Related
Having recently bought my son a Nintendo DS, I noted that in the accessory pack I got with it, it came with 2 screen protectors that are semi-rigid. They're quite a bit thicker than one that shipped with my phone, and don't flex and bend like thin paper. They also don't seem to affect sensitivity of the touch screen in any way, as well as being perfectly sized to the screens and were invisible once fitted.
Are there similar protectors for the TyTn 2? I'd love such a protector as it'd be FAR easier to fit, and provide much better protection to the screen.
Rigid Screen Protectors
I have come across these. The ones I tried were made by "Martin Fields" product number MFOP-HTCTyTN-T
A right bloody bastard to fit as they are very slighty oversized. Perhaps this is done purposly so the protector fits into the gap around the edges of the screen?
Very clear and reasonably priced compared to the OEM product. They do work extremely well (once fitted).
Rgs,
J
Thanks. I'll check em out.
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
I just checked my little brother's DS box, hoping to find the screen protector but nothing there but manuals =(
Any reference on how firm and rigid the MField or InvS are?
Well, from the video, the invisibleShield isn't the slightest bit rigid, though if it lives up to its claims, that wouldn't matter. I ordered a Martin Fields one earlier so I'll see how good that is.
It's not just the rigidity for protection though. A rigid protector will be a LOT easier to fit...
Beleave me, MF is rigid. And yes, it is easy to install but remember to clean the surface of the screen. This part is very important. If you do it right, it will install in less than 30 seconds and you will struggle to see the difference between no protector and MF.
Oh I know that. I'll be cleaning it very carefully and making sure there's no dust about when I fit it! Don't want dust under the thing!
Just wish it'd hurry up and arrive!
boxwave
The boxwave protectors are much thicker than average ones, are washable, and work great. They are about as thick as the psp protectors, e.g. more like a hard plastic sheet, I'm not sure what the ds ones are like.
http://www.boxwave.com/products/cle...crystal-screen-protector-htc-tytn-ii_2905.htm
tke371 said:
invisibleSHIELD.. That's all I have to say.
oH, view the demo also.. its well worth it.
Click to expand...
Click to collapse
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Semi- related: how are you guys cleaning your phone screens?
Oh, and +1 for Martin Fields.
My phone broke, but I had insurance on it (not from phone company but through homeowner's via a personal property rider), and mycellularrepair.com was able to replace the LCD for $200. Also, never buy that phone company insurance. Personal property rider is the way to go. It was just pennies a year for ~$500 of coverage for the phone. NO DEDUCTIBLE! So I paid nothing to have my phone fixed.
Get a NEW ONE - They're Cheap
jon_k said:
FYI, a warning this could break your Tilt!!!!
This shield rocks. However it's a risk for the Tilt. You have to apply water to the back of the protector to get the bubbles out. I applied water, shook the excess water off before applying.... and stuck it on.
I used the included squeegee to get the excess water out of the shield along with the bubles. I wiped extra water away. Next day, my screen was dead (colors were washed out and glitches). Apparently during the squeegee process water slipped between the screen surface and the edge of the bezel around the screen, and in to the phone, and got under the LCD plastic into the LCD itself.
I do use this product on my $2700 SLR camera. There's no bezel on the LCD so the squeegee'd water comes right off, and won't get in the camera.
Beware. I had to get a new Tilt because of this, and it'll be a cold day in hell I use this product on any item with a bezel where water can seep in.
Click to expand...
Click to collapse
Interesting - Are you really that concerned about a product which is relatively cheap compared to the amount of time use you get out of it? Forget washing it off. Just put another one on - a CLEAN NEW one. If they last a long time (like in most cases a year or more), who cares that you have to spend around $20 to get a replacement. If they stopped making them altogether or they cost a ridiculous amount of money (for plastic, ridiculous. For peace of mind, priceless), then yeah, I would wash and rewash the screen to save money.
And the idea is NOT to squeegee the WATER bubbles out to the sides. They will evaporate on their own given some time. The idea IS to squeegee the AIR bubbles out to the sides and also to take extra great care when doing this procedure. You wash it off so that it restores some of the tackiness on the film. You can get most of the water off by blowing or using a can of compressed air, THEN put it on. You shouldn't have that much water under your film if you take care when doing it.
