Related
I tried installing CM with CM Installer for MAC ... until it got stuck in bootloop.
Using adb I pushed image, still bootloop.
Reset to factory, cleared partition, flushed dalvik cache, all the same.
adb commands seem to work since I can make the phone reset and so forth.
details:
mako 16 GB
HW version - rev_11
bootloader version MAKOZ30d
baseband M9615A-CEFWMAZM02.0.1701.02
signing - production
secure boot - enabled
lock state - unlocked
recovery mode is CWM v6.0.4.7 (assuming it got installed by the CM installer for MAC)
tried by hand to resuscitate with cm-11-20141008-SNAPSHOT-M11-mako.zip and cm-11-20141107-NIGHTLY-mako.zip using sideload to no avail - still bootloops despite numerous factory resets and cache partition wipes.
any ideas please?
thanks
This is what i use: http://forum.xda-developers.com/nex...olkit-wugs-nexus-root-toolkit-v1-8-2-t2015469
Has multiple options for going back to stock, rooting, and lots of other things.
TreatnHerRight said:
This is what i use: http://forum.xda-developers.com/nex...olkit-wugs-nexus-root-toolkit-v1-8-2-t2015469
Has multiple options for going back to stock, rooting, and lots of other things.
Click to expand...
Click to collapse
That looks great ... and uses Windows only
I can boot Windows under VMWare Fusion on my MAC however not 100% sure if that would work within that environment as I need to do some USB passthrough.
Thanks for the pointer though.
ilmoomino said:
I tried installing CM with CM Installer for MAC ... until it got stuck in bootloop.
Using adb I pushed image, still bootloop.
Reset to factory, cleared partition, flushed dalvik cache, all the same.
adb commands seem to work since I can make the phone reset and so forth.
details:
mako 16 GB
HW version - rev_11
bootloader version MAKOZ30d
baseband M9615A-CEFWMAZM02.0.1701.02
signing - production
secure boot - enabled
lock state - unlocked
recovery mode is CWM v6.0.4.7 (assuming it got installed by the CM installer for MAC)
tried by hand to resuscitate with cm-11-20141008-SNAPSHOT-M11-mako.zip and cm-11-20141107-NIGHTLY-mako.zip using sideload to no avail - still bootloops despite numerous factory resets and cache partition wipes.
any ideas please?
thanks
Click to expand...
Click to collapse
Honestly, when I get into these situations I just flash the stock images and use that as a starting point. (I'm guessing your recovery is still working fine, given what you've said, so you can pull that out of the zip it sends so it doesn't write over it)
My approach, however, is usually, "damn, I messed up, let's go back to a known good point and try again" though, so keep that in mind if you decide to follow this path.
nic0lette said:
Honestly, when I get into these situations I just flash the stock images and use that as a starting point. (I'm guessing your recovery is still working fine, given what you've said, so you can pull that out of the zip it sends so it doesn't write over it)
My approach, however, is usually, "damn, I messed up, let's go back to a known good point and try again" though, so keep that in mind if you decide to follow this path.
Click to expand...
Click to collapse
That didn't work either (the restore to stock).
The USB passthrough on VMWare fusion works like a charm, ADB sees the device, passing commands on from the Windows application, rebooting and so forth.
However once it goes through the repair process at some point I get some strange cyan screen with white and lilac blinking lines and the program keeps saying "waiting for your device (or phone, or whatever" ...
Losing the will to live.
ilmoomino said:
That didn't work either (the restore to stock).
The USB passthrough on VMWare fusion works like a charm, ADB sees the device, passing commands on from the Windows application, rebooting and so forth.
However once it goes through the repair process at some point I get some strange cyan screen with white and lilac blinking lines and the program keeps saying "waiting for your device (or phone, or whatever" ...
Losing the will to live.
Click to expand...
Click to collapse
Why are you using VMWare? You should be able to download the tools you need for WIndows, Mac, or Linux.
Go and grab the Android SDK and install the "Android SDK Platoform-tools" and download 4.4.4 image from Google.
Once you have those two things, unzip the factory image and do "adb reboot bootloader" and then run "sh flash-all.sh" from a command prompt. This will use fastboot to write an img file to the partitions on the device, so if you can't run the SDK tools, for whatever reason, use fastboot to run the commands in the file. (That is, don't use recovery and adb sideload, do it through fastboot)
The -w option will wipe your data, so if you want you can try and run the last line (fastboot -w update image-occam-ktu84p.zip) without the "-w", but if it doesn't work then I'd try it again with it.
If you can boot into the bootloader and recovery then your device isn't dead. Worst case you have to go to a friend's place and flash it there.
nic0lette said:
Why are you using VMWare? You should be able to download the tools you need for WIndows, Mac, or Linux.
Go and grab the Android SDK and install the "Android SDK Platoform-tools" and download 4.4.4 image from Google.
Once you have those two things, unzip the factory image and do "adb reboot bootloader" and then run "sh flash-all.sh" from a command prompt. This will use fastboot to write an img file to the partitions on the device, so if you can't run the SDK tools, for whatever reason, use fastboot to run the commands in the file. (That is, don't use recovery and adb sideload, do it through fastboot)
The -w option will wipe your data, so if you want you can try and run the last line (fastboot -w update image-occam-ktu84p.zip) without the "-w", but if it doesn't work then I'd try it again with it.
If you can boot into the bootloader and recovery then your device isn't dead. Worst case you have to go to a friend's place and flash it there.
Click to expand...
Click to collapse
I am using VMWare Fusion since my Windows work laptop is dead (courtesy of lost charger).
So I must use my Mac (which used the CM installer where things went sour).
Doubt it is a problem since I can get ADB to work.
I have already dowloaded the Android SDK Platoform-tools and stock 4.4.4.
I used ADB on MAC, but after I copy the ROM the phone does some scroll-bar progress, then I clear partitions/factory erase/cache ... and boot loop again.
I will follow your advice and use the described process.
You are right - as long as I have bootloader I am safe.
