Database Users

Broke the front glass of my G2 :( -- FIXED! :)

Everything works fine (except for the camera focus, which I can live with since everything is in focus always as it is because it shoots at like f/8). What's weird is that it has survived so many other falls onto concrete, and this just happens now.
I really need to replace the glass as soon as possible. It looks pretty unprofessional cracked like this.. I am out of warranty (bought the phone in September 2010 from T-Mobile), and T-Mobile no longer has any G2s .
I've looked through a few people who have mentioned replacing their front glass, and would like to do so myself. Anyone have advice regarding how I could do this?

http://www.youtube.com/watch?v=u-dR8CHEGjY

less than $20 for new digitizer, takes 30min -- leave yourself an hour if your new to this

Sweet thanks! Looking forward to getting this done. Will keep this thread updated.

Ordered it from the website. Hopefully will get it soon.

captainreynolds said:
Ordered it from the website. Hopefully will get it soon.
Click to expand...
Click to collapse
I highly advise AGAINST super glue for securing the digitizer.

silverton said:
I highly advise AGAINST super glue for securing the digitizer.
Click to expand...
Click to collapse
Okay - what would you recommend instead?

the glue that is on your phone now will sufice. when heat it up with hair dryer (be carefull if you use a heat gun) most of it will stay along the frame of your phone. just keep it warm and quickly put new digitizer back. have done it twice now with g2s and countless times with g1s and no dust has ever seeped in.
but with g1s i often replaced the casing as well. here i would use 3m double sided tape that worked very well. if you are also replacing the case or for some reason dont feel the glue is enough use this
Sent from my HTC Vision using xda premium

I recommend 2mm 3M adhesive tape. I have used it for the 3 g2s I own and it holds darn well. Its less then 5 bucks on amazon and you will have quite a bit of it. Dont use glue. I always take off that old black tape.
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U

demkantor said:
the glue that is on your phone now will sufice. when heat it up with hair dryer (be carefull if you use a heat gun) most of it will stay along the frame of your phone. just keep it warm and quickly put new digitizer back. have done it twice now with g2s and countless times with g1s and no dust has ever seeped in.
but with g1s i often replaced the casing as well. here i would use 3m double sided tape that worked very well. if you are also replacing the case or for some reason dont feel the glue is enough use this
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Okay - thanks for this!
Darkseid83 said:
I recommend 2mm 3M adhesive tape. I have used it for the 3 g2s I own and it holds darn well. Its less then 5 bucks on amazon and you will have quite a bit of it. Dont use glue. I always take off that old black tape.
Click to expand...
Click to collapse
The tape doesn't make the digitizer bulge away from the surface at all? I feel like it would. I'll give that link a buy though, just in case.

the tape he and i is refuring to is thinner than paper, i have not needed it for a g2 before but only have done 2 digitizers on these so i cant say its never necessary unless you are replacing the case as well, but its cheap to have around and may be needed
Sent from my HTC Vision using xda premium

The tape doesn't make the digitizer bulge away from the surface at all? I feel like it would. I'll give that link a buy though, just in case
Click to expand...
Click to collapse
No if you stack it right I had to stack three pieces of that tape to flush it. It does not move around if you tape in the right spots. Its very thin and almost invisible.

That is weird... I did the SAME thing last week lol! I busted it on the concrete too and everything. It scratched up the bezel pretty bad too. I had insurance so I ended up getting the MT4GS (aka HTC Doubleshot). I love how speedy it is but I REALLY miss the development here and the GREAT community here in the Desire Z/G2 sub forum As far as repairing/replacing the screen (the digitizer specifically), everyone here gave great advice. I used to repair phones for a number of years and we always used a sealant very similar to double sided tape that y'all were mentioning. It basically was foaming glue that acted similar to silicon or something. I agree that about not using super glue. Bad idea. Also be careful with the ribbon wires and watch a few videos prior to disassembly. There were a few tear down threads here I'd keep handy while repairing. Good luck to ya!

Make sure you are VERY careful when removing the lcd its very fragile. I reaced my digitizer easy and was careful and lcd got mrssed up ie no pic. Ordered a new lcd and it had not brightness control always dim waiting for new replacement now. Side note once new screen comes in I will be selling this phone if anyone is interested i have 3 of them only need 2
Sent from my SGH-T959V using XDA

Son of gun. The last three screws I need to remove do NOT fit with the philips head screwdriver that was recommended. Now I get to scramble around with my phone in pieces trying to find a smaller philips head screwdriver. Awesome.
They are philips head, not torque screws. I checked and triple checked.

