I tried to flash the Overcome Rom onto my Tab, but it didn't work. I would turn it on see the Samsung Galaxy Tab screen, but then immediately go to a black screen.
So I tried to download my stock .tar file (M180S.DL08.0204-REV3-UPGRADE-CL761350_user.tar) and flashed it again. I went into download mode and put it into the .pda slot, and tried again. Still nothing. The same Samsung Logo then a black screen.
Then I read something about using P1_add_hidden.pit and then flashing the Roto JME_Full to get it back to life. So I did this, and then rebooted. This definitely did not work. Now I saw just a red line on the screen when I booted.
So anyway, I am able to get into download mode, but NOT recovery mode.
Also, when I try to charge it or plug it into the computer I can see the battery come up for a second, then it automatically goes to a black screen.
PLEASE HELP ME! I am a noob and don't know what to do.
Thanks.
UPDATE:
I tried out that program Heinberg(?). I don't remember the name and I am at work now. I was able to get a tar file somewhere and take out all the parts and flash. i am now able to see the Samsung Galaxy Tab logo, then the blue progress bar under it but it seems to freeze up after that and goes nowhere. I am also still unable to boot into recovery mode.
Good Luck. I am in SK and when I found out the other countries didn't have the DMB TV antennae it was a simple guess to assume there was software that the devs in other countries didn't know about.
I took mine to Samsung this week and they asked if I had downloaded anything recently. They did a hard reset and brought back my WiFi. Seems there are some laws in place that you have 14 days buyer's remorse to return it, followed by 30 days (or maybe 90) to replace a bad unit, and then 1 year free repairs. If you are within the first 2 time frames I would find a reason to return it as broken.
If someone can help you, I really am a noob when it comes to rooting and etc, then remind them of the DMB TV section and to watch out for it when they suggest something.
Hope this helps!
deadhead85: Have you found a way to fix it? Can you please share the firmware or at least a download link so i can "ressurect" my Korean Galaxy Tab?
Thanks in advance!
what happened with you?!!!
Related
I just installed PSX for my galaxy and installed the all roms app...(forgot name) but i was downloading a game and then i left my phone alone to let it download.
10 minutes later my phone wouldn't go onto the lockscreen aka froze. so i decided to take the battery out...(mind you the download wasnt finished) and now when i boot up the phone it just goes the the "S" logo and either turns off...or freezes.
note* I can access ADB through 3 button reset.
However i do not want to wipe data. as i have important pictures on my internal sd and videos. i was thinking of using the "wiping cache option" cause my theory was that the frozen app was still in memory or something....can anyone give me suggestions to fix this issue?...try to avoid "wipe data option"
thanks.
edit** have got into download mode and tried to use ODIN but odin doesnt see my phone....however kies does. but kies cant connect to it. keep saying connecting to device....any helP??
flashing a rom doesn't delete your pictures I think
just contacts, sms, apps etc
but it is better if someone else also verifies it
edit: oh sorry I just saw you wrote cache... i am not sure what that does. I don;t think it deletes your data.
allotrios said:
flashing a rom doesn't delete your pictures I think
just contacts, sms, apps etc
but it is better if someone else also verifies it
edit: oh sorry I just saw you wrote cache... i am not sure what that does. I don;t think it deletes your data.
Click to expand...
Click to collapse
i am waiting for someone to clarify that i can "wipe cache". By the way, i do also require my SMS messages, there is some delicate information within them. i am currently googling wipe cache. any other help is greatly appreciated. thanks for the quicky reply allotrios
just wiped cache. phone still wont boot to main homescreen it freezes, and/or shuts off. last resort is wipe data. anyone offer a suggestion other than that?
WTH? i just wiped date/factory reset and hit reboot and it STILL doesnt load. it goes to the "S" symbol and shuts off or freezes.
edit* trying to find firmware for i9000M canada version. Attempting to use odin but cant find links
just got pit file! where can i get the pda phone and csc files? what else do i need to flash it using odin? im constantly googling and trying to do this before i sleep
edit** just tried to use odin with a different firmware with all correct files. when pluggin in usb cable in download mode, Odin doesnt see my phone.
kies sees the device but keep saying "connecting to device"
welcome to my world........flashes fine, wiped data/cache, still freezes at the 's'. i just sent my phone in after i couldn't get it going after flashing 40 times.
it would seem your sdcard is corrupted or fried.........try flashing some more roms (jg9 or jh2) with different pits (512 and 803) and wipe data/cache. samfirmware.com for the roms.
as well, if you do not have the 3br fix to get into download mode (since you said you get into download mode via adb), i would suggest you flash the fix asap before you lose the ability to use adb.
wang1chung said:
welcome to my world........flashes fine, wiped data/cache, still freezes at the 's'. i just sent my phone in after i couldn't get it going after flashing 40 times.
it would seem your sdcard is corrupted or fried.........try flashing some more roms (jg9 or jh2) with different pits (512 and 803) and wipe data/cache. samfirmware.com for the roms.
as well, if you do not have the 3br fix to get into download mode (since you said you get into download mode via adb), i would suggest you flash the fix asap before you lose the ability to use adb.