Might go and buy Moto X+1 or Sony X3 ... as I want to go 4G but thought might use the N4 for another few months.
thanks
following instructions from nic0lette I have now my phone back to normal ...
will try CM using the same instructions ... well, using the flash-all.sh as a base script
thanks (and "thanked")
I have been asked to port my "Beginners Guide" from the TF700 forum for the TF300. Since both tablets are very similar, that was not too hard to do
If I have missed to update a link specific for the TF300, do let me know please.
And the standard disclaimer: I am not responsible if you misunderstand instructions I give here, if my instructions are wrong, if you forget to charge the battery and the tablet dies halfway through a flash or if your house goes up in flames. YOU DO THIS AT YOUR OWN RISK
These instructions assume that you are on the latest Asus bootloader: 10.6.1.27.5
To determine which bootloader you currently have:
From an "Off" state, boot the tablet with Volume Down and Power into the bootloader menu. Read the small script in the upper left. You'll see
US_epad-10.6.1.27.5-20130801" or similar.
US or WW, JP, CN is your SKU or region
10.6.1.27.5 is your bootloader version
20130801 is the build date (and immaterial in most cases).
First things first:
Backup everything on your tablet you care about to an external microSD or your PC. Don't worry about your apps. You can always install them from the Play Store.
This is just common sense. It is not inherently risky to flash custom ROMs. But something can wrong at any time and you have to be careful. If you are, this is a safe procedure.
Basically the process of flashing a custom ROM on the TF300 involves three steps:
1) Unlock the bootloader using Asus' Unlock tool
2) Install a custom recovery on the tablet
3) Flash a custom ROM of your choice using said custom recovery
Unlocking the bootloader
Your tablet should be fully charged at this point!
Make sure "USB debugging" is checked in Settings > Developer Options (if you don't see it, go to About Tablet and tap 7 times on Build Number)
Go to Asus website: https://www.asus.com/support/Download/28/1/0/9/8BmzkQ4yoz5WzBrW/32/
Choose "Android" for OS and look for the "Utilities" on the resulting page.
Download the Asus Unlock Tool v7 (not v8! It says v7 is for ICS but it'll work fine on JB - see below)
The tool downloads as a .rar file which is an archive you have to decompress. 7zip is a free and very good Windows tool that will do it for you
On your tablet, in Settings > Security check "Unknown Sources"
Copy the .apk you extracted from the .rar archive to your tablet.
Find the apk in your tablet's file browser, tap it and let it install
Open the app and follow the instructions. You will loose your warranty as soon as you click "I agree".
Update 2/15: Google added another wrinkle: It now checks even sideloaded apps and refuses to install them if they are considered not secure. The Unlock tool seems to fail their test. v8 does not install at all anymore. v7 will install if you allow "less secure apps" in your Google account settings. On the web - not your Google account on the tablet
July 2015: And another wrinkel... It seems to be pretty consistent now that the Unlock Tool hangs on the Google account password step. I suspect something changed on the Google side. It probably doesn't allow the tool to check/compare the password anymore. There have been quite a few security changes lately and the unlock tool never gets updated so I suspect that Google now is blocking access by the tool to it's servers.
The work-around is easy enough: Delete the Google account from the tablet (Settings > Accounts), then run the tool again. If that doesn't do it, do a factory reset from Settings, reboot and during the initial setup establish a WiFi connection but skip the google account setup, then run the tool
Click to expand...
Click to collapse
This can be a 5 Minute operation that goes without a hitch or a very frustrating experience with lots of error messages. There is no definite rhyme or reason for this. For some people it works like a charm, for others it works after 15, 25 or 55 attempts, for some never.... This problem is widely discussed on several forums. Google it if you hit that roadblock.
To check if you are unlocked, boot the tablet and read the tiny script. It should say:
The device is unlocked.
Installing a custom recovery on your tablet
I highly recommend you choose TWRP as your custom recovery. If you want CWM, you are on your own.
To push TWRP to your tablet you need to set up "Fastboot" between your tablet and your PC. Fastboot is a protocol that enables you low level access to your tablet.
Practice/Background
Power down your tablet and disconnect it from the dock
Push and hold the Volume Down key (left side of the rocker) and the Power key until you feel the tablet vibrate twice. Let go when you see the tiny script. Read it and it tells you that your tablet is now in fastboot mode and you will see three icons (I assume again you are on a JB 4.2 bootloader. In older bootloaders you had 4 icons and had to select the USB icon to get into fastboot mode):
RCK - (which should be flashing) is your recovery (the stock recovery at this point, but once TWRP is installed this is one way to get into it)
Android - is your system, selecting it boots you back to into your ROM.
Wipe Data - stay away! Especially with custom software installed never, ever use this option!
To toggle between the three icons use Volume Down, to select one use Volume Up. Try it but do not push Volume Up when the 'Wipe data' icon is flashing!
Installing ADB and fastboot plus the necessary drivers
For a working ADB/fastboot connection from PC to tablet you need:
a) Asus device drivers – if you connect the tablet to your PC and it's recognized as a portable device you should be ok. If not, download the Asus Sync Utility from their support/downloads site and install it to get the drivers, then uninstall the program from your PC if you don't want it. The drivers will stay.
b) Fastboot and ADB drivers which will be installed if you run the tool below.
Windows Vista, 7, 8, 10:
Download and run this cool little tool [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.1 - xda-developers (don't forget to hit the Thanks button)
The tool installs the adb and fastboot.exe to a folder on your C:\ drive (look for adb) and the corresponding drivers. Takes about 15 seconds.
On Windows 8 and 10 you need to turn off the driver verification feature. Here's a great video on how to do it:
https://www.youtube.com/watch?v=afrvSGiMAtk
Or - even better - here's a quick command line toggle to achieve the same (thank you @Jack_Hardin):
Jack_Hardin said:
If you're running W10, you can disable Device Driver Signing without following the procedure in the linked video, but by (more simply) right-clicking on the Start button, selecting Command Prompt (Admin) and then typing:
Code:
BCDEDIT /set nointegritychecks ON
Doing the same with OFF at the end of the string, as easy to guess as it looks, will reenable them.
Click to expand...