Anyone have any idea what to do here? I can't find smaller screwdrivers anywhere. Home depot has got nada.

Go out and buy a precision screwdriver set or maybe a eye glasses repair kit. Only the first 3 screws are torx T5. Also there is 7 of them tiny ones not 3. There is 3 on either side and one more under keyboard backstop
Sent from my SGH-T959V using XDA

anoymonos said:
Go out and buy a precision screwdriver set or maybe a eye glasses repair kit. Only the first 3 screws are torx T5. Also there is 7 of them tiny ones not 3. There is 3 on either side and one more under keyboard backstop
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
No it's the three screws across the back at this time (http://www.youtube.com/watch?feature=player_detailpage&v=u-dR8CHEGjY#t=251s).
They are smaller than all the others and I still cannot get them out. I cannot find an eye glasses repair kit or precision screwdriver set small enough.

http://www.repairsuniverse.com sent me the screwdrivers for the Inspire 4G. Pretty sure the digitizer is for the G2 but I'll have to check the screen sizes to make sure.
Update. Fry's elecronics had a repair kit for smartphones that fit the screws. Still working on it.

captainreynolds said:
No it's the three screws across the back at this time (http://www.youtube.com/watch?feature=player_detailpage&v=u-dR8CHEGjY#t=251s).
They are smaller than all the others and I still cannot get them out. I cannot find an eye glasses repair kit or precision screwdriver set small enough.
Click to expand...
Click to collapse
if you keep watching the video you will see that when he removes the sticky keyboard backstop there are three more identical size screws mirrored from the ones you are talking about right on edge of phone, and then when you remove that piece after you remove the screws there wiil be one more (this makes number 7 ) screw of the same size tiny. Also i dont think it is metioned in the video but when you go to remove the keyboard backstop (the shiny piece under the sticky strip ) use your safe pry tool to unlock the tabs from the edge and then you must slide the piece towards the center of the phone it does not just pry off there are tiny tabs holding one side down opposite of the screws ( edge of phone ) And as far as the screwdriver for eye glasses repair, is it you cant find one or it just does not work? You should be able to find one at any walgreens or equivalent drug store or pharmacy. You could also try a hobby shop they might have something that will work. I personally use quite a big screwdriver to disassemble you just need to make sure it has a sharp point at the tip of the star ( mine is a phillips number 00 ) Believe me once you get it apart once you will be that was so easy.

London, UK - Anyone that can replace the GLASS ONLY on an S3? (NOT the whole LCD)

Please, no posts saying it cannot be done, it can.
If you do this as a service and are in or around London, please reply or PM me.
My S3 is "Amber Brown" (Unique to Phones4U I think) but I do not care if the replacement part is not this colour.
Cheers!

Heat gun and steady hand is all that's needed. Good luck.
Sent from my GT-I9300 using xda premium

evilc said:
Please, no posts saying it cannot be done, it can.
If you do this as a service and are in or around London, please reply or PM me.
My S3 is "Amber Brown" (Unique to Phones4U I think) but I do not care if the replacement part is not this colour.
Cheers!
Click to expand...
Click to collapse
You can normally get it done by a Samsung Service Centre.
http://www.samsung.com/uk/servicelocator/ find it here. They should quote you a price. Cheers.
Sent from my GT-I9300 using xda app-developers app

Yeah, I saw that from the video, and I am not too scared to mess with phones generally, but I am a little clumsy and as it is a screen, any slip of the knife would be catastrophic.(Plus I had a penknife close on me not so long ago, badly cutting my finger and knives still freak me out a bit)
Would happily pay someone £50 to do this for me, but no way I am paying £200 to replace a perfectly good LCD.

Jekle_Ace said:
You can normally get it done by a Samsung Service Centre.
http://www.samsung.com/uk/servicelocator/ find it here. They should quote you a price. Cheers.
Click to expand...
Click to collapse
I did ask in the samsung centre in Tottenham Court Road and they seemed to think that the LCD needed replacing too, maybe I should try some more Samsung service centres because keeping the warranty would be nice as it is only a week old

evilc said:
I did ask in the samsung centre in Tottenham Court Road and they seemed to think that the LCD needed replacing too, maybe I should try some more Samsung service centres because keeping the warranty would be nice as it is only a week old
Click to expand...
Click to collapse
No service center will replace the glass, they all change the whole screen.
I advice keeping the warranty and paying the 200, you won't regret it.
People that changed the glass (including my friend) all had it perfect, then it started lifting an air bubbles covered some parts of the screen, i know others that cracked the actual LCD when trying to change the glass.

