Hi everyone,
I'm having a problem with my G1.
Each time i try to turn the Wi-Fi on, i follow this steps (spoil !!) :
- Settings -> Wireless controls -> and the i click on Wi-Fi,
wich changes the lower text to "Turning on..."
Ok, but this step take something like 1 minute and after all this time, i can read : "Unable to stop Wi-Fi" (or sometimes "Unable to start Wi-Fi"),
I got this problem 5 days ago, and this is really a pain in the arse, because the only way i can download applications is using Wi-Fi (I'm french) and i can't !
I have tried everything :
- Turn Off/On G1
- Remove/Replace battery
- Reset to factory data
- Back to RC29 (thx to you )
- Root my G1 with JF1.41 mod (Thx so much !!)
But the problem is still there,
And i can't get it back to T-Mobile, because i bought it on eBay and i live in France...
So... can anybody help ?
Thx
Hi,
Same problem here. Edit: It does this 4 times on 5. And even if if finally starts, it hangs some time after.
Additionally I've googled (almost) all night long to find some clues but nothing concrete
First, an issue is open here: http://code.google.com/p/android/issues/detail?id=1124
I get this line in logcat:
Code:
D/wlan_loader( 574): ConfigMge start rc = -1
that shows a problem. Normally it should be "rc = 0".
I've digged into the code but it is very complicated (state machine, etc...) so I could not figure where the problem resides.
I also have this in dmesg:
Code:
<4>[ 1425.145012] mmc0: card claims to support voltages below the defined range. These will be ignored.
<4>[ 1425.145867] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
I don't know if this means a hardware problem.
I also suspect a bug in the proprietary file "/system/etc/wifi/Fw1251r1c.bin" but I've not found any other version on the net, even in "not so clean ways".
The size of the file on my G1 is 194188 bytes.
I have installed RC33 ADP1 by Jesus Freke but it did not solved the problem.
Can anyone look at the size of this file on his G1 and tell me if it is different? And if it is the case possibly send it to me?
The only solution I've seen on the net is to send back the phone to T-Mobile for a replacement but unfortunately I live in France and I got it from US by unusual ways so it is not a possibility for me .
Any clue / advice will be gladly accepted
Thanks in advance.
Mid'.
I have the same problem...
I was wondering if either of you figured out what to do to get around this. I'm in the US and am having the same problem. I was also working for about a week before this behavior started ("Unable to start Wi-Fi", "Unable to stop Wi-Fi").
I have seen other posts where this is intermittent. It isn't with me. Once it quit working, I haven't been able to get anything but the error messages.
If someone has found a way around this, I would appreciate any help you can provide.
Regards
Steve
You three should post what third party apps you have installed.
I am having this same issue after flashing the new google ION R2
I'm also having this issue after flashing Ion.
Same Issue
I started having this issue before the Ion rom. It wasn't intermittent, just stopped working.
Same problem here
Code:
<4>[ 1425.145012] mmc0: card claims to support voltages below the defined range. These will be ignored.
<4>[ 1425.145867] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
CRB43, factory reset, nothing works.
Does anybody have an idea on how to solve this? It seems to be a known problem bij T-Mobile.
I'm running JF1.51 and WiFi is horribly flaky. It will work great for a few seconds then go deaf.
If I toggle it off and on it will work for a little bit again.
EDIT: I'm also getting the "low voltage" error message.
I've looked at this a little bit, and it looks like a ring buffer problem.
As I said before, my WiFi will work great for a while then go deaf.
Disabling/enabling through the Settings GUI will restore operation for a couple of minutes, tops.
Here's what I think might be relevant dmesgs:
Code:
<6>[88157.446136] request_suspend_state: sleep (0->3) at 88153591964926 (2009-06-27 20:57:10.146884034 UTC)
<4>[88157.467956] deinit sharp panel
<4>[88157.996398] select 4913 (app_process), adj 15, size 3053, to kill
<4>[88157.996734] send sigkill to 4913 (app_process), adj 15, size 3053
<4>[88158.236358] save exit: isCheckpointed 1
<6>[88282.505401] request_suspend_state: wakeup (3->0) at 88278651260580 (2009-06-27 20:59:15.206149170 UTC)
<6>[88282.615966] rev_crc_err_count 1, INT 23a001
<6>[88282.616332] rev: unknown reverse packet: len=0009 type=0049 CURR_REV_PTR=1617500b
<6>[88282.616851]
<6>[88282.617126] 09<6> 00<6> 49<6> 00<6> 00<6> 80<6> 00<6> 60<6> 00<6> 80<6> 0a<6>
<6>[88282.620574] mddi: resetting rev ptr
<6>[88282.621154] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val e curr_rev_ptr 1617500b
<4>[88282.666717] init sharp panel
<4>[88287.779876] select 4943 (app_process), adj 15, size 2991, to kill
<4>[88287.780731] send sigkill to 4943 (app_process), adj 15, size 2991
<4>[88295.748840] select 4951 (app_process), adj 15, size 2992, to kill
<4>[88295.749694] send sigkill to 4951 (app_process), adj 15, size 2992
<6>[88298.065185] TIWLAN: Driver unloading
<4>[88298.066314] sdio_reset_comm():
<7>[88298.154388] TIWLAN: Releasing SDIO resources
<7>[88298.158172] TIWLAN: SDIO resources released
<4>[88298.160217] wifi_remove
<4>[88298.160552] trout_wifi_set_carddetect: 0
<7>[88298.160827] mmc0: card_present 0
<6>[88298.161346] mmc0: Slot status change detected (1 -> 0)
<4>[88298.161712] trout_wifi_reset: 1
<6>[88298.172302] mmc0: card 0002 removed
<4>[88298.233215] trout_wifi_power: 0
<6>[88298.996520] TIWLAN: Driver unloaded
Here's a little more that I'm getting when the WiFi stops. Is this driver OSS or a proprietary blob?