Click to collapse
Jack_Hardin said:
Win XP (and all other Win versions if the above does not work for some reason)
I recommend the "ADB Install Tool" mentioned above or the 'Minimal ADB Fastboot Tool': [TOOL]Minimal ADB and Fastboot [7-18-13] - xda-developers
Either works fine.
If you need the drivers, get them here and install manually in Device Manager:[ADB/FB/APX Driver] Universal Naked Driver 0.72 (We dont need no stinking HTC Sync) - xda-developers
Win7 and Win8 users seem to have the best luck wth the drivers sbdags provided here: http://forum.xda-developers.com/showthread.php?t=2646279
It's fine if you want to use his Recovery Install Tool from that thread. But I highly recommend you familiarize yourself with basic fastboot commands! There are lots of tuturials all over the web.
Linux:Check out this site https://code.google.com/p/adb-fastboot-install/
iOS:[GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!) - xda-developers or:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
The fun begins
Fastboot does not play well with USB 3.0, so use a USB 2.0 port for this. And no hubs and such....
Boot the tablet into fastboot mode and connect it to your computer via the original USB cable
In Windows Explorer navigate to the folder that contains your adb.exe and fastboot.exe
Win 7/8: Shift + right click and select "Open command window here".
For Win XP click here
select 'Run' from the Start menu, type
Code:
cmd
and hit Enter. In the resulting command prompt type
Code:
cd C:\adb\ [I](or whatever the path to your fastboot folder is..)[/I]
In the command window on your PC type:
Code:
fastboot devices
If that command returns a string of numbers and letters, you are good as gold.
Click me: View attachment 3070087
If it returns: "No devices found", fastboot is not working - yet - and you have to troubleshoot.
Getting the correct drivers working can be the hardest part of this exercise. If your computer does not "see" the tablet in fastboot, try to uninstall the existing driver (if any) in Device Manager and manually install the drivers I linked to above. And if Windows does not cooperate at all, PM me and I can hook you up with a Puppy Linux live CD with fastboot/adb set up already.
Let's assume everything is good:
On your computer go here: https://dl.twrp.me/tf300t/
Download the latest version of TWRP.
FYI ONLY: If, for whatever reason, you want to format your data partition:
Formatting /data starting with TWRP 2.7.x and later takes a lot longer than in previous versions (up to 90 minutes). LET IT FINISH. DO NOT INTERRUPT THE FORMATTING.
Rename the file to twrp.blob and place it into the same directory as your fastboot.exe. Note: More recent versions of TWRP download with an .img extension. Leave the extensions as is, rename the first part to watever is easy to type
Again check the connection with
Code:
fastboot devices
If you get the connection, in the command window type:
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
or
Code:
fastboot -i 0x0B05 flash recovery twrp.img
This will flash the recovery to the recovery partition
If it is successful type:
Code:
fastboot reboot
and let the tablet boot up normally.
You may get a dialog in TWRP offering to root the stock rom. You can accept or cancel it - doesn't matter. I assume you are going to install a custom rom and they are rooted anyway.
Create a nandroid
Your almost there! You are now on the stock ROM with a custom recovery installed.
Power the tablet down and boot into the bootloader menu with Volume Down and Power buttons.
With RCK flashing, push Volume Up and you should boot into TWRP. Familiarize yourself with the many options of the touch based interface without executing anything yet. TWRP is very user friendly. You basically cannot do anything of consequence "by accident", so don't be shy.
To create your Nandroid (a full system backup) touch "Backup", leave the default selection as they are and swipe the button to create a nandroid of your current system.
This is a very healthy habit to develop: You always want to have a nandroid of your last working system squared away so that you can do a simple restore if you flash something that does not work, or something goes wrong during a flash. With a working recovery and a good nandroid you are minutes away from a working system if you soft brick your tablet.
Hint:
It's a good idea to have at least one good nandroid on external media. Sooner or later you will format your data partition and if you're like me, you may forget to backup your nandroids in the heat of the moment..
Installing a custom ROM
From here on out it's as easy as downloading the installation file of your custom ROM, booting into TWRP, choosing "Install" and navigating to the zip of the ROM you want to flash.
If you see a "signed" in the zip file name (best_rom_ever_signed.zip), make sure you check "verify zip signature" under the "Install" menu. Some devs sign their ROM zips - a better way to ensure file integrity than md5 sum.
Whatever you decide to flash: READ THE OP of the corresponding thread and make sure you have the correct bootloader and the required recovery installed! I can't stress this enough! If you are not sure, DO NOT FLASH!
Look for the ROMs in the Development section of the XDA forum for this tablet: http://forum.xda-developers.com/transformer-tf300t/development
It is mandatory to do a Factory Wipe in TWRP before installing a custom ROM or going from one ROM base to another (a so called clean install).
If you choose 'Wipe' in TWRP, all you have to do is swipe the button - 'Factory Wipe' is the default selection under the 'Wipe' menu. You will loose your apps, but it will not wipe your /data/media/ folder where your files, pictures, etc live.
If you do this right before flashing the custom ROM, make sure you have the zip file of your custom ROM on your microSD - not on your internal SD where it may get wiped....
Once you installed a custom recovery NEVER EVER UNDER ANY CIRCUMSTANCES - AND I REPEAT: NEVER! - use the 'Wipe Data' option from the bootloader menu or the "Factory Reset" option in Settings > Backup&Restore.
In your custom recovery you have the option to wipe, backup and restore every partition on your tablet selectively or collectively. Any wiping, any backup and any restore of the system, data, recovery or boot partitions MUST be done in your recovery (or in fastboot)!
You can safely use Titanium Backup or Asus Backup for apps and settings, but that's it. For everything else use your recovery.
FREE ADVICE
There are alternative methods to flash a recovery to your device using apps like GooManager (currently not supported anyway), TWRP Manager or Flashify from the Play Store which do it right from your tablet. These apps "save you the trouble" of getting ADB and fastboot set up and working on your PC. These methods still exist and they do work - mostly - and if you have root. But I would not recommend them.
If you are not willing to invest the time to learn the basics about ADB and fastboot (google "adb fastboot xda tutorial") and install the necessary drivers on your PC, you should not be flashing anything to your tablet!