I am sorry about your tilt. That really sucks. If I were you, I would just put a BRAND NEW one on next time and forget about washing it off.
~Gwen
I need one of these too, recently the digitizer for the touch screen on my phone cracked. They are charging me 50$ for the screen and 40$ for labor. My question would be, would this rigid screen have prevented my digitizer from breaking? If it would then id buy it in a second.
I'm giving a +1 to the Martin Fields as well.
I just got a couple of them for my phone. They're definitely more rigid than some of the others, but I put it on a clean screen & can barely tell I have one on.
Stylus slides smoothly across it, no visible scratching at all (unlike the OEM one that marked easily), & it's also pretty smooth for finger usage too.
Had to wait a week for them to ship via expansys-usa, but worth the wait.
I had a Tilt and a screen protector that was just a plastic. It's reusable because I would just tuck the plastics into the edge of the screen.
Now, I got a Brando Screen Protector at home, which states reusable.
How are these washable/reusable screen protectors work with our phones? Is it pretty secure to wash and put it back on? I did it a lot with my tilt but I have no idea about the screen protectors regarding the Fuze.
currently I have a crappy one I bought from BestBuy and it is all scratched up, so thinking about switching to my Brando one.
Thanks in advance!
Rytt
With most screen protectors you can wash them in light soapy water (maybe dip it in a cup with light soapy water). Shake the screen protector to shake off excess water, then use a blow drywer to dry off the rest of the water. You might have to do this a few times. You might catch some more dirt. (!)
Sometimes this works...sometimes it doesn't and you're just screwed and ending up having to buy another.
I've been using Martin Fields and haven't have a problem with washing them. You just need to be in an area that is dust free and clean.
bfspider said:
With most screen protectors you can wash them in light soapy water (maybe dip it in a cup with light soapy water). Shake the screen protector to shake off excess water, then use a blow drywer to dry off the rest of the water. You might have to do this a few times. You might catch some more dirt. (!)
Sometimes this works...sometimes it doesn't and you're just screwed and ending up having to buy another.
I've been using Martin Fields and haven't have a problem with washing them. You just need to be in an area that is dust free and clean.
Click to expand...
Click to collapse
How does it stay on your screen then if you wash it in water?
Doesn't the sticky part of the SP stop sticking?
No, actually it works really well just rinsing it under warm water (I didn't use any soap). I'd say 100% that it's definitely re-usable.
I was wiping fingerprints off mine on a wool blanket and a corner came up, half the screen protector came off, and the underside rubbed against the blanket, picking up a ton of dirt and fibers.
I took it off and rinsed it off pretty forcefully, and even used my fingernail to scrape the dirt and fibers off. When I was done it felt like the adhesive was mostly gone while damp but as it dried it was sticky again. I flicked off most of the water and put it on the freshly windexed phone (spray the towel once, not the phone!). There were still some tiny water droplets on the protector when I put it on but I gently squeezed them to the edge as I put it back on and they all squeezed out.
The protector still has a slightly mottled appearance which I figured was from scraping all the adhesive off in some areas but it turns out it's tiny amounts of moisture under the protector. Over the next 24 hours the mottled appearance dried and faded and the protector was like new again, 100% crystal clear. It even still great adhesive abilities even though I was literally scrapping at it under the warm water.
At the mall I notice the people that do the invisi-shield covers do it the basically the same way but use a hair drier to get rid of the mottled appearance quicker.
Bottom line. I scrubbed the protector pretty good because I thought it was a lost cause and afterward is was as good as new (better since it's on straight now with no edges to catch), so don't be too afraid to wash an re-use it if the underside gets dirty. Plus I make it sound like there is a risk of getting your phone wet but only if you drop it in the sink. The amount of water on the protector after flicking it few times is no more than if you get a few snowflakes on it and wipe them off with your hand.
Kerensky97 said:
No, actually it works really well just rinsing it under warm water (I didn't use any soap). I'd say 100% that it's definitely re-usable.
I was wiping fingerprints off mine on a wool blanket and a corner came up, half the screen protector came off, and the underside rubbed against the blanket, picking up a ton of dirt and fibers.
I took it off and rinsed it off pretty forcefully, and even used my fingernail to scrape the dirt and fibers off. When I was done it felt like the adhesive was mostly gone while damp but as it dried it was sticky again. I flicked off most of the water and put it on the freshly windexed phone (spray the towel once, not the phone!). There were still some tiny water droplets on the protector when I put it on but I gently squeezed them to the edge as I put it back on and they all squeezed out.