Code:
<3>[ 1097.459899] init: untracked pid 364 exited
<4>[ 1101.746643] wds: 0020 @ 01
<6>[ 1101.747192] qmi: wds: got handle 0x17aaafb0
<4>[ 1101.747711] wds: 0022 @ ff
<6>[ 1101.748168] qmi: wds: CONNECTED
<4>[ 1101.750244] wds: 002d @ 01
<4>[ 1101.750701] qmi: got network profile
<6>[ 1101.752502] rmnet_open()
<6>[ 1685.105285] request_suspend_state: wakeup (3->0) at 1679298966064 (2009-06-27 21:55:33.740494873 UTC)
<6>[ 1685.217498] rev_crc_err_count 1, INT 23a001
<6>[ 1685.218078] rev: unknown reverse packet: len=0009 type=0049 CURR_REV_PTR=1617500b
<6>[ 1685.218383]
<6>[ 1685.218658] 09<6> 00<6> 49<6> 00<6> 00<6> 80<6> 00<6> 60<6> 00<6> 80<6> 0a<6>
<6>[ 1685.222137] mddi: resetting rev ptr
<6>[ 1685.222595] mddi_remote_read: failed, sent MDDI_CMD_SEND_RTD: int 23a001, stat 808063, rtd val e curr_rev_ptr 1617500b
<4>[ 1685.288696] init sharp panel
<4>[ 1692.515502] wds: 0021 @ 01
<6>[ 1692.515838] qmi: wds: network stopped
<6>[ 1692.546508] rmnet_stop()
<4>[ 1693.342254] wds: 0022 @ ff
<6>[ 1693.342864] qmi: wds: DISCONNECTED
<6>[ 1704.187591] TIWLAN: Driver unloading
<4>[ 1704.188781] sdio_reset_comm():
<7>[ 1704.266632] TIWLAN: Releasing SDIO resources
<7>[ 1704.267944] TIWLAN: SDIO resources released
<4>[ 1704.270568] wifi_remove
<4>[ 1704.271057] trout_wifi_set_carddetect: 0
<7>[ 1704.272521] mmc0: card_present 0
<6>[ 1704.272979] mmc0: Slot status change detected (1 -> 0)
<6>[ 1704.276489] mmc0: card 0002 removed
<4>[ 1704.280487] trout_wifi_reset: 1
<4>[ 1704.332305] trout_wifi_power: 0
<6>[ 1704.543151] TIWLAN: Driver unloaded
<4>[ 1705.308166] wds: 0020 @ 01
<6>[ 1705.308715] qmi: wds: got handle 0x17aaafb0
<4>[ 1705.309234] wds: 0022 @ ff
<6>[ 1705.309661] qmi: wds: CONNECTED
<4>[ 1705.311370] wds: 002d @ 01
<4>[ 1705.311798] qmi: got network profile
<6>[ 1705.313690] rmnet_open()
<6>[ 1709.503326] TIWLAN: Driver loading
<4>[ 1709.504211] wifi_probe
<4>[ 1709.504486] trout_wifi_power: 1
<4>[ 1709.714965] trout_wifi_reset: 0
<4>[ 1709.766632] trout_wifi_set_carddetect: 1
<7>[ 1709.767303] mmc0: card_present 1
<6>[ 1709.767608] mmc0: Slot status change detected (0 -> 1)
<3>[ 1712.275085] mmc0: Command timeout
<4>[ 1712.282226] mmc0: card claims to support voltages below the defined range. These will be ignored.
