clockwork again. That worked. It granted SU permissions, and flashed Clockwork.
For the hell of it, I tried to break it again.
Turned off WIFI, tried to flash RA, and it was very slow again. Took about 2 minutes to flash RA but it completed. Tried to flash Clockwork, and it went through ok now without being on WIFI.
I did it a few more times and seem to get inconsistent results. When it doesnt work right, it seems to be taking very long to get SU permissions granted for both recoveries. What is causing that?

[Q] myTouch 4G Recovery Issues! Please Help!

I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!

highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.

Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.

Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!

I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/

fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.

Stuck on MyTouch4G logo screen and can't restore nandroid - please help!

So I followed the guide to root with s=off and it seemed to work fine and I installed clockworkmod v3.0.0.5 through ROM Manager and had made 2 nandroid backups and everything seemed to be working great.
Then I tried to install CM7 RC1 through ROM Manager, thinking if anything went wrong I'd be able to restore the nandroid backups.
Something went wrong and I ended up stuck with the CM7 skateboarder animation infinitely repeating. So after pulling the battery I was able to boot into recovery. It looked like the stock recovery, but after selecting factory reset it went into Clockworkmod. From there I restored my backup, and everything seemed to work fine.
But when I reboot it just gets stuck forever at the MyTouch4G logo (the first one that comes up immediately on power up, not the second, round logo.
I've tried to restore both backups but always get stuck at the same screen.
Right now I need to get the phone working as fast as possible, hopefully to one of my backups (but if I can get it working I've also got MyBackup Pro and Titanium backups of my data and apps).
Can someone tell me what's the best way to get this working again and hopefully if it's possible to successfully restore my nandroid backup?
Thanks!!

Current:
Rom Manger (v3.0.1.0)
Recovery (v3.0.0.5)
When you go in Recovery from bootloader what color is the text green (2.x) or orange (3.x)? Keep in mind if your using 3.0.0.5 which has Recovery 2.5.1.2 then you can't flash CM7 as you need to use 2.5.1.4(Recovery) or 3.0.0.5(Recovery).
If you meet the basic requirement as you still have the rom on your SDCard. I want you to go in Recovery via bootloader. Then go in format and wipe /system, /data. Then go back in advance wipe dalvik and from main screen wipe cache, then do full factory wipe it will remount all. Once this is done select Install zip files> Choose zip files> Find and run the rom> select yes.
When you load for the first time give it some time as it will take few min but if it takes more than 5min than ya its in bootloop. If you get to the part here then it should be working but if you get stuck in mytouch 4g logo then it won't load. Now if you have green(2.x) text then what you need to do is install the Recovery 3.0.0.6.zip though Recovery as you won't be able to access Rom Manager and then try to flash CM7RC1. Let me know if you have any problem or its hard to understand. I know people always get Rom Manager and Recovery version number confused and the whole problem get started.

It says "ClockworkMod Recovery v3.0.0.5" at the top and bottom and has orange text on a black background (highlight line is white text on orange background).
This morning I managed to get it to boot by flashing PD15IMG.zip from HBOOT (took me a while to figure out I have to keep holding both down and power to get to HBOOT, just holding down and releasing power took me to ClockworkMod which wouldn't install the file).
Then I set up my account and downloaded MyBackup Pro which I used to restore visionary+ and rom manager to re-root and re-install clockworkmod then I rebooted into recovery and tried to restore my nandroid backup.
Same problem, stuck in the boot logo. So seems like these nandroid backups are useless.
Is there any way I can recover the backups? At this point I don't have much time to play with CM7 so I'd rather just get my phone back to where it was and play with CM7 a bit later when I have more time. If necessary I'll just go back to PD15IMG and manually restore using MyBackup Pro, but that backup isn't quite as fresh and it's a pain to restore the widgets, etc.
I'll try doing the wipes you suggested and see if that will bring back my backup...
Thanks!