The protector still has a slightly mottled appearance which I figured was from scraping all the adhesive off in some areas but it turns out it's tiny amounts of moisture under the protector. Over the next 24 hours the mottled appearance dried and faded and the protector was like new again, 100% crystal clear. It even still great adhesive abilities even though I was literally scrapping at it under the warm water.
At the mall I notice the people that do the invisi-shield covers do it the basically the same way but use a hair drier to get rid of the mottled appearance quicker.
Bottom line. I scrubbed the protector pretty good because I thought it was a lost cause and afterward is was as good as new (better since it's on straight now with no edges to catch), so don't be too afraid to wash an re-use it if the underside gets dirty. Plus I make it sound like there is a risk of getting your phone wet but only if you drop it in the sink. The amount of water on the protector after flicking it few times is no more than if you get a few snowflakes on it and wipe them off with your hand.
Click to expand...
Click to collapse
Thanks! I will put on my Brando shortly! Hope it works as wells as you said!
At approximately 1:30 PM today, my phone teamed up with the force of gravity to conspire against me. The unfortunate chain of events began when I decided to employ the services of a spare sock as a surrogate phone case, as I have yet to acquire my free case from Clove. Turns out the phone is as slippery as a snake in oil when cradled by nothing more than the downy comfort of a quality walking sock. The inherent danger is further exacerbated when exiting a car in a cheerful and care free manor. This is all it took for my 26 and half hours of fun filled ownership to come to an end. Its not all bad news though, as the thing luckily landed face down and received nothing more than superficial chipping. I see it as character building, and I think its learnt its lesson.
I'm now considering other case options.
SteveYorks said:
At approximately 1:30 PM today, my phone teamed up with the force of gravity to conspire against me. The unfortunate chain of events began when I decided to employ the services of a spare sock as a surrogate phone case, as I have yet to acquire my free case from Clove. Turns out the phone is as slippery as a snake in oil when cradled by nothing more than the downy comfort of a quality walking sock. The inherent danger is further exacerbated when exiting a car in a cheerful and care free manor. This is all it took for my 26 and half hours of fun filled ownership to come to an end. Its not all bad news though, as the thing luckily landed face down and received nothing more than superficial chipping. I see it as character building, and I think its learnt its lesson.
I'm now considering other case options.
Click to expand...
Click to collapse
Good thing the glass held up! :good::laugh:
I assume the phone is only slippery to the sock, not so much to the skin?
I had a screen protector on and that took a few scuffs, I've removed it now. It does seem a little slippery with the glass back but it's a good size to grip in the hand anyway, and I'd still use a case unless your very careful. Yes the phone and the sock is like the rat and the goose, never mix the two.
Hmm, I've just seen a report of someone who had his Z3C screen crack from a couch-height drop onto laminate parquet. http://www.androidauthority.com/community/threads/sony-xperia-z3-drop-test.9638/#post-31182
I've also seen a report of the screen cracking by itself in the front pocket, after sitting down. So far this is the second (published) self-cracking report. http://gathering.tweakers.net/forum/find/poster/623785/messages
In both of these cases, the upper half of the touch screen is apparently not responsive anymore.
I've dropped all my Sony phones a ridiculous amount of times, my wifes z1c hits the ground on a daily basis due to our kids. We've never had a screen crack. I don't think the z3c, which has very similar dimensions, will be any more prone to cracking unless the glass manufacturer delivered faulty parts.
Sent from my C5502 using Tapatalk
Bialynia said:
I've dropped all my Sony phones a ridiculous amount of times, my wifes z1c hits the ground on a daily basis due to our kids. We've never had a screen crack. I don't think the z3c, which has very similar dimensions, will be any more prone to cracking unless the glass manufacturer delivered faulty parts.
Sent from my C5502 using Tapatalk
Click to expand...
Click to collapse
I'm interested, does the glass on the Z1C lay slightly deeper than the frame, level with the frame, or does it stick out from the frame? On the z3c the glass is said to stick out from the frame very slightly, but that would indeed make the glass a lot more prone to cracking as opposed to glass that sits slightly deeper than the frame.
degraaff said:
I'm interested, does the glass on the Z1C lay slightly deeper than the frame, level with the frame, or does it stick out from the frame? On the z3c the glass is said to stick out from the frame very slightly, but that would indeed make the glass a lot more prone to cracking as opposed to glass that sits slightly deeper than the frame.
