Once again they got my money and forget about thecnical support
I need help.
I have a Ipaq HW6915 and I need to update firmware with a new ROM , because Ipaq freezes on boot start . I tryed soft and hard reset and didn't work .
I think my Ipaq is from Netherlands .Part Number : FA736AT#ABH
Can anyone help me with a compatible ROM ,please ??
I give you my HP online assistence resume . See it ... LOL to tears ...
ht*p://i871.photobucket.com/albums/ab276/amalucado/hpassistance.jpg
Unfortunattly I like very much my old PDA ... and I try to keep it working.
Please ... Help me .
Related
hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...
...............................................
100% solution...
search ....
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
and run.....
reply me..... mail : [email protected]
i am also in india.....
and trying rom upgrading .... replacing so many times...
want to see smile on your face...
Sachin Gawate
Karad Dist Satara [Maharashtra]
You can DO IT
abhayjeet said:
hi guys,
i m abhayjeet singh frm india and had bought orignally an o2 neo xda phone with dopod rom and accidentally installed the o2 neo update frm o2 germany site...which installed smoothly.i did'nt knew that it would be in germany......so can anybody pls help me in reverting back to the dopod or any other english rom. i had tried to install back the dopod rom but in vain. maybe due to cid lock....pls help step by step and location of the softwares......there are already many forums about this but could'nt understand a word...pls hepl me urgently and pls contact me on [email protected]....
warm regards,
abhayjeet singh(abhay)
Click to expand...
Click to collapse
hi I m from also from India...
had same problem
Solution
you can go to ftp://[email protected]/Prophet/Shipped_Complete_Updates/
if it asks you for any user name and PW use
Username: xda
Password: xda
Pls remenber to login first and than download.
Download the PROPHET>>>DOPOD>>>>NO VENDOR ID WWE As ENG.
Then go to the go to the boot up screen on phone (HOLDING RESET+ CAMERA AND COMM MANAGER BUTTON)you will come to a screen displaying only 3colours.
Now connect to your PC run the software (WWE version)remenber you choose no vendor ID or u will be stuck...
after connecting do as screen shows next>>>next .... it will install the WWE ie.,World Wide English.
pls dont download crossbow ie WM6 as there are still some issues with the ROM
Pls tell me if it solved ur problem...
Dont worry its a common problem with all beginners..
hello everyone..please can someone give me the link to downgrade my PDA2K to 2003,by the way im using wm6,,thanx alot
This should work just fine: http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 and please, there is no need for big red letters ok?
if you have the I-mate Pda2k its solved !
jus go to the Ftp site and grab the latest (Wm2003 se ) rom and flash it thats it ..... "ftp://ftp.clubimate.com/i-mate_PDA2k_Arabic_13100_112_10600_SHIP.exe" since you are "iraqi" i wrote the link to the arabic rom you can just download the english one grab it from "ftp://ftp.clubimate.com/" and whut is the point of downgrading ? .... WM6 Rules !
sry i forgot to mention sumttin
you have to set it in the boot loader mode ... i think thats whut its called when the "serial" and then "usb" appears only ... you have to press power button and record and camera and reset all @ the same time ....
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103
Hi,
Im have the problem HP screen with vg.39 on my ipaq HW6940.
I try to reinstall the firmware but i cant, the hp utillity doesnt find my device.
So i ask for help, i read that many devices doesnt work the phone function after this problem, but if i can get my device work i will be happy. Just the pda function working i will be happy!!!
So please someone could help me??