Click to expand...
Click to collapse
ive been sitting here for 3 hours...have a exam tommorow and am fed up. Problem is i bought this phone from a friend, so warrranty is out of the option.
The other problem WHICH can be solved somehow...is that my computer sees my phone. (kies does..but wont connect)..i can "technically" use odin if i can somehow get my phone to work with it.
If the case that my internal sd card is fried....i dont have warranty, do i have manufacturer warranty?. aka samsung?. i dont know just a thought.
can you get into download mode? i assume no as i had the same issue, and adb wouldn't work unless the phone had fully booted up. odin will only recognize your phone in download mode.
the only options you have are:
make a jig with 301k resistor to get your phone into download mode and try flashing
send your phone out to be repaired (some other thread mentioned repair shop in ontario)
go into bell and see if they will take your phone in for repair (samsung 1yr warranty)
wang1chung said:
can you get into download mode? i assume no as i had the same issue, and adb wouldn't work unless the phone had fully booted up. odin will only recognize your phone in download mode.
the only options you have are:
make a jig with 301k resistor to get your phone into download mode and try flashing
send your phone out to be repaired (some other thread mentioned repair shop in ontario)
go into bell and see if they will take your phone in for repair (samsung 1yr warranty)
Click to expand...
Click to collapse
i CAN get into DOWNLOAD MODE. but problem is ODIN doesnt see my phone
edit* could you give me a link to that store?
ah, ok...........i had the same problem, but after i installed the drivers for it, no more problems.
you should try that before you send your phone in.
edit: found the link
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
If you're phone can get into download mode then it should work. However, Odin is somewhat temperamental, have you tried Heimdall?
Benjamin Dobell said:
If you're phone can get into download mode then it should work. However, Odin is somewhat temperamental, have you tried Heimdall?
Click to expand...
Click to collapse
i have just woken up. my phone is now dead, i cant turn it on. i have tried connecting the charger and it wont charge my phone......anyone have any ideas? is it bricked? internal SD card fail?......i dont have Bell warranty, would samsung canada cover this issue? as internal sd cards area known to fail?......thanks.
edit** never mind, it is now charging. i will keep this thread updated when i finish my exam today and let everyone know where my phone stands. So far i think it is a internal sd card error. But i am hoping after a full charge it may work again.
hmm still same thing, i load to "S" screen and it shuts off, i can still access 3 button recovery and download mode. i just called samsung too, they said to call my service provider, but problem is i bought the phone second-hand.
Have just flashed JH2 firmware and JG5 firmware on phone with ODIN, phone still boots up to "S" logo and then shuts off .
edit** only JH2 firmware will go through to my phone on ODIN, i have tried a 2nd time, it goes to the S logo....looks like it will load to phone, and then just doesnt and shuts off.
So is it safe to say the phone is bricked?.....i have heard of someone in this forum saying there was a unofficial samsung store somewhere in Ontario that fixes galaxy phones?....anyone can link me to this?. I don't have warranty as i bought it 2nd hand. hmm..now idont know what to do, besides, i guess, save up and buy a new phone.
edit** it cant be bricked if i can still access recovery and download mode? right.
Phone is OFFICIALLY bricked, tried flashing a 803 pit file, now it wont power on, or charge through wall charger. thanks to all who helped in little ways. but looks like ill have to buy a new phone.
jark99 said:
edit** it cant be bricked if i can still access recovery and download mode? right.
Click to expand...
Click to collapse
that would normally be true........with one exemption to the rule.......if your sdcard is corrupted/fried.
if you have flashed back to 2.1 with repartition and wiping multiple times with different PITS, and still the same issue, then nothing will help (at the moment) aside from sending it in.
I Had this exact same issue a week ago. My guess is that your internal SD is dead and you will need to send it out for repairs. Im still waiting for mine from bell to see if they only reflashed or replaced the whole motherboard.
Light
Problem is i dont have Bell warranty....so i am kinda a goner. unless someone has a suggestion?
Just because you don't have warranty doesn't mean you can't pay to get it repaired (at least get it inspected and a quote). Should be much cheaper than saving up for a new one!
