[Q] Please help!! I may have messed up my MT3G!! - myTouch 3G, Magic General

Okay, so I installed a radio version 2.22.27.08 via clockwork recovery on my 32A device when it should be only used on 32B!!!! I wanted to use yoshi's rom and I followed the directions but must have clicked on the wrong one!
I downloaded the old radio (3.22....) and tried to flash it via fastboot (it only comes in a .img file) but it keeps failing on the signature!
Is there anything I can do to downgrade to that radio?
I made a nandroid backup and my phone still works fine with the wrong radio, but I am not able to install another rom that I want!

Give us complete fastboot info

Related

Flashing problem on Magic_Rogers 3.54.631 rom

hi everybody!
some days ago i flashed my magic (TIM Italy, so 32A) whit the Magic_Rogers3.54.631.3 rom, that was a ruu exe file.
It flashed my spl and radio, that now are hboot-1.76.0010 (SAPP10000) and 6.35.16.19.
Now i wanted to change rom because of the language (i'm not able to put an italian dictionary when i write), but i don't succeed.. i tried to reflash the recovery, but i can't because fastboot says that is not possible to send data to the phone, so i can't also boot some recovery image.. same problem via adb or via terminal on the phone.
i rooted the phone with the last universal androot, but it's the same..
i succeeded to change recovery only with rom manager, but the phone doesn't go in recovery mode (it's still on the "rogers" splash screen), or if it goes, it reboot alone after a few seconds.
oh, at last, i'm not able to flash other rom, like the RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver or my original TIM rom.
I'll be really grateful to who will help me!!
thanks for reading!
download this application FlashRec
install it to your device
then download any of Amon_RA recovery imgs (HERE) (Choose the correct one for your device)
then push it to your sdcard
then open the FlashRec and press backup,
then write in the blank box "sdcard/xxxxx.img"
where xxxxx is the name of the img you pushed to your SD
then press flash .. if it is successful, connect your phone to adb
and write "adb shell reboot recovery"
I tried this on 32A 1.33.0010 and Radio 3.22,
I'm NOT 100% sure it will work with you,
try it at your own risk.
it says "phone type is EBI1/32A"
i press backup with or without the name in the box,and the result is
"backup failed: could not run command."
first: this is the false place for this thread. this is for general!
second:
follow this thread http://forum.xda-developers.com/showthread.php?t=756918
it is not possible to flash or backup with flashrec. the new roms are bugfixed.
renedlog said:
first: this is the false place for this thread. this is for general!
second:
follow this thread http://forum.xda-developers.com/showthread.php?t=756918
it is not possible to flash or backup with flashrec. the new roms are bugfixed.
Click to expand...
Click to collapse
I think you are right, because i was on stock 1.5 when i used this method.
OmarAta said:
I think you are right, because i was on stock 1.5 when i used this method.
Click to expand...
Click to collapse
me too... but the htc magic 32a with the actual stock rom, android 1.5 with sense form january, is already bugfixed.
Moving to General
sorry for the mistake, i thought it was the right section..
anyway i followed the guide in the post linked by renedlog and.. it worked!!! i didn't know where to put the flash_image file.. but it was written there.. so i did all, and now my rom is the RCMagic 5.0!
do you think it's good to try something different?
i use RCMagic 4.2
the version 5 is still a little buggy with the wake up from standby.
i will upgrade to an android 2.2 rom, if there is an update today for the 32B and hopefully it will be patched to my 32A.
yeah, i saw that bug.. it's really a pity, the rom was a little faster than the 4.2..
i suppose it would not be a big bug, so i hope somebody that is able will fix it!!
are there so big changes beetwen the 2.1 and 2.2?

[guide] PS3 hack [Magic 32a | 3.22radio]