<4>[ 1712.283081] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
<6>[ 1712.290405] mmc0: new SDIO card at address 0001
<6>[ 1712.296447] TIWLAN: Found SDIO controller (vendor 0x104c, device 0x9066)
<6>[ 1712.302520] TIWLAN: Driver initialized (rc 0)
<4>[ 1712.303436] TIWLAN: 1251 PG 1.2
<6>[ 1712.303863] TIWLAN: Driver loaded
<4>[ 1721.950164] wds: 0021 @ 01
<6>[ 1721.950500] qmi: wds: network stopped
<6>[ 1721.976440] rmnet_stop()
<4>[ 1726.546569] select 151 (app_process), adj 15, size 3009, to kill
<4>[ 1726.547149] select 158 (app_process), adj 15, size 3081, to kill
<4>[ 1726.547454] select 311 (app_process), adj 15, size 3246, to kill
<4>[ 1726.547973] send sigkill to 311 (app_process), adj 15, size 3246
<4>[ 1730.936798] wds: 0022 @ ff
<6>[ 1730.937652] qmi: wds: DISCONNECTED
I had the problem, i redid everything. just flashing the phone didn't help. downloaded the jf1.51 and did it again. logs would say wifi drivers not found. and guess what i checked and there were not there... I don't know 'who' or 'what' deleted them...
The only thing II suspect is the Backup program available on market for root users...or the "Privacy for rooted phones" prog
Same problem
Experiencing the same problem with my UK T-Mobile G1 (JF v1.51). Tried wiping, reseting, turning device off and on and removing battery, nothing has worked.
Is there any solution yet? I don't have any new apps installed and it is a fresh update, the problem was there prior to updating to jf v1.51
Any help will be appreciated
Did anyone manage to fix this? could it be related to the SDCard you are using?
Does everyone with non-working wifi on a G1 have this?
3 days ago, after I apply a chinese character sorting patch, i met this problem. So I wiped my phone, repartitioned my sdcard, reflashed the CM404 rom. And finnally got my wifi back.
But today I had this problem back again. I'm thinking is it because the sdcard I'm using is taking up to much battery power, so that the wifi module could not acquire enough power? This recalls me that I changed my sdcard exactly 3 days ago, right before I met this problem for the first time.
I am from India and G1 is very expensive over here. So, a friend bought me G1 from US and it reached in my hand yesterday . It is a T-Mobile G1. Was having same issue with Wifi and was showing "WiFi unable to start" . I tried rooting it and flashing with various ROM - issue remained. Lastly I downloaded a application from Market and installed. Named : WiFi Fixer by Zanshin-g1 .that software is written for completely different reason.
Code:
Does your wifi "hang" while still connected? Wifi Fixer keeps wifi working automatically, with optional wifi lock.
0.3.1 Cupcake, Disable function, warning if Wifi Notification is on
0.2.9 Added support for Landscape
*Wifi Fixer Classic also available*
But somehow it fixed my issue
Thanks Zanshin-g1.
bidhata said:
I am from India and G1 is very expensive over here. So, a friend bought me G1 from US and it reached in my hand yesterday . It is a T-Mobile G1. Was having same issue with Wifi and was showing "WiFi unable to start" . I tried rooting it and flashing with various ROM - issue remained. Lastly I downloaded a application from Market and installed. Named : WiFi Fixer by Zanshin-g1 .that software is written for completely different reason.
Code:
Does your wifi "hang" while still connected? Wifi Fixer keeps wifi working automatically, with optional wifi lock.
0.3.1 Cupcake, Disable function, warning if Wifi Notification is on
0.2.9 Added support for Landscape
*Wifi Fixer Classic also available*
But somehow it fixed my issue
Thanks Zanshin-g1.
Click to expand...
Click to collapse
Thanks Bidhata ,
but it tried that application and initially at first run it worked . but then once i got dc , the problem came back. since then i am not able to have the wifi truned on .
so the issue remains ..
Did you check the permission of this file: /data/misc/wifi/wpa_supplicant.conf
osoft said:
Did you check the permission of this file: /data/misc/wifi/wpa_supplicant.conf
Click to expand...
Click to collapse
This gave me the idea of how to fix, and its relativley simple... please correct me if I have made a grave error, but it seems to work so meh:
enter your terminal emulator and type the following:
su
(allow the request when asked)
chmod 777 /data/misc/wifi/wpa_supplicant.conf
exit the terminal
try powering up your wifi, it seems to be pretty stable as of now. This began occuring after I left my home's wireless range without turning wifi off and having the Wireless Helper app installed from the market...needless to say I have uninstalled said app and done this mod.
Whats funny about my situation is that if i use the DREAIMG.nbh file to flash back to rc29 my wifi works fine if i then upgrade to jf 1.5 still works fine upgrade to the latest cyanogen stable still works fine. Then a couple of days later poof "Unable to start wifi" intermittently and then a few days later permanently. Even if i downgrade to jf again still no wifi until i re-flash rc29 again. Weird thing is before i downgrade to jf 1.5 i run a fastboot erase on all the pertinent partitions. The only one that doesn't get flashed or erased in the downgrade to 1.5 is the radio rom. This leads me to believe that either my hardware is on it's way out or something that gets set in the radio rom from cyanogen 4.0.4 gets carried over no matter what rom you flash until the radio is erased and re-flashed. Mind you the second one is a totally just a guess with no proof to back it up. I also tried to chmod 777 /data/misc/wifi/wpa_supplicant.conf like said in the last post but to no avail.