The glass can be replaced easily. I've done it on my s3 and I can tell you that geting the broken glass off is a piece of cake. Just use a heat gun and a few guitar picks,work arround the edges and make sure that you maintain the screen hot, heating it up with the heat gun so that the adhesive is warm and softened the whole time.
The glass itself is made out of two layers, first layer is the transparent glass and under the glass there is a plastic layer that gives the glass its color.you want to stick the guitar pick under the second layer, stick a half of the pick under the glass and start applying preasure on the part of the pick that sticks out of the glass. Push the pick down, towards the table and the glass will start to get off. Use multiple guitar picks on multiple parts of the glass to make sure you dont brake the screen.
The hardest part of reinstalling the glass is getting it on without any dust between the lcd and the glass. Use the 3M adhesive sticke (ebay) precisely cut for the s3 and clean the adhesive on the housing and the LCD with which the original glass was glued. That's it, good luck!

Sorry mate, wish I could help. Good luck getting it replaced!
Sent from my GT-I9300 using xda app-developers app

http://www.ebay.co.uk/itm/GENUINE-O...cement_Parts_Tools&hash=item3f1e335896&_uhb=1
Next best option ...

I have found someone in the UK who offers this as a service, but he also offers an international service
ebay link:
http://www.ebay.co.uk/itm/Service-t...K_Replacement_Parts_Tools&hash=item2ec2624d7d
His YouTube vid:
http://www.youtube.com/watch?v=FHib-yptAQk&feature=youtu.be
I have no experience of using ebay for repair services which require sending the device off though, so I am cautious here. Am investigating if ebay offer any cover for scams etc.
I will post back here with my experiences.

hey guys anyone found a way to remove lcd from frame on Samsung s3

Think you heart the front lightly and get a tool to lift it out, then use a credit card to scrape underneath
Sent from my GT-I9300 using Tapatalk 2

iRepairUK.net said:
hey guys anyone found a way to remove lcd from frame on Samsung s3
Click to expand...
Click to collapse
As the LCD isn't available as a replacement part why bother?
Sent from my GT-I9300 using xda app-developers app

There's no lcd anyway
Sent from my GT-I9300 using Tapatalk 2

[Q] Nexus 7 Screen cracked! Questions.

Okay so it's been less than a f***ing week and I've managed to crack my Nexus 7 32GB 3G. Hell yeah. Fell on a bathroom ceramic tile from 4 foot high and the corner bit chipped off. The entire touch screen works though, it's just the corner bit cracked.
SO ANYWAYS! I have a few questions for those smart guys out there that know about displays.
First of all, I've found out from the internet, that because the LCD and the Digitiser are glued together, I'd need to buy them together. Otherwise known as a Nexus 7 Display Assembly.
Few questions:
1) If I buy a display assembly from ebay for example, will it be of less quality than ASUS's original screen, or will it probably just be a part from ASUS anyways?
2) If I do buy this display assembly, will it still have the same number of Pixels as the original screen?
3) Will it have the same brightness, same touch responsiveness, same all that **** as the original screen?
If not, I may consider just repairing directly from ASUS, so...
4) How much does it cost in pounds(£) to repair the N7 Screen all in, taking into account my shipping fees from the UK?
Seriously need someone who has any experience of this whatsoever
I'm considering if I should repair this with the 3rd party screen and sell it privately if it's not the same quality, then buy a brand new one for myself. What's your guys thoughts on this? I really need some of your expert advice

I JUST replaced the screen on my nexus. I bought the display assembly from powerbookmedic.com, and the tools I needed from iFixit.com. All in all, it cost me around $200 in the States. The repair process was pretty easy, and the screen looks and functions exactly the same as the original screen. My only suggestion would be to make sure you have some good adhesive. I have a little screen lift now because the adhesive lost its traction when I took the cracked screen off the upper casing. Good luck!
Sent from my Nexus 7 using xda app-developers app

Adhesive?
jwilkins3691 said:
I JUST replaced the screen on my nexus. I bought the display assembly from powerbookmedic.com, and the tools I needed from iFixit.com. All in all, it cost me around $200 in the States. The repair process was pretty easy, and the screen looks and functions exactly the same as the original screen. My only suggestion would be to make sure you have some good adhesive. I have a little screen lift now because the adhesive lost its traction when I took the cracked screen off the upper casing. Good luck!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Huh? Adhesive? We have to add adhesive? I thought adhesive was only to the digitiser + the lcd screen? I thought that it already comes assembled when you buy the part, because apparently you have to buy it together? If it isn't used for digitiser/lcd screen, then what did you use adhesive for?

