im stuck on the red green blue and white screen on my tmobile mda..anyone knows how to help me with that? everytime i turn my mda off and turn it back on it still shows the color screen and wont do nothing else..someone help please..
damdismoo said:
im stuck on the red green blue and white screen on my tmobile mda..anyone knows how to help me with that? everytime i turn my mda off and turn it back on it still shows the color screen and wont do nothing else..someone help please..
Click to expand...
Click to collapse
I need more info.
First, don't panic...the screen is the bootloader screen and it's your friend.
When you plug in the usb to the device/pc, do you see "usb" in the lower corner of your device?? If yes, then just snag an official rom from your provider and re-flash your device.
If no, post back with more info.
There are a million threads here of people freaking out, use the search button, read the stickies...I'm pretty sure someone has answered this sometime before. It really is common.
***E D I T***
And for the record, you posted this same question in 2 separate threads, in the future, please don't do that.
i currently have a htc prophet with a white screen all the time even during bootup wm still starts any ideas ???
I have the same problem, white screen all the time. Mine is Imate JamIn.
i have the same problem too.... anyone knows the solution?????
me too. any one can fix it. thanks
did anyone of you tried to flash a new ROM from this forums?
i tried flash 4 rom on xda-developers, but it can sovle the problem. my phone is in white screen even in boot loader. i replce another good screen but it still white. i think it's a hardware problem. any on can fix it. thanks.
htc prophet white screen
i have the same problem i sent the phone of to htc they said it was water damage alough the phone was in a white screen i could still make a phonecall to the htc
use first load a new rom original.
problem no solved,is the hardware,open your PDA and supervise the connectors.
During normal boot my HD2 shows the white HTC boot screen and shows a patch (below the HTC lettering) where the white screen colour is not consistent. This looks to me to be a fault because it has not always been there.
Has anyone else seen this fault? Any advice on how to get back to a T-Mobile UK ROM where they will accept a return for repair?
tony.wheeler said:
During normal boot my HD2 shows the white HTC boot screen and shows a patch (below the HTC lettering) where the white screen colour is not consistent. This looks to me to be a fault because it has not always been there.
Has anyone else seen this fault? Any advice on how to get back to a T-Mobile UK ROM where they will accept a return for repair?
Click to expand...
Click to collapse
Has anyone seen this problem?
Sorry if this has already been posted about or if this is this is wrong place to ask but have used search and couldn't find anything.
I tried to boot the Desire build on my HD2 but after a few seconds teh white writing looked as if it just melted and froze which was really weird and concerned my allot.
I pulled out my battery and rebooted into windows but now I have noticed that when my white HD2 splash comes up I have a very distinct brighter part of back light I think like a smudge of light behind screen.
I did disable auto backlight when booting btw.
Can anybody explain what went wrong or if I have done any damage and will it correct itself.
Again sorry if this has already been discussed, if so can you link me to correct place.
Regards and thanks.
the "melting" is normal.. wouldn't worry about that...
nutmegy said:
the "melting" is normal.. wouldn't worry about that...
Click to expand...
Click to collapse
When I say melting I dont mean when the writing moves down screen fast etc, I mean it physically looks like the writing freezes and then white text melts away into black background.
I also have a HD1 and have used android on there allot and didn't have teh same melting look which concerned me allot as I though it was damaging the light or digitizer etc.
[edit] Just watched a youtube video of desire booting and it did the same thing so am gunna give it another go, can anybody explain the light issue though regarding teh smudge of brighter light after booting rom as its still there and concerns me a bit.
ATHiEST said:
When I say melting I dont mean when the writing moves down screen fast etc, I mean it physically looks like the writing freezes and then white text melts away into black background.
I also have a HD1 and have used android on there allot and didn't have teh same melting look which concerned me allot as I though it was damaging the light or digitizer etc.
Click to expand...
Click to collapse
Check the last visible lines of text just before this happens. Do you see something like "init panel" there? Then it should be perfectly normal.
ATHiEST said:
When I say melting I dont mean when the writing moves down screen fast etc, I mean it physically looks like the writing freezes and then white text melts away into black background.
I also have a HD1 and have used android on there allot and didn't have teh same melting look which concerned me allot as I though it was damaging the light or digitizer etc.
Click to expand...
Click to collapse
I get that too...during boot...then it comes back and continues to load Is it not continuing to boot for you at that point? Have you disabled auto-backlight dim in Winmo before launching Haret? Are you seeing the boot text fade then just yanking the batt out?
ATHiEST said:
When I say melting I dont mean when the writing moves down screen fast etc, I mean it physically looks like the writing freezes and then white text melts away into black background.