To be clear:
ClockworkMod Recovery 3.0.0.5 -- the orange text version -- CANNOT be used with Stock ROMs, or any other Froyo-based ROM. Not backup, not restore, and not install. It is only for Gingerbread-based ROMs, like CM7.
Froyo and Gingerbread versions of Android use different filesystem structures. CWMR 3.0.0.5 is for EXT4 filesystems, which the Froyo kernel cannot mount.
At boot up, the Froyo kernel tries to mount /system, and fails, because /system is in EXT4 format that it doesn't understand. So the Froyo kernel crashes, reboots .... and fails again. And again.

That explains it. Thanks.

So I installed ClockWorkMod 3.0.0.6 and used that to restore my last nandroid backup (even though it was made in 3.0.0.5) and that seems to have worked!
CM7 does look quite nice. I look forward to playing with it when I have more time.
Thanks for your help!

Problems with Nandroid backups and Fresh ROM 3.5.0.1

I'm having some issues with Fresh ROM 3.5.0.1 and doing Nandroid backups. Simply put, they NEVER WORK.
I have RA recovery and no matter what I do, no matter how many times I backup (Nandroid), no matter what version of RA Recovery I use, nothing works.
Basically what happens is that I do the Nandroid restore and then my phone just boot loops until I pull the battery. The only fix I've found is to wipe the phone and re-install completely fresh, all new. I've tried downloading Fresh ROM a few times too.
I've done this at least a dozen times, Nandroid backups NEVER work.
What exactly am I missing here?
On a side note, if I go to an older version of Fresh Rom, Nandroid backups work.

what version RA?
do clockwork backups work?

I don't like Clockworks, I've always used RA's Recovery.
That said, any version of RA. 1.80, 2.1, 2.2, the new 2.3, all of them. I thought the issue was something to do with 2.2 or 2.3 so I downgraded back to 1.80 and I still have this issue.
Finally I figured out that Fresh Rom 3.5.0.1 was the common factor so I re-downloaded that and checked the hash, it's right so its not corrupted, reflashed, made a Nandroid, restored and poof I'm still boot looping.
The reason this is an issue is that Fresh is my daily Rom and I like to try other roms out then Nandroid back to Fresh but since 3.5.0.1, I can't.
On a side note, completely unrelated, CM7 Nightly with the google apps installed boot loops for me too right out of the box so to speak. Soon as I install the Google Apps zip, it boot loops too! Man, I'm having no luck over here!

have you tried a different sd card?

I'm not personally good enough at this to help you, but perhaps state your hardware version and your root method and see if this might lead to some answers? For the record, I have hardware 0003, I used unrevoked, and I was running the same version of Fresh that you were.
Also, I *think* I did my first Nandroid, but I've only ever backed up/restored from Clockwork. I use Clockwork now because it ties in with Rom Manager. I can confirm that clockwork + fresh 3.5.0.1 had a successful nandroid backup and restore on my phone. Maybe try installing Clockwork recovery, make a nandroid, see if it works, and narrow down your problem to maybe just RA not working with your setup somehow? Granted it'd be nice if you could use the recovery that you want to, but at least you'd have some semblance of a backup procedure.
[also]..... I *think* that RA makes a recovery folder called "nandroid" on the SD card, whereas Clockwork makes one called "clockwork/backups".... I remember this confusing me for a second, and I'm not sure if that information can help you in any way. Good luck man!

Not the only victim, happens to me too that's why I don't use nandroid on amon ra recovery, I like using clockworks back up
Sent from my PC36100 using XDA App

[Q] Evo stuck at load screen.

So, I'm a bit new around here and to rooting and flashing roms. I recently have been flashing rooms directly from rom manager. Everything was fine for weeks until I recentely tried flashing a rom by RVU. Now I'm stuck in the stock evo 4 g load screen and it keeps loading over and over. Any suggestions ? Is there away back into the boot loader ?