GET ADB AND FASTBOOT WORKING!
Sooner or later you will do something stupid (I have done it and so will you) and ADB/fastboot may save your bacon IF you had it working when you didn't really need it.
Hit the 'Thanks' button and rate the thread 5 stars if this helped you
Click to expand...
Click to collapse
Save it for later
Mine
sbdags said:
@stamatis could we sticky this please.
Brilliant post Bernd :good:
Click to expand...
Click to collapse
Can we make that happen here to @stamatis
Thx Josh
Nice one Bernd! :good::good:
boot sequence
Hi,
Is normal to see three TUX and some phrases at the power on ?
Can I hide it ?
tnkx
Nicola
You mean the penguins?
That's normal I'd you're running a Rom that uses _that's preinit scripts. You can't hide them - why would you?
thank you SO much
I love you!
Wow, I've never had so much trouble rooting a device before! And days ago, I rooted my T700 without any problems. So, I guess I should have expected the hubby's TF300T to be problematic! Recoveries didn't work, I tried multiple ones. Eventually, I had a recovery that didn't recognize any partitions. I used fastboot to erase them all and put the stock ROM back on--wouldn't boot up. This thread was an immense help! I've moved the other recoveries and ROMs into my non-working folder!
Thanks again!
Lynne
Awesome
What a well written guide! I have a decent understanding of fastboot and adb (although minimal experience), and I perfectly understood every step.
My advice to all newbies like me.... Read stuff ALL of the way through (and understand it), BEFORE stepping off in it.
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
scuzzo said:
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
Click to expand...
Click to collapse
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
lj50036 said:
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
Click to expand...
Click to collapse
hello,
bootloader is unlocked or at least it says it is at the boot screen.. "your device is unlocked"..
real time... just swapped ports... its says it pushed the recovery.... so... will continue along this path.... and see how it goes.... i think its good to go... just as you suggested... port swap... cool... i bought this just so i could root it and put the kit kat kis rom on it.... thanks for your help and big ups to OP.... great guide ...
thanks again.!
Nice guide!
I've been wanting to put a custom rom on my transformer for a long time. This guide worked like a charm.
The only problem I had was when I tried to flash TWRP recovery, but switching USB port fixed that problem.
I flashed the latest CM12.1 nightly and it works fine.
Many thanks!
Help please, I'm stuck!
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
You won't see anything on the tablet screen, but what does the command window say?
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
berndblb said:
You won't see anything on the tablet screen, but what does the command window say?
The command window didn't say anything, just blinking cursor after my command line
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Mishka79 said:
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
Click to expand...
Click to collapse
Thanks,
After writing the question, I've restarted my tablet and did all the steps again.
The second time everything worked as it should. :good:
thanks for your great guide
Really great guide
Amazing guide thanks for the help
Thank you for this good tutorial but I have one question.
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
ANDROIDYER said:
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
Click to expand...
Click to collapse
I have not used CM in quite a while but I think you have to enable root in Developer Options. I think it is not enabled by default.
If hat does not work you can go to Chainfire's website and download the flashable SuperSU and just flash it in recovery
Thanks and a couple of notes on TF300T
Thanks so much for the great guide. My 300TF was nearly bricked due to slowness and freeze-ups. I'd stopped using it. The process worked and am now running KatKiss. Couple of problems and their solutions for anyone who may have the 300TF:
-When trying to "Unlock Bootloader" I kept getting to "enter Google password" but when I did so (correctly) it was not accepted. The solution was to do another factory reset and NOT install google services. Didn't ask for password after that.
-Used fastboot command line to install "twrp.blob" but nothing happened and it timed out. I had to take out other usb connect programs first (in my case "easy-tether" and my LG phone connect app.) After that everything went as per your guide.
Thanks again
Geneg
Hello!
I have the Nexus 6P and I have successfully rooted 16 phones over the past 4 years and never had a problem I couldn't fix. Today I made a mess of my new phone.
I had a perfectly working custom ROM with an unlocked boot loader with TWRP (2.8.7.2) installed. I installed some custom soft keys and got into a boot loop. I went and flashed what I thought was the stock ROM according to the website I was following, and I re locked my boot loader like a fool and was going to eventually unlock it.... turns out I was still boot looped.
I have tried:
sideloading 3 different zips, always get the message "cannot read zip" whatever the zip is
I tried changing the names, doing the full names, doing a stock rooted zipped ROM, nothing works.
I have used SkipSoft and Wugs toolkit and I can't flash ANYTHING or transfer files onto the phone unless the bootloader is unlocked.
I have installed the Google drivers multiple times, ADB devices always works, it seems to not be a driver issue because I can do everything else fine.
I have let the phone sit for 35 minutes in bootloop waiting for it to come back online so I can tick that "OEM unlock" button in the settings menu.
I have also done a dozen other things, the problem is nothing I have done or tried allows me to get any ROM or any file onto the device to flash in TWRP.
Help?
ok shot in the dark here. I had a boot loop until I flashed the flashable vendors zip
I got it in this thread:
http://forum.xda-developers.com/nexus-6p/development/rom-pure-nexus-layers-fi-wifi-calling-t3244563
Give it a whirl if you haven't already.
Found this in the Pure Nexus Project thread, so props to them for providing this.
-MotoNexus- said:
Hello!
I have the Nexus 6P and I have successfully rooted 16 phones over the past 4 years and never had a problem I couldn't fix. Today I made a mess of my new phone.
I had a perfectly working custom ROM with an unlocked boot loader with TWRP (2.8.7.2) installed. I installed some custom soft keys and got into a boot loop. I went and flashed what I thought was the stock ROM according to the website I was following, and I re locked my boot loader like a fool and was going to eventually unlock it.... turns out I was still boot looped.
I have tried:
sideloading 3 different zips, always get the message "cannot read zip" whatever the zip is
I tried changing the names, doing the full names, doing a stock rooted zipped ROM, nothing works.
I have used SkipSoft and Wugs toolkit and I can't flash ANYTHING or transfer files onto the phone unless the bootloader is unlocked.
I have installed the Google drivers multiple times, ADB devices always works, it seems to not be a driver issue because I can do everything else fine.
