Hi all.
I merged the stock notification of XWJS8 with XWJS1.
So, Install it and your SGS notificication bar will have the stock Gingerbrea
d XWJS1 look.
See the screenshots below:
To install on Froyo XWJS8:
-Replace your framework with one attached here.
-Reboot
I tested it overs 2 days, no crash, no FC.
2011-03-22:
Updated with stock Gingerbread icons for
- Data G/3G/H
- Vibration
Enjoy,
Eric inSrilanka
Eric,
looks great. I'd love to install this but can't see an attached file...
The upload took a long from sri lanka.
The framework is attached now.
Eric.
Thanks Eric - this worked a treat.
But how can I replace the file? I tried before but I could not...
aloserstory:
Your phone need to be rooted.
How did u try to replace the .apk ? Shell or tools?
Eric,
In Sri Lanka.
do i have to use adb push thing to replace it?
Plz can u give a small guide of how to replace it
Sorry new to android(yet learning )
aayyaanna said:
do i have to use adb push thing to replace it?
Plz can u give a small guide of how to replace it
Sorry new to android(yet learning )
Click to expand...
Click to collapse
At just a guess you should be able to use Root Explorer instead of ADB
This mod makes a few things black, eg the email message list, and bootup before the wallpaper loads, but looks ok, thanks.
Sent from my GT-I9000 using XDA App
aayyaanna said:
do i have to use adb push thing to replace it?
Plz can u give a small guide of how to replace it
Sorry new to android(yet learning )
Click to expand...
Click to collapse
adb push is very easy to handle:
adb push <local dir> <remote dir>
so first thing you put the framework-res.apk into the folder
where your adb.exe is located. then navigate to that folder
using the console (cmd).
then just type this:
Code:
adb push framework-res.apk /system/framework
this will replace it in a very quick way. be sure to make a backup
of your old framework-res.apk in case you might need it again later ;-)
aayyaanna said:
do i have to use adb push thing to replace it?
Plz can u give a small guide of how to replace it
Sorry new to android(yet learning )
Click to expand...
Click to collapse
I use battery icon mod to change framework.res needs root
Sent from my GT-I9000 using XDA Premium App
i found this with adb shell:
#busybox mount -o remount,rw /system (or mount -o ro,remount -t yaffs2 /dev/block/mtdblock3 /system if there's no busybox)
#rm /system/framework/framework-res.apk
#cp /sdcard/framework-res.apk /system/framework/framework-res.apk
#chown root.root /system/framework/framework-res.apk
#chmod 644 /system/framework/framework-res.apk
#reboot
but when i try to copy the file with adb it says there is not enough space, is it bigger than the froyo framework-res.apk?
Are you using lagfix, with what pit file have u flashed?
I think the battery image is changed, how about the 3G mark "H"?
XXJV1 has different "H" mark as i saw it before.
ttsunny said:
I think the battery image is changed, how about the 3G mark "H"?
XXJV1 has different "H" mark as i saw it before.
Click to expand...
Click to collapse
Thats the Point, the Images for "H" and "3G" weren't in the Framework.res.
That are just the old images form Froyo.
Hi Chikess, ttsunny,
You are right.
I noticed that and i made an update.
I uploaded the new version with a screen capture .
You can re-download the framework from post #1.
By the way:
Anyone tried the modded browser that I published on the previous post ?
Eric,
In Sri Lanka.
Related
OK so I installed the latest CM6.1 Nightly and was able to backup and then restore both QuickOffice and Swype. NOTE: I am NOT providing any apks for backup purposes or if you somehow lost yours. These are merely directions for how to get Swype/QuickOffice off your phone and back on.
BACKUP:
(In a terminal w/ ADB)
Code:
adb pull /system/app/Swype.apk .
adb pull /system/app/Quickoffice.apk .
adb pull /system/lib/libSwypeCore.so .
After installing a custom ROM....
Code:
adb install Quickoffice.apk
adb push libSwypeCore.so /system/lib
adb install Swype.apk
tuzonghua said:
I was wondering if it is possible to pull the Swype/QuickOffice .apk's from my G2 (currently stock ROM), flash a custom ROM (say, Desire Z or CM6), and then re-install those .apk's. I figure it will throw some kind of error (e.g., Swype will say it's not configured for my device) because of different ROMs but just thought I'd ask.
I know how to pull, push, and install apk's from ADB so I'm not asking for how to do it. Just if it is possible.
Click to expand...