As I had some difficulties putting together the guides out there, for the ps3 hack, and used quite an amount of time, figuring this out.
I finally managed to prepare my phone for this, so I though I would share
1st you need the right radio and SPL (HBOOT) and custom recovery
2nd you need to flash Cyanogen mod 6
3rd you need to flash EIB1 port
and at last you can flash the PSfreedom mod kernel​
The guide:
1. the goal is to obtain 3.22 radio and 1.33 SPL and custom recovery. Use this tool
http://forum.xda-developers.com/showthread.php?t=824435
1.1 It's important you don't have radio/SPL mismatch in order to use this tool. If you have 6.35 radio, you need to flash 1.76 SPL first.
1.2 After this you can flash old files (this flashes both 3.22 radio, 1.33 SPL and custom recovery.
2. Now, you can go on and flash cyanogen mod 6.0.0. I used the froyo redux modded, but i recommend using this clean install though
http://forum.cyanogenmod.com/files/category/3-htc-dream-htc-magic/
2.1 flash it, by using custom recovery. get into recovery by turning of phone, and press and hold "home" + "power" buttons.
2.2 1st you ned to wipe "data/factory reset" and "cache" (i wiped dalvik as well)
2.3 go back, and choose "flash zip from sd card" and locate the zip file.
2.4 reboot to make sure everything is fine
3. Now you can flash the EBI1 port, from here, for the 6.0.0 version, via the custom recovery
http://forum.xda-developers.com/showthread.php?t=592377
3.1 reboot
4. Finally you can flash the PSfreedom kernel. get it from here
http://psfreedom.com/wiki/HTC_Magic_32A
4.1 reboot
Finally, you are ready to hack your ps3.
For further instructions follow the already made guide for PSfreedom here
http://psfreedom.com/wiki/index.php?title=Using_psfreedom
feel free to comment, so we can make this guide as accurate as possible, in case I should have forgot something or written something unclear
Good luck!
Why don't do you just flash ps3 custom firmware?
The 3.55 have been out for quite some time now.
I did that long time ago and it's working perfectly.
The usb-dongle hack is to annoying.
For your guide to work, you must have 1 requirement at the first step.
The device needs an eng spl for it to work.
The rest seems all ok :0)
Anyway, thank you for making a contribution.
Heh... yeah I found that on youtube today (CWF)... haven't gotten it to work yet though... but it's only transfering the game to internal though, so I guess it doesn't matter which method I use, dongle or no dongle...
but upgraded to CFW 3.55 too now.

Is there a chance for my (new) Magic ?

Hi all,
Well, that's the way, it sometimes goes....
On Tuesday i received in exchange my new Vodafone Magic. After only two days i'm stuck with a "deadlock" situation. Following happened:
The Magic was delivered with the standard 1.6 Donut on it. I then manually flashed the OTA update to 2.1.1 and the apps that I use regularly. Yesterday I used the "Gingerbread.apk from the XDA forum to gain root. Armed with root, i downloaded Rom-Manager from the Market and installed ist. Next, i installed the Clockwork Recovery via Rom-Manager. Then reboot into the recovery and Voila .... Clockwork recovery.
Ok, first thing i did was to make a backup of my current ROM and then came the big mistake ...
I wanted to have a black Notficationbar in OTA. So i flashed "blackbar.zip" from "http://www50.zippyshare.com/d/43974308/12150/blackbar.zip". But after reboot it didn't work (Bootloop).
Well, I thought I reboot back into the recovery and restore my backup.
And then came the shock ...
What I saw then was not the Clockwork recovery but the original HTC Magic recovery.
Ok, tried to flash the 2nd part of the OTA Update again.... Nope. The HTC Recovery reports "Assert Failure". Obviously checksum tests are done and after flasing the blackbar, "framework-res" no longer matches the checksum.
OK, so back to 1.6 with the NBH Image .... Nope, The Magic reads the image, but refuses to install with the comment "main version is older"
Since the OTA update, installs an "S-ON" Spl, no more fastboot...
Searched in Google and found a lot of Posts saying "try using this image", "try using that image", but nothing worked.
So the Situation now is as follows:
- Magic can not start anymore. Bootloop in the "android" Bootscreen
- Fast boot is not possible because of the SPL
- New import of the OTA update, part 2 not possible due to checksum error
- Back to 1.6 not possible due to "Main version older"
- I only have the the original Magic Recovery. (and of course can boot into HBOOT / FASTBOOT mode)
What I would need would be a flash-ready image of Enginnering SPL or an update, however, in the format, which is accepted by the original recovery of the Magic. I also dealt with the idea of creating a Goldcard. Could this be a way to save my Magic?
Has anyone else an idea, or anyone knows how to create a flash-ready image, which is accepted by the original recovery?
Thanks and greetings. lagloose
Is this a 32B or 32A? I've been in that situation before. If you can get into fastboot you can save it. Get a RUU (for 32A I used 3.5.401 from Rogers) and install it. In the process, it'll try to get the phone into fastboot mode, but it's already there, so you'll factory-reset it. After that, you can apply an Engineering SPL through update.zip (using the recovery from the RUU itself, not AmonRa or others's) and then you can do anything else you want on your device.
Good luck! ^^.
I think you're going to have to make a goldcard, which is a problem since you can't boot. If you can somehow make (find?) a goldcard then you should be able to flash a RUU. Can you post you're device specs? Vodafone Magics are supposed to be 32A's right?
I don 't know your phone information,but i think you need a goldcard and flash ruu

