[Q] VLC Stream and Convert/ VLC Direct Sound No Video - EVO 4G General

I have searched xda and androidcentral for an answer as to why I can't get VLC stream and Convert to work properly. I can get it to connect to my computer and with port forwarding i can connect thru 3g (not sure yet if i can with another wifi network) however I can play videos on the computer and my device but my Evo will not play the video just the sound of the movie. Does anyone know why ? or what port has to be open? I have enabled port forwarding on my netgear router device for 554.5554,8080,8081 and 1724!!
I have an error trying to play videos with VLC s/c I have searched for several days now trying to find a solution to this problem because I feel it's something on my end. However, I can not seem to fix this problem.
I have enabled the web streaming of vlc and setup seemed simple enough. I can actually use vlc s/c just like vlc remote. I can control and play videos but I get no video only audio. I have the ports forward I used portforward app to check if the ports are open which claim they are.
I use norton antivirus as my antivirus and they also control my firewall while the portforward app and my network discovery on my evo says they open. I still get no video when i play the video only audio. Even with my firewall disabled i still get no video.
Now I must admit I am a bit confused on if the ports are actually open since if this is an issue on my Evo then I should be able to view videos on the computer. However, when i perform the test and go to my ip:8080. i can do the same like on my Evo but I get no video. This makes me think the port is not open even though all my apps say they are. OH i must also add i'm not sure if this matters but portforward says 5554 is open however it was unable to ping it.
My setup i have a static ip address.
I'm trying to access for now on my LAN.
I have created a program rule and traffic rule to allow connection to and from the computers for vlc and ports 554,5554,8080,8081.
I have portforwarded on my router netgear wn 1000
I also am running a gateway windows 7.
Please any help would be [email protected]@

Did you set it for rtsp playback? If you did you should try lowering the bit rate for the video
Sent from my PC36100 using XDA App

m4xwellmurd3r said:
Did you set it for rtsp playback? If you did you should try lowering the bit rate for the video
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yes, I have. I have the port open and forwarded well portforward claims it to be as well as my network discovery. However, I get no video only audio when i access from my computer on the browser.

I have the same problem.
All of VLC Direct, AndTV and VLC Stream & Convert gets only audio, not video ;(.

Related

Remote videos

Looking for something or a way I can watch videos or stream from my MAC to EVO also able to download the files if I need to plz help sorry or music also
Sent from Da EVO
Orb Networks
I've been using Orb Networks for years. You download/setup the free server side (your computer) program then on your phone just go to mycast.orb.com and login. From there you can browse your defined folders (I've even set up file browsing on mine), pick a media file and it will stream to your phone via the browser. There is a pay app for Orb but the quality is no better than using your phone's browser. The only advantage I've found it gives you a pretty media library interface. Not worth the $ IMHO.
You will need to play with the stream settings to find the best quality for your connection rate. Seeing that flash is supported in the phone's browser I'd suggest starting there. I generally do a speed test from my browse page if I'm unsure of network quality. On our screens the playback will be a bit blocky but the up side is that if you have a tv tuner on your server you can watch live tv on your phone (or your friends phone, or your laptop, or another computer).
If you go with orb and have any other questions feel free to pm me
I can't msg u says u can't accept but is orb my only way I can't login with something else to my MAC and stream video music ect....
Lokifish said:
Orb Networks
I've been using Orb Networks for years. You download/setup the free server side (your computer) program then on your phone just go to mycast.orb.com and login. From there you can browse your defined folders (I've even set up file browsing on mine), pick a media file and it will stream to your phone via the browser. There is a pay app for Orb but the quality is no better than using your phone's browser. The only advantage I've found it gives you a pretty media library interface. Not worth the $ IMHO.
You will need to play with the stream settings to find the best quality for your connection rate. Seeing that flash is supported in the phone's browser I'd suggest starting there. I generally do a speed test from my browse page if I'm unsure of network quality. On our screens the playback will be a bit blocky but the up side is that if you have a tv tuner on your server you can watch live tv on your phone (or your friends phone, or your laptop, or another computer).
If you go with orb and have any other questions feel free to pm me
Click to expand...
Click to collapse
Sent from Da EVO
Can anyone tell me if there is.anything else I can use besides orb plz I'm sure there has to be remote something out there to stream video music ect... and to download files from mac or pc
Sent From MOB'S EVO
Can anyone tell me if there is.anything else I can use besides orb plz I'm sure there has to be remote something out there to stream video music ect... and to download files from mac or pc
Click to expand...
Click to collapse
Theres nothing else that I have seen that can stream from your computer to your phone, besides Slingbox, but thats only live tv and dvr. As far as downloading files from the mac to the phone, you can use dropbox, or use a remote desktop app.
can Orb stream .MKV files? i'm really hoping I will be able to stream using windows home server V2 when it comes out this year. They have allow streaming through internet browsers, so hopefully the Evo won't be an exception.
mobgod said:
I can't msg u says u can't accept but is orb my only way I can't login with something else to my MAC and stream video music ect....
Sent from Da EVO
Click to expand...
Click to collapse
Not sure why you can't msg me, I should be able to receive all msgs.
I've looked into other options but have always come back to Orb. My main reason has been I need 3 or 4 different programs to do what Orb does and may of those require both host and client apps. Another reason has been in order to change settings in many of programs, they require that you be at the host computer.
Hairongreenfire said:
can Orb stream .MKV files? i'm really hoping I will be able to stream using windows home server V2 when it comes out this year. They have allow streaming through internet browsers, so hopefully the Evo won't be an exception.
Click to expand...
Click to collapse
.MKV works but there's reports of sync issues. All Orb really does is transcode then stream your media in the format you select in your settings
some people stream using vlc and the vlc client for android
Subsonic will do this with very slight modification. See my post here: http://forum.xda-developers.com/showthread.php?t=789717&page=2
The file locations will be different for a mac, but it's nothing a quick search can't solve ;-)
VLC remote is said to be a good choice as well
Sent from my PC36100 using Tapatalk