I have let the phone sit for 35 minutes in bootloop waiting for it to come back online so I can tick that "OEM unlock" button in the settings menu.
I have also done a dozen other things, the problem is nothing I have done or tried allows me to get any ROM or any file onto the device to flash in TWRP.
Help?
Click to expand...
Click to collapse
Thanks, the problem is I can't find a way to sideload anything or move a file over. Everything results in a myriad of errors.
tigercranestyle said:
at worst, you would have to invoke the flash-all command via adb once you extracted the couple of times that you have to. directions are on google's factory image site.
may not be the answer that you were looking for, but it always feels great having a clean device to work with. i mean as it stands, you would have to set everything back up on whatever rom anyway if you somehow got out of the problems you were having. you would spend more time doing that instead of just going the factory image route.
toolkits are fun, but learning your way around them is even more so.
Click to expand...
Click to collapse
I'm gonna check the flash all,I've never done that before. I think that would be all the images in the tgz factory image? Anything to get my phone back yeah, I just need it working again.
-UPDATE- I tried the flash all batch in the system image and I tried the flash all batch command and neither work.
Hey man - crazy story - I literally just got done messing with a toolkit and the EXACT same situation happened to me. Locked bootloader, bootloop, everything. What you need to do is do a complete wipe of everything in TWRP so you can access /data from your PC (unless it isn't messed up currently, and you can decrypt within TWRP, I couldn't...) Then, download Cataclysm (maybe something else will work, idk, but I just did it with cataclysm) and bam - it boots, head to developer options and get the box checked.
Stock images didn't work, nothing did... was scared I had a brick. The saving grace for us is that we both got TWRP installed. No more toolkits for me!
Melamunna said:
Hey man - crazy story - I literally just got done messing with a toolkit and the EXACT same situation happened to me. Locked bootloader, bootloop, everything. What you need to do is do a complete wipe of everything in TWRP so you can access /data from your PC (unless it isn't messed up currently, and you can decrypt within TWRP, I couldn't...) Then, download Cataclysm (maybe something else will work, idk, but I just did it with cataclysm) and bam - it boots, head to developer options and get the box checked.
Stock images didn't work, nothing did... was scared I had a brick. The saving grace for us is that we both got TWRP installed. No more toolkits for me!
Click to expand...
Click to collapse
I have already done the advance wipe and the format data, I just tried again and my computer will not read it as storage with MTP enabled.
Thanks though!
tigercranestyle said:
after extracting the tgz file, it should become a tar file. after extracting that tar file, it should become the six files listed below. these files should be in platform-tools to start from scratch.
bootloader-angler-angler-02.45.img
flash-all.bat
flash-all.sh
flash-base.sh
image-angler-mmb29m.zip
radio-angler-angler-02.50.img
once they are, open command line in that directory (platform-tools) and then "flash-all" should work. if it doesn't make sure you post the error that you're getting on your computer so that others can help.
Click to expand...
Click to collapse
I followed all these steps, I unzipped it and everything and put it in my fastboot folder. I still get the "unknown partition "all" " orrr flash is not recognized as an internal or external command, operable program or batch file. In an attempt with desperation I tried opening every version of the batch file, in the tgz and tar and unzipped AND in the fastboot and it all gives the radio img error.
I still do have my fastboot device connected, to my knowledge that means it can't be a driver problem right?
-MotoNexus- said:
I followed all these steps, I unzipped it and everything and put it in my fastboot folder. I still get the "unknown partition "all" " orrr flash is not recognized as an internal or external command, operable program or batch file. In an attempt with desperation I tried opening every version of the batch file, in the tgz and tar and unzipped AND in the fastboot and it all gives the radio img error.
I still do have my fastboot device connected, to my knowledge that means it can't be a driver problem right?
Click to expand...
Click to collapse
You can't flash anything in fastboot with a locked bootloader. The only way you can get your device to work is by using TWRP to flash a rom.
The flash all command doesn't work because the extracted tar file has A zipped folder inside that has to be extracted also with radio and I think recovery zipped up. You have to extract those two files to put them in the tar file and then you might be able to flash all. But as long as you can fastboot devices you should be able to flash all 6 files and have a brand new device.
tigercranestyle said:
sorry for the late reply. not always here.
1. did you unlock the bootloader again before doing all of this?
2. list the files that are in your platform-tools folder.
3. when you executed the "flash-all" command earlier, you did do it with the dash in between flash and all... right? also, you're doing it without the quotation marks, right?
sorry if they seem silly. just never really know.
Click to expand...
Click to collapse
He can't unlock the bootloader without booting into a rom. He needs to use twrp to flash a full system but I am not sure how to help with that when he can't sideload.
just an unrelated question... why did you lock the bootloader again? what was the purpose?
also, as mentioned... locked bootlader, odds arre USB debugging and OEM unlock are also not checked.... afaik, youre in trouble... hopefully someone else can sav you, im out of ideas
akellar said:
You can't flash anything in fastboot with a locked bootloader. The only way you can get your device to work is by using TWRP to flash a rom.
Click to expand...
Click to collapse
Are you telling me that I'm bricked?
I have no way of transfering files to the devices, it won't read as anything to transfer files and ADB won't sideload anything.
tigercranestyle said:
sorry for the late reply. not always here.
1. did you unlock the bootloader again before doing all of this?
2. list the files that are in your platform-tools folder.
3. when you executed the "flash-all" command earlier, you did do it with the dash in between flash and all... right? also, you're doing it without the quotation marks, right?
sorry if they seem silly. just never really know.
Click to expand...
Click to collapse
Neither am I , I just got back from a trip. I have the fastboot exe adb exe mfastboot exe the ADB api files, and the ROMs I tried to sideload along with all the images I pushed to the device.
Originally I had the bootloader unlocked, like I said I was being a fool blindly following a tutorial to get back to stock and I locked it too soon.
Yeah, I tried flash-all flash all and flash flash-all / flash flash all
dontbeweakvato said:
The flash all command doesn't work because the extracted tar file has A zipped folder inside that has to be extracted also with radio and I think recovery zipped up. You have to extract those two files to put them in the tar file and then you might be able to flash all. But as long as you can fastboot devices you should be able to flash all 6 files and have a brand new device.
