hi i have tattoo and have problém.when i put the cable into tattoo and to pc,it startcharging but dont show mě menu,where i can choose htc sync,disk drive.. it dont connect the sd card to pc. sd card is working (i have card reader and working) i have custom ROM 1.6 with black sense but dont. work in official ROM,too
sorry for my english i am czech and only 14 years old
So try to explain it in Czech because I don't fully understand you.
Czech:
Napis to sem cesky, bo tomu vubec nerozumim Nejako to poresime.
Pokud ti jde jen o zobrazeni toho menu po pripojeni kabelu, tak to sis mozna killnul nejakou aplikaci, co to resi. Zkus restartovat telefon a bez zabijeni nakych aplikaci pripojit k PC. Pokud ti to pujde, je to jasny. Pokud ti to ani tak nepujde, tak se mrkni nekde do nastaveni, kde myslim jde nastavit, jako co se to ma hlasit, pak se te to mozna nepta.
Thanks, it helped .. I killed about an application, I do not know what application was it.ale .. You know?
Sorry,translator
Czech?:
Děkuji,pomohlo to. Asi jsem "killnul" nějakou aplikaci,ale nevím která to byla. Nevíte vy?
Related
I have bought Qtek 9100 with italian ROM. I downloaded RUU_Pridigy_1060701_101_11310_QTEK_WWE_Ship.exe (I think that's the newest, isn't it), but I need explanation how to "kill" the old one and to install new one.
Thank you in advance!
1. Otkljucas;
2. Flesujes;
3. Izgubio si garanciju :lol:
Treba mi korak po korak objasnjenje. Pojma nemam sta znaci "otkljucas" itd. Ovo sam vec radio sa Qtek-om 2020, ali sam tada lako nasao uputstvo "step by step". Ako znas nesto o ovome posalji mi poruku na [email protected] Hvala.
I downloaded officical czech rom for MDAIII:
http://t-mobile.cz/Web/Residential/T-MobileMDA.aspx#T-mobileMdaCompactIii
,but when I want to install rom, RUU ends on 2% with message : Invalid Model. Other ROMs I can install without problem, but I want install only this, czech. Can anybody help me where is problem? My MDA is from T-mobile Slovakia.Can be this problem? Idont think so...
why you dont use SK ROM?
----------------------------------
ja som to skusal iba zo slovenskou tiez mam MDA z tmobilu SK.
brvno said:
why you dont use SK ROM?
----------------------------------
ja som to skusal iba zo slovenskou tiez mam MDA z tmobilu SK.
Click to expand...
Click to collapse
Dik vyskusal som to... ale rozdiel je ten, ze ceska je lokazlizovana .... co je super aj ked chces MDA predat, lahsie ho predas s cestinou ako s ENG... A aj preto by som tam chcel dat tu cestinu... Ide mi nainstalovat len Vanilla Czech ROM ... ale to sa mi moc nepaci.. je tam strasne vela programov ktore nepotrebujem...
Instalace CS ROM
Napiš mi na [email protected] a pokusime se najít způsob natáhnutí ROM na Artemise jakou budeš chtít.
S pozdravem
Fish
VYŘEŠILI JSTE TO NĚJAK ?
MAM STEJNÝ PROBLÉM 2ks ARTE 110 ( MDA COMPACT III )
V OBOU JE ROM WWE 3.15.113.2 - JDE TAM NAHRÁT VANILLA 2.0
ALE NEJDE TAM ORIGINÁLNÍ ROM OD T-MOBILE, KTEROU ZÁKAZNÍK CHCE PROTOŽE JDE VYTVOŘIT SLOŽKY V TELEFONNÍM SEZNAMU COŽ U VANILLY A TÉ WWE NEJDE. VŽDY SKONČÍM PO 2% NA INVALID MODEL ID.
SAMOZŘEJMĚ JE USPL DĚLANÝ.
PŘITOM TAM LEJU ORIGINAL ROM PRO MDA III
TUTO:
RUU_MDA_Compactlll_TMO_CZ_3.15.113.2_4.1.13.50_03.06.90_Ship.exe
Aladin44 said:
VYŘEŠILI JSTE TO NĚJAK ?
MAM STEJNÝ PROBLÉM 2ks ARTE 110 ( MDA COMPACT III )
V OBOU JE ROM WWE 3.15.113.2 - JDE TAM NAHRÁT VANILLA 2.0
ALE NEJDE TAM ORIGINÁLNÍ ROM OD T-MOBILE, KTEROU ZÁKAZNÍK CHCE PROTOŽE JDE VYTVOŘIT SLOŽKY V TELEFONNÍM SEZNAMU COŽ U VANILLY A TÉ WWE NEJDE. VŽDY SKONČÍM PO 2% NA INVALID MODEL ID.
