When I start up my touch dual niki100, it comes up an error of "quickdial.exe". I think it might be the necessity of touchflo cube 'cos the latter one does not work either.I pull up from the bottom of screen, the cube comes out but it stucks in it's first scene. What should I do to get it recovered?
please help Q_Q
Well... i had that problem too on my niki!
What I did to fix that was a simple "hard reset" and it camed back to normal.
But, if that doesnt work(It did for me), you can try to instal another version of WM?
Hope that helped.
Related
has anyone else problem with the htc home customizer??
i need to take a hard reset after rebooting
Same thing
You have to change the originale HTC Home with Kaiser.HTC.Home.v2.0.814.722-schen
But i prefer keep 4 tabs 'cause the display is smaller and tabs would became too small
I hv the same problem,
finally I need to restore the backup file ....
I used HHC without installing any homeplugins.
Just installed HHC and modfied the original homeplug from the device.
No problems so far.
But i have a xda star (o2 branded dual), so the roms may differ...
Same here - worked like a charm
Same here it crashed on me!! had to hard reset! I guess it only works with certain touch dual ROM's e.g. O2.
Hi Folks.. just tried the HHC also and cant enter the device lock code.. no response of any soft or hard key of my nike (o2 xda star)
any chance to solve that without hard reset? made so many customizations without backing up
Hi guys, when you installed the customizer into the phone, did you ever see an error message "Can't find the tapsetting" ? I guess this is the main problem ....
DO NOT touch the "Tabsetting" key!!
i tried to manually add the "Tabsetting" key under HTCHome... now, like after installing HHC, all soft & physical keys not responding.
hard reset in progress...
-------
(further update)
seems the HTCHome version can really handle this key... yet i couldn't find the right data type and data value to enable the music player tab.... i could only find some possible values that lead to zero tab or disabling all soft & physical keys.
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
t0p0gigi0 said:
Guys,
I've a worster problem that is after install htc customizer my touch Dual goes nuts and neither soft and hard reset solved the problem.
I say worster, because at this moment I even can't start my Touch Dual. It block always or in windows screen or in PIN screen and don't let me write anything.
I don't have more ideas.
CAN ANYONE HELP ME PLEASEEEEEEEEEEEEEEE?!?!?!?!?!?!?!?!
Click to expand...
Click to collapse
Done
Stupid manual..... say to do ENTER to reset phone, but do not specified that enter is not exactly the enter key of keypad but it's the key in middle of direction cursors that is between RED and GREEN keys.
At least I hope this helps anyone.
UK Orange Touch Dual here, no problem with HHC at all
U have to change the language of the HHC, i had the same problem with italian HHC and English Home plugin.
After reboot, WM6 don't loads. ( sorry 4 my bad english )
Haven't encounter no problems, works smoothly and nicely.
I have put the Four icons in a row hack on my friends Diamond from here:
http://forum.xda-developers.com/showpost.php?p=2462244&postcount=16
looks cool and i want it 2.
i need to no will the above work on my ELF?
Or is there another way to do this?
I dont want to try without someones advise cause i have just got my ELF lookin & workin
Purfect.
"dont want 2 Hard Reset"
I am running WM6.1 Touch Essential (which is fantastic)
Thx.....
You can try this ...
http://www.pocketnow.com/index.php?a=portal_detail&t=news&id=5671
Hello,
I would just like to know if there was a way to not have the Xperia panels installed on my Xperia.
When you start the phone for the first time, you can see that the panels are installed.
So, I would just like to have a fresh WM, and after install the touch Flo3D from manilla cab.
The reason is that I have some freeze when having XPanel and TouchFlo installed.
Thanks for your help.
Regards, Nicolas
if u dont press the X Button then no panels will come up.
and u can also unselect them from the panel option on right bottom of screen the 9 panels are being displayed
no panels
ok...i dont post on here much but obviously you are either new and have not looked in the rom development section yet or are just being lazy and dont want to.....what you want is the flash either touch-it xperience or jack's rom.... there are a couple more roms you could try. but doing so might void any warranty's you have. if you dont care then do it.... if you do care then just do what the guy above said. leave your phone on the today panel and just not use them.
i know what you mean when it freezes ...the only thing i can thing of for you to do is after the master reset when its installing all the application do a reset there so the xpanel would not be install that mean TF3D would not install as well...just install the TF3D back in manually
Hi my friends!!
Good Morning for everybody (cause for me its is)
So my problem is simple, I try to install on my diamond the .cab about flip clock be tinny and stay on left-top on my screen, I guess everybody knows this cab. (u can see something on this forum)
So, I deselect the today, install the cab, restart normally but when i turn on my phone, and set on the today screen, the clock stays on left-top, but all the rest of menu like slidebars, and the middle of screen its frozen.
Appear all the time a word Title
and the slidebar dont appear nothing, and don't slide.... appear like glass slider but frozen...
Know somebody can help me?
How I turn back to original without make a format on my phone...
or how i can fix that?
Other thing its if somebody can teach me how make this clock on TF3D 2 ????
Pleaseyy help me ladys & gentlemans!
C ya!
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
calsi said:
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
Click to expand...
Click to collapse
Open your start menu, select "settings". On the first tab, choose "Today"
On the next screen, choose the "items" tab, and then you'll see a checkbox in the list for TouchFLO 3D, just check that, then hit "ok" to exit. When you return to the home screen, you should have TF3D back.
This is the method to turn TF3D on/off when you're doing things like installing cabs that change the look of TF3D in any way.
Touch FLO 3D Back again
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
calsi said:
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
Click to expand...
Click to collapse
Glad to help!
Yes, any time you run cabs that change the appearance at all, it's always a good idea to turn TF3D off first, just to make sure there's no issue with the cab accessing files etc that it needs to modify.