Something happened to my phone.. think its from updating the SPL, wifi and sd card will no longer work.
Anyone know of a way to downgrade SPL without SD Card access?
i do not know the exact steps but you should be able to flash it via fastboot since it does not use the sdcard. but you will need adb working on your computer
KHannel said:
Something happened to my phone.. think its from updating the SPL, wifi and sd card will no longer work.
Anyone know of a way to downgrade SPL without SD Card access?
Click to expand...
Click to collapse
I find it hard to believe that upgrading your spl would effect your wifi and sd card. You able to give more details.
More Details
Well here is what happened and where the phone is now.
I had installed Drizzy Touch Flo 2.8 had it up and running ( Haykuro's new SPL and yes, I upgraded Radio first ) , everything was working fine. Took the back off my phone and somehow the battery fell out. Put the battery back in and the phone was stuck in the htc boot loop. Went into recovery to see what was happening and the phone wasn't able to mount the SD Card. Went into /dev/block and there was no mmcblk0 showing at all.
I got home, I put the card into a reader on my computer and it read just fine, all partitions and everyhing intact. I figured maybe it messed up a sector and just wasn't being read, so just for the heck of it I wiped the partition table and repartitioned it. Put it back into the phone and still stuck at htc boot loop with no mmcblk0.
So I flashed the phone back to the 1.5 dev rom from the HTC web site ( using fastboot ). Got the phone up and running but now it shows an error on the notification bar "SD Card Removed". I've tried 3 different SD Cards, nothing. Here is the dmesg upon insertion of an SD Card:
<7>[ 77.724578] msmsdcc_platform_status_irq: 194
<6>[ 77.725433] mmc1: Slot status change detected (0 -> 1)
<4>[ 80.221893] trout_sdslot_switchvdd: Setting level to 2950
<3>[ 80.230895] mmc1: Command timeout
<3>[ 80.237640] mmc1: Command timeout
<3>[ 80.243896] mmc1: Command timeout
<3>[ 80.250183] mmc1: Command timeout
<3>[ 80.256835] mmc1: Command timeout
<3>[ 80.263549] mmc1: Command timeout
<3>[ 80.269775] mmc1: Command timeout
<3>[ 80.276214] mmc1: Command timeout
<3>[ 80.282623] mmc1: Command timeout
<3>[ 80.288909] mmc1: Command timeout
<4>[ 80.294464] trout_sdslot_switchvdd: Disabling SD slot power
#
Had taken a break from working the SD Card issue, and decided to check my email. Turned on wifi after about 60 seconds I get an error saying "Unable to start Wifi". After that error it won't even attempt to turn it on again. Here is dmesg while turning on wifi
<6>[ 181.843994] TIWLAN: Driver loading
<4>[ 181.844665] wifi_probe
<4>[ 181.844940] trout_wifi_power: 1
<4>[ 182.051116] trout_wifi_reset: 0
<4>[ 182.102478] trout_wifi_set_carddetect: 1
<7>[ 182.102783] mmc0: card_present 1
<6>[ 182.103057] mmc0: Slot status change detected (0 -> 1)
<3>[ 184.613708] mmc0: Command timeout
<4>[ 184.620727] mmc0: card claims to support voltages below the defined range. These will be ignored.
<4>[ 184.621582] mmc0: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
<6>[ 184.629089] mmc0: new SDIO card at address 0001
<6>[ 184.635101] TIWLAN: Found SDIO controller (vendor 0x104c, device 0x9066)
<6>[ 184.641021] TIWLAN: Driver initialized (rc 0)
<3>[ 185.643066] mmc0: Data timeout
<3>[ 185.643524] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 186.646179] mmc0: Data timeout
<3>[ 186.646789] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 187.649719] mmc0: Data timeout
<3>[ 187.650329] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 187.651336] SDIO_SyncRead: Retry succeeded
<4>[ 187.651794] TIWLAN: invalid chip id = 0x 0 0 0 0!
