Related
I believe based on a few testers' results that I have fixed this at a kernel level. I had tried this kernel fix originally back when this first happened but I didn't boost the values high enough to make a difference in testing, so thanks to tiamat for more precise values. I have tweaked the values to be louder than my previous kernel, you might notice a slight crackle and likely need to turn down one slot at the highest setting now if you never had volume issues, the highest slots are for people that seem to have more serious volume issues. If this works for people I'll get it merged into the cm mecha msm7x30 kernel.
If this works or doesn't work, PLEASE post specifically and accurately, this can only get better if I get feedback. Please also read the OP fully, there are a lot of questions being asked towards the back pages of this thread that could easily be answered with 2 seconds of reading. As always, you can find me in #slayher on freenode if you want to give more specific feedback or scenarios.
Kernel
http://platypus.memoryfire.com/mecha/cmkernel-test.zip
-------------------
OUTDATED
-------------------
Right now this is a temporary workaround until something more elegant can get merged into the source but I need to spend more time with it. The test users I gave this out to reported better volume in: backspeaker, earpiece and headphone jack. Since this has worked with a few people I'm going to post it here and see how it works for others. I don't personally have low audio on CM7 so testing of this was done by a few affected users so thanks to those who tested it, especially syco; and also slayher and jcase as well.
INFO:
1) CM7 rc0.4 is required (this post will be updated if new versions come out)
2) A system nandroid should be taken, this updates a file in system.
3) This is a hack, all the tests done had good results but be aware of this fact. Use at your own risk.
---
Flash this through recovery, try these files first. If you still have issues see below.
CM7 rc0.4:
http://platypus.memoryfire.com/mecha/cm7volfix.zip
CM7 rc0.6:
http://platypus.memoryfire.com/mecha/cm7volfix06.zip
CM7 rc1.1 MR1:
http://platypus.memoryfire.com/mecha/cm7volfix11mr1.zip
CM7 rc1.1 MR2:
http://platypus.memoryfire.com/mecha/cm7volfix11mr2.zip
CM7 rc1.2 MR1:
http://platypus.memoryfire.com/mecha/cm7volfix12mr1.zip
CM7 rc1.2 MR2:
http://platypus.memoryfire.com/mecha/cm7volfix12mr2.zip
Enjoy.
edit: this should be unneeded based on reports of people using 0.6 but I uploaded it anyway if people want it
---
Thanks for the feedback guys, it is helpful and greatly appreciated. A few users have told me that the volume in-call still wasn't loud enough, so I cooked up a 'this goes to 11' version. Users should ONLY flash this if their headset isn't loud enough with the normal version and this should be considered very experimental. I am putting this out there due to demand but you should turn down your volume before flashing this second hack should you need it. You have been warned
Thanks to samsuck for testing this.
outdated:
ONLY use this if the first file didn't work 100% for you.
CM7 rc0.4 'goes to 11' version:
http://platypus.memoryfire.com/mecha/cm7volfix_2.zip
CM7 rc0.6 'goes to 11' version:
http://platypus.memoryfire.com/mecha/cm7volfix06_2.zip
Confirmed for me.
I tested this for utkanos, on a fresh install of CM7 .4 and it has helped out my volumes all around. Incall audio, back speaker, and headset audio where all noticeably better. Bluetooth Audio seemed to remain the same if not a tad better. Give this a try and report back here if you experience the same.
wally19 said:
I tested this for utkanos, on a fresh install of CM7 .4 and it has helped out my volumes all around. Incall audio, back speaker, and headset audio where all noticeably better. Bluetooth Audio seemed to remain the same if not a tad better. Give this a try and report back here if you experience the same.
Click to expand...
Click to collapse
same here, helped a lot.
Same here.
Sent from my ThunderBolt using XDA Premium App
I had the same results. In call volume is back to normal. Actually had to turn it down a notch for a change.
Sent from my ThunderBolt using Tapatalk
I tested many many iterations of this. I can say that the one that I currently have is awesome. back speaker is so loud i can hear the ringer in the other room. I can now talk on the phone with the ac on in my car as well. Great work!
Does this really deserve to have its own thread? Why not put this in CM7 thread?
Sent from my ADR6400L using XDA App
Dork6243 said:
Does this really deserve to have its own thread? Why not put this in CM7 thread?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Considering people on this forum have a problem reading (as evidenced by the same 5 questions asked 300 times in the CM7 thread) I decided to make it more noticeable, sorry for the inconvenience.