SAMOZŘEJMĚ JE USPL DĚLANÝ.
PŘITOM TAM LEJU ORIGINAL ROM PRO MDA III
TUTO:
RUU_MDA_Compactlll_TMO_CZ_3.15.113.2_4.1.13.50_03.06.90_Ship.exe
Click to expand...
Click to collapse
Tak to jsme na tom dva , je mi už jedno jakou rom tam dostanu , hlavně když bude česky. Už jednou jsem měl problem u kamoša tam dostat romku ( mám verzi s wifi) , nakonec se mi to nějak podařilo ( cca. rok zpatky , takže si nepamatuju jakou jsem tam dal) , ale teďka jsem zase mimo a nejsem schopen tam přehrát WM 6.5 na WM5 :-( Nevěděl by někdo jak to opravdu odemčít ( nedaří semi unlock žádnou verzí ) :-(
neviem cio ste to vyriesili ale ak nie ozvite sa.
Hello,
after a lot other flashed devices it is time to try flashing MDA C-3 (P3300, Artemis). I have T-mobile GER WM 5.0 instaled (german tmobile operator) no SIM-LOCK, and would like to install ENG WM 5.0.
Does anyone have time to explatin step-by-step procedure of flashing and which ROM to use (is it okay to use original T-Mobile UK WWE ROM for a device bought in Germany)
Tnx a lot in advance, if anyone need help to flash:
Qtek 1010, 2020, 9090, S100, S200, 9100 just send PM
To flash a new ROM you need to run USPL first:
http://forum.xda-developers.com/showthread.php?t=311403
Then you'll be able to flash any ROM you like.
For the WM5 ROM, that should be a problem... Because there isn't many WM5 ROMs arround.
But try to search in the wiki.
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
You can allways try one WM6.1 cooked ROM. But that is you to decide!
Cheers
Tnx!
I have original T-Mobile ENG WM 5.0 ROM downloaded earlyer from this location:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
But I will also try to read about WM 6.1 stability
DONE IT!
But not WM 5.0, in 10% i got some error-not a suitable ROM (TMOUK WM 5 ROM).
So I downloaded WM 6.1 Black6Blue and finished.
But when I put my SIM it blocks at splashscreen.
Remove sim, work OK.
Back SIM again- and it works!
Put IgO2006-works. This is fenomenal device. But i have no pen, and will try to use with mouse temporarely.
Best device
russco77 said:
DONE IT!
Put IgO2006-works. This is fenomenal device. But i have no pen, and will try to use with mouse temporarely.
Click to expand...
Click to collapse
Jes kad bi jos imao WiFi
Yes, but haven't WiFi
russco77 said:
DONE IT!
But not WM 5.0, in 10% i got some error-not a suitable ROM (TMOUK WM 5 ROM).
So I downloaded WM 6.1 Black6Blue and finished.
But when I put my SIM it blocks at splashscreen.
Remove sim, work OK.
Back SIM again- and it works!
Put IgO2006-works. This is fenomenal device. But i have no pen, and will try to use with mouse temporarely.
Click to expand...
Click to collapse
e rusko probaj artemis touch 4.02 bez cube i radi ko doxa
jos sam stavio iGO8 ma dere ga
i naravno pri flash-u koristi uspl,potrebno je samo 1.put,al ti nista ne znaci jos jednom...samo se osiguras,za svaki slucaj
joj jest lijepo nekom odgovorit na nasem
probaj potrazit stylus u NTCHS-u,trebali bi imati,oni su zastupnici za BiH
now in english...try using artemis touch 4.02 without cube, it works like a doxa
i put iGO8 and it runs great
and ofcourse use uspl when flashing,it's needed only the first time,but it won't harm to do it again...just to be sure,in any case
and mdaIII hasn't got wifi because it's i think arte300 model unlike p3300 which is arte100 and orbit which is arte200 which have wifi
vidi nase raje sto se mota po forumima
Potrazit cu stylus mada mogu krajem mjeseca dobiti iz germanije, 3kom cca 10EUR, za svaki slucaj
Avdo care-gdje mogu koristiti WiFi po BIH da nije sifrovana konekcija?
mozda u firmama ili u kuci
to je kao i sve drugo kod nas, bliska buducnost ali nadati se...
English:
Tnx for advice, ill try what you suggest!