If you bought it from your friend, they should be able to send it on your behalf.
Sorry to hear about your issues :/
JimiJam said:
Just because you don't have warranty doesn't mean you can't pay to get it repaired (at least get it inspected and a quote). Should be much cheaper than saving up for a new one!
If you bought it from your friend, they should be able to send it on your behalf.
Sorry to hear about your issues :/
Click to expand...
Click to collapse
In Ontario, the only way to get our phone repaired is through Bell sending it to a service center, Problem is my friend doesnt have the receipt. He bought it from a friend. Its past through 3 hands to get to me. Friend's Friend > My Friend > ME.
So...i am currently looking at cell repair shops to see if they can fix this problem....BUT i am assuming alot of them use Odin or some sort of flashing, WHICH i have already done .....
I also called 5 bell stores to see if i could get the receipt printed out using the IMEI code, all of them said this information cannot be provided due to "privacy issues." They told me to call Samsung or talk to a 3rd party cell repair center.....fml.
Hello there,
i need help with fixing my phone, i tried to change the model of the phone by changing the build.prop file, like everyone else who does something like this for the first time. i bricked my phone and it went into a bootloop.
after ton of research on multiple websites and especially xda-developers, i managed to flash the phone with a suitable frameware form the galalxy S5, the first time i did it i accidently put the firmware into the BL position into ODIN. then i put it into AP and reset the device.
the download was succesfull, but the phone didnt start up. the next day i turned the phone on, and after 5 mins being stuck on the Samsung logo, it finally booted up and i managed to get inside the phone. i thought it has been fixed, the device asked if i wanted to apply updates, which i said yes to. It updated and tried to restart itself.
now it wont turn on, everytime i try restarting it it is just shutting itself again animated samsung logo fades.
i don´t know what i should do right now, i tried looking for similar situations to mine but i couldn´t find anything similar.
Can someone tell me what i should do in oder to get it fixed pls.
model: SM-g900f
thanks in advance.
edit: it is working again, but it has been completely reset. for now it worked. going to update it again, i will put if the same problem accours again.
bayar16 said:
i tried to change the model of the phone by changing the build.prop file, like everyone else who does something like this for the first time. i bricked my phone and it went into a bootloop.
Click to expand...
Click to collapse
Most likely you forgot to set permissions 0x644 for this file after editing it.
It's a common mistake.
Folks I initially tried to root my phone *SM-G935F* using Odin and a CF hero2lte file. The flashing was all good to go with a green pass. Then upon rebooting the phone got stuck on the Samsung logo boot screen with red words at the top that said **Recovery Is Not Seandroid Enforcing**. This being the case all I was able to get into was (Download Mode). I tried to do the samething a few times and gave up after no successful attempts and the phone not being able to successfully reboot.
Fast forward to present I downloaded the phone's firmware which was a zip that contained 4 files (5 total actually because there was another CS file in the event that you wanted to preserve your data etc.). I loaded all of the files in Odin and made an attempt to flash the phone again however it got stuck on *System* and never go to Green *Pass*. So I figured I would try it a couple of more times in case Odin or something just got hung up on the first try. Any how that wasn't the case.
Now with the above being said what did change is when I would try to reboot into *Download Mode* again it said something along the lines of Emergency Smart Switch Recover. I downloaded Smart Switch onto my computer and went through the specific steps to try to Recover the phone using Smart Switch. Now after it was all done I got to the blue screen with the Android and it said *Erasing...* then the phone booted up and its now stuck at the Samsung animation screen. This being said as of current I can now access *Download Mode* and also boot into the black screen or *Recovery Mode* I think its called where I can reboot the phone through a bootloader, power off, factory data wipe / reset, etc etc.
The above being said I have tried the factory reset / wipe. The reboot in bootloader, reboot phone, all with no success.
Also would like to add that before doing all of the above I forgot to tick *USB Debugging* in Developers Mode when the phone was in its normal state. I must also mention that all of this was a first for me and I looked at doing so to try and recover lost data on my phone. Also wanna add that I am not too familiar with ADB or twrp or how to mess with any of that stuff given the limited access I have to my device because it can no longer bootup like it normally would.
I'm currently at a lost of words as to what I can do next as I am out of ideas and could really use some help. I would also be more than happy to donate a little to anyone who is able to help me boot my phone back up and get things back to normal.
Any and all help would be greatly appreciated.
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
Bro would you tell pls , what you did to restore. Thanks
shah22 said:
Bro would you tell pls , what you did to restore. Thanks
Click to expand...