This worked great for me too. However, my screen lock sounds are now virtually non-existant. I can barely hear them and tried looking through other settings to try and make them louder, but can't seem to. I guess it fixed one problem and broke another.
Flashed through Recovery and now I'm getting a bootloop
Dork6243 said:
Does this really deserve to have its own thread? Why not put this in CM7 thread?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Seeing as how there are about 500 pages to the CM7 thread, it would he lost in the mix pretty quickly.
Sent from my ThunderBolt using XDA Premium App
chriskader said:
Seeing as how there are about 500 pages to the CM7 thread, it would he lost in the mix pretty quickly.
Click to expand...
Click to collapse
True, I guess searching is rather time consuming...
Sent from my ADR6400L using XDA App
Why the hell does it matter? God, people get so anal about forum posts.
Continue
Sent from my ADR6400L using XDA App
Worked perfectly for me as well. I use Audio Manager to manage my volume levels and noticed that before flashing this the "in call" volume max was 5. After flashing the max is now 15. Huge improvement!
WormDoes said:
Worked perfectly for me as well. I use Audio Manager to manage my volume levels and noticed that before flashing this the "in call" volume max was 5. After flashing the max is now 15. Huge improvement!
Click to expand...
Click to collapse
Is audio manager something available in the market? I am on gengeritis but would love to have something to boost my volume, specifically on speaker phone. It kills me to not be able to use it while in the car. If I can get much louder volume with this I might just have to wipe and flash CM7.
For some reason my in call audio only seems slightly louder. Everything else is definitely louder though. Is there something you can tweak to make in call volume louder?
Sent from my ThunderBolt using XDA App
Dork6243 said:
Does this really deserve to have its own thread? Why not put this in CM7 thread?
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
yes.
Sent from my phone that I can't hear calls on.
worked good for me! Thanks!
This worked for everything except my Bluetooth in-call volume?
Sent from my CM7 ThunderBolt using XDA Premium App
Modded default file a little to my liking volume wise, this is very much a work in progress, if your Transformer burns up a speaker or the sound card, don't hold me responsible, BUT on a good note it works for me and volume is very decently increased, so if your feeling lucky (punk) give it a try. You just might be pleased with the results. Good luck and happy modding! =]
Also as a side note, I have heard stories of blown left speakers, so be extra careful with the one with the speaker fix, as this is unexplored territory except from one user who did have good result's, so only use if you are aware that it may damage your HARDWARE for good...
Confirmed working on voodoo sound, but I would suggest using the medium one, no higher.
KEEP IN MIND THIS ALSO INCREASES HEADPHONE OUTPUT, BE CAREFUL SO AS TO NOT DAMAGE YOUR HEARING!!
This file was in the same folder, however I don't understand it's function, but incase you had it and erased it, here it is:
http://www.multiupload.com/EXJZ50M6IN
Original config file: http://www.multiupload.com/MRJ2V98G3W
Risky one (full output potential):http://www.multiupload.com/7L8S4I6GKF
Medium Risk one (Recommended): http://www.multiupload.com/WVKJVU5U7A
Risky one with speaker balance mod (SOMEWHAT UNTESTED!!): http://www.multiupload.com/61HP5V3M0U
Medium risk one with left speaker fix (ALSO UNTESTED!): http://www.multiupload.com/MFI035ZL65
You must reboot for the changes to apply.
If you take it for a spin, please post your opinions on sound quality and volume so others can get a good idea of what this file does
All credit to xda members freeza and verkion for the balance fix file, I simply edited his file.
Edit: you will find the stock file in system/data
Edit: Be sure to backup your original file, and if you don't know how to replace the file, you shouldn't be playing with this lol
Edit: If you hear distortion, lower the volume, as distortion will blow speakers faster than overpowering them
Also as a side note I run the full output one with good results, full volume is now usually to loud lol, does sound *SLIGHTLY* tinny, but once you get used to it, the increase in volume is worth the trade off, and if you miss the stock volume, either turn it down or re-apply your stock file.
If you like this, please click the thanks link =]
If you have any issues feel free to contct me at my personal email at [email protected], but only if it is important please.
DREWSASTER said:
I modded the default file a little to my liking volume wise, this is very much a work in progress, if your Transformer burns up a speaker or the sound card, don't hold me responsible, I am new at this afterall, BUT on a good note it works for me and volume is decently increased, so if your feeling lucky (punk) give it a try. You just might be pleased with the results. Good luck and happy modding! =]
http://www.multiupload.com/7L8S4I6GKF
Edit: you will find the stock file in system/data
also be sure to backup your original file
Click to expand...