Click to expand...
Click to collapse
Hopefully my z3c comes tomorrow, I will let you know then.
Sent from my C5502 using Tapatalk
Bialynia said:
Hopefully my z3c comes tomorrow, I will let you know then.
Sent from my C5502 using Tapatalk
Click to expand...
Click to collapse
Alright. But can you tell me about the glass on the Z1 Compact? Is it sunken in, flush, or protruding?
Bialynia said:
I've dropped all my Sony phones a ridiculous amount of times, my wifes z1c hits the ground on a daily basis due to our kids. We've never had a screen crack. I don't think the z3c, which has very similar dimensions, will be any more prone to cracking unless the glass manufacturer delivered faulty parts.
Click to expand...
Click to collapse
Keep in mind that the Z1C has a plastic back while the Z3C has glass on both sides, so the latter will have a much higher chance of the point of impact being glass.
On my Z3 compact the glass isn't flush with the all of the frame. On the front side the screen is slightly sunken compared with the left and right side of the frame. The rest (front and back) is flush.
Mine is arrived yesterday morning, having to work all day so I just opened it around 11pm...after 10 mins, I was cooking, left it on the microwave and it managed to slip down on the counter and then on the hard floor of the kitchen face down.... I felt like had to kill myself, but not a single scratch, I've been very lucky
When mine made it's leap for freedom from it's cozy sock tent it landed face down on onto stone chips on the driveway. It probably took the brunt of the force on about 5 or 6 points of contact, chipping the metal frame and it also looked like the the screen was chipped in about 4 places. On removing the screen protector the glass was still perfect. I'm convinced that if the protector hadn't been on there the glass would have chipped.
The free protector though does dull the screen somewhat, so I'd recommend that if someone doesn't want to use a case, that a good quality screen protector (front & back) is a must. Maybe those high quality glass (as opposed to plastic) ones will be available soon.
SteveYorks said:
When mine made it's leap for freedom from it's cozy sock tent it landed face down on onto stone chips on the driveway. It probably took the brunt of the force on about 5 or 6 points of contact, chipping the metal frame and it also looked like the the screen was chipped in about 4 places. On removing the screen protector the glass was still perfect. I'm convinced that if the protector hadn't been on there the glass would have chipped.
The free protector though does dull the screen somewhat, so I'd recommend that if someone doesn't want to use a case, that a good quality screen protector (front & back) is a must. Maybe those high quality glass (as opposed to plastic) ones will be available soon.
Click to expand...
Click to collapse
The frame is metal?
There's a thin band that goes around the glass at the front & back, I'm assuming this is metal, it would make sense to build it that way & not have glass held in place by plastic. Certainly the whole rest of the frame is plastic.
I don't want to chip it any further just to test my theory though. :silly:
The back glass on mine has cracked today too, only a day after I received it
SteveYorks said:
There's a thin band that goes around the glass at the front & back, I'm assuming this is metal, it would make sense to build it that way & not have glass held in place by plastic. Certainly the whole rest of the frame is plastic.
I don't want to chip it any further just to test my theory though. :silly:
Click to expand...
Click to collapse
Does it feel particularly cold, like metal? My Xperia Acro S has a similar kind of band around the glass, but it's plastic. It never chipped though, despite having it dropped on hard floors multiple times. I think Sony chose a material that is easily chipped in order for them to prove "abuse" more easily.
Drops
I've had mine a couple of days, and am to frighted to use it, it looks very fragile after my blackberry, the ports are crazy flimsy, I won't use it until I get a really good case, first impressions are that it will easy break, maybe I should send it back and stick to my reliable blackberry. So sorry to hear about the phone drops, it scares me to use mine.
_Belial said:
The back glass on mine has cracked today too, only a day after I received it
Click to expand...
Click to collapse
How this happen?
_Belial said:
The back glass on mine has cracked today too, only a day after I received it
Click to expand...
Click to collapse
How did it happen?
galuquetta said:
How this happen?
Click to expand...