[App] VLC Stream & Convert

VLC Stream & Convert
hxxp://traveldevel.com
This software has been out for a little over 2 months and for some reason it hasnt become wildly popular. I figured id start a thread for it since the software can be quirky when setting it up. It sounds like it was a side project for the author.. it is an amazing side project. My phone has become the end all be all multimedia device. I can access my music with Subsonic and all of my Movies with this app. The only thing you need on your PC is VLC.
My EVO is 100% Stock so I do know it works with everything on the stock EVO.
Some quick tips with the EVO.
1. By default the app is set to use port 554 under the "Stream to phone (rtsp)". Change that to port 5554.
2. Wifi has to be on for the video streaming to work for some reason. You do not have to be connected to wifi, just the antenna has to be on.
3. IF you are confused by VLC and want aa quick way to set it up properly in windows (especially with the newer versions of vlc) the VLC setup tool by Hobbyist Software works great. It is a one time setup.
I've had this app for a while now and love it.
Actually, thanks to this post I figured out finally how to stream video over 3g. Didn't know the wireless had to be turned on.. weird.
Awesome being able to have my entire media collection on the go, don't have to worry about converting files or switching out what is on my sd card.
I tried setting this up before but couldn't get it to work. I believe VLC is setup correctly and I put in my computers IP (trying to do it over 3G). It never displays my files, it also doesn't give an error message or anything either. Just sits there. Any idea?
When you go to localhost:8080 in your pc browser what do you see?
donloki said:
When you go to localhost:8080 in your pc browser what do you see?
Click to expand...
Click to collapse
I see the VLC web interface. But when I put in my IP address (trying to do it over 3g and not wifi) it doesn't connect.
I made a little write up for another forum, steal anything you'd like for the OP:
Fans of Air Video on the iPhone/Pad/Touch know that there are no plans for a much requested Android port because if its reliance on Apple's AirPlay protocol.
Well for Android users there's now an equivalent alternative using VLC.
What this does:
Let you transcode and play on the fly any media file you can play with the desktop version of VLC from your desktop and stream live to your Android device over WiFi and/or a mobile network (3G/4G). VLC will stream the video via the RTSP protocol which supports live seeking of streamed content.
Orb Live also does this, but the Orb client is not free and the video quality sucks ass. The video quality using VLC transcoding is quite excellent.
Installing the RTSP Server
Quick Setup:
1.) Grab a copy of VLC, the latest version of this writing is v1.1.4 has garbled audio issues when transcoding videos with AAC, so grab the older version (1.1.3) from here:
http://www.oldapps.com/VLC_Player.php?old_vlc=53?download
2.) Start VLC and go to
A.) Tools->Preferences
B.) On the bottom left click on the "All" radio button to show all settings.
C.) On the treeview to the left exapnd the Interface tree node and select the "Main interfaces" tree item.
D.) On the right side check the "HTTP remote control interface" option and press the Save button.
Leave VLC running it will act as a streaming RTSP server with a web based file browser running by default on port 8080.
For a more advanced setup, or if you need to setup using alternate ports refer to the info here:
http://traveldevel.com/vlc-stream-convert/setup
Installing Client
Grab VLC Stream and Convert from the Market (the free version works fine and will do pretty much everything we want):
http://www.appbrain.com/app/vlc-stream-convert/com.gmail.traveldevel.android.vlc.app
Exposing VLC to the Internet for 3G/Mobile streaming
Quick Setup;
1.) On my Windows 7 firewall settings I allowed the VLC.exe public and private network access.
2.) On the router I port forwarded the default ports used by VLC for the web based file browser and RTSP server (ports 8080 and 5554 respectively). The default RTSP port may be 554, check and/or change VLC Stream & Convert to verify.
More detailed setup:
http://traveldevel.com/vlc-stream-convert/streaming-over-3g
Streaming over 3G on Froyo (Android 2.2) Workaround
Apparantly there's an issue with Froyo (experienced with my Evo 4G running stock Froyo) which locks down the ability to stream via RTSP over 3G. The work-around is to turn on the WiFi radio, even if you stream off 3G.
More info on the issue here:
http://community.htc.com/na/htc-forums/android/f/94/p/5287/23683.aspx
http://forum.androidcentral.com/htc-evo-4g/26814-htc-streaming-media-player-problems.html