Click to collapse
I would love to know this as well. If you figure it out would you mind PMing me the details on how to do it?
Once a more stable version of CM6 or some other ROM comes out, I'll be trying it myself. Just as a reference, the ADB commands for doing this are:
Code:
C:\>adb pull /system/app/Swype.apk
C:\>adb pull /system/app/Quickoffice.apk
then after installing a custom ROM...
Code:
C:\>adb install Swype.apk
C:\>adb install Quickoffice.apk
I was able to use ES File Explorer and press menu>manager>app manager> then long press the Quick office app to back it up to the SD card, still trying to find the Swype apk though, going to do some digging with SUFBS (another file manager) and see if I can't get a hold of the Swype apk
This would be pretty awesome once we figure this out. Using Swype is the main reason why I'm still on the stock ROM. I tried out Sense and if it can come with Swype, I'll be one happy camper.
Did anyone try the above poster's method on pulling the apk?
Sent from my T-Mobile G2 using XDA App
tuzonghua said:
Once a more stable version of CM6 or some other ROM comes out, I'll be trying it myself. Just as a reference, the ADB commands for doing this are:
Code:
C:\>adb pull /system/app/Swype.apk
C:\>adb pull /system/app/Quickoffice.apk
then after installing a custom ROM...
Code:
C:\>adb install Swype.apk
C:\>adb install Quickoffice.apk
Click to expand...
Click to collapse
Quickoffice will work, but Swype will not. Swype has some libraries that you have to copy as well. Beyond that, I've not tested it. Find those Swype specific libs in the stock ROM and copy them as well, and maybe you might be ok.
Any chances you guys can send me the original Swype.apk that pre-installed on the G2? I stupidly deleted it off while doing Titanium things. Thanks.
See the post above from Dyndragon. I don't know what specific libs also go with Swype so the apk alone won't be enough.
Sent from my T-Mobile G2 using XDA App
tuzonghua said:
BUGS:
- Cannot use voice input with Swype after restoring to custom ROM
Click to expand...
Click to collapse
This is working fine for me on the CM 12 nightly. I used the same steps as you so try it with that?
Is there a way to get these files from a backup without having to back up the CM rom and then restore the stock, grab the stuff, and then go back to cm rom?
Sent from my T-Mobile G2 using XDA App
Popokrew,
No, AFAIK, and I cannot provide them here.
root file explorer
/system/app long click and copy what u wanna backup.
Sent from my T-Mobile G2 using XDA App
tuzonghua said:
Popokrew,
No, AFAIK, and I cannot provide them here.
Click to expand...
Click to collapse
No worries. Ill restore the backup, grab it, and go back to cm once the RC comes out. I noticed the google apps are also missing and I know cm can't provide those so I'm sure there is a backup procedure for them.
Sent from my T-Mobile G2 using XDA App
Hey guys, I was able to back everything up and while I was able to install the swype apk, whenever I go to copy the libswypecore.so file I have issues. Both through adb and root explorer. Any ideas? I'm going to attempt to do it through an update.zip + clockwork recovery now
tuzonghua said:
OK so I installed the latest CM6.1 Nightly and was able to backup and then restore both QuickOffice and Swype. NOTE: I am NOT providing any apks for backup purposes or if you somehow lost yours. These are merely directions for how to get Swype/QuickOffice off your phone and back on.
BACKUP:
(In a terminal w/ ADB)
Code:
adb pull /system/app/Swype.apk .
adb pull /system/app/Quickoffice.apk .
adb pull /system/lib/libSwypeCore.so .
After installing a custom ROM....
Code:
adb install Quickoffice.apk
adb push libSwypeCore.so /system/lib
adb install Swype.apk
Click to expand...
Click to collapse
Ok, I got it, I'm not sure if everyone has to do this or if it was just an oddity for me but
A. For those that quickly jumped on the rom band wagon without thinking about backing up swype. You can just open any g2 stock rom as an archive and get the files from it.
B. This is what I had to do to install it.
Turn it from Read-Only to Read/Write
Code:
adb shell
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then you have acess to the system folder to copy the swype lib file so...
Code:
adb install Quickoffice.apk
adb push libSwypeCore.so /system/lib
adb install Swype.apk
[/QUOTE]
Then close that access up
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
And your good to go.
REMEMBER SWYPE WILL NOT FUNCTION WITHOUT THAT LIB FILE!
If you are already on the custom rom and don't have the files, you can grab the files from the stock rom posted in this forum.