15MB extra RAM for ht-03a using T-Mobile bootloader and radio

Posted by SBS
I flashed the new SPL and radio that also came with the T-Mobile Froyo OTA giving myself an extra 15 MB of RAM. This post attempts to compile the background and links to the knowledge needed to do this safely. Because this is much more complicated than rooting with universal androot, and you can very easily brick your phone, this should not be done if you don't fully understand the process and aren't comfortable using the command line. While I believe someone may have created flashable signed zips for doing this, the recommended way is to use fastboot.
The Benefits
ROM Memory Swap Total (KB) Total (MB)
Stock
97708
0
97708
95
Rooted old SPL/radio
97708
31316
129024
126
Rooted new SPL/radio
112844
31316
144160
141
Without swap, that is an additional 14.8 MB of real memory.
First, a few things you need to know before proceeding:
Perfect Secondary Program Loader
The ht-03a shipped with a "perfect" SPL that does not allow remote fastboot. Therefore, an interim engineering SPL will have to be flashed in order to use fastboot to flash the new SPL (1.33.0013) and radio. The new SPL is also perfect, but a version was modified for the Dream/G1 (1.33.0013d) that allows a few fastboot commands, such as fasboot erase system -w for a complete wipe. Fortunately, 1.33.0013d has been confirmed to also work on the ht-03a, a Google-branded 32B magic.
Even with the modified "d" version of the new SPL, you cannot remote boot a recovery image, flash new splash screens, flash a new recovery image (if for example yours became corrupted). You will have to flash an engineering SPL, do what you must, then reflash 1.33.0013d. Unlike flashing ROMs, flashing SPLs is not 100% risk free.
Amon_RA Recovery Recommended
I'm sure this will probably get some feathers ruffled, but I am leery of clockwork recovery and ROM Manager. As outlined here, this is not the developer's fault but a low memory issue. Perhaps this new SPL and radio will fix that, but the fact remains that there have been a number of instances Dream and Magic users getting stuck with no working recovery. With an Engineering SPL, this is no problem because fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img fixes this, but with a perfect SPL, it will be much more difficult, as in making a goldcard difficult.
Another fact is that I have yet to hear of this ever happening with Amon_RA's recovery, and ezterry at XDA is suggesting to use Amon_RA. However, using Amon_RA means you can't use ROM Manager.
(NOTE: ht-03a users need "G" versions of Amon_RA)
Patched Kernel Required
If you are like me, you never cared about kernels. Yeah, you might have been interested in testing out some of the overclocked kernels but you were perfectly happy to use whatever the developers included with the ROM, which will likely be the most stable way to go but maybe not the fastest. Stability versus bleeding edge. For the time being, those days will be over. All of the cooked ROMs available right now will need a patched kernel that may or may not be included with the ROM.
I have no idea what is the "best" kernel. It will depend on what makes it the best for you.
Required Reading
Start with ezterry's XDA write up with links to the radio and SPL. If this doesn't make sense, stop and read more.
If you don't already have one, read the instructions on flashing an engineering SPL.
The SPL in the above link comes from this list of engineering SPLs.
Finally, you'll want to understand how to flash Amon_RA's recovery because it is less prone to problems than clockwork.
If you plan to use CM 6.1, ezterry's CM Forum post contains a port with the new radio.
Required Environment
Engineering SPL (I am using 1.33.2005. Many others are using 1.33.2009. IIRC, there might be issues with 1.33.2010 and CM, so 2009 is probably best.)
fastboot utility installed on your PC
Android SDK on your PC to allow you to use ADB (Perhaps this is technically not required but at this point of getting into your phone you ought to have it installed.)
What I did
The T-Mobile US Froyo OTA with a cyanogen kernel I've been running lately is by far my favorite ROM due to speed and stability. I've mentioned missing some CyanogenMod features, but when it comes to my phone, stability trumps the bleeding edge. So I 1) did a nandroid backup of my current ROM, 2) updated the SPL and radio, 3) restored the backup, 4) flashed the patched kernel, and 5) picked up where I left off with no loss of data on my phone. The actual work involved for me was about 10 minutes because I already had an engineering SPL and Amon_RA. I spent infinitely more time writing about this than I did actually experiencing it.
So far, all seems fine, but I'll need a bit of time to test. Wifi and GPS are working, and the phone does seem snappier. I haven't had a chance to see how battery life is. There are two choices of radio, 2.22.27.08 or 2.22.28.25. The former came with the OTA. The later is a newer radio. Depends on who you ask and where they live, which is better/faster/easier on the battery. For now I am using 2.22.27.08.
Rebooted to recovery and nandroid backup my current ROM.
Followed ezterry's instructions on XDA
Downloaded all necessary files and checked the MD5 sums against what was published.
dream_2708kit.zip which includes 2.22.27.08 radio and 1.33.0013d SPL
Kernel installer for CM Nightly 271
Mounted my SD card, copied the kernel installer to the root of my SD Card, and rechecked the md5 sum.
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
fastboot erase system -w
fastboot erase boot
Reboot to recovery and restore ROM.
Flash kernel.
Reboot normally.
Pray (actually I used ddms watch all the boot messages)
Play.
New v Old SPL/Radio
HBOOT Radio Context Type Security SPL Maker Fastboot USB
1.33.0006 2.22.19.26I
Stock
Shipping
On
Google
No
1.33.2005 2.22.19.26I
My choice
Engineering
Off
HTC
Yes
1.33.0013d 2.22.27.08
Froyo OTA
Shipping
On
Google
No*
*fastboot erase allowed
Here are the hboot/radio combinations I've had on my ht-03a, beginning with the Docomo stock configuration. After that I used the same radio with an engineering SPL. This was prior to universal androot with no one-click option for 1.6 Donut; An engineering SPL was required to root. Finally, I'm back to a mostly perfect SPL but with an additional 15 MB of real memory.
What most of you will need to do
NOT follow these steps but use them as A Docomo ht-03a SPECIFIC REFERENCE for ezterry's instructions.
If you are unrooted, root your phone and flash a custom recovery. clockwork is fine to start with.
Download and flash an engineering SPL from recovery (e.g., 1.33.2009, though I have been using 1.33.2005). VERIFY MD5 SUM after download and after copying to SD card.
Reboot to fastboot (power + back).
Download Amon_RA recovery (NOTE: that the code in exterry's guide is specific to a dream ht-03a users need a sapphire recovery tagged "G". "cyan" refers to the color scheme, not cyanogen.) VERIFY MD5 SUM!
Using the terminal, cd to the directory with the img file and fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img which assumes you have added fastboot to your path (Instructions for mac/linux here. Windows users on their own.)
Continue as I did.
Restore your previous ROM and flash the "2708" ported kernel of you choice.
Or follow these directions for CM 6.1 after rebooting to recovery.