Tweaking for your device:
For optimized viewing on Sprint 3G's network on my EVO 4G, I use thse settings.
1.) In the VLC Stream & Convert application type the "menu" button and tap "Settings".
2.) Under the "Stream to phone (rtsp) under the "H.264" AVC settings I set
- Video Bitrate to 512
- Width to 480
- Canvas aspect ratio : 15:9 (800:480)
- Under x264 settings I set Reference frames to 3.
3.) Under the "Playback" section set:
-Portrait video width to 480
-Landscape video width to 800
Playing Media:
http://traveldevel.com/vlc-stream-convert/usage
Thanks Talyn.... cant wait to get home and try this.
i been using my ipod touch (wifi tether) with air video to stream from home while at work but id like to not have to carry both devices everyday.
will try this later for sure
Followed the above instructions.
I can remotely control VLC, but I can't seem to get the video to run. I configured the port to 5554 and 554 (with the appropriate router changes). I also configured these ports in Windows Firewall.
I get an error stating: "Too Many Errors"
Don't know if this matters, but it is running on a Windows Home Server machine.
sw99 said:
Followed the above instructions.
I can remotely control VLC, but I can't seem to get the video to run. I configured the port to 5554 and 554 (with the appropriate router changes). I also configured these ports in Windows Firewall.
I get an error stating: "Too Many Errors"
Don't know if this matters, but it is running on a Windows Home Server machine.
Click to expand...
Click to collapse
As a troubleshooting step can you stream within your local network? Meaning don't try to connect via 3g, use the local ip address of the home server and connect within your local home network wifi. That will tell us if the issue is router/Sprint network related configuration issue.
One more thing that should be pointed out.
You are giving the entire Internet access to your files. Developer suggests that you limit your router access to your IP address, but I found that Sprint changes your IP address on a regular basis.
Wish VLC would implement some sort of security on their end.
I had to use port 554 but video playback is choppy for some reason over wifi or 3g.
^^ yeah, the security thing sucks. One solution would be to relay it via VPN but that would add a bunch of overhead. It wouldn't be too hard to write your own file browser interface with an RTSP relay, but alas who has the time....
hkkmr said:
I had to use port 554 but video playback is choppy for some reason over wifi or 3g.
Click to expand...
Click to collapse
What are the specs of the computer you're running VLC on? Might be due to it not being powerful to encode certain videos on the fly.
I have it running on a pretty beefy machine. Core i7 920 overlclocked to 3.9ghz, and I can trans code 1080p MKVs with no choppiness.
TalynOne said:
What are the specs of the computer you're running VLC on? Might be due to it not being powerful to encode certain videos on the fly.
I have it running on a pretty beefy machine. Core i7 920 overlclocked to 3.9ghz, and I can trans code 1080p MKVs with no choppiness.
Click to expand...
Click to collapse
It's older pc, Core 2 Duo 8400.
hkkmr said:
It's older pc, Core 2 Duo 8400.
Click to expand...
Click to collapse
That's still a pretty darn good processor. What's your CPU usage at when streaming videos?
Working good for me on Wifi on the local network but not when I try to connect externally. I have all the appropriate ports forwarded and it acts like it's playing.. But I get no video. No errors.. Just no video.
thenags said:
Working good for me on Wifi on the local network but not when I try to connect externally. I have all the appropriate ports forwarded and it acts like it's playing.. But I get no video. No errors.. Just no video.
Click to expand...
Click to collapse
What bitrate / horizontal width set to? How fast is your 3G connection? I usually have to wait about 10 or seconds before the video starts playing over 3G. Until then it's just black.
It's working fine for me now that I'm outside of my local network. It just wasn't working when I was on my local network and trying to connect with an external IP. Dunno why
Sent from my PC36100 using XDA App
thenags said:
It's working fine for me now that I'm outside of my local network. It just wasn't working when I was on my local network and trying to connect with an external IP. Dunno why
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ah, probably due to loopback being off on your router. Quite common.
Bumping to say I just tested this with the HDMI cable and it works fine! There's some serious nerd cred to be able stream and trascode videos on the fly over the Internet and into someone's big screen TV via your phone.