Sent from my T-Mobile G2 using XDA App
adb wont let me adb push libSwypeCore.so /system/lib . Says it is read only. I just installed cm6.1 and would like to have swype back.
Thanks for any help.
popokrew said:
If you are already on the custom rom and don't have the files, you can grab the files from the stock rom posted in this forum.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
And where is this located?
i got this to install. but when i go to use swype it says something about i cant use this version of swype with this phone.... do anyone know anything about this? if you do post some info. thanks!
i'm using the g2 with sense ui.
shaneleelevin said:
Ok, I got it, I'm not sure if everyone has to do this or if it was just an oddity for me but
A. For those that quickly jumped on the rom band wagon without thinking about backing up swype. You can just open any g2 stock rom as an archive and get the files from it.
B. This is what I had to do to install it.
Turn it from Read-Only to Read/Write
Code:
adb shell
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Then you have acess to the system folder to copy the swype lib file so...
Code:
adb install Quickoffice.apk
adb push libSwypeCore.so /system/lib
adb install Swype.apk
Click to expand...
Click to collapse
Then close that access up
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
And your good to go.
REMEMBER SWYPE WILL NOT FUNCTION WITHOUT THAT LIB FILE![/QUOTE]
Just FYI, you don't need all the extra stuff when you're remounting /system, you can just say
Code:
mount -o remount,rw /system
It already knows where it's mounted from and what it is, neh?
Also, I have a Swype Beta login, so I wanted to install the newest beta, and before you can install with the Swype Installer, you have to delete /system/app/Swype.apk and /system/lib/libSwypeCore.so both before the new beta runs right (if you leave the library it just FCs as soon as you enable it).
It doesn't fit the screen.. Pls help!
Sent from my GT-P1000 using Tapatalk
I bet there's already the solution somewhere on the forum, but Ill try to make it simple for u..
Basically u need to mount the factoryfs.rfs image of the JMK5 fw, on linux u can use the mount command tool, if on windows MagicISO would be the way to go. Once its mounted you need to copy the file Swype.apk from /app and libSwypeCore.so from /lib . Once you have them on ur computer all you have to do is to copy them into the Gtab, Ill post you the procedure step by step
Code:
adb shell
mount -o remount,rw -t rfs /dev/block/stl9 /system
chmod 777 /system/app
chmod 777 /system/lib
cd /system/app
mv Swype.apk Swype.apk.old
cd /system/lib
mv libSwypeCore.so libSwypeCore.so.old
exit
then from ur computer navigate to the folder where u have the files Swype.apk and libSwypeCore.so, then
adb push Swype.apk /system/app/
adb push libSwypeCore.so /system/lib/
adb reboot
Once it reboots you'll have the old nice Swype keyboard in replacement of the new small one...
To make it even easier I am uploading the files needed for the fix right below..
Enjoy ..
Nice! After I flashed Roto jme and discovered the swype issue, I reflashed the stock t-mo tom, grabbed those files, then reflashed Roto jme. Then I pushed those files and had the big keyboard back. Then I saw Mr. Roto made a v3b with the big keyboard! I could have been outside smoking a good cigar waiting for the upgrade!
So go get the v3b upgrade and flash that, unless you are looking for an adventure.
P.S. Reboot a few times if you do the file switching to make the changes take effect.
Well, unless you don't mind reflashing your tab and might lose apps and configurations this will take you few minutes. However I'm glad he has made a pre fixed keyboard version of the JME, defo easy way for everyone.
Sent from my GT-P1000 using XDA App
Segnale007 said:
To make it even easier I am uploading the files needed for the fix right below..
Enjoy ..
Click to expand...
Click to collapse
I suggest you take down those links before you get moderated!
See here.
Regards,
Dave
Segnale, you definitely want to remove those files from here. By the way the whole procedure can be done within the phone :
1. Download the files to your tab (before they are removed , ) using your browser
2. Use Androzip to unzip the files
3. Rename the original files of your tab with RootExplorer (just in case you want to reuse them)
4. Copy the downloaded unzipped files to their respective locations with RootExplorer
5. Reboot the system
P_
Or just flash the latest "update" from Rotohammer as it fixes the issue.
knightnz said:
Or just flash the latest "update" from Rotohammer as it fixes the issue.
Click to expand...
Click to collapse
But brings another one for us European users as his Swype only contains English & Spanish keyboards
Thanks a lot mate you saved my day.