[Q] Cannot boot into any custom ROM!

A friend of mine wanted to change the stock rom on his old tmobile MyTouch 4G to CM7.2
It is currently running the latest 2.3.4 (hboot_0.89.0007, radio 12.62.60.27_26.13.04.19), I unlocked the phone following the steps from HTC Dev website. And they explained that unlocking is enough to flash custom rom since it enabled write access to recovery, system and boot http://www.htcdev.com/bootloader/about_unlock_process.
I was able to flash and run both TWRP and CWM (twrp2.2.2.1-glacier-recovery & recovery-clockwork-touch-5.8.1.0-glacier) adn used them to flash CM7.2 stable and the latest nightly and some other custom ROMs i found on the developers forum at XDA, however, not of them do boot. The phone will get stock at the first screen showing Tmobile and myTouch 4g logo.
I followed many threads/steps that recommended downgrading to stock froyo first to turn security off (S-OFF) but it won't let me since it is older version, then some says to downgrade the radio first, but that is also not possible with S-ON and i get signature error. i tried doing it from the sd-card using the file name "PD15IMG.zip" for the stock rom but didn't work neither from the fastboot rebootRUU thingy.
From the recovery i wiped every thing even system, then checked it to make sure it is empty, flashed CM7.2 and mounted system and there are the files as they should be but it won't boot, and "adb devices" won't show anything so i cannot see the log. which means it didn't even start.
Am I missing something trivial?
* BTW, i had to lock the bootloader again to flash the stock 2.3.4 back, but I have the unlock token "Unlock_code.bin" and I can unlock it again if someone knows the answer to this problem

Categories

Resources