streaming from pc to epic

is there an app or program for it?
you looking for audio, video (would require on the fly reencoding for most video), in you network via wifi oe over 3 and 4g?
It is more about about your home server or pc, router, and file formats/bitrates than it is about an app on the phone
video mainly
i use ps3 media server for ps3
churro7 said:
is there an app or program for it?
Click to expand...
Click to collapse
Allshare or orb.
Sent from my SPH-D700 using Tapatalk
I use Orb. Works ok but sometimes video takes a while to start.
durhamite said:
I use Orb. Works ok but sometimes video takes a while to start.
Click to expand...
Click to collapse
I have used orb for more than 2 years. The video quality on android phone is so bad that I gave up. I tried both web and app. Too many pixelations. I heard that quality on Froyo with flash is a bit better.
Anyway, I have decided to go with a bit pricey solution. I already have media center extender in my living room that connects to my HTPC for TV viewing. I bought a slingbox solo so that I can watch TV from my phone. It's costly but it's the only solution with a watchable video quality. (The locationfree + PSP has much better quality than slingbox + android.)
I beleve twonky will. It will stream to any dlna ceryified device. Also allshare has a mode for this
Sent from my SPH-D700 using XDA App
For audio I use audio galaxy.
Sent from my SPH-D700 using XDA App
You can also use Gmote to search set directories on the server side on an HTPC through Wifi and stream the videos to your phone.
churro7 said:
is there an app or program for it?
Click to expand...
Click to collapse
There are many options but none is perfect. It depends on what audio/video format you want to stream.
For example, if it's an avi file, many apps will work such as allshare, gmote. But if it's a WTV file (TV recording), then your option is very limited.
mkvs and avis?
IMHO it isn't a question of mkv or avi. Mainly it is a question of are the bitrate of the videos qhihch has nothing to do with container.
Next is what is your home connection upload speed? is it .3mps max? If that is the case the bitrates are going to have to be less than 75% of that. That is going to mean manually or on the fly transcoding server side.
So server side upload speeds, and server side bitrates need to be addressed first.
Orb does this, but pretty poorly.
it would be over wifi but my uploads are around 500KB/s

Does anyone get DNLA to work ?