Click to expand...
Click to collapse
Okay I unzipped that folder and put all the files in the fastboot folder, I still get the same error. The thing that scares me here is I can use the batch file now and it just gives me an error saying it can't flash because it's bootloader is locked.
Soulfly3 said:
just an unrelated question... why did you lock the bootloader again? what was the purpose?
also, as mentioned... locked bootlader, odds arre USB debugging and OEM unlock are also not checked.... afaik, youre in trouble... hopefully someone else can sav you, im out of ideas
Click to expand...
Click to collapse
They are default unchecked, hence the reason I can't unlock the bootloader again. I said it in my first post, I was being a fool following some guide to get back to stock and ******* up a step.
rift999 said:
He can't unlock the bootloader without booting into a rom. He needs to use twrp to flash a full system but I am not sure how to help with that when he can't sideload.
Click to expand...
Click to collapse
Is there not a way to fix the sideload? Or a way to get my computer to read it as a media devices so I can transfer files or something? It's always worked with previous phones but my computer reads the 6P differently. (even when it was working)
Stop trying to fastboot flash anything, it will not work as I've already started multiple times. The only option you have is to get something moved to storage and flash it from twrp.
akellar said:
Stop trying to fastboot flash anything, it will not work as I've already started multiple times. The only option you have is to get something moved to storage and flash it from twrp.
Click to expand...
Click to collapse
I've tried every driver from Google and Nexus 6P, I can't get it to read the MTP for a file transfer, what would you suggest I do? it doesn't show up as my old phones used to in the computers drives.
I have found 0 success with getting a file on through file transfer or ADB push file.
-MotoNexus- said:
I've tried every driver from Google and Nexus 6P, I can't get it to read the MTP for a file transfer, what would you suggest I do? it doesn't show up as my old phones used to in the computers drives.
I have found 0 success with getting a file on through file transfer or ADB push file.
Click to expand...
Click to collapse
Can't help too much personally, but you might give this a shot:
http://forum.xda-developers.com/showpost.php?p=64317181&postcount=20
Sent from my Nexus 6P using XDA Free mobile app
So I just got it............!!!!! I have spent a total of 16 hours with videos, forums and trial and error. When I was going back the 5th around time messing with drivers I turned my ADB driver into a USB composite because I had no idea I could and instantly I was able to file transfer!!!! Problem solved, I have my ROM on now.
Thank you all for your help! I am so sorry I derped at this, I have been doing this a long time and just got sloppy.
Edit:
[Procedure] http://forum.xda-developers.com/showpost.php?p=64841837&postcount=27
Edit/
I am creating this thread dedicated for me and other beginners "noobs".
Where should I begin as a beginner?
I am looking to unlock and root with latest MM that motorola supplies.
Things you should know about me:
I have no idea how to use adb.
I have no idea how to unlock & root or even if I should but I don't like ads.
I have no idea which firmware to use.
http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
I am completely lost.
I have not gotten my phone yet, I ordered it this morning and will be here Friday. I am just trying to compile sources and info.
Thanks a bunch guys, I really need help with this.
One piece of advice for starters just since you used the word noob. Never mod your phone on a low battery. You can mess a phone up enough to break offline charging, and without a removable battery that you can swap out or charge in a cradle that could get awkward in a hurry on this phone. I always make sure I'm >75% just in case. You can fastboot your way out of all kinds of trouble; but not if your battery is dead and your phone is so screwed up it is not offline charging.
Your phone will probably show up with Android 5.1.1 installed, at least I got mine about 3 weeks ago and it did. Once it is through initial setup it should want to apply an OTA to Android 6.0 right away; if not check for it in Settings -> About -> System updates and it should find one. Just let it update before you do any setup or app downloading.
Once you're on MM, before you do any setup you have to unlock your bootloader if you intend to root. You'll get all the warnings about voiding warranty and here there be dragons, so be prepared for that. Also, unlocking the bootloader will wipe your internal storage, so don't bother with any setup or app downloading before you do it.
Start with Heisenberg's thread. It is a great guide on how to setup your computer for adb and fastboot as well as all the syntax you need for unlocking the bootloader and installing a custom recovery. Make sure to get the 2.8.7.1 version of TWRP that is patched to work with the MM bootloader.
When you boot to TWRP recovery for the first time it will ask if you want to keep system read only. Keep system read only and make a backup immediately. I usually make one backup of boot, system, and data, and a separate one of just efs; don't worry if you don't understand, you'll figure it out when you get there. TWRP is all touch based and pretty intuitive. This way you have good, untouched system backup to fall back on just in case.
When it comes to rooting MM, don't use the old system install method. Flash a SuperSU from this experimental systemless root thread (I used this instead of the ivcarlos method linked to the Heisenberg thread because it is more automated and easier). I can vouch for the 2.62-20151210170034 version of SuperSU. I've used it to root stock MM on this phone 3 or 4x as I've restored backups and changed kernels. I've heard the 2.64 and above SuperSU versions are not working with this phone on MM, and the older traditional system root methods like the v2.49 version that is linked to the Heisenberg thread are causing bootloops on MM. Don't panic on first boot after the systemless root; it appears to bootloop once but comes up normally the second time.
One other thing, TWRP doesn't seem to be able to detect the systemless rooting method, and it really wants your phone to be rooted. If/when TWRP offers to automatically install SuperSU, don't let it - ever - it will keep asking. It must use the old method that causes bootloops on MM, not the new systemless method linked above.
Once you're all rooted and settled in, if you get sick of the unlocked bootloader warning you can fix it by reading up in this thread. Just be sure to read carefully and get the MM logo and not the LP logo.
Wow, thank you so much for the long type up.
Duly noted and this is a great start. May I continue here if I run into any problems?
I think ima have fun with this phone
I am into tinkering with devices, "sometimes linux" etc, like my PC OS win7x64 is modified big time, so I probably will catch on with unlocking rooting etc very quickly.
I got chillz and cannot wait!
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Hitti2 said:
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Click to expand...