Click to collapse
I advise people to be very careful with volume on transformer. I blew my left speaker using configs etc and just received my transformer back from warranty repair (thankfully fixed
I really dont advise using configs like this but there is a need to make volume higher.
I have tried everything and found the safest way which is what i use now is a small app from the market called 'VOLUME+' , link below.
I set my speakers to a +5 boost in options, nothing else and volume is much higher, crisp and safe.
snakeybidder said:
I advise people to be very careful with volume on transformer. I blew my left speaker using configs etc and just received my transformer back from warranty repair (thankfully fixed
I really dont advise using configs like this but there is a need to make volume higher.
I have tried everything and found the safest way which is what i use now is a small app from the market called 'VOLUME+' , link below.
I set my speakers to a +5 boost in options, nothing else and volume is much higher, crisp and safe.
Click to expand...
Click to collapse
I agree completely, and I also tweaked a few more things so it's still crisp and good sounding, it works for me, but everyone should be advised you might not be as lucky as me also.
Wouldn't it be wise then to create a few modified files and label them according to how safe they are? (eg. Dangerous, moderate, safe) that could potentially work...
Sent from my Desire HD using XDA Premium App
Gtj94 said:
Wouldn't it be wise then to create a few modified files and label them according to how safe they are? (eg. Dangerous, moderate, safe) that could potentially work...
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
I was actually going to get around to doing that today
Edit: done, no point in anything below medium, volume wouldn't be affected enough to really notice
Using risky one with speaker balance and working beautifully, now able to hear my netflix movies alot better
I have a question this is for speakers...while for headphones its voodoo sound?
also the medium risk one download link does not exist
cowballz69 said:
Using risky one with speaker balance and working beautifully, now able to hear my netflix movies alot better
Click to expand...
Click to collapse
Awesome, any *tinny* sounds? or is it decently clear?
Imppy said:
I have a question this is for speakers...while for headphones its voodoo sound?
also the medium risk one download link does not exist
Click to expand...
Click to collapse
Link fixed, I apologize, also this will work for headphones as long as you don't run voodoo sound, if you do I'm not to sure, but without voodoo sound it also boost's headphone volume as well, and quite a bit on that note while still retaining clarity.
I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.
does this boost vodoo sound further? lol...any people with vodoo sound and tested?
Imppy said:
does this boost vodoo sound further? lol...any people with vodoo sound and tested?
Click to expand...
Click to collapse
To be honest I don't know as I don't use voodoo sound, but I will edit the original post if I can confirm it work's with voodoo. So if you want you can test and report back, or just wait to see if someone else doe's first.
dazz87 said:
I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.
Click to expand...
Click to collapse
This also boost's headphone output so it wil increase the volume of your portable speakers as well, but possibly for the worse.
will report soon just used the medium risk one with voodoo sound
no distortion sound
compatible with vodoo sound...very loud in headphones when max amplifying with vodoo sound...no distortion whatsoever...amazing sound
I don't know if I should try high risk with vodoo sound...
dazz87 said:
I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.
Click to expand...
Click to collapse
That was my fear in releasing the one with the left speaker fix, but the bad is the only way to know how the file will afffect it is to wait to hear from more user's on the result's they have.
by the way we have to restart the transformer before it takes effect?
Imppy said:
will report soon just used the medium risk one with voodoo sound
no distortion sound
compatible with vodoo sound...very loud in headphones when max amplifying with vodoo sound...no distortion whatsoever...amazing sound
I don't know if I should try high risk with vodoo sound...
Click to expand...
Click to collapse
If it is loud enough I would suggest sticking with that one then, why take the risk?
Imppy said:
by the way we have to restart the transformer before it takes effect?
Click to expand...
Click to collapse
Yes you must reboot in order for the changes to apply.
DREWSASTER said:
If it is loud enough I would suggest sticking with that one then, why take the risk?
Click to expand...
Click to collapse
I didn't reboot, let me do the real testing now! lol
Imppy said:
I didn't reboot, let me do the real testing now! lol
Click to expand...
Click to collapse
Ok, I also edited the original post so everyone knows to reboot, sorry I didn't clarify that, let us know how it goes with whatever file you choose.