Hey, any1 using the DNLA yet ?
if so, how do you get it to work ?
Mine can't find the destination media, only the phone show up.
What are you using? I use my PS3
Sent from my HTC Glacier using XDA App
Connected yes, actually play anything with any watchable quality no.
I used Media Player 12 in window 7, but it doesn't work.
I've also used it on my PS3 but it tends to have some issues from time to time.
Working great through wifi using iMediashare tool on my Desire and LG BD390 bluray player. No special options though.
Sent from my HTC Desire using Tapatalk
Yes, fully functional.
1 Desktop/Server
1 Mediacenter
2 Laptops
2 mt4g
Using nothing more then the media sharing capabilities built into win7 + divx. Using twonky I am able to play anything shared on my main library to any device running win7 and the built in windows media player with the appropriate setting.
in win7, just make sure you have your libraries shared. With that, your phone, using twonky, should see the upnp/dlna server and be able to play music. I have a collection of mostly divx video, this u cannot play on the phone. I am still hoping for a divx/xvid codec..
If you have a mediacenter/server setup. Ensure your win7 libraries are shared on the library and you can see these shared libraries on your win7 mediacenter. If you can, run windows media player on the mediacenter. Under the Stream menu button check the option to "Allow Remote Control of My Player". Confirm this option and you will now see it on your phone using twonky. You will be able to play music/movies to your mediacenter because it should have the capabilities of decoding the video.
Going further, I have internet access enabled on my media. I can access everything I have from anywhere I have. Haven't tried to do this on my phone yet.. But I prob will sometime. I think the solution may be as simple as a vpn connection to my home network.
Let me know if you have any specific questions...
I did samething you told me to do in win7, but i got error " No permission to access server/service"
I can see it in my phone now.
Works perfectly with my WDTV Live player...
But I'm certainly interested in what nicholasb has to say about the streaming home content via VPN.... if I'm not mistaken.

[Q] Are you able to watch 1080p movies with Nexus 10?