<6>[ 187.652221] TIWLAN: Driver loaded
<3>[ 189.092773] mmc0: Data timeout
<3>[ 189.093170] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 190.095825] mmc0: Data timeout
<3>[ 190.096466] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 191.098968] mmc0: Data timeout
<3>[ 191.099945] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 191.100616] SDIO_SyncRead: Retry succeeded
<3>[ 192.101654] mmc0: Data timeout
<3>[ 192.102264] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 193.104766] mmc0: Data timeout
<3>[ 193.105743] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 194.106292] mmc0: Data timeout
<3>[ 194.107238] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 194.107940] SDIO_SyncRead: Retry succeeded
<3>[ 195.125518] mmc0: Data timeout
<3>[ 195.126220] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 196.128784] mmc0: Data timeout
<3>[ 196.129760] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 197.132293] mmc0: Data timeout
<3>[ 197.132934] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 197.133972] SDIO_SyncRead: Retry succeeded
<3>[ 198.136474] mmc0: Data timeout
<3>[ 198.137481] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 199.140197] mmc0: Data timeout
<3>[ 199.140838] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 200.143768] mmc0: Data timeout
<3>[ 200.144409] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 200.145416] SDIO_SyncRead: Retry succeeded
<3>[ 201.148010] mmc0: Data timeout
<3>[ 201.148651] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 202.151855] mmc0: Data timeout
<3>[ 202.152496] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 203.155426] mmc0: Data timeout
<3>[ 203.156066] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 203.157073] SDIO_SyncRead: Retry succeeded
<3>[ 204.161895] mmc0: Data timeout
<3>[ 204.162536] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 205.165588] mmc0: Data timeout
<3>[ 205.166229] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 206.169158] mmc0: Data timeout
<3>[ 206.169799] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 206.170806] SDIO_SyncRead: Retry succeeded
<3>[ 207.173858] mmc0: Data timeout
<3>[ 207.174499] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 208.177551] mmc0: Data timeout
<3>[ 208.178192] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 209.181152] mmc0: Data timeout
<3>[ 209.181793] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 209.182464] SDIO_SyncRead: Retry succeeded
<3>[ 210.188385] mmc0: Data timeout
<3>[ 210.189025] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 211.192230] mmc0: Data timeout
<3>[ 211.192871] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 212.195373] mmc0: Data timeout
<3>[ 212.196380] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 212.197052] SDIO_SyncRead: Retry succeeded
<3>[ 213.276336] mmc0: Data timeout
<3>[ 213.277008] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 214.279937] mmc0: Data timeout
<3>[ 214.280578] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 215.283233] mmc0: Data timeout
<3>[ 215.284210] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 215.284881] SDIO_SyncRead: Retry succeeded
<3>[ 216.287963] mmc0: Data timeout
<3>[ 216.288604] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 217.291259] mmc0: Data timeout
<3>[ 217.292236] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 218.295043] mmc0: Data timeout
<3>[ 218.295684] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 218.296722] SDIO_SyncRead: Retry succeeded
<3>[ 219.299468] mmc0: Data timeout
<3>[ 219.300476] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 220.303131] mmc0: Data timeout
<3>[ 220.304107] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
<3>[ 221.306610] mmc0: Data timeout
<3>[ 221.307250] SDIO_SyncRead: Read operation failed (-110) (retries = 3)
<3>[ 221.308258] SDIO_SyncRead: Retry succeeded
<3>[ 222.310913] mmc0: Data timeout
<3>[ 222.311889] SDIO_SyncRead: Read operation failed (-110) (retries = 5)
<3>[ 223.314453] mmc0: Data timeout
<3>[ 223.315093] SDIO_SyncRead: Read operation failed (-110) (retries = 4)
#
I'm not exactly blaming the SPL, but its that and the Radio are the ONLY things left that has not been changed. I can't downgrade the radio without first changing the SPL because we know that will brick with Haykuro's SPL that I'm running.
Hmm, someone had suggested a short in the phone... startin to look more and more like that now that I'm looking at the Wifi dmesg output.
I've loaded every partition on the phone, boot, recovery, system, etc. However, I think SPL is the only thing I can't change without SD Card access. I've thought of maybe being able to re-write the recovery to have it read from another directory than the SD Card... anyone ever done this?
Thanks for the help,
Ken
Hi all,
I have downloaded the 6.1.0-RC2-Aria ROM a couple of days ago, installed it on my phone and everything is working great - thanks again attn1!
Now I would like to do some testing/dev with it; instead of tampering with my device.
I created a NANdroid back-up and then tried running the ROM on the SDK emulator following threads instructions found over here and other forums, e.g. :
http://forum.xda-developers.com/archive/index.php/t-572497.html
http://forum.xda-developers.com/showthread.php?t=525930&page=2
http://android.modaco.com/content/g...p-and-running-a-full-rom-with-the-market-etc/
The emulator seems to be running OK, but the kernel gets stuck before it even gives me the boot animation. (- c.f. below for the parameters passed and the kernel boot log; adb logcat does not report anything at all -)
Anyone has been able to run this particular ROM on the SDK emulator or may give me pointers as to how to do so successfully?