Turrubiates said:
So, I'm a bit new around here and to rooting and flashing roms. I recently have been flashing rooms directly from rom manager. Everything was fine for weeks until I recentely tried flashing a rom by RVU. Now I'm stuck in the stock evo 4 g load screen and it keeps loading over and over. Any suggestions ? Is there away back into the boot loader ?
Click to expand...
Click to collapse
To get back to the bootloader, you'd need to pull the battery (won't hurt anything) and put it back in. Then hold the power button and volume down. That will get you to the bootloader
What do you mean you tried flashing a rom by RVU? I'm confused. RUU is rom utility update, or rom update utility, or something ike that. But if you ran an RUU it would put you back to completely stock.
If I were you, and in your situation, I'd pull the battery, boot to bootloader, and see if you can still get to your recovery. If you can, I'd try wiping everything then either restoring a nandroid backup if you have one, or a fresh install of a ROM. If you don't have recovery, post back and we'll see what needs to happen to get you back up again.

Well, the rom I flashed was created by team RVU....at least that's what it said. So, I made it as far as recovery. But by wipe you mean a wipe back to stock? I'm in as far as my clockwork mod recovery screen. Kinda lost now !!

Turrubiates said:
Well, the rom I flashed was created by team RVU....at least that's what it said. So, I made it as far as recovery. But by wipe you mean a wipe back to stock? I'm in as far as my clockwork mod recovery screen. Kinda lost now !!
Click to expand...
Click to collapse
Okay I gotchya now, although I don't think I've been informed of RVU before, I'll have to check it out. Anyways, thats good that you can still get to recovery. So you have never used it before? Just did everything from ROM manager before huh? I'm not familiar with clockwork recovery, as I use Amon, I'm trying to remember the little differences. First, you don't have any nandroid backups do you? Prob not if you're not familiar with clockwork and had never created a nandroid backup before! I'm not sure if backups made with ROM manager can be restored using CWM, doubtful though. So by wipe, I mean wipe data/factory reset, wipe cache, and wipe davlik cache. You will need to have a ROM on your sd card, so that you can install it from recovery. In order to wipe the dalvik cache using clockwork, i believe it is under the advanced section. Not sure though. Once you have everything wiped, and the ROM of your choice on the main directory of your sd card, choose 'flash zip from sd card' or 'install zip from sd card" or something to that nature, then find the ROM and flash it. If all goes well, you should be able to boot up after that. If you do indeed happen to have a nandroid backup, choose to restore that.

Yup, everything I've done has been through rom manager. Anywho, I peeked around inside some files. Inside my install zip from sd. I found a file labeled nandroid. Could that be the backup that your referring too ? If so, would i still have to wipe my phone ?

Turrubiates said:
Yup, everything I've done has been through rom manager. Anywho, I peeked around inside some files. Inside my install zip from sd. I found a file labeled nandroid. Could that be the backup that your referring too ? If so, would i still have to wipe my phone ?
Click to expand...
Click to collapse
Nandroid folder is for amon RA backups. Clockwork backups are in the clockwork/backup folder.
Have you backed up your previous install? If so wipe all factory reset then restore a backup. Otherwise wipe all and flash a new rom.
This is why you do research and learn how to properly use your phone and any custom recovery before you reach this step. This is why manufacturers have crappy warranty policies because people ruin their phones by being stupid.
Sent from my PC36100 using XDA App

Rem3Dy said:
Nandroid folder is for amon RA backups. Clockwork backups are in the clockwork/backup folder.
Have you backed up your previous install? If so wipe all factory reset then restore a backup. Otherwise wipe all and flash a new rom.
This is why you do research and learn how to properly use your phone and any custom recovery before you reach this step. This is why manufacturers have crappy warranty policies because people ruin their phones by being stupid.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thank for lending a hand. Instead of trial and error, I simply started a thread. Oh, and thanks for reminding me I'm stupid!!!