Hi,
When I bought the Nexus 10, my original thought was to use it to watch movies. Meaning, stream video from my pc using the wifi LAN (I also thought to use it as a streamer by connecting it to my TV via HDMI, but that's another story).
However, this doesn't work right. There are many movies that appear laggy/jumpy/buggy on the Nexus 10 itself (even without connecting it to a TV via HDMI).
Especially when I try to play high quality 1080p mkv files (about 10GB-15GB per movie). I don't have issues with lower quality 720p movies/series, but half the 1080p movies I just can't play right.
I have tried the following players: MX player, BS player, VLC beta, XMBC for android.
My benchmark is Avatar (exteneded) mkv 1080p, a 15GB size file. The only player that was able to play it is BS player, and only when I set it to use the "experimental HW decoding". But even that way, the fps seems to be a bit low. All other players play this movie like a powerpoint presentation, slide by slide...
I thought that the Nexus 10 hardware is strong enough to play 1080p movies. But now I'm not sure. Is it hardware limitation? is it the players fault that doesn't use properly the N10 hardware?
I a bit frustrated here, any help is appreciated!
did you try to put the file on your N10 instead of streaming it? That will rule out any potential WIFI bottleneck which may occur with files that size. Just to be sure. I cannot offer any other advice unfortunately.
Animor said:
Hi,
When I bought the Nexus 10, my original thought was to use it to watch movies. Meaning, stream video from my pc using the wifi LAN (I also thought to use it as a streamer by connecting it to my TV via HDMI, but that's another story).
However, this doesn't work right. There are many movies that appear laggy/jumpy/buggy on the Nexus 10 itself (even without connecting it to a TV via HDMI).
Especially when I try to play high quality 1080p mkv files (about 10GB-15GB per movie). I don't have issues with lower quality 720p movies/series, but half the 1080p movies I just can't play right.
I have tried the following players: MX player, BS player, VLC beta, XMBC for android.
My benchmark is Avatar (exteneded) mkv 1080p, a 15GB size file. The only player that was able to play it is BS player, and only when I set it to use the "experimental HW decoding". But even that way, the fps seems to be a bit low. All other players play this movie like a powerpoint presentation, slide by slide...
I thought that the Nexus 10 hardware is strong enough to play 1080p movies. But now I'm not sure. Is it hardware limitation? is it the players fault that doesn't use properly the N10 hardware?
I a bit frustrated here, any help is appreciated!
Click to expand...
Click to collapse
Have you tried MX player's hw+ mode? Also try dice player. I have tried a higher resolution than 1080 and it worked fine in MX but it was mp4!
As I have no bluray remuxes or space on my tablet to try them, I have downloaded the test video called "Birds" from here, 40 mbps bluray remux and with MX player I can play it using HW codec with no stutter or lag. With SW Codec it has stutter and through network stream from PC with SW codec it stutters as well, and HW codec doesn't seem to work at all through network stream
I hope this helps.
Thank you all for your help!
I have made several trials according to your advices. The problem is indeed the wifi.
I have copied a movie that didn't run well through wifi to my N10 ("The Host" - 12GB), and it ran just fine with both BS and MX!
I have also tried "birds" from the post above me. When I tried to run it through wifi:
- MX player with hw+ was completely stuck on the first picture.
- BS player with experimental decoding was very bad, but a bit better than MX.
I have tried it with the N10 very close to the router, so it's not bad wifi reception.
When I copied "birds" file to my N10, it ran just fine with both MX and BS. Since it's 40mps bluray, it's much heavier than any of my 10-15GB movies in terms of mpbs.
Anyway, the problem is indeed caused by the wifi, which is a major bottleneck. Now the question is where is exactly the problem: the router (I have N type router)? N10 wifi? my computer wired Ethernet connection to the router?
How do regular streamers work with 1080p content?
Can I do anything to fix this bottleneck? Perhaps a better router?
What if I use usb OTG and connect USB DOK directly to the N10, do you think it may work?
Thanks again for your help!
Ah glad you got it to work finally. Yes the router can play a part in it, however if you are happy with your wifi setup otherwise (stability, range etc) I would not change the router just for this. There is no guarantee that a different router may indeed play your file without hiccups. It may also be that the tablet wifi is not up to the task of streaming the movies, but this is just an assumption on my part.
The cheapest solution, while not the most comfortable one, would be to use an OTG cable and a nice 64GB USB stick and just fill that with movies when you want to watch them. Maybe you can find more info on the net regarding streaming and wifi issues and solutions, but be ready to drop some cash for those routers.
EDIT: there is some good info in this thread http://forums.smallnetbuilder.com/showthread.php?t=7761
EDIT2: and here http://forums.smallnetbuilder.com/showthread.php?t=2755
I have the same router type N, cheap one that came free from my ISP, talktalk, and exactly the same issues when trying to play through network. I know that when trying to copy something through LAN from my PC to my tablet via ES File Explorer, it only downloads at 300KB/s, which is slower then when I download something off the internet at 1.8MB/s (which is the maximum I get from my ISP) so this leads me to believe that the problem isn't the router, because it can download fast enough for 1080p (maybe not fast enough for that "birds" test at 40mbps, though) this leaves the protocol that android uses to talk to windows PC, the Samba share or something like that.
Do you use windows as well? I'm thinking of trying to stream through a linux share, see how that goes.
I also use Windows - I've defined a user with password on windows and I connect to the workgroup on my pc with it. Perhaps you are right and this is the issue. Please update if you find a faster way to stream.