Hi guys
I'd manage to manually deodex the app and framework file from my stock rom. The problem are I can't push them either thru adb nor update.zip. Been googling around but can't really get a correct adb command for sgs. I need to push these files so that I can install themes. Anybody who can guide please help. Thanks in advance.
You need super user permission to push things into read only memory. So you would need to go through adb shell, mount whatever folder framework is in to readable, etc.
snapper.fishes said:
You need super user permission to push things into read only memory. So you would need to go through adb shell, mount whatever folder framework is in to readable, etc.
Click to expand...
Click to collapse
Hi snapper.fishes
By the way, I got superuser permission. The only problem I don't know the correct command for the adb shell - su - mount etc, etc....
This are the command I got from Droid forum but it does not work for SGS I guest.
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
Anybody got any idea?
Try this:
adb shell
su
mount -o rw,remount /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount /system
reboot
Sent from my GT-I9000 using XDA App
g00ndu said:
Try this:
adb shell
su
mount -o rw,remount /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount /system
reboot
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for the tips g00ndu. If I push those deodex file, they will overide and delete all the odex file right? Should I disable the universal lagfix first and is it safe pushing deodex file this way?
angiogram said:
Thanks for the tips g00ndu. If I push those deodex file, they will overide and delete all the odex file right? Should I disable the universal lagfix first and is it safe pushing deodex file this way?
Click to expand...
Click to collapse
I say remove the lagfix first. It's not necessary, but if you do screw up your phone you are going to have to reflash your phone, and the last thing you want to do is to flash your phone with lagfix on.
angiogram said:
Thanks for the tips g00ndu. If I push those deodex file, they will overide and delete all the odex file right? Should I disable the universal lagfix first and is it safe pushing deodex file this way?
Click to expand...
Click to collapse
It's been a long time since I pushed files this way. Right now I'm using update zips and flash it via ulfk. Reason: it is much more simpler and more effective. If I remember correctly, your apk files need to be deleted too before you can push your deodexed apks and jars files to the system folder if you do it via adb.
Besides, I would not advocate this method of pushing through adb, bcos, there is always chances that your /system, /data partitions may result in data corruption.
Try using update zip.
Sent from my GT-I9000 using XDA App
g00ndu said:
It's been a long time since I pushed files this way. Right now I'm using update zips and flash it via ulfk. Reason: it is much more simpler and more effective. If I remember correctly, your apk files need to be deleted too before you can push your deodexed apks and jars files to the system folder if you do it via adb.
Besides, I would not advocate this method of pushing through adb, bcos, there is always chances that your /system, /data partitions may result in data corruption.
Try using update zip.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for your reply g00ndu. I've already try that. But after the zip file updated nothing happen. Maybe the zip creator that I use is not compatible with sgs. Can you kindly link to the correct source for sgs. Or maybe you can post the file and tutorial here so that we can learn the correct method from you. Thank you so much for that.
Anybody can help?
Deodexing Your Device - Full Step By Step Tutorial
angiogram said:
Hi guys
I'd manage to manually deodex the app and framework file from my stock rom. The problem are I can't push them either thru adb nor update.zip. Been googling around but can't really get a correct adb command for sgs. I need to push these files so that I can install themes. Anybody who can guide please help. Thanks in advance.
Click to expand...
Click to collapse
angiogram said:
Thanks for your reply g00ndu. I've already try that. But after the zip file updated nothing happen. Maybe the zip creator that I use is not compatible with sgs. Can you kindly link to the correct source for sgs. Or maybe you can post the file and tutorial here so that we can learn the correct method from you. Thank you so much for that.
Anybody can help?
Click to expand...
Click to collapse
Hey angiogram... I'm not sure if this thread still has a pulse, but I came across this thread and feel confident I can offer you some great information.
g00udu was on the right track, only one small detail I would add is reverting the permissions back to the system files once returned to the system directory.
See this link http://forum.xda-developers.com/showthread.php?t=990238
for an extremely detailed step by step how to perform this process from beginning to end.
If this issue has been resolved, keep it for future reference or pass it on to someone who you believe it may help.
Peace-
Thanks Liv33vil.
Sent from my GT-I9000 using XDA Premium App
Hello All.
Here are the framework-res.apk and build.prop files for the Optimus One, Stock 2.3.3 firmware. All you need to do is replace those files and you will get the CRT ScreenOff effect
I used the post by Skynet28, modified a little to only use adb commands.
This was the first thing done after rooting the phone.