I also have a HD1 and have used android on there allot and didn't have teh same melting look which concerned me allot as I though it was damaging the light or digitizer etc.
Click to expand...
Click to collapse
Sounds like your screen crashed.. Happened a lot in the early Touch Pro Android days.
meptik said:
Check the last visible lines of text just before this happens. Do you see something like "init panel" there? Then it should be perfectly normal.
Click to expand...
Click to collapse
+1, this is just the system "shutting down" and booting back into linux, you are fine.
meptik said:
Check the last visible lines of text just before this happens. Do you see something like "init panel" there? Then it should be perfectly normal.
Click to expand...
Click to collapse
Yeah it does.
Ive just tried again, the text fades etc then just stays on blank screen and doesnt go anywhere?
Im prettt sure I turned auto back light off (unless it goes back on after windows reset), how long is it supposed to stay on the blank screen?
[edit] Just tried a second time....
Clean formatted card
Extracted desire build 5
turned auto back light off
run CLRCAD
run haret
get the linux boot text
get init panel
txt melts away
just hangs, waited for 10 mins, nothing.
Do these builds need any particular windows rom version/radio version/spl/hspl etc?
ATHiEST said:
Yeah it does.
Ive just tried again, the text fades etc then just stays on blank screen and doesnt go anywhere?
Im prettt sure I turned auto back light off (unless it goes back on after windows reset), how long is it supposed to stay on the blank screen?
[edit] Just tried a second time....
Clean formatted card
Extracted desire build 5
turned auto back light off
run CLRCAD
run haret
get the linux boot text
get init panel
txt melts away
just hangs, waited for 10 mins, nothing.
Do these builds need any particular windows rom version/radio version/spl/hspl etc?
Click to expand...
Click to collapse
There's a definite requirement for the radio version: 2.08.50.05 or higher, as long as there's a 50 in the version number. People have been getting good results with 2.10.50.28_2 and 2.12.50.02_2.
ROM version might also influence things, check the Android thread. Some people are recommending EnergyRom, I'm using Artemis right now.
I got Desire v5 running very nicely here. My setup:
ROM: Artemis v25 WWE
HSPL: 2.08
Radio: 2.12.50.02_2
meptik said:
There's a definite requirement for the radio version: 2.08.50.05 or higher, as long as there's a 50 in the version number. People have been getting good results with 2.10.50.28_2 and 2.12.50.02_2.
ROM version might also influence things, check the Android thread. Some people are recommending EnergyRom, I'm using Artemis right now.
.
.
.
Click to expand...
Click to collapse
I second that. I'm running exactly what's in my sig and I have zero problems running the v5 Desire build.
Ahh that will be my problem then, Only just got teh HD2 a couple of days ago second hand (mint condition though) and forgot to update radio, currently has 2.06.
Will update now and hopefully get something booted, will post back thanks for help.
booting problem
the fading of the white words and symbols going down is normal happens to all the hd2 that are booting up i wouldnt worry about it i did it on both my hd2s and when i click on heret it starts booting then letters fade away and the penguin for linux pops out its normal.
i have somthing else tho i dont know if you guy got this but when i open desire build v5 everything works but wen my phone goes to sleep the buttons stay on does everyone have this same pronlem or just me like i do the complete boot everything goes well smoothly i can make calls and everything but wen it goes to sleep for some reason the light on the buttons stay on while in sleep mode help me out.
i tried booting mine,
black screen
the button lights are all on
green light flashed in top section of phone (normal message indicator light)
Radio version is 2.12.51..
I've got a problem. two weeks ago I sent my HD2 to be repaired.. it had those white bright spots on the screen. Now I've got it back (they replaced the screen) but Android doesn't work anymore :S
I installed HSPL again, flashed chuckydroidrom and as far as I know all the settings are the same. Still when I try to boot android haret runs normally... then I get a black screen with some small text in the upper left part of the screen telling me that windows is being shutted off and some android parts are starting. After that the text gets a copy of the text behind it in purple and green. and after that the text fades away, leaving a full lit up black screen behind.. Then is doesn't do anything anymore..
I don't understand why it behaves differently after being repared and I don't understand why the android booting stops. as I said. I use Chuckydroidrom, HSPL 1.42.HSPL and I tried several different versions of android. Mdeejay desire Z-rom, and ofcourse my favorite mattc 1.8. plz help
SOLVED. thanks, thread can be closed or removed
try to install another radio
makavelitha said:
try to install another radio
Click to expand...
Click to collapse
thanks mate, I knew I forgot about something it worked
no problem