READ THE ENTIRE POST
original post here: http://forum.xda-developers.com/showthread.php?t=1308993
Just sharing the news.
smokin1337 said:
I personally didn't think beats was all that great but alot of users like it so i made this flashable version for my rom. Figure everyone else would enjoy it as well. It does replace some files though such as services.jar and framework.jar. I have only tested it with my rom but it should work with any rom but i suggest making a nandroid backup just in case.
This is the full beats with icons and eveything
Now with HotSpot working (Thanks Leoisright)
Sense Roms ONLY
Anyways just flash it in recovery and enjoy
Now has universal updater-script so it can be flashed on any device But probably will not work so try at your own risk !!
A few have reported that it flashes on other devices and it boots so it may just work on some.
This is developed for the Evo 3D it is on the portal and because of my title it says for ANY Sense rom but it was made for the 3d. but if you want to try it on other devices i strongly recommend a nandroid backup before testing. I'll be looking into the possibility of multiple devices soon. Sorry for the confusion..
If you are getting FC with Music try the FC-FIX and see if it works and post if it did or not. I am trying to figure out what the problem is
ORIGINAL Download (First boot may take some time, Be patient !!):
Beats-HotSpot-signed.zip - 7.9 MB
Click to expand...
Click to collapse
Here are links to the files with update-script for our phone that I know work.
Post in this thread only to confirm working and to discuss the effects. Post in the original thread for support.
WARNING:
1st boot will take extra time.
It might possibly screw up your phone. MAKE A BACK UP.
If your running a theme, ask your themer to incorporate this.
Dont ***** if it doesnt work.
Download ----
TB-Beats
TB-beats fix (only flash if you are seeing fc's in music app
I'm currently running gingeritis 3D and Chingy ported this over in his ROM, now I hear a slight difference but i assume by HTC it was made to best be heard using beats earphones/headphones. Have you tried this and confirmed it working?
Yeah. most are saying its best used with Beats headphones. But those already have amplified bass. So I dunno if they are just thinking it works better or not.
I cant flash it on my phone (well not yet at least) the stock music player wont load on my. I broke it somehow. . I do however own a set of very nice headphones that are better audio quality than 'Beats' but cant test the new audio stuff yet... Would be nice to get a little deeper bass with stock music app (once I reflash a clean ROM)
What difference did you notice?
bad4u6669 said:
Yeah. most are saying its best used with Beats headphones. But those already have amplified bass. So I dunno if they are just thinking it works better or not.
I cant flash it on my phone (well not yet at least) the stock music player wont load on my. I broke it somehow. . I do however own a set of very nice headphones that are better audio quality than 'Beats' but cant test the new audio stuff yet... Would be nice to get a little deeper bass with stock music app (once I reflash a clean ROM)
What difference did you notice?
Click to expand...
Click to collapse
a very slight difference on stock ported gingeritis, but when time permits I'll make a backup and flash this and test it out. Hope someone has tried or is trying this and keep us informed, I also read from adrynalyne that 95% of the beats ports where fake so...I'm not sure if this on a software level or if this includes hardware.
Most people commenting in the original thread are saying they hear a difference. But it might be all in their head.
As far as trying this out, he stated this was is based off desire HD roms because of the sense 3.0. And Im pretty sure our roms are also based off the Desire HD rom for the sense 3.0. So theoretically it should work... but we all know how well those go... Hense all the warnings i put in the OP.
All it is is some compression and.altered eq...maybe a bit of gain....on a pair of studio monitors it.makes everything sound ****ty but for a pair of cheapo headphones it might have some benefit, I also noticed it accentuated audio clicks, glitches, things that overshadow the whole objective of the app/dsp in the first place.
Sent from my HTC ThunderBolt using xda premium
The CPU usage is also unreasonable.
Sent from my HTC ThunderBolt using xda premium
This is kind of useless unless you have a beats optimized output device
You should have killed me, when you had the chance
Read this
http://www.engadget.com/2011/10/13/htc-sensation-xe-with-beats-audio-review/
Go to the software part, it tells you pretty much what "beats audio" does to the output. That being said, I have a pair of beats pro's and *maybe* noticed a tiny difference at the most. Most likely all this does is take the stock EQ and bump it up in certain places, if it actually does anything at all.
No go on synergy r267. Shows install went ok. Cleared davlik and cache.
Sent from my ADR6400L using Tapatalk
shadowpunx said:
This is kind of useless unless you have a beats optimized output device
You should have killed me, when you had the chance
Click to expand...
Click to collapse
that made me LOL. Beats optimized output device...? So... over priced headphones?