Click to collapse
After me not being successful with the root or with flashing the stock OEM firmware using Odin the phone would get hung up in download mode and the only difference when it would go into download mode it would say to use SmartSwitch Emergency Recover which is what was used and that fixed the issue and the phone rebooted completely fine.
However the above being said I honestly still feel the phone has some small minor issues that I did try to resolve all with no luck. First off when loading to my home screen the icons, and clock, etc etc take about 2 or 3 seconds longer for them to appear on screen than it used like when the phone was new out of the box.
Other thing to note is for some odd reason this issue was thought to be worked out by just booting into recovery mode and doing a factory reset from there, wiping the cache, etc etc. Well this also didn't solve the issue and for some odd reason when performing this the phone didn't reboot on its own.
Basically how it should be normally is after you select that you want to do a factory reset, wipe cache, etc etc, the phone should normally reboot and go through the entire process by itself, however this was not the case. The phone instead went back to the recovery screen and I had to select reboot rather than it normally rebooting on its own.
I've honestly given up on things and given that it is in working order with just a few small minor hiccups I've decided to give the phone to a family member which they plan to use as trade-in credit towards a new Galaxy Note 8.
That being said I will always have a soft spot for the S7 Edge being it was my first smartphone after I had bought a Sony Xperia Z during the same year but returned it the day after because what was to me being poor quality of the Sony phone.
Hmm, looks strange bro , your phone didnt worked after flashing stock rom with odin , and this is the last resort , but you said it was normal before you tried to root , so i guess it was still a software issue other than some hardware problem due to software , but anyways wish you good luck in future , another thing is that my s7 edge has also a very poor build quality , has front camera issues , paint peeling around usb port , wifi issue and high battery degradation , but that happens i guess with today's phones
The version of Odin I used was v3.10.6. I had tried the most current version and a few others, and from the get go for whatever reason this was the only version that would actually pickup the phone being added. Well wait hold on a second the other version would say added when the phone was in but when hitting start nothing would happen, even after waiting an extensive amount of time, also note that the com was highlighted that blue ish color indicating the phone was being recognized by Odin but once again for some odd reason it was only version v3.10.6 that carried out the process of my root attempt and also the attempt I made flashing the original firmware on it.
As for quality the phone had no paint chip or peeling, neither the silver aluminum frame around it either. The build quality was beautiful and up to par with mine. I had a soft spot for my S7 Edge also because it was in the white color which at the time of purchasing was a bit more scarce than the other colors. I purchased the phone from an Amazon.com seller, and during that time I also purchased 2 others from other Amazon sellers but returned those because they had carrier animations for them that were Band LTE or Brand LTE, whatever its called.
This one had no carrier animation upon boot and turned out to be a UK Nougat model. Haven't really seen or came across another one since that would be from a trusted seller or source. Nowadays you never know what you're getting both on eBay and Amazon from these third party sellers.
Yeah thats really strange with odin , its good that you dont have quality issues which struck heavily on me , but yes everyone should be quite careful when ordering online and only should do with trusted resellers
Hydranize said:
Folks please disregard my post above as I was finally able to figure things out and get my phone back to its factory state. Thanks.
Click to expand...
Click to collapse
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
vini3237 said:
I'm facing the same problem buddy. Could you pass me the process for the recovery that was used?
Click to expand...
Click to collapse
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Hydranize said:
What phone are you having the issue with and what are you using that caused the issue? I can possibly try to help you out if I know a little more about your situation and device.
Click to expand...
Click to collapse
Phone is SM-G935FD
I do not know what caused it, I already got the celuar so, in status it says Custom.
I already tried to blink for odin 3 different Stocks and the same thing continues.
When I got it it could not access the recovery mode, only the download mode was accessible, after flashing the Brazilian Stock 6.0.1 I was able to access recovery mode.
The phone turns on, and hangs at boot, Samsung logo, restarts and stays in infinite looping.
Can it be Hardware?
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Hydranize said:
Try to flash the original Firmware for it, make sure the Firmware is the one specific to that model, download it and load all of the Firmware files into Odin.
Click to expand...
Click to collapse
Ok now i think what was the problem , you didnt enabled usb debugging , and for flashing with odin its a must ! , for guys who want to flash firmware using odin .. please enable usb debugging in developer options or you will have much issues and may also brick your phone , so if you dont want to enable usb debugging or developer options , just use samsung smart switch on pc to flash your firmware.
Yeah that was my issue was I had OEM Unlock checked off and one other thing in Developer Options and forgot to enable USB Debugging leaving me stuck in the process when the phone couldn't reboot normally after the flash attempts. But yeah SmartSwitch Emergency Recovery should definitely be able to fix and resolve the issue if the phone can't reboot normally.