Click to collapse
It slipped off the arm of the sofa about 2 feet into a wooden floor. It's very slippy and it certainly needs a case I've never had this happen on a phone before.
Currently I'm using an S5 without any cases or covers, and it's still drop-proof, dropped it multiple times on hard floor/concrete and there is no damage on the screen what so ever. And before that I had an HTC One X, which is probably more similar to the Edge in that the screen isn't protected if it drops face down, I did eventually crack it with that kind of a drop. However the edge is gonna be even more problematic because even the back is glass, and no plastic protruding edge to protect it.
Sure I could put it in a bulky case but then it kind of defeats the purpose of having one of the most premium feeling phones ever doesn't it? It'll also negate any ergonomic benefits of the curved back edge as well as the ease of edge swipe on the front edge. Might as well just get something like a.... I don't know, nobody makes high end plastic phones anymore now days, even cheap phones like One Plus is front+back curved glass. Also this thing is already a bigger phone than what I'm used to, adding a beefy case is just gonna make it that much bigger, which I do not like.
Well I guess plenty of people did survive the iPhone 4 glass sandwich era just fine, I'll just have to wish myself luck. I wonder how much would one of those adhesive skins help in a drop situation. Sure they are very thin but if think about the physics of it, gorilla glass is actually quite flexible so it doesn't break from the acceleration of the impact itself, so thinness doesn't really matter. What actually breaks these surface hardens glass is usually a microscopic failure on the surface developing into a big crack. And those microscopic failures can happen when they make contact with sharp hard stuff like individual sand particles, they effectively puncture the surface and develop a weakness. So if you have a skin on the glass, what'll hopefully happen instead is that the skin will be thick enough for the particle to not make direct contact with the glass, and prevent breaking. Even though such thin skins cannot significantly reduce the impact acceleration.
I understand your points, but please, don't ever try to use this phone naked. You NEED a case, the grip is so bad that dropping it is almost a guarantee and the back glass seems to be much more fragile than the front glass from what I have seen in videos. About the cases, you may want to look into the Samsung official plastic backs or (when available) the leather backs. The official plastic back cases from Samsung are the only ones (in my opinion) that really do not ruin the phone's design, the design remains almost intact. However, while the grip is much improved over the naked phone, it is nowhere near other bulky and rubberized cases. A rubberized plastic wrap would be a solution, but the big problem still remains - the metal sides of the phone which are very narrow.
PS: As I understand from the latest spy pics, the iPhone 7 will have a glass back again...probably needed for radio/charging/payment/other secret developments.
There are plenty of case available that won't make the phone look s**t. I'm using a Spigen Crystal Clear, a very good combination of protection and looks. It's impossible to completely keep the phone's look and feel, but it's probably as close as possible whilst being confident of being able to accidentally drop it from pocket height without damage.
Glass protectors on these curved screens are to be avoided, that's my personal opinion anyway. My brother bought numerous types of these for his S6 Edge (expensive and cheap) and not one went on properly without raising on the curves within twenty minutes, causing touch problems on the edges. Go for a good quality film type like a Zagg HD Dry.
I copied you entirely mate I'm not ashamed to say. Got my Spigen Crystal Clear yesterday and, your right, it does look good, but not as good as the nekkid phone itself. But I guess that's the price of good protection.
Just waiting for my Zagg HD Dry front and back covers to arrive today.
I'm personally using Otter Box Commuter for me and my wife's phone. I was able to try it on in store before purchasing. I was sort of desperate for a case on delivery day and it was the most protective case I found. I'm happy with it overall. It's sleep and slim and although the whole front in uncovered it does have raised top and bottom edges so if the phone falls flat the screen doesn't actually touch the floor.
Sent from my SM-G935F using Tapatalk
Use it naked.
Control your fingers.
nobnut said:
Use it naked.
Control your fingers.
Click to expand...
Click to collapse
Too risky lol
Sent from my Blackberry Bold
I would love to use the phone naked as it just looks so good, but I am scared to risk it. I have never dropped and cracked a phone, and I had an Iphone 4S without a case for 2 years which were well known for getting smashed, I have a clear case on the edge at the moment to offer it some protection.
Carrying and using smart phones without any case is just asking for trouble. I have the S7 Edge and when it arrived on March 2nd it stayed at home in the box until my Spigen Ultra Hybrid case arrived (which was a few days later). I was still using my S5 because I didn't want to take any chances.