I tried the beat mod on chingys Gingeritis. It does slightly increase the mid bass. That was the most noticeable change, well besides the fact it also greatly increases the hi's so the sound doesn't become muddy. And as stated before you will definitely hear crackling on max volume.
I have played audio out both to my car stereo via head phone jack and to my headphones (definitely not cheapys, and better than any "optimized beats equipment") Its all the same noticeable difference. I haven't tried on my cheap ear buds yet, but will give them a good run tomorrow when I take my street bike out for a Sunday put put.
Using this mod does disable the stock EQ that is built into htc music app. or at least it did on my phone.
I will officially classify this mod as 80% hype and 20% function.
If you have anything professional you wont need to eq anything that was recorded and mastered properly. I promise.
Sent from my ADR6400L using Tapatalk
Its not like I need more bass or high end out of a radiohead album, the Guy who's best at deciding the equal of everything already determined that. All of this post processing bull**** is just to make wank headphones sound "Fuller" "richer" but by no means more accurate, and to be honest a complete waste of CPU.
Sent from my ADR6400L using Tapatalk
bad4u6669 said:
that made me LOL. Beats optimized output device...? So... over priced headphones?
Click to expand...
Click to collapse
I wrote this on rootz, figured I would share it here too.
People seem to forget what beats are about. They don't make the music sound "better" they make it sound "clearer". You want "better" sounding music then yes, the others do a good job of that. But if you want to hear the music, how it sounds to artists in a studio, without extra filters, eq's, etc. put on by Bose, Sony, and the other manufacturers, then Beats are the way to go. I'm going to guess none of you have ever been inside a real studio (not your friend's basment with a mic and a padded wall, that isn't a studio) so you saying that beats don't do this, and are all marketing bs, don't really know what you are talking about.
I have had the Solos, sold them and got the Studio's, and sold them and now have the Pro's and I can say I have never heard music clearer before than I have with these. Want to know why the base sounds "deeper" or the treble is "louder" with other headphones? Because that's how they are made. Beats are made to sound exactly how the artist made the song in the studio and wanted people to hear it.
/endrant
I am an audio production major, my school has a multi million dollar studio and no one uses beats. AKG, SENNHEISER, AUDIO TECHNICA are the three major brands for lower end accurate audio reproduction. Truly "clear" headphones are electrostatic such as the ~$1000 stax in Japan, they require their own amp. I think its hillarious that you think beats (which have over accentuated lows and highs...to give compressed music come off of a ****ty audio driver (like the tbolt) a bigger richer sound? More accurate? Absolutely not recessed mids are guarunteed when you "eq" a set of headphones like beats chose to do. The most hillarious part is were in a discussion thread talking about a plugin that does that same eq/compression/gain bull**** and above poster is repping beats to be about accurate sound reproduction. You obviously know a lot less about audio than you pretend to....
Sent from my ADR6400L using Tapatalk
Not to mention with all of the money they put towards marketing, Justin bieber beats, p diddy beats, lady GaGa beats....its obvious that its directed at the commercial consumer market, NOT FOR THE AUDIOPHILE/PRODUCER. Go test a pair of ATH-M50s if you don't believe me...
Sent from my ADR6400L using xda premium
Case and point, beats useless, if you really know how you want your music to sound use playerpro with dsp pack, if your getting cracking, then lower your preamp and get a better output. My brother works the sound board for the starland ballroom in nj, very big venue, and I'm assistant production manager. We have had everyone from Justin bieber to as I lay dying. Beats that you guys are using isn't even the true beats that comes with whatever phones its coming with these days. Do some research and you'll find that out
You should have killed me, when you had the chance
And what I mean by beats optimized is its set up to work best with the way beats headphones are set up...is that alittle easier to understand?
You should have killed me, when you had the chance
Who would like to see this running stock? Or who would like this to be as senseless as possible and still run beats audio with Miui launcher?
Beats audio doesn't even work with any evo4g rom .......
Sent from my PC36100 using XDA App
Also if it was stock it wouldn't be a "Warm" rom
Sent from my PC36100 using XDA App
What? 2 posts and neither make sense what exactly are you asking? Beats requires hardware to fully function you only get partial functionality with the Beats app and a beats enabled kernel, for true beats you need a beats enabled audio processor along with the software and it's overrated unless you listen to alot of rap/hip-hop r&b or pop, rock doesn't sound that great on it I have a laptop with a beats audio processor, beats speakers and beats headphones, sounds great when I listen to rap/r&b but southern rock and metal sound like total crap and way over bassed
We are legion, for we are many.