Unfortunatelly there is no WiFi but in B&H is poor signal even in a capital, so this is not necessary ;-)
russco77 said:
vidi nase raje sto se mota po forumima
Potrazit cu stylus mada mogu krajem mjeseca dobiti iz germanije, 3kom cca 10EUR, za svaki slucaj
Avdo care-gdje mogu koristiti WiFi po BIH da nije sifrovana konekcija?
mozda u firmama ili u kuci
to je kao i sve drugo kod nas, bliska buducnost ali nadati se...
English:
Tnx for advice, ill try what you suggest!
Unfortunatelly there is no WiFi but in B&H is poor signal even in a capital, so this is not necessary ;-)
Click to expand...
Click to collapse
i don't use it too often...but it's nice to have it sometimes i have very good connection on some places...so i exploit it
Hi,
For all who live in Serbia, last night I called MS support in order to obtain an activation code for WP7 for my HD2, given name, surname, telephone number, and when it came to the IMEI number, I start to dictate the number that I found on the net (googloling and cleaning of image and drawing number), but the guy who answered said, no IMEI, battery serial number ?????
WTF, I do not have that number??
Astonished, apologize and sad that I have to hangup in order to verify the number because i'm calling from my HD7.
Googling for HD7 Battery and call again, same story only this time no one asked me for name, e-mail or phone number, but only for the S/N of battery (battery from the picture was made in China btw), dictate the number, wait nervously for five minutes and get a valid activation code, but unfortunately, Transcend 8 GB CL6 is not working properly with WP7, flashing, activation and installation of the market and HTC Hub programs are working great, but after the first reboot, the phone goes MAGLDR, HTC logo appears and after a few seconds restart, when I take out sd card, everything works ok, I have one Kingston 2gb but cl2 and it's all terribly slow (tried), and in Novi Sad there isn't a single card that is CL6 or stronger (except BM photo, but they weren't on the way).
I hope that this will help someone
Good luck activating
Pozdrav,
za sve koji žive u Srbiji, sinoć sam pozvao MS podršku kako bih naravno dobio aktivacioni kod za WP7 za moj HD2, naravno dao ime, prezime, broj telefona, i kada je došlo do IMEI broja, eto čuda, krenem da diktiram broj koji sam našao na netu (google, pa čišćenje slike i izvlačenje broja), ali momak koji se javio kaže, ne IMEI, serijski broj baterije?????
WTF????
Začuđen, izvinem se i kažem da moram da prekinem vezu kako bih proverio pošto zovem sa tog telefona.
Prekinem vezu i izguglam i nazovem ponovo, ista priča samo ovaj put niko ne pita za adresu niti broj telefona, već samo za broj baterije (baterija sa slike je btw made in China), izdiktiram broj, sačekam nervozno pet minuta i dobijem validan aktivacioni kod, ali na nesreću, Transcend 8 gb CL6 ne radi kako treba, flešovanje, aktivacija i instalacija programa iz marketa i HTC Hub-a rade odlično, ali posle prvog restarta, telefon prođe MGLRD, pokaže HTC logo i posle par sekundi se restartuje, kada izvadim karticu, sve radi ok, imam još jednu od 2gb ali cl2 i sa njom je sve užasno sporo, a u celom Novom Sadu nema kartice koja je jača od CL6 (izuzev BM Foto, ali mi nisu bili usput).
Nadam se da će ovo pomoći nekome
Srećno aktiviranje
GO for sandisk 8G class 4 and enjoy!!!
Hellloo
I tryied mamy firmware but always not working touch
And LCD on negative Colors.
I have a backup and worka fine but no pl language
Only difference i see od Black pcb.
Inventco said:
Hellloo
I tryied mamy firmware but always not working touch
And LCD on negative Colors.
I have a backup and worka fine but no pl language
Only difference i see od Black pcb.
Click to expand...
Click to collapse
[POLISH]
Siemanko, zrób zdjęcie chipa jak dasz rade, może postaram ci się pomóc. Na chwilę obecną nie ma edytora oprogramowania do zegarków opartych o układ MT 6261/a/d/da. Trzeba być programistą żeby wiedzieć co się robi. W każdym razie jak dalej coś tam grzebiesz z zegarkiem to napisz, może coś pomogę wytłumaczyć czy coś.
[ENGLISH]
Howdy! Please take a picture of the chip inside. I might help you with further stuff. At this moment there is no "firmware editor" for MT 6261/a/d/da watches. You must know programming language to do anything (and a software development kit idk xD). Anyway if youre still tinkering with that watch, respond maybe I can help you with something.
puedes publicar la copia de tu finware