Click to collapse
Good luck :good:
I just noticed one thing that might not be entirely clear in the Heisenberg thread. It says to enable adb in the Settings -> Developer Options menu, but by default you won't have a Developer Options menu.
To get one, go into Settings -> About Phone, scroll all the way to the bottom, and tap on build number about 8 or 10 times. Your phone will say something to the effect of congratulations now you're a developer, and you'll have the menu.
Edit: i just noticed it says how to enable developer options further down the page
ty, I will need it lol.
Dev options were on my S5 too. My pops showed me how to on the S5, kinda hoping it was the same way to enable them, turned out to be. Cool.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
^^^This^^^
and remember what XDA is really for ...http://forum.xda-developers.com/showpost.php?p=2031989
with that, enjoy all the reading, and do not be afraid to look at other sites too, there are even videos around that can help guide you...
and there are fellow members here to help...but most questions have already been asked and answered, so search first! Cheers! :highfive:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
1) Be sure to get the newest TWRP that has been patched for M.
Click to expand...
Click to collapse
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Hitti2 said:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Click to expand...
Click to collapse
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
[Q] Where should I begin as a beginner?
At the beginning, of course.
Sorry couldn't resist...
Naddict said:
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
Click to expand...
Click to collapse
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Hitti2 said:
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Click to expand...
Click to collapse
after you unlock and install custom recovery, you use TWRP (the custom recovery) to create the backup...
as you are on MM, you cannot use the "all in one" application that I provided in the link...so you will have to manually install/flash your rom
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Hitti2 said:
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Click to expand...
Click to collapse
Clearly you are impatient (not trying to be rude here), - XDA truly is not a place to pay for someone to do it for you, XDA is about learning and development, there are several places that a search will get you what you need. Many members have also posted links above to vast amount of information (specifically this post and this entire thread here http://forum.xda-developers.com/showpost.php?p=64183396&postcount=151 and here too http://forum.xda-developers.com/showpost.php?p=64311581&postcount=171) that you should take time to read and then, as you move through these things then you ask questions.
Offering to pay to have someone do it for you is really not what this site is about.
Read, do google searches...it has been done a hundred time already mate, take the time to learn what it is you are doing before actually doing it.
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Hitti2 said:
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2031989
Hitti2 said:
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Click to expand...
Click to collapse
Looks to me like several folks in there offered suggestions on how to successfully get root ...and again, as my last helpful post here...you really need to read Heisenberg's thread, that guide works, and from what I can tell, you have to use systemless root.
Ok, I will follow
Intro
This thread will serve as a location for basic how-to guides for the Moto X Pure. I'm going to start off with a couple of the more obvious ones and go from there. If anyone has any suggestions for additions please feel free to let me know.
Prerequisites:
You'll need a working adb/fastboot environment on your PC to get through some of these guides. Go here to download the Android SDK, which will give you most updated version of adb and fastboot. Scroll to the bottom of the page and find Other Download Options>SDK Tools Only, and grab the right version for your OS. While it's downloading create a folder in C:\ called SDK (C:\SDK). Once you've downloaded the zip you can extract it into your C:\SDK folder. Navigate to C:\SDK\android-sdk-windows and open SDK Manager.exe. In SDK Manager you need to install the following packages:
Tools> Android SDK Tools, Android SDK Platform-tools
Extras> Android Support Library
Once you have installed those, inside C:\SDK you should see some new folders, one of them will be called platform-tools, within that folder you should see fastboot.exe and adb.exe. I'll refer to this as your fastboot folder/directory or working folder/directory during this guide. To make sure adb is correctly installed, open a command prompt from within your fastboot folder (hold shift + right click, select open command prompt here) and issue this command:
Code:
adb version
If it returns a version number for Android Debug Bridge then you're good to go.
You'll find Motorla drivers here, download it and install, then reboot your PC.
You can test adb by connecting your device to your PC while booted into Android (making sure that adb/usb debugging is enabled in Settings>Developer Options) with the screen unlocked and issuing this command:
Code:
adb devices
It should return your device serial number, if so, adb is working.
You can test fastboot by connecting your device to your PC while booted into fastboot mode (power + volume down) and issuing this command:
Code:
fastboot devices
It should return your device serial number, if so, fastboot is working.
By attempting any of the processes listed this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches on fire, or turns into a hipster and claims to have been modified before it was cool.
Index
How To Unlock Your Bootloader
How To Install A Custom Recovery On Your Device
How To Make A Nandroid Backup With TWRP Recovery
How To Root Your Stock Rom
How To Install A ROM with TWRP Recovery
How To Install A Custom Kernel With TWRP Recovery
How To Make Sure You Can Pretty Much Always Recover From An Accidentally Wiped System
1. How To Unlock Your Bootloader
Go into About Phone in Settings, click on Build Number 7 or 8 times until it says you have enabled Developer Options. Go back to Settings and enter the newly opened Developer Options section, scroll and click on the Enable OEM Unlock option.
Power off your phone then boot into fastboot mode (power + volume down).
Connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here).
Check your fastboot connection by issuing this command:
Code:
fastboot devices
It should return your device serial number, if not you need to make sure your drivers are installed correctly.
Once you've confirmed your fastboot connection issue this command:
Code:
fastboot oem get_unlock_data
It should return something like this:
Code:
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
Copy that code (with no spaces between the characters) and paste it somewhere for safekeeping, you'll use it in a minute.
Go to the Motorola bootloader unlocking page. You'll need to create an account with Motorola if you don't already have one. Once you're signed in you can scroll down to step 6 and paste the above code into the text field and hit the “can my device be unlocked” button.
Read the terms and conditions and accept them if you agree (you can't continue unless you accept).
Click the “request unlock key” button and an email with your unlock token will be sent to the email account that you signed up with.
Once you have retrieved the token from the email you can use it within the following command to unlock your bootloader:
Code:
fastboot oem unlock xxxxxxxxxx
(Replace the xxxxxxxx with your unique unlock token)
Your bootloader is now unlocked!
Reboot with this command:
Code:
fastboot reboot
It's now safe to disconnect your usb cable.