After my case arrived I put it on but I still keep the original plastic film on the screen because I was waiting for my Skinomi screen protector to arrive. My Skinomi arrived yesterday and I installed it last night.
So if you don't want a bulky case get the Spigen Ultra Hybrid (I went with the crystal clear color). I ordered my case and screen protector from Amazon. The case is very nice looking and doesn't add any bulk to the phone.
Sk17z0 said:
but I still keep the original plastic film on
Click to expand...
Click to collapse
Oh my.
I'm using this case. It's amazing. Thin, easy to grip and not too expensive.
http://www.bodyguardz.com/unequal-shock-case-samsung-galaxy-s7-edge.html
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Juuls said:
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Click to expand...
Click to collapse
Q.E.D.
Hi folks,
I'm looking for feedback on oleophobic coating.
No matter whether it's the native glass or screen protectors, I just need to look at my phone and within seconds it's a mass of disgusting fingerprints.
Has anyone here any experience/recommendations of oleophobic products that actually work at keeping fingerprints at bay?
Your feedback would be much appreciated, even if it's only to confirm my thoughts that they're all just 'snake oil'.
Thanks.
I tried some products, and not a single one worked, I just accepted the fact, only way to reduce finger print smudges is to keep hands reasonably clean, cleanning the screen repeatedly or compulsively will at some point make micro scratches due to very tiny silica particles in the dust, this, I learned the hard way...
2 second wipe of my display and it's pristine again. Also, this is a Note device so I'm constantly using my S-Pen which helps lower the amount of fingerprint smudge.
I haven't touched the bare factory glass, so can't comment there. But the factory installed screen protector was very oleophobic in my experience. And my Whitestone Dome is almost impossible to leave fingerprints on it. Maybe you just have naturally greasy fingers?
Now the back glass? Ha! If I look at it, it gets a fingerprint mark.
Almost new
I bought my phone in early February. Removed the protective film early March, and 3 weeks later I can't hardly use fingerprint without wiping the screen thoroughly first.
The area where I swipe with my thumb is completely missing oleophobic coating.
I even bought my first leather case ever the day I removed the protective film.
Anyone know If Samsung has any warranty for that kind of stuff?
Vicemania said:
I bought my phone in early February. Removed the protective film early March, and 3 weeks later I can't hardly use fingerprint without wiping the screen thoroughly first.
The area where I swipe with my thumb is completely missing oleophobic coating.
I even bought my first leather case ever the day I removed the protective film.
Anyone know If Samsung has any warranty for that kind of stuff?
Click to expand...
Click to collapse
LOL
Vicemania said:
I bought my phone in early February. Removed the protective film early March, and 3 weeks later I can't hardly use fingerprint without wiping the screen thoroughly first.
The area where I swipe with my thumb is completely missing oleophobic coating.
I even bought my first leather case ever the day I removed the protective film.
Anyone know If Samsung has any warranty for that kind of stuff?
Click to expand...
Click to collapse
Doubtful IMHO because the screen works and detects your touch input. If your having to wipe it a lot before it will work then make sure your not smearing something onto the screen.
The oleophobic coating can wear off and from what I can interpret that's normal wear and tear (especially if your having to wipe the phone a lot) and not manufacturer defect. Granted it's always best to get a hold of Samsung yourself and ask them if it is covered under warranty... It may very well be, but only they will be able to tell you for sure with your phone.
Side note - If your trying to use the fingerprint sensor and can't without wiping the screen first then (based on your wording) your maybe doing it wrong. You don't swipe your finger on the sensor... You touch or tap your finger on the sensor. You can always also try deleting and re-registering your fingerprints using the instructions it provides, and also consider ensuring the phone firmware is up to date (in case any patches/fixes are included).
It's the oleophobic coating that has Weared out in that area.
If the screen is locked I unlock it with my fingerprint, and after that I swipe it open with my thumb.
And for some reason the oleophobic coating disappeared at that spot across the screen after a month's use.
So to be able to use my fingerprint, I have to clean the screen from the smear first.
Vicemania said:
It's the oleophobic coating that has Weared out in that area.
If the screen is locked I unlock it with my fingerprint, and after that I swipe it open with my thumb.
And for some reason the oleophobic coating disappeared at that spot across the screen after a month's use.