Thank you.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
C:\android-sdk-windows\tools>emulator -avd testing -show-kernel -sdcard mycard
Uncompressing Linux............................................................................................. done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.29-00261-g0097074-dirty ([email protected]) (gcc version 4.4.0 (GCC) ) #20 Wed Mar 31 09:54:02 PDT 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
CPU: VIVT data cache, VIVT instruction cache
Machine: Goldfish
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: qemu=1 console=ttyS0 android.checkjni=1 android.qemud=ttyS1 android.ndns=1
Unknown boot option `android.checkjni=1': ignoring
Unknown boot option `android.qemud=ttyS1': ignoring
Unknown boot option `android.ndns=1': ignoring
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 515840KB available (2616K code, 681K data, 104K init)
Calibrating delay loop... 238.38 BogoMIPS (lpj=1191936)
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
net_namespace: 520 bytes
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 160K
goldfish_new_pdev goldfish_interrupt_controller at ff000000 irq -1
goldfish_new_pdev goldfish_device_bus at ff001000 irq 1
goldfish_new_pdev goldfish_timer at ff003000 irq 3
goldfish_new_pdev goldfish_rtc at ff010000 irq 10
goldfish_new_pdev goldfish_tty at ff002000 irq 4
goldfish_new_pdev goldfish_tty at ff011000 irq 11
goldfish_new_pdev smc91x at ff012000 irq 12
goldfish_new_pdev goldfish_fb at ff013000 irq 13
goldfish_new_pdev goldfish_mmc at ff005000 irq 14
goldfish_new_pdev goldfish_memlog at ff006000 irq -1
goldfish_new_pdev goldfish_events at ff014000 irq 15
goldfish_new_pdev goldfish_nand at ff015000 irq -1
goldfish_new_pdev goldfish-switch at ff016000 irq 16
goldfish_new_pdev goldfish-switch at ff017000 irq 17
goldfish_pdev_worker registered goldfish_interrupt_controller
goldfish_pdev_worker registered goldfish_device_bus
goldfish_pdev_worker registered goldfish_timer
goldfish_pdev_worker registered goldfish_rtc
goldfish_pdev_worker registered goldfish_tty
goldfish_pdev_worker registered goldfish_tty
goldfish_pdev_worker registered smc91x
goldfish_pdev_worker registered goldfish_fb
goldfish_pdev_worker registered goldfish_mmc
goldfish_pdev_worker registered goldfish_memlog
goldfish_pdev_worker registered goldfish_events
goldfish_pdev_worker registered goldfish_nand
goldfish_pdev_worker registered goldfish-switch
goldfish_pdev_worker registered goldfish-switch
ashmem: initialized
Installing knfsd (copyright (C) 1996 [email protected]).
yaffs Mar 26 2010 13:38:48 Installing.
msgmni has been set to 1008
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
allocating frame buffer 320 * 480, got ffa00000
Console: switching to colour frame buffer device 40x30
console [ttyS0] enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
eth0 (smc91x): not using net_device_ops yet
eth0: SMC91C11xFD (rev 1) at e084c000 IRQ 12 [nowait]
eth0: Ethernet addr: 52:54:00:12:34:56
goldfish nand dev0: size 6ea0000, page 2048, extra 64, erase 131072
goldfish nand dev1: size 4000000, page 2048, extra 64, erase 131072
goldfish nand dev2: size 4000000, page 2048, extra 64, erase 131072
mice: PS/2 mouse device common for all mice
*** events probe ***
events_probe() addr=0xe0854000 irq=15
events_probe() keymap=qwerty2
input: qwerty2 as /devices/virtual/input/input0
goldfish_rtc goldfish_rtc: rtc core: registered goldfish_rtc as rtc0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
goldfish_rtc goldfish_rtc: setting system clock to 2010-12-05 03:32:33 UTC (1291
519953)
Freeing init memory: 104K
mmc0: new SD card at address e118
mmcblk0: mmc0:e118 SU02G 1.00 GiB
mmcblk0:
init: cannot open '/initlogo.rle'
yaffs: dev is 32505856 name is "mtdblock0"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.0, "mtdblock0"
yaffs_read_super: isCheckpointed 0
save exit: isCheckpointed 0
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: restored from checkpoint
yaffs_read_super: isCheckpointed 1
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
request_suspend_state: wakeup (3->0) at 4206070790 (2010-12-05 03:32:36.48957032
7 UTC)
init: untracked pid 34 exited
init: untracked pid 42 exited
request_suspend_state: wakeup (0->0) at 4256118986 (2010-12-05 03:32:36.53963374
7 UTC)
init: untracked pid 44 exited
init: untracked pid 53 exited
request_suspend_state: wakeup (0->0) at 9387505566 (2010-12-05 03:32:41.67101886
1 UTC)
init: untracked pid 54 exited
init: untracked pid 60 exited
init: untracked pid 68 exited
init: untracked pid 69 exited
request_suspend_state: wakeup (0->0) at 14518491192 (2010-12-05 03:32:46.8020076
30 UTC)
init: untracked pid 74 exited
init: untracked pid 82 exited
init: untracked pid 83 exited
request_suspend_state: wakeup (0->0) at 19655651551 (2010-12-05 03:32:51.9391665
92 UTC)
init: untracked pid 89 exited
request_suspend_state: wakeup (0->0) at 24731037643 (2010-12-05 03:32:57.0145514
97 UTC)
init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting i
nto recovery mode
save exit: isCheckpointed 1
save exit: isCheckpointed 1
Restarting system with command 'recovery'.
Reboot failed -- System halted
+++++++++++++++++++++++++++++++++++++++++++++++++++++
LOL, root the emulated device!