Please note: this will erase all user data from your device, it is best to do this before you really start using the device and installing apps or putting data on the internal storage
2. How To Install A Custom Recovery On Your Device
Prerequisites: unlocked bootloader.
Download the recovery of your choice, here's TWRP.
Make sure you check the md5 to verify its integrity (where possible).
Place the file in your fastboot folder (this is where fastboot.exe is located on your PC).
Put the phone in fastboot mode and connect it to your PC via usb cable.
Open a command prompt from within your fastboot folder (shift + right click, select open command prompt here), and enter the following commands:
Code:
fastboot flash recovery <filename>.img
(Replace <filename> with the actual filename of the recovery, the recovery filename in the command will change depending on which recovery you're flashing)
Wait for the recovery to flash, it'll only take a few seconds, you'll get a finished message in your command prompt window once it's done.
It's now safe to disconnect your usb cable.
Don't reboot the phone normally, use the volume buttons to highlight recovery and press the power button to select it. This will stop the stock OS from patching it with the stock recovery in boot. Once you've booted into TWRP like this once, you can reboot normally.
3. How To Make A Nandroid Backup With TWRP Recovery
Prerequisites: unlocked bootloader, TWRP recovery.
A nandroid backup is a very important thing to have before installing any custom software on your device. It's basically a backup of your stock system that you can fall back on if anything goes wrong or if you just want your stock ROM back. You can also use the backup tool to create a backup of your favourite ROM set up exactly the way you like it. The backup you create can be easily restored using the restore tool in TWRP recovery.
All you need to do is enter TWRP recovery, select the backup option from the TWRP home screen, check the system/data/boot boxes, and swipe to backup. The process will take a few minutes.
Click to expand...
Click to collapse
& I will follow
Hello guys!
I make my own ROOT (systemless, thanks for Chainfire) images for Moto X Style with Marshmallow (build MPH24.49-18). Its use "experimental" systemless SuperSU version 2.56 - more info on http://forum.xda-developers.com/show...35&postcount=2. No need replace bootloader or recovery. Still need unlocked booloader.
Because TWRP didn't work in this version of bootloader (0xA048), I cooked "su.img" in a Linux box and used "/data/local/tmp" as bridge (accessible by ADB).
WARNING! I am not responsible for any harm on your phone. When you're not sure if you can do it, leave it!
For use, you need
1) unlocked bootloader.
2) if your bootloader not unlocked, make sure you have copy of your data, because this process will erase your device.
3) install ADB and FASTBOOT on your pc using minimal ADB or Android SDK.
4) install ADB drivers from Motorola or Universal ADB.
5) download provided files.
6) download SuperSU ver. 2.56 from http://forum.xda-developers.com/apps...ellow-t3219344.
Steps:
1) extract files in a folder of your choice (su.img, boot.img).
2) extract Superuser.apk from SuperSU-v2.56-20151030013730.zip from common folder.
3) enable USB debugging on Android.
4) connect your device on pc.
5) open a command prompt in a new folder.
6) type "adb push su.img /data/local/tmp" without quotes.
7) type "adb install Superuser.apk" without quotes.
8) now reboot your device into fastboot mode by typing "adb reboot bootloader".
9) type "fastboot flash boot boot.img" without quotes.
10) type "fastboot reboot" without quotes.
And enjoy!
Now you have a rooted MotoX Style Marshmallow. To apply any OTAs, you only need reflash stock boot.
Click to expand...
Click to collapse
I still think its going to brick but uhwell.
So far so good, I've got it unlocked.
I apologize for my ignorance. I am gonna take it a step at a time.
Doing step one "unlocking" was scary but it went good.
Wish me luck!
A friend of mine rooted my phone for me a while back. He's no longer around and I'm still pretty unfamiliar with the process without using twrp. I'm not sure what method he used. I was going to try flashing a stock os via adb but adb doesn't detect my phone. I'm sure it's a driver issue but I can't seem to fix the problem. I also have trouble transferring files with a USB cable. My computer sees the phone but as far as opening it to explore or transfer files, it doesn't work. I downloaded drivers from a link I saw in another thread on xda and installed some file with a weird format and that didn't fix the problem.
Can somebody please point me in the right direction?
First of all, I'd suggest you to try with a different cable. The one shipped with the RP2 is optimized for power and might cause issues when using it for data trasfer.
Secondly, generally speaking you should install adb platform tools (I don't remember installing specific drivers for the adb, to be honest). You probably want to install the google usb driver as well for the fastboot as well.
If you confirm that those solution do not provide a solution to you, we might look at other causes.
Once everything is workin, you can proceed to update (since you have root permissions, I am assuming you see the OTA but you don't know how to proceed). The procedure that I followed is this:
1. Download razer factory images for mr1
1. perform a nand backup with TWRP
3. extract the factory images somewhere, open the "flash_all.bat/.sh":
3.1. make the fastboot variable point to the actual fastboot executable (if you are not familiar with relative paths, use full path and it will work seamlessly)
3.2 remove/comment the line
Code:
fastboot erase userdata
4. run the script
5. reboot your phone and perform the OTA update
6. install arter12 kernel
7. In magisk installer download the zip and flash it with TWRP
So I've been troubleshooting for the past few hours. I'm familiar with the process that needs to be done. The issue I'm running into now is a driver issue. I deleted the Google driver and installed a Samsung driver just for laughs. I can view my phone and transfer files now flawlessly. But it still isn't detected by adb. I was just going to wipe my phone and reflash the stock rom with adb fastboot. I wonder if there's a way to flash the stock rom with the Razer bootloader until I figure out what's going on with adb?
The google drivers are for fastboot (bootloader), not adb. For adb I just let windows do the automatic install (I'm sorry, I just assumed you are using windows, tell me if that is not the case).
Keeping the assumption that you are using windows, try to uninstall all driver (both from installed apps and from installed driver. For the second step you will need to show in device manager, all hidden devices and uninstall all of them).
Reboot windows and reconnect phone, I'd expect it to be automatically recognized as Razer Phone 2.
As per bootloader, in W10 sometimes it's a pain in the ass installing the drivers as you might need to manually install them.