The digitizer is indeed fused to the glass, but the silver ring you see around your screen is also fixed to the glass with adhesive, and that part doesn't come with the LCD/digitizer assembly.
The screen affixed itself to this upper casing on mine okay, but I do have about a millimeter or so of screen lift now which I didn't have before.
Sent from my Nexus 7 using xda app-developers app

jwilkins3691 said:
The digitizer is indeed fused to the glass, but the silver ring you see around your screen is also fixed to the glass with adhesive, and that part doesn't come with the LCD/digitizer assembly.
The screen affixed itself to this upper casing on mine okay, but I do have about a millimeter or so of screen lift now which I didn't have before.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
LOL wanna do an ASUS Warranty job! LMAO!

bump
bump...

The best way to attach the new display is to use very thin two sided tape. you cut it in 1/8 inch strips. Apple it all the way around the bezel. then with a sharp knife run it along the inside bezel. Pay close attention to the thin bezel area on the left side ({where screen lift occurs) To be sure you do have it perfect in that area.. Ithe screen face down on cloth . Push the bezel onto the sticky tape (with film removed of course.. Turn device over and put back together.. LEAVING OUT THE TWO CENTER SCREWS or leave then very loose on the left side.(if you have a newer model of nexus these screws will be gone anyway). I have done many phone /tablet screens . If you can get it apart and back together you can replace the screen assembly..
No real need to send it to someone else nexus is easy to dissemble reassemble
Good Luck... Buy a full working 8 gb from ebay for 150.00 might be your best best....

Any clue How to detach the broken glass\digitazer\lcd from this aluminiun bezel?

I recently broke my screen as well. I saw on ebay only 2 options. First option is a screen only for about $50 which doesn't look like it will do anything for me. You the second option is a digitizer for around $300. $300 clearly exceeds the cost of a brand new device so that wouldn't make any sense at all. Even $200 doesn't make sense as I can buy a 8gb device for that and swap screens. I have the 16gb model. Does anyone have any cheaper sources for screen/digitizer that make economic sense?
Thanks,
Dan
Sent from my SPH-L710 using Tapatalk 2

found the replacement screen at Taobao together with instruction (written in Simplified/Handicap Chinese), it costs roughly HK$950 (i.e. US$120)
http://item.taobao.com/item.htm?id=...416_2297358_8935934:1355472362_4k4_1264543304

what the ....
unixwise said:
found the replacement screen at Taobao together with instruction (written in Simplified/Handicap Chinese), it costs roughly HK$950 (i.e. US$120)
http://item.taobao.com/item.htm?id=...416_2297358_8935934:1355472362_4k4_1264543304
Click to expand...
Click to collapse
Dude! That's all in chinese LOL! We can't even read any of that! Can you maybe provide video instructions of the buttons to click to buy the item? LOL

cheap nexus 7 16 gb
Umair166 said:
Dude! That's all in chinese LOL! We can't even read any of that! Can you maybe provide video instructions of the buttons to click to buy the item? LOL
Click to expand...
Click to collapse
i seen a add on sears outlet website nexus 7 16 gb for 179.00 I think they are returned or refurb units..
http://www.searsoutlet.com/Google-N...rh1_md&pn=1&ps=24&pid=105502&mode=buyUsedOnly

Ehh...?
erica_renee said:
i seen a add on sears outlet website nexus 7 16 gb for 179.00 I think they are returned or refurb units..
http://www.searsoutlet.com/Google-N...rh1_md&pn=1&ps=24&pid=105502&mode=buyUsedOnly
Click to expand...
Click to collapse
It seems pretty pointless to me why you posted that in response to my comment about the chinese website because
a) It was a chinese website... I just needed some help because of the language lol
b) It seems we're only interested in the screen which is what was being suggested... not the a full device like you said lol
c) Your price is $179... his price for the screen was ~$120... so even if I was to harnass only the screen in your one... I'm still at a loss.. lol
Thanks for the try though!

Actually $179 for an entire new (refurbished) nexus 7 with 16gb more storage than mine is a very tempting option. I may choose to do that vs spending almost the same to import a screen from China, have to go through the hassle of installing it myself and hopefully do it properly and have it look clean and factory. If I did that then I could still hang on to my broken one in hopes that in 6 months or so the screen prices might drop to a more reasonable price.
Sent from my SPH-L710 using Tapatalk 2

bmwguy said:
Actually $179 for an entire new (refurbished) nexus 7 with 16gb more storage than mine is a very tempting option. I may choose to do that vs spending almost the same to import a screen from China, have to go through the hassle of installing it myself and hopefully do it properly and have it look clean and factory. If I did that then I could still hang on to my broken one in hopes that in 6 months or so the screen prices might drop to a more reasonable price.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
oh. Glad it works for you! I've got a 32GB 3G model, so it's not really much help at all for me :/

hi , does nayone one know the current price asus charge for lcd replacement ?
im fully aware of cost of buying the lcds and doing myself or a second hand unit etc, but just trying to confirm the asus repair price please in the UK

looks like there are much cheaper screens/digitizers available on ebay now. anyone try replacement yet?