I would if I knew how to do so on the emulator itself
I have rooted my actual device, but I have no idea how to accomplish this on the emulator; could you elaborate or send links on how to do this please?
I have googled and nothing relevant has showed up other than the emulator is supposed to be already root-ed; by issuing adb root I get:
C:\android-sdk\android-sdk-windows\tools>adb root
adbd is already running as root
I also tried running the emulator with the '-shell' parameter, but got the same result and the boot process gets stuck as well...
A little bit of extra guidance would be great.
Thank you.
Hi,
I have tested all possible ROMS (Beast, Utopian, NI, CyanogemMod, EdenX,...) and I encounter the same problem: the interface goes in Error after some time. When I flash and start using it, it's woking fine, but after some time (counted in minutes, not in days), network is down and in the Network settings panel, I get the message "error". Sometimes the interface comes back up, but at some point, it stays in error and in logcat I have
E/WifiService( 1242): Failed to load Wi-Fi driver.
Dmesg gives:
Code:
[<4>[ 1190.039532] Dongle Host Driver, version 4.218.223.1
<4>[ 1198.044261] __ratelimit: 17 callbacks suppressed
<4>[ 1198.048915] dhd_module_init: sdio_register_driver timeout
I also see other errors in the dmesg output:
Code:
<4>[ 1180.754089] dhdsdio_dpc: FAILEDnewstatusREAD, LINE 4092
<4>[ 1180.836536] dhdsdio_dpc: failed backplane access over SDIO, halting operation 1
<4>[ 1180.844034] dhdsdio_dpc: failed backplane access over SDIO, halting operation 1
<4>[ 1180.851469] dhdcdc_query_ioctl: dhdcdc_msg failed w/status -5
<4>[ 1180.871027] dhd_ioctl_entry DONGLE_DOWN,__FUNCTION__
<4>[ 1180.954228] dhd_start_xmit: xmit rejected pub.up=1 busstate=0
<4>[ 1180.960068] dhd_start_xmit: Event RELOAD send up
<4>[ 1180.964706] BUG wlan0 code -19 qlen 0
<4>[ 1186.978451] dhd_ioctl_entry DONGLE_DOWN,__FUNCTION__
<4>[ 1190.019110] bcmsdh_sdmmc: probe of mmc0:0001:1 failed with error -5
I attached logcat and dmesg files.
Before I send my unit to repair, anyone having seen the same problem? Is this really a hardware problem, and if yes, how comes it works fine for some time before breaking?
I've just seen in the dmesg that there are badblocks on mtdblock4. Could that be the reason?
Code:
<4>[ 35.143702] yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<6>[ 35.163593] tegra_nand tegra_nand: Block 0x92d is bad [chip=0,offset=0x125a0000]
<3>[ 35.170984] tegra_nand tegra_nand: Reading OOB data of bad block
I hope someone can help me as I'd rather not send my adam back for repair!
Thanks
Raph
Try the unbricking procedure (not sure it will actually help though). A fresh flash with NVFlash might get you up and running again though the bad sectors do concern me.
Hello,
i just got my smart-tv android stick
it's from arena scientific model named HD-505
it's RK3066-cortex-A9 and has SDK-ENG_4.1_HD505_20000101 and Kernel 3.0.8+
i'm not able to enable wifi, and tried allot of applications and the same problem
i also downloaded terminal emulator and tried
svc wifi enable
but i got killed and not working
tried to disable and then enable but not working
I need to know if any have a solution
and also if i can upgrade/reimage it and from where to go the firmware and how to do it
thx for you help
here is the output of logcat
I/Xposed ( 7263): -----------------
I/Xposed ( 7263): Added Xposed (/data/data/de.robv.android.xposed.installer/bin/XposedBridge.jar) to CLASSPATH.
D/AndroidRuntime( 7263):
D/AndroidRuntime( 7263): >>>>>> AndroidRuntime START de.robv.android.xposed.XposedBridge <<<<<<
D/AndroidRuntime( 7263): CheckJNI is ON
I/AndroidRuntime( 7263): JNI options: '-Xjniopts:warnonly'
D/dalvikvm( 7263): Unable to stat classpath element '/system/framework/filterfw.jar'
D/dalvikvm( 7263): Trying to load lib libjavacore.so 0x0
D/dalvikvm( 7263): Added shared lib libjavacore.so 0x0
D/dalvikvm( 7263): Trying to load lib libnativehelper.so 0x0
D/dalvikvm( 7263): Added shared lib libnativehelper.so 0x0
D/Xposed ( 7263): Using structure member offsets for mode WITH_JIT
I/Xposed ( 7263): Found Xposed class 'de/robv/android/xposed/XposedBridge', now initializing
I/Xposed ( 7263): -----------------
I/Xposed ( 7263): Oct 19, 2013 6:28:12 PM UTC
I/Xposed ( 7263): Loading Xposed (for com.android.commands.svc.Svc)...