So to be able to use my fingerprint, I have to clean the screen from the smear first.
Click to expand...
Click to collapse
My phone screen gets dirty and full of fingerprints. Despite that I have zero issues with the ultrasonic fingerprint detection.
Now if the screen gets extremely dirty thats a different matter... but I'm talking more then just a finger print or smudge of a finger print. I'm talking things like if I handle foods or materials (especially ones that leave sticky residue on the screen) that leaves a residue on the screen. This could cause me some issues, but that is understandablly normal and why I clean my phone once a week using a soft microfiber cloth.
I just wanted to throw this in even though I'm mad late, but I had my note10 replaced on warranty. I specifically stated that the oleophobic coating had worn out too soon and I believed it to be a defect. It's only been a few months since then and it's already worn out again. I'm gonna try a Whitestone Dome.
I'm using IQ Sheild. I wipe it down every now and then with a dry microfiber cloth, dampen slightly if needed.
Looks great at the 3 month mark with no scratches or mars.
It still retains its original surface feel/qualities.
If I need to replace it tomorrow I got my money's worth out of it. Very pleased with its performance.
After 10 months, I have zero scratches and the oleophobic coating still works, not as day one, but reasonably well, at least it is still very easy to clean after smudging appears, I kept the preimstalled film for three months, at that point, it was somewhat scratched, and made the screen look ugly, I peeled it off, and to this very day, I enjoy the naked display in its full glory
winol said:
After 10 months, I have zero scratches and the oleophobic coating still works, not as day one, but reasonably well, at least it is still very easy to clean after smudging appears, I kept the preimstalled film for three months, at that point, it was somewhat scratched, and made the screen look ugly, I peeled it off, and to this very day, I enjoy the naked display in its full glory
Click to expand...
Click to collapse
It will be fine until it faceplants on gravel etc or you get sand rubbing across it.
I live in the desert. It took only 6 months of no screen protector to get my S4 screen scratched even though I kepted it as clean as possible. Gorilla glass 6 is not more scratch than 4... the writings on the wall.
I did the S4 scratch test as an experiment as the LCD was already heat damaged.
The 10+ is always in a case with a screen protector and is spotless. I have zero issues with useablility or viewability and a high degree of necessary protection for a $1 G device.
Cleaning: best to a microfiber cloth to clean to glass or plastic. Ok to use dry, shake it out first even if just cleaned.
Use pure water for it's final rinse when washing.
I've used this method extensively on pro cam equipment including the plastic covered LCD displays without scratches. Always carefully clean off heavy debris like mud first though with running water.
Cloth, paper towels etc -will- scratch glass*, best not to use to clean optics with.
*only takes a grain or two of sand. Microfiber clothes help keep contaminants away from the item being cleaned very effectively.
I share with you the sand problem, as I live some 100 meters away the beach line, there is always wind blowing, and at some times, really strong gusts, not to mention when it is stormy, and yes, sand is a real nightmare
Yeah at least the 10 is well sealed... the older Notes weren't.
RickyShade said:
I just wanted to throw this in even though I'm mad late, but I had my note10 replaced on warranty. I specifically stated that the oleophobic coating had worn out too soon and I believed it to be a defect. It's only been a few months since then and it's already worn out again. I'm gonna try a Whitestone Dome.
Click to expand...
Click to collapse
Same issue. Ordered Oleophobic coating and we'll see
boofman said:
Same issue. Ordered Oleophobic coating and we'll see
Click to expand...
Click to collapse
This doesn't surprise me.
Your dry fingers/palms are actually abrasive.
They can and do polish glass.
On large concave telescope mirrors they use the palm of their hands in the last phases of shaping it.
I've polished out very fine scratches on L glass lens coatings* using just a clean dry finger. It takes about half an hour.
*these optic coatings are hard and very thin. Without them the optics are degraded.
blackhawk said:
This doesn't surprise me.
Your dry fingers/palms are actually abrasive.
They can and do polish glass.
On large concave telescope mirrors they use the palm of their hands in the last phases of shaping it.
I've polished out very fine scratches on L glass lens coatings* using just a clean dry finger. It takes about half an hour.
*these optic coatings are hard and very thin. Without them the optics are degraded.
Click to expand...
Click to collapse
It goes without saying that we all need screen protectors despite Gorilla Glass and oleophobic coating