-NEEDED:
Rooted phone
.7Z file View attachment 949259
5 Minutes of your time
NOTE: YOU WILL MOST PROBABLY LOOSE YOUR PHONEBOOK, I DID WHILE DOING ALL THIS. PLEASE BACK THAT UP.
The procedure to install is as follows:
You must set the /system on the phone with RW permision
From a Command Prompt:
First we locate where /system is mounted
Code:
adb shell
su
cat /proc/mounts
Locate /system in the mount and write down the mountpoint (mtdblock1 or similar)
the type
Code:
mount -o rw,remount /dev/block/[I][COLOR="Purple"]MOUNTPOINT[/COLOR][/I] /system
exit
exit
Then we push both files to the phone with the folowing adb command
Code:
adb push framework-res.apk /system/framework
adb push build.prop /system
Finally we chmod those 2 files
Code:
adb shell
su
cd /system/framework
chmod 664 framework-res.apk
cd /system
chmod 664 build.prop
exit
exit
Thanks to this post
http://forum.xda-developers.com/showthread.php?t=1185231
If you like this post, buy me a beer!!
Does it workss ???????? Reply anyone
Do you lose contacts on phone or sim?
Kvidli said:
Do you lose contacts on phone or sim?
Click to expand...
Click to collapse
I Brickked my fone.. STUCK ON ANDROID LOGO !!
stupid post! not working..
chrisdf said:
Hello All.
Here are the framework-res.apk and build.prop files for the Optimus One, Stock 2.3.3 firmware. All you need to do is replace those files and you will get the CRT ScreenOff effect
I used the post by Skynet28, modified a little to only use adb commands.
This was the first thing done after rooting the phone.
-NEEDED:
Rooted phone
.7Z file View attachment 949259
5 Minutes of your time
NOTE: YOU WILL MOST PROBABLY LOOSE YOUR PHONEBOOK, I DID WHILE DOING ALL THIS. PLEASE BACK THAT UP.
The procedure to install is as follows:
You must set the /system on the phone with RW permision
From a Command Prompt:
First we locate where /system is mounted
Code:
adb shell
su
cat /proc/mounts
Locate /system in the mount and write down the mountpoint (mtdblock1 or similar)
the type
Code:
mount -o rw,remount /dev/block/[I][COLOR="Purple"]MOUNTPOINT[/COLOR][/I] /system
exit
exit
Then we push both files to the phone with the folowing adb command
Code:
adb push framework-res.apk /system/framework
adb push build.prop /system
Finally we chmod those 2 files
Code:
adb shell
su
cd /system/framework
chmod 664 framework-res.apk
cd /system
chmod 664 build.prop
exit
exit
Thanks to this post
http://forum.xda-developers.com/showthread.php?t=1185231
If you like this post, buy me a beer!!
Click to expand...
Click to collapse
You cant use this on anything but stock LG 2.3.3!
That means Cyanogenmod, AOSP, etc
kunnaliskinng said:
I Brickked my fone.. STUCK ON ANDROID LOGO !!
stupid post! not working..
Click to expand...
Click to collapse
Flash stock v20g using KDZ then root and do what this post says right away, i assure you it works.
This is only for STOCK 2.3.3
Kvidli said:
Do you lose contacts on phone or sim?
Click to expand...
Click to collapse
On your phone, but if you have it linked to your gmail account, when you sinc you will have them back.
you should still back up anyway, its safer that way
Only stock Rom
I want use on oxygen Rom .
Sent from my LG-P500 using Tapatalk 2
Are there any available screenies?
doesn't work for me..
kotobodj said:
Only stock Rom
I want use on oxygen Rom .
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
If you want it on any GB Rom, follow the tutorial i followed, check at the end of the post there's a link.
kunnaliskinng said:
I Brickked my fone.. STUCK ON ANDROID LOGO !!
stupid post! not working..
Click to expand...
Click to collapse
i think nothing to angry for this. just read carefully before do anything :laugh:
)
cool!)
Hello Everyone. I bricked my device and need the following files to fix that. Please, can someone with a rooted device provide this files?
Thanks much:
/system/framework/services.odex
/system/app/DownloadProvider.apk
/system/app/DownloadProvider.odex
/system/app/DownloadProviderUi.apk
/system/app/DownloadProviderUi.odex
Thanks again
MarcoJoo said:
Hello Everyone. I bricked my device and need the following files to fix that. Please, can someone with a rooted device provide this files?