[GUIDE][WIP][DIY] **UPDATE! VIDEO ADDED** Nexus 4 Digitizer and LCD Replacement Guide

So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be

http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
Sent from my Nexus 4 using Tapatalk 2

Judging from ifixit, it's going to be pretty hard to replace the screen. Would you mind keeping us updated on your progress here? I'm curious to see how hard it's going to be.

The glass is fused to both the display and the display frame. So don't crack the glass unless you're good with a heat gun, or you're fond of replacing the glass, display, and frame together ($$$).
Click to expand...
Click to collapse
- iFixit.
Yeah, I think it might be a bit of a challenge. Please tell us how it goes though.

i think he ordered the whole glass/screen/digitizer fused together thing, which shouldnt be as hard to replace ( i hope). Anyways, please do keep us updated.

Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium

speedygonzo said:
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
At least you get a new battery too, but that' s expensive :crying:

Bump...
Sent from my Nexus 4 using xda premium

I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..

vikramkhalsa said:
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
Click to expand...
Click to collapse
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?

When you sent the phone to LG was it overseas or in the US? Also whats the website? thanks

neotekz said:
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
Click to expand...
Click to collapse
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself

speedygonzo said:
So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
Click to expand...
Click to collapse
Thanks buddy,
The same happened to me. But unfortunately i'm located in India.. Is it possible to purchase this Display assembly from India..
I'm really worried..

Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.

Battery bending under removal
I'm also sorry to have to reply to an old thread, but I am in urgent need of an answer.
I recently cracked my phone's screen. I ordered a screen+frame repair kit, and got repairing. However, when removing the battery, When prying it from the phone, I realized that the battery was soft, and my tool I was using to pry it off was actually bending it. The battery seems to be curved overall, and slightly pushed on some edges. Also, a weird "sweet" smell came from the phone. Perhaps the smell is the adhesive that sticks the battery to the phone; I do not know.
Will it be safe to use the same battery again? Or should I go ahead and purchase a new one?

Wouldn't a hair dryer work as an alternative heat gun

gravityz3r0 said:
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Click to expand...
Click to collapse
I wouldn't recommend doing so as a LCD+digitizer assembly cists around $60USD I did not think its worth seperating them but you can use a hairdryer to soften the adhesive
Sent from my SM-T310 using XDA Premium 4 mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
jchidori said:
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
Click to expand...
Click to collapse
Use a hairdryer
Sent from my SM-T310 using XDA Premium 4 mobile app

[Q] Cracked screen. Best option.

Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.

WestAussie said:
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
Click to expand...
Click to collapse
use a hairdryer for loosening the adhesive to separate glass and digitizer , being patient is the key but there is a good chance of messing it up

It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P

pietro_spina said:
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
Click to expand...
Click to collapse
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app

WestAussie said:
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Mine had a battery.
This is the part I bought.
OEM LG Nexus 4 E960 LCD Screen and Digitizer Assembly with Front Housing and Battery
from this page (they ship out of Hong Kong)
http://www.etradesupply.com/lg/android-models/lg-nexus-4-e960-parts.html but it appears to be out of stock now. (Maybe I got the last one)
Like I said, it was pricey, but i couldn't risk me screwing it up further since I run my architecture firm with this phone. I was looking for a minimal down time solution because the alternative for me was just buy a new phone in a retail store the next day. Not having access to the lower parts of my screen was seriously limiting. I slogged away for a week using all sorts of work-arounds to activate the dial pad, use parts of the keyboard etc while I waited for the replacement part.
This guy http://www.youtube.com/watch?v=AZDAIgwbXk4 does not show the heating stage but he is so freaking calm, it can't be that bad... Do remove the main board before prying on the battery if you go that route...
-p

I just want to add, for anyone finding this thread, that the part I got from etradesupply.com has some pretty obvious yellowing of the screen. This screen was either removed from someone else's n4 because of this defect or taken from the reject bin at the factory.
In the future if I have any breaks, I will sent it to an LG facility.

Does anyone know of another place to buy the front screen with housing? It is OOS at etradesupply....

Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm

pietro_spina said:
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
Click to expand...
Click to collapse
Thanks... looks like mixed reviews about this company, though.