Hi,
Ill say thanks in advance to help on this question.
I was wondering if anyone knows of an app that would request a code if the sim card was changed in the diamond.
i remember when i had a nokia there was an option to have a sim lock, you entered a passcode and that was it, however if the sim is changed the phone would firstly request the Device/Sim lock, then request the PIN
I cant remember seeing a setting anywhere on my device as it is, and when i searched sim lock on the forum it didnt bring up anything relevant!!
thanks
Hello, i have hd2 locked t-mobile, how can i unlock my hd2 without unlocking code?
you can't. only known method is getting unlock code or those sim adaptors which temp unlock
I mean SIM unlock, there isn't any ways, to unlock it? for example by installing different rom's or smth else?
Nope, to remove the lock of the SIM from one network to all networks requires an unlock code.
in cheapest way, where i could get that code? is it possible to pay by sms?
T-Mobile charge about 15GBP if u are a pay-monthly customer, I think.
The cheapest and fastest way is through htccode.com, imo, 15Euro=13GBP
Has anyone used htccode.com in the last few days? After reading a lot of posts here saying that site was legitimate, I paid for my unlock, and DLed the program. The program said my user info was incorrect, but it was not. After 6 attempts, it warned me I only had 4 left, so I stopped. Tried again today after sending an email with no response and the servers are down. Anyone know what's going on?
has anyone tried these guys http://cgi.ebay.com/Unlock-CODE-HTC...em&pt=LH_DefaultDomain_0&hash=item230700f9ad?
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..
Hello,
I have an omnia 7 with network lock enabele, my provider is charging me with 140 $ for unlocking the device. I flashed diferent custom ROM's but the network lock is still active. Is there any possibility to disable the network lock for free?
Thank you for your time,
Best Regards,
Laurentiu
laur0089 said:
Hello,
I have an omnia 7 with network lock enabele, my provider is charging me with 140 $ for unlocking the device. I flashed diferent custom ROM's but the network lock is still active. Is there any possibility to disable the network lock for free?
Thank you for your time,
Best Regards,
Laurentiu
Click to expand...
Click to collapse
I don't think it's possible for free.
I used these guys. Very reliable and much cheaper than your network.
http://www.unlocksamsungonline.eu/?utm_expid=3836263-1
Free unlocking codes may not work sometimes. So try getting the code from a reliable third party unlocking solutions. I had this problem last week and so i got the code for Samsung Omnia 7 from Unlock-zone.com. Just sprovide then with country, the network to which it is currently locked. After which get the code at low cost and unlock it easily.
Hi anyone tell me how to do i check to see if my S5 900f uk is fully unlocked the code to bring it up just keeps coming up with connection problem or invalid MMI code anyone help with this,the phone is unlocked now but im wanting to know if all the locks are off.
Thank,s in advance.
Anyone help with this?.
Still looking for a solution how to check if the phone is fully unlocked.
Still looking for a solution on this anyone one here any idea.
Try inserting another Sim card
Sent from my SM-G900W8 using XDA Free mobile app
Thank,s for the reply the phone is unlocked i just would like to know if all the locks are off by that i mean provider sub provider etc,or does the unlock code i used turn all the locks off.
tomma66 said:
Thank,s for the reply the phone is unlocked i just would like to know if all the locks are off by that i mean provider sub provider etc,or does the unlock code i used turn all the locks off.
Click to expand...
Click to collapse
How much did you pay for the unlock code? Thanks
Sent from my SM-G900T
Hi i paid £15 for the unlock code from fonefunshop and got the unlock code,provider unlock code and the sub provider unlock code and the unfreeze code as well not that i needed the unfreeze code.
tomma66 said:
Hi i paid £15 for the unlock code from fonefunshop and got the unlock code,provider unlock code and the sub provider unlock code and the unfreeze code as well not that i needed the unfreeze code.
Click to expand...
Click to collapse
How long did it take to receive your unlock codes. Thanks
Sent from my SM-G900T