So basically my S7 Edge ended up in a bootloop and I don't know why.. It had some problems, ended up in a bootloop from time to time, but after the battery drained I could restart it and it worked.
Since 3 days ago it constantly is in a bootloop, when I try to start the phone. Tried to let the battery drain, but still if I try to restart the phone, it's in a bootloop. Then I even can't access recovery or download mode...
I can access the recovery mode and download mode, after draining the battery.
I already tried: wiping cache and factory reset. Still bootloop, if I start the phone.
I had the idea of flashing a custom rom, but I didn't enable the OEM unlock..
What else can I try to get this phone back to work?.. [I am currently using my old Galaxy Nexus from 2011 and it runs surprisingly fine ]
EDIT: I got stock rom and stock recovery, so basically untouched stock.
Thank you guys in advance
Hayalamm
download stock rom from sammobile and flash through Odin after booting into download mode. search google or go through the guide section of the forum on how-to do it. you should be fine.
Do I have to install the Stock ROM of my carrier? I bought the phone via Vodafone in Germany, but I dont think, that it is branded.
woomera said:
download stock rom from sammobile and flash through Odin after booting into download mode. search google or go through the guide section of the forum on how-to do it. you should be fine.
Click to expand...
Click to collapse
I did like you said and it still gets stuck on the Samsung logo and after that bootlooping all the damn time.. It passes the "Samsung Galaxy S7 Edge screen, but always gets stuck after that..
EDIT: Tried to get into recovery mode an the display got wierdly stuck on the first screen at "installing system update".. There was a wide black stripe at the lowert part of the display and many many thin black stripes thoughout the whole display. Since then it is unresponsive for anything..
Are you sure that your phone doesnt have any hardware issues?
If not then search for details on Odin's options. Maybe theres an option for a more theral wiping.
Other than these i honestly dont know what else can be done exccept for sending to samsung support center.
woomera said:
Are you sure that your phone doesnt have any hardware issues?
If not then search for details on Odin's options. Maybe theres an option for a more theral wiping.
Other than these i honestly dont know what else can be done exccept for sending to samsung support center.
Click to expand...
Click to collapse
Sending in won't help I think, because my display is shattered a bit. Had the problems before that too..
I have a similar situation. So far I have not found a solution. the phone is lying around idly. I store it for experiments)))
Hi guys and gals
I am probably duplicating a thread for which I apologise in advance, but I have no clue for what key words I should be using to search for to find an existing answer, assuming there is one!?
I have the s8+ (SM-G955f) purchased in the UK via Vodafeon.
The battery died some weeks ago and I've had no money to be able to buy a replacement until now. I did try to use it now and again, but it last no more than a minute, but what did seem to happen is what is referred to as the boot loop saga.
I have followed other threads for instructions and downloaded Odin v.3.13 along with the varoius files (BL,AP,CP,CSC) from a zip file (G955FXXU9DTF1_G955FOVF9DTF1_VOD.zip) I was doing this late last night and do no remember which website I got it from, it took sooo long to download.
I am now at the point where I have connected the phone via USB and I have run the program and the status went to green, said 'pass' and the phone rebooted, however it is back to the Samsung welcome screen and sometimes keeps rebooting, other times, just stays there.
Where do I go from here? would it be that I have used the wrong firmware? I have never done this stuff before and have no clue, but am desperate to have a working phone as I have no money to replace it
Any advice, very welcome
If the battery went bad why flash firmware. Replace the battery
TheMadScientist said:
If the battery went bad why flash firmware. Replace the battery
Click to expand...
Click to collapse
I guess the issue was when the battery had issues, it would last maybe a minute or 2 before shutting down and then having to wait a full day before trying again. I did this for about a week as needed to get phone numbers from the phone along with some other info.
On the last occassion the phone turned on before the battery finally gave up, it seemed to go into the bootloop.
So now, I have tried various versions of Firmware via Frija and using Odin 3.13 to instal, but the phone doesn't seem to want to accept it.
The phone was originally purchase via Vodafone in the UK. I have tried VOD and BTU.
I am now in Asutralia, so have also tried TEL and VAU as have had sims from them also.. if that makes a difference?
I cannot get into the recovery mode at the moment, no clue why, just the download screen. The last time it went into recovery it kept mentioning about ATT which I don't understand as the phone has never had an AT&T connection which I think is in the USA and the phone has not been there..
Does anyone have any other suggestions? Would it be crazy to try and instal a custom OS and then revert back, or does the phone always remember the original firmware? I hope this all makes sense as this is all new to me..
Thanks in advance.