What I am getting at is gutting as much as you can of sense and leaving whats required for beats to work and you are mistaken because beats works on warm 2.3 you can enable and disable and difference is night and day? I apologize for any confusion. Also by stock I mean the way it was released to us. That should have been obvious.
rombold said:
What I am getting at is gutting as much as you can of sense and leaving whats required for beats to work and you are mistaken because beats works on warm 2.3 you can enable and disable and difference is night and day? I apologize for any confusion.
Click to expand...
Click to collapse
It doesn't work when you enable beats it goes into a debugging mode the true effect is not there
Sent from my PC36100 using XDA App
it has worked on mine I can enable and disable get sound from both and as mentioned sound is night and day. It might not work to my knowledge but something is working with it because there is a huge difference in clarity.
rombold said:
it has worked on mine I can enable and disable get sound from both and as mentioned sound is night and day. It might not work to my knowledge but something is working with it because there is a huge difference in clarity.
Click to expand...
Click to collapse
It might sound somewhat "better" but it doesnt work fully like if you had a 3vo you could tell the difference from our "beats" compared to ours
Sent from my PC36100 using XDA App
I love the feel of Miui and would like a gutted warm 2.3 cooked up with the min req for the beats to function as it is currently thats what i am getting at. Anyone wanna cook this up?
rombold said:
I love the feel of Miui and would like a gutted warm 2.3 cooked up with the min req for the beats to function as it is currently thats what i am getting at.
Click to expand...
Click to collapse
Just install the miui launcher on xda delete Rosie.apk and lock screen and remove Widgets and that's it
Sent from my PC36100 using XDA App
That's more or less what I did but I feel like someone who is more familiar with dissection a rom would be able to remove all the unnecessary apks. That and miui rom and launcher differ quit alot I would want as much miui integrated. basically a hybrid sense aosp of some sorts
rombold said:
That's more or less what I did but I feel like someone who is more familiar with dissection a rom would be able to remove all the unnecessary apks
Click to expand...
Click to collapse
Can probably expect someone to do it later since its only had one release so when it gets a couple more updates someone will jump in most likely
Sent from my PC36100 using XDA App
Omg beats requires hardware as well as software for full functionality you can get the same effect as beats on an evo4g with proper eq settings trust me beats on the evo4g doesn't sound anything like the real deal real beats with hardware sounds like a studio with huge subwoofers trust me my laptop was close to 2grand and my headphones were 185 I know what real beats sounds like personally I wish I had bought the Bose audio driver laptop and the Bose noise cancelling headphones instead cuz I don't even use the beats that much I ususally use winamp pro with custom eq settings to listen to a mix of music I only turn on beats when I'm listening to all rap/r&b
We are legion, for we are many.
http://www.dshack.net/2011/10/what-the-heck-is-beats-audio.html
That page has images of what the beats "audio processor" does. Basically it's an eq, with good marketing. It's all going to depend on the quality of the headphones you are using also. You can create similar results using any eq. But as Evil said, true beats requires hardware and kernel support our evos do not have. Would you like some tips on recreating the beats sound with any eq?
Edit: Google the equal loudness curve. It's an eq setting most people find quite pleasing.
And remember people your audio is only going to be as good as your cheapest or crappiest piece in the system. I.e. $5000 speakers through a $500 amp or cheap ass cables won't sound like$5000 speakers.
Boo
I just installed this and it looks very cool, but it's pretty overwhelming. Any suggestions for which .IRS files work well with headset, speaker, and bluetooth headset? For bluetooth headset I've also got my regular mono one for phone calls, and I have a stereo bluetooth one from Jaybird so I'd assume they use different settings. Speaking of, what do you guys put the settings at as well.
I looked a bit at the Viper4android thread, but it's like 700 pages long.
Before you get you A$$ handed to you for not following the rules i will spare you the moment of humility and provide you with this since i was stuck in the same situation you were but simply went to google and entered "Viper4android settings" and stumbled upon this which HELPED me!!!!!
http://vipersaudio.com/blog/
Hope it helps you like it did me
go to bob's diner. food is great
bckrupps said:
go to bob's diner. food is great
Click to expand...
Click to collapse
Agree with you 100%!!! Tuna melt with waffle fries,cant be beat hahahahahahaha
solrac.dc said:
Agree with you 100%!!! Tuna melt with waffle fries,cant be beat hahahahahahaha
Click to expand...