Thanks much:
/system/framework/services.odex
/system/app/DownloadProvider.apk
/system/app/DownloadProvider.odex
/system/app/DownloadProviderUi.apk
/system/app/DownloadProviderUi.odex
Thanks again
Click to expand...
Click to collapse
hey don't feel bad I need boot img and system img to get my running again....or I just need to pop it in the microwave and call amazon and ask for a new one and start over
My Kindle is alive. If someone need this files too, they can be found in the Update.bin at Amazons website.
@crzyjoker13. Good luck with your device.
Here you go, pulled straight from the latest update...
It's just the files you requested, the file structure should be correct.
crzyjoker13 said:
hey don't feel bad I need boot img and system img to get my running again....or I just need to pop it in the microwave and call amazon and ask for a new one and start over
Click to expand...
Click to collapse
You can get them from Amazon's website. That's your best bet at this time.
really lost
NighthawkXL said:
Here you go, pulled straight from the latest update...
It's just the files you requested, the file structure should be correct.
Click to expand...
Click to collapse
ok this is a start but how do I get them to /system/app
crzyjoker13 said:
ok this is a start but how do I get them to /system/app
Click to expand...
Click to collapse
Your need to get the device to be picked up by ADB and then push the files if your not able to boot into the actual system itself. Your have to ask someone else for the commands... but here's a snippet for services.odex the rest the files should be similar pieces of commands.
Code:
adb shell
su
mount -o rw,remount /system
chmod 777 /system/framework
exit
exit
adb push services.odex /system/framework
adb reboot
step in the right direction
NighthawkXL said:
Your need to get the device to be picked up by ADB and then push the files if your not able to boot into the actual system itself. Your have to ask someone else for the commands... but here's a snippet for services.odex the rest the files should be similar pieces of commands.
Code:
adb shell
su
mount -o rw,remount /system
chmod 777 /system/framework
exit
exit
adb push services.odex /system/framework
adb reboot
Click to expand...
Click to collapse
well hey this is a step in the right direction but all I need now Is to gain read write acess to /system and system/app abd I should bea able to push the old files back...my problem lies in the fact that es explorer tried to update and it messed up so I went to remove and just install the new version at the same time I was following the directions to put play market on the dev so now I can download and I have no file explorer
or if anyone know how I can push and execute an apk to the kindle I would be happy
thanks in advance
crzyjoker13 said:
well hey this is a step in the right direction but all I need now Is to gain read write acess to /system and system/app abd I should bea able to push the old files back...my problem lies in the fact that es explorer tried to update and it messed up so I went to remove and just install the new version at the same time I was following the directions to put play market on the dev so now I can download and I have no file explorer
or if anyone know how I can push and execute an apk to the kindle I would be happy
thanks in advance
Click to expand...
Click to collapse
I was having the same problem as you are and was able to fix it by doing the following.
Download and extract the files NighthawkXL has provided.
From within the folder that you saved the files run command and do the following
adb shell
su
mount -o rw,remount /system
chmod 777 /system/framework
exit
exit
adb push services.odex /system/framework
adb push DownloadProvider.odex /system/framework
adb push DownloadProviderUi.odex /system/framework
exit
adb shell
su
mount -o rw,remount /system
chmod 777 /system/app
exit
exit
adb push DownloadProvider.apk /system/app
adb push DownloadProviderUi.apk /system/app
adb reboot
I think this will solve your problem with the downloads not working. Please keep in mind I have small amount of knowledge when it comes to rooting, but figured that it couldn't do more damage to it since it wasn't working.
LinearEquation said:
You can get them from Amazon's website. That's your best bet at this time.
Click to expand...
Click to collapse
can you provide a link to the system images please
thanks cant seem to find them
davethebrave14 said:
can you provide a link to the system images please
thanks cant seem to find them
Click to expand...
Click to collapse
https://s3.amazonaws.com/kindle-fire-updates/update-kindle-11.3.1.0_user_310084920.bin
Just downloaded .bin gonna check this out also. I didn't brick mine its usable but I screwed it up trying to take things off to get more memory and easier on battery. Runs ok now but I took off the system keyboard thinking the android keyboard file would be it the asop or whatever. So had to add Google keyboard which is better and the main navigation is gone with the back and menu key. ROFL. Using all in one gestures and omega status bar as a rig lmao.
adb install package.apk works fine after adb start-server with linux.
Theres app in 1 mobile market for moving .apk to /system/app folder.