Hello Guys,
Can anyone help me plz? I am having following issues with my Imate jasjar:-
1. I send my jasjar to a friend away from my city to get my cell's body change. My cell was very well working.
2. nw i have received my cell with a new body and he called me up that my cell have some issues with some hardware so he needs to change them and i asked him to go ahead with it.
3. Nw i m trying to use my cell but my cell is not accepting any of the sim. and i am not able to open the connection management so as to manage the network connections.
4. I am not even able to see my IMEI no in the Device Information and even after i go for *#06#. and The guy he did the cell is not available anywhere.
Can i know what is wrong with it and what can be the solution for the same?
ROM - 1.13.53 WWE
ROM Date - 09/23/05
EXT ROM version - 1.13.137 WWE
The window version is 5.0
Plz help me out.
Related
Hi All,
I hope someone here can help me with this. I have a T-Mobile MDA, i was playing around with O2 site and i found the Radio Stack Upgrade 4.21. I upgraded it and after the upgrade was finished successfully, the Phone doesn't want to get service... asa it opens up it gives me the Antena and an ! next to it and says No Service.
What could be the problem and how can i get back the old stack.
Hope that someone can HELP me..
Thanks a lot in advance
Hi, if I'm understanding your problem correctly then what I suggest is:
Go to Start-Settings-System and select the Auto-Configuration application. This should allow you to choose your operator from a list and it will then auto configure your GSM/GPRS settings and reset the device, after which it should work.
Good luck
Steve
Hi
I cant' find any Auto-Configuration app what is it called?
thx
dat version dont have auto config :?:
Hi!
Installed T-Mobile WM2003 from the ROM kitchen.......... Network very weak and the phone has become very slow. Now I want to move back to O2 original ROM (WM2002).
When I try to install the ROM I get an error message :
"ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype"
and the 02 ROM installer cannot communicate with my XDA.
Can someone please help me get back the original 02 ROM, with sim unlocked???
Really need some help here. :?:
I loved my phone as it was and I was stupid to experiment with it !!
regards ,
Diki
If you used the kitchen to cook your ROM then it shouldn't have any impact on the RSU part. Plz give more details on your RSU version, your network MHz and what types of problems you have ?
BTW, did you upgrade to 4.01.00 or 4.01.16 ?
To get back to PPC2002, you can use the SD method
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
I upgraded it to 4.01.16
Radio version installed is 4.21.00
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Going back to 2002
I received from a friend a pre-release version of t-mobile ppc2003 a few months ago. He put it on my phone via a sd flash. T-mobile has just released (for free) on their website a final release of ppc 2003 and the one I am using is somewhat unstable at times. Does anyone happen to have t-mobile ppc2002 so that I can upgrade. Thanks.
Diki said:
PROBLEMS:
a. The XDA has become very slow (I have a lot of free space on the XDA)
b. Network signals are weak.
Click to expand...
Click to collapse
a. there is a bug in WM2003 and there is a tiny program that should be placed in the \windows\startup directory to solve it. The program is called Clear_Notify.exe ... simple search and you will find it.
If not, then it's a Radio problem that impacts the ROM part. Few hard resets may solve it.
b. if you mean the indicator on the window tray, forget about it ... the point is the ability of making/receiving calls. If you face real problems, I think it's the 4.21 RSU, but be extreamly careful ... upgrading the RSU is very risky especially with this RSU 4.21 on your device!!!!!!.
Good luck
tellan said:
if you upgraded to the 4.01.16 I had this problem too.
you can't use the rom.exe method via the cradle if you've put this tmobile rom on your XDA, you have to use the SD flash method.
Click to expand...
Click to collapse
1. Can you please send me the steps for installing the O2 OS on a SD card?
2. and once it is installed and working, can I just go ahead and delete all the folder (windows program files etc) from the phone memory?
What are the risks involved in writing ROM to SD Card?
I have no idea of this. Can you please help me?
Hi Diki,
Did you get a soution to your problem yet? I elaborate on the same problem.