I/Xposed ( 7263): Loading modules from /data/app/org.tracetool.hackconnectivityservice-1.apk
I/Xposed ( 7263): Loading class org.tracetool.hackconnectivityservice.Mod
D/AndroidRuntime( 7263): Calling main entry com.android.commands.svc.Svc
D/AndroidRuntime( 7263): Shutting down VM
D/WifiService( 265): setWifiEnabled: true pid=7263, uid=0
D/dalvikvm( 7263): GC_CONCURRENT freed 610K, 77% free 978K/4096K, paused 0ms+0ms, total 13ms
D/WifiHW ( 265): Read wifi chip type OK ! wifi_chip_type = RTL8188EU
D/WifiHW ( 265): wifi_load_driver: DRIVER_MODULE_PATH = /system/lib/modules/8188eu.ko, DRIVER_MODULE_ARG =
I/WidgetPrefs( 3393): Loaded widget prefs for 4
W/CommandListener( 80): Failed to retrieve HW addr for wlan0 (No such device)
D/CommandListener( 80): Setting iface cfg
E/WifiStateMachine( 265): Unable to change interface settings: java.lang.IllegalStateException: command '133 interface
setcfg wlan0 0.0.0.0 0 down' failed with '400 133 Failed to set address (No such device)'
E/WifiHW ( 265): Unable to open connection to supplicant on "wlan0": No such file or directory
I/wpa_supplicant( 7295): rfkill: Cannot open RFKILL control device
E/wpa_supplicant( 7295): nl80211: Could not configure driver to use managed mode
E/wpa_supplicant( 7295): Could not read interface wlan0 flags: No such device
E/wpa_supplicant( 7295): wlan0: Failed to initialize driver interface
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiStateMachine( 265): Failed to setup control channel, restart supplicant
W/CommandListener( 80): Failed to retrieve HW addr for wlan0 (No such device)
D/CommandListener( 80): Setting iface cfg
E/WifiStateMachine( 265): Unable to change interface settings: java.lang.IllegalStateException: command '135 interface
setcfg wlan0 0.0.0.0 0 down' failed with '400 135 Failed to set address (No such device)'
I/wpa_supplicant( 7325): rfkill: Cannot open RFKILL control device
E/wpa_supplicant( 7325): nl80211: Could not configure driver to use managed mode
E/wpa_supplicant( 7325): Could not read interface wlan0 flags: No such device
E/wpa_supplicant( 7325): wlan0: Failed to initialize driver interface
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiHW ( 265): Supplicant not running, cannot connect
E/WifiStateMachine( 265): Failed to setup control channel, restart supplicant
W/CommandListener( 80): Failed to retrieve HW addr for wlan0 (No such device)
D/CommandListener( 80): Setting iface cfg
E/WifiStateMachine( 265): Unable to change interface settings: java.lang.IllegalStateException: command '137 interface
setcfg wlan0 0.0.0.0 0 down' failed with '400 137 Failed to set address (No such device)'
I/wpa_supplicant( 7355): rfkill: Cannot open RFKILL control device
E/wpa_supplicant( 7355): nl80211: Could not configure driver to use managed mode
E/wpa_supplicant( 7355): Could not read interface wlan0 flags: No such device
E/wpa_supplicant( 7355): wlan0: Failed to initialize driver interface
E/WifiStateMachine( 265): Failed to start supplicant!
I/WidgetPrefs( 3393): Loaded widget prefs for 4
and the output of dmesg
<4>[ 3659.320483] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.10) init.
<6>[ 3659.327835] usbcore: deregistering interface driver rtl8188eu
<6>[ 3970.236599] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<3>[ 3995.978894] init: untracked pid 6914 exited
<4>[ 4103.728041] Current WiFi chip is RTL8188EU.
<4>[ 4103.773033] =======================================================
<4>[ 4103.779414] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 4103.790871] =======================================================
<4>[ 4103.797142] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.10) init.
<6>[ 4103.806603] usbcore: registered new interface driver rtl8188eu
<3>[ 4242.564293] init: untracked pid 7103 exited
<4>[ 4244.402560] =======================================================
<4>[ 4244.408850] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 4244.415446] =======================================================
<4>[ 4244.422095] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.10) init.
<6>[ 4244.429710] usbcore: deregistering interface driver rtl8188eu
<4>[ 4277.579884] Current WiFi chip is RTL8188EU.
<4>[ 4277.617428] =======================================================
<4>[ 4277.624450] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 4277.631286] =======================================================
<4>[ 4277.638904] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.10) init.
<6>[ 4277.647255] usbcore: registered new interface driver rtl8188eu
<4>[ 4308.063197] =======================================================
<4>[ 4308.069571] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 4308.076144] =======================================================
<4>[ 4308.082492] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.10) init.
<6>[ 4308.089923] usbcore: deregistering interface driver rtl8188eu
<3>[ 4372.112169] init: untracked pid 7303 exited
<6>[ 4377.603039] EXT4-fs (mtdblock8): re-mounted. Opts: (null)
<3>[ 4562.414517] init: untracked pid 7385 exited