What if we use an external hdd which will connect to the router? You think it might help?
Sent from my GT-I9300 using Tapatalk 4
Animor said:
I also use Windows - I've defined a user with password on windows and I connect to the workgroup on my pc with it. Perhaps you are right and this is the issue. Please update if you find a faster way to stream.
What if we use an external hdd which will connect to the router? You think it might help?
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Hey, I've made some good progress.
I downloaded an app called MediaHouse UPnP / DLNA Browser from app store and a uPnP server (I used XBMC - all I had to do to set it up after installing it was to add my movies folder under videos and then go into system>settings>services>uPnP and select share video and libraries trough UPnP) and that's it. Then I just open MediaHouse on my Nexus 10 (leave xbmc in background on pc) and browse my files... It works much better then the normal share: I can play movies that I couldn't play before with MX Player and play them using HW+ decoder. The "Birds" demo isn't great but it's much better, I had the best results using bs player, but still a bit laggy, but since you say your videos aren't quite that high in bitrate, maybe you'll get lucky.
I hope this helps. Bye
bv90andy said:
Hey, I've made some good progress.
I downloaded an app called MediaHouse UPnP / DLNA Browser from app store and a uPnP server (I used XBMC - all I had to do to set it up after installing it was to add my movies folder under videos and then go into system>settings>services>uPnP and select share video and libraries trough UPnP) and that's it. Then I just open MediaHouse on my Nexus 10 (leave xbmc in background on pc) and browse my files... It works much better then the normal share: I can play movies that I couldn't play before with MX Player and play them using HW+ decoder. The "Birds" demo isn't great but it's much better, I had the best results using bs player, but still a bit laggy, but since you say your videos aren't quite that high in bitrate, maybe you'll get lucky.
I hope this helps. Bye
Click to expand...
Click to collapse
Thank you, this is indeed a very good progress. I was able to play 1080p movies!
Only problem is I can't stream .srt subtitles files along with the movie. The srt file is at the same directory of the movie. XMBC on my pc plays the subtitles, but on my N10 using MediaHouse, it's just being ignored.
Any advice?
Animor said:
Thank you, this is indeed a very good progress. I was able to play 1080p movies!
Only problem is I can't stream .srt subtitles files along with the movie. The srt file is at the same directory of the movie. XMBC on my pc plays the subtitles, but on my N10 using MediaHouse, it's just being ignored.
Any advice?
Click to expand...
Click to collapse
OK, apparently uPnP doesn't support subtitles, but I have been able to copy the sub file over, normally, using ES file explorer and then, after you load the movie via mediahouse, in mx player you can click on menu>subtitles>open and select the file from your local storage where you saved it.
I hope this works.
Don't forget to click the thanks button
Thank you. This is not so comfortable, but I guess it should work.
I have posted a question to the author of mediaHouse, perhaps there is a more elegant solution...
Animor said:
Thank you all for your help!
I have made several trials according to your advices. The problem is indeed the wifi.
I have copied a movie that didn't run well through wifi to my N10 ("The Host" - 12GB), and it ran just fine with both BS and MX!
I have also tried "birds" from the post above me. When I tried to run it through wifi:
- MX player with hw+ was completely stuck on the first picture.
- BS player with experimental decoding was very bad, but a bit better than MX.
I have tried it with the N10 very close to the router, so it's not bad wifi reception.
When I copied "birds" file to my N10, it ran just fine with both MX and BS. Since it's 40mps bluray, it's much heavier than any of my 10-15GB movies in terms of mpbs.
Anyway, the problem is indeed caused by the wifi, which is a major bottleneck. Now the question is where is exactly the problem: the router (I have N type router)? N10 wifi? my computer wired Ethernet connection to the router?
How do regular streamers work with 1080p content?
Can I do anything to fix this bottleneck? Perhaps a better router?
What if I use usb OTG and connect USB DOK directly to the N10, do you think it may work?
Thanks again for your help!
Click to expand...
Click to collapse
Here is an alternate OTG solution that I use for HD content of all types.(OTG USB Gigabit Ethernet adapter). Just a thought. Note that the drivers for this adapter are in the stock ROM.
http://goo.gl/v2nwLa
I've found another solution:
Using MKVmerge, you can easily merge mkv and srt file. It takes only 2-3 minutes for a movie. Output file is mkv file with embedded subtitles. I've checked it and MX player shows the subtitles just fine via MediaHouse.
Download from here.
Hi!
It took a while but I read the whole thread! I'm happy that you mostly solved your issue, about the Wi-Fi issue it's caused by your LAN speed, I use my old Xoom as media server here, sometimes it becomes really laggy, I solved this problem connecting both the devices (Nexus 10 and Xoom) on my S4 hotspot, believe this is FAST! Using SuperBeam app I usually get from 35-40Mbps. I think most of the android phones with hotspot functionality may have good speeds.
I use Bubble UPnP BTW! Also, if you think too uncomfortable having to manually select your subtitle, I believe BS Player still downloads it automatically and put on auto too. It used to do this with me, I don't know if it still downloads .
Well, those are just some more alternatives you may want to try . As there are some good solutions over there!
All the best,
~Lord
Great news, people!
 @bv90andy
I have found a way to stream external srt subtitles along with the movie, using uPnP.
Apparently, only some uPnP media servers and clients support it. In addition, only some movie players can extract this information when streamed through uPnP. I've found several such uPnP media servers, but most of them require payment after