Thanks for your answer
Norbert
I have the same problem and I still don't know what to do. Please elaborate if you can.
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX！
:roll: I have this problem too. If someone find the selution,PLS send me a Email: [email protected].
THX！
hello, i've got problem with network or gsm modul or also with soft,
i have updateg radio from 1.12.10 to 1.13.10 because i thought that earlier ver had a bug and my phone lost net due this. With new radio rom it has lost net 3 times during one day yet. Is there someone who knows how to resolve this problem it's become stressfull for me... grrrr
<edit>
i found somethig more, after it has lost net it looks like fine and you can't see any diferences (there is still some bars indicates network range, led is blinking) but you can't perform any connections... phone also is not able to answer call
i'am traying to find when it hapen or after what but help me please
<edited>
BR
Rafal
Please tell us your make of wizard and the rom, maybe a whole rom upgrade will solve your problems.
hi!,
my wizard it's a mda from era (polish t mobile)
ver 1.6.2.8 PLK
date 11/1/05
radio 1.13.10
protocol 4.0.13.24
extend 1.6.2.116
and one thing more, after ended gprs connection i can see restart of gsm, bars are blinking and it log on to net again without requesting pin code, but the problem is i can't make call and answer after soft reset everything backs good
Can suggest using a more up to date rom, not sure if there is a newer PLK rom, but what about a WWE rom?
ok i'll try this but let me know if i can find it on XDA ftp? and which one is it
i have got this phone 2 weeks ago and i still try to lern sth new about it
merci beacoup for Your help
Try the polish t-mobile web site first to see if they have any updated plk roms.
If not most mda users here are using qtek rom ftp://xda:[email protected]_2170702_21707102_20710_QTEK_WWE_Ship.exe
Download above rom, user name xda password xda
Backup all important information as everything will be lost.
Unlock device - super cid is best get unlocker from here and follow instructions http://forum.xda-developers.com/viewtopic.php?t=33796
After unlocking flash device with above rom via activesync
Hope that helps
The behaviour of disconnecting from the network and reconnecting without asking for PIN sounds familiar to me.
I think it is caused by bad connections to the SIM.
I have a dual sim and afterhaving modified it too much i my sims did not make good contact. It occurred more than once that my phone switched sims without me having 'said'to do so (switchin sims is done by powering off/on radio wich looks a bit the same to the dual sim adapter as fawlty contacts).
Advice; clean the contacts of both sim and phone before you upgrade (although I can recommend an upgrade to aku 2 roms)
i had upgrated to this one - prodigy......WWE_ship from xda ftp and now i'm waiting for problems maybe there will be no problems ...
big thanks to Those of You that answer my questions ... thx
I have a problem with my QTEK S200, i lose the signal completely, can you tell me if changing my windows mobile version i can fix this problem?
Thanks
Somebody help me please
You need to describe your problem in more detail.
Please post the following information:
What ROM and radio ROM version do you have? (IPL, SPL, OS, GSM)
This information is available on the startup screen when you turn on your device.
What cell company you are with, when do you loose the signal and do other phones with same company SIM work at that place?
Changing ROM will probably not solve your problem. If this is a malfunction in the phone it is likely you need to go to the lab and have it repaired.
im having trouble with my jasjam . out of the blue the Phone function doesnt work anymore ....... i cant find any signal with my vodafone server ...
but i can put my sim into my other jasjam and it works .....
please help someone
Go to Start>Settings>System>Device Information. What radio rom do you have?
If it says "No GSM" then you have a problem....
Cheers...
radio version 1.20.31.10
i just updated the OS to windows 6.1 Diamond (full) today and didnt change a thing
any help would be great
thanks bud
You need to download a radio only rom. I use 1.54.30.10 on Telstra n Oz. Depending where you are situated and what telco you use depends on what might be the best radio for you. People seem to like the 1.56.70.11 radio but it is still being tested and I don't really like it where I am - reception loss and battery drain... Tell us where you are, we know you're on Vodafone as per your 1st post. You should be able to find the radio roms pretty quick with a search using "radio rom hermes" as the search words.
Cheers...