Click to collapse
left myself logged in. i have wise guy roommates. at least they didnt post something that would get me tossed outta here
solrac.dc said:
Before you get you A$$ handed to you for not following the rules i will spare you the moment of humility and provide you with this since i was stuck in the same situation you were but simply went to google and entered "Viper4android settings" and stumbled upon this which HELPED me!!!!!
http://vipersaudio.com/blog/
Hope it helps you like it did me
Click to expand...
Click to collapse
Oh, I didn't realize I was breaking a rule. You mean we can't discuss optimal settings for an app for our phones? The only rule I see that might be loosely tied is using search, but I have searched. I have searched and am aware of the main 700 page thread, and also the English viper website, none of these have users discussing the G2 specifically. I'd rather avoid that 700+ page thread since I am specifically asking about the G2 in the G2 forums and what settings work well for others.
Just to repeat, I'm not looking on how to get the program to run or install it, I am looking for other G2 owners feedback on which particular modes worked well for them. I thought it might be a nice discussion.
If I'm breaking the rules please delete my thread then, my apologies.
Moving on..
I don't use the bluetooth headset so I can't help you on that.
But for the headset, I realised that using the xHifi setting under clarity gives quite a little whitenoise. But not using makes your music sound muffled , so I guess it's a trade off(unless you know how to configure the IRS files). I am using my mid range sennheiser CX-300II without any IRS filters, cos none of them work well. You could try loading everything into the folder and going through them 1 by 1, or even making the file which is rather tedious. I couldn't be bothered, the playbackgain control and dynamic system is enough for me.
If you plug your phone into powerful speakers (I have a bose 321 but damn those things make the windows shake) you MUST turn off the VIPER bass and reduce the dynamic bass to ~15%. Differential surround(Haas effect) makes the sound sound off center on speakers so avoid it.
I noticed G2 doesn't have music effect setting, am i suppose to assume that viper is on?
No it's not that simple. What I did was:
1. Install the drivers
2. Backup build.prop then change the lines specified in the main thread for Viper
3. Install google play(doesn't work on stock LG player for me)
3b. (unsure if really necessary) Disable stock LG player
4. Reboot
5. Wait for boot to complete and see all the superSU permission flashing...
6. Play something, then go into viper, enable the first option on the speaker tab and check the "driver status". It should say that it is installed/normal, that it is enabled and that it is processing. To really be sure go play around with the settings but be careful with the gain (don't ramp it sky high and drop your phone in shock)
Sent from my ASUS Transformer Pad TF300T
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
check out the V4A audio profiles... it gives a great shares from people on settings... try them and check out the one you prefer
EniGmA1987 said:
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
Click to expand...
Click to collapse
Yeah I don't know how happy I am with this app yet. I can get stuff louder, but I hear more distortion, but I have to play around a bit. One odd thing is that different things have different volumes after installing this. For example, my speaker phone when in a call is nice and loud, but when checking voicemail it is very quiet, kind of odd and I can't figure out how to selectively fix these things so I may be forced to uninstall.
EniGmA1987 said:
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
Click to expand...
Click to collapse
spinedoc said:
Yeah I don't know how happy I am with this app yet. I can get stuff louder, but I hear more distortion, but I have to play around a bit. One odd thing is that different things have different volumes after installing this. For example, my speaker phone when in a call is nice and loud, but when checking voicemail it is very quiet, kind of odd and I can't figure out how to selectively fix these things so I may be forced to uninstall.
Click to expand...
Click to collapse
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
android404 said:
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
Click to expand...
Click to collapse
Think what you want but the drivers this uses noticeably took away from clarity in all aspects of the sound. Every speaker setup can sound different so maybe this type of sound just works better for you, my high end systems though it definitely takes a lot away from the audio
android404 said:
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
Click to expand...
Click to collapse
That's good news to me. Can you post up exactly what settings, .irs files,etc you have? I'd be most interested in phone-speaker settings, but I wouldn't mind just piggybacking off you since you say you have such stellar results.
EniGmA1987 said:
Think what you want but the drivers this uses noticeably took away from clarity in all aspects of the sound. Every speaker setup can sound different so maybe this type of sound just works better for you, but high end sound systems will notice the quality reduction.
Click to expand...
Click to collapse
neither am I nore do I have a high end soundsystem so I don't notice the difference to the worse. Who listens to anything on a high end soundsystem through a phone?
On my dynavoice speakers and my b&w headphones my music gets several different new dimensions using viper, regardless of the code of the driver.
Edit: of course every setup and every set of ears gets different subjective results. But it's so obvious that the sound is so much better with viper
android404 said:
neither am I nore do I have a high end soundsystem so I don't notice the difference to the worse. Who listens to anything on a high end soundsystem through a phone?
On my dynavoice speakers and my b&w headphones my music gets several different new dimensions using viper, regardless of the code of the driver.
Edit: of course every setup and every set of ears gets different subjective results. But it's so obvious that the sound is so much better with viper
Click to expand...
Click to collapse
So can you post up your settings or no?
spinedoc said:
So can you post up your settings or no?
Click to expand...
Click to collapse
You got a pm right after you asked me yesterday.
Edit: no you didn't. Must have gone wrong, is coming soon.
---------- Post added at 12:26 AM ---------- Previous post was at 12:13 AM ----------
spinedoc said:
So can you post up your settings or no?
Click to expand...
Click to collapse
This is my headphones profile. I haven't set up one for the phone speakers. It's a modified copy of something I found somewhere on xda. I guess you can just create a headphone profile yourself and then copy in the following text instead of what it says in your backed up profile. But I'm not sure if that will work or if it will destroy your phone and kill your family. You will find your profiles (once they are backed up) under storage/emulated/0/viper4android/profile. This works on my headphones and with my ears, that doesn't mean it will work for you. Here it goes:
# ViPER4Android audio effect profile !
# Created 2013-10-21 12:15:33
profile_name=piggyback
viper4android.headphonefx.enable=boolean=true
viper4android.speakerfx.enable=boolean=false
viper4android.headphonefx.playbackgain.enable=boolean=false
viper4android.headphonefx.fireq.enable=boolean=true
viper4android.headphonefx.convolver.enable=boolean=true
viper4android.headphonefx.colorfulmusic.enable=boolean=false
viper4android.headphonefx.diffsurr.enable=boolean=false
viper4android.headphonefx.vhs.enable=boolean=false
viper4android.headphonefx.reverb.enable=boolean=false
viper4android.headphonefx.dynamicsystem.enable=boolean=false
viper4android.headphonefx.dynamicsystem.tube=boolean=false
viper4android.headphonefx.fidelity.bass.enable=boolean=true
viper4android.headphonefx.fidelity.clarity.enable=boolean=true
viper4android.headphonefx.cure.enable=boolean=false
viper4android.headphonefx.playbackgain.ratio=string=50
viper4android.headphonefx.playbackgain.maxscaler=string=200
viper4android.headphonefx.playbackgain.volume=string=80
viper4android.headphonefx.fireq=string=4.5;4.5;2.75;0.0;0.0;0.0;0.0;-0.5;2.75;4.0;
viper4android.headphonefx.fireq.custom=string=4.5;4.5;2.75;0.0;0.0;0.0;0.0;-0.5;2.75;4.0;
viper4android.headphonefx.convolver.kernel=string=/storage/emulated/0/ViPER4Android/Kernel/B&W Stereo Core.irs
viper4android.headphonefx.colorfulmusic.coeffs=string=120;200
viper4android.headphonefx.colorfulmusic.midimage=string=150
viper4android.headphonefx.diffsurr.delay=string=500
viper4android.headphonefx.vhs.qual=string=3
viper4android.headphonefx.reverb.roomsize=string=0
viper4android.headphonefx.reverb.roomwidth=string=0
viper4android.headphonefx.reverb.damp=string=0
viper4android.headphonefx.reverb.wet=string=0
viper4android.headphonefx.reverb.dry=string=50
viper4android.headphonefx.dynamicsystem.coeffs=string=180;5800;55;80;10;70
viper4android.headphonefx.dynamicsystem.bass=string=5
viper4android.headphonefx.fidelity.bass.mode=string=0
viper4android.headphonefx.fidelity.bass.freq=string=100
viper4android.headphonefx.fidelity.bass.gain=string=150
viper4android.headphonefx.fidelity.clarity.mode=string=2
viper4android.headphonefx.fidelity.clarity.gain=string=150
viper4android.headphonefx.cure.crossfeed=string=0
viper4android.headphonefx.outvol=string=100
viper4android.headphonefx.channelpan=string=20
viper4android.headphonefx.limiter=string=100
viper4android.speakerfx.limiter=string=100
TY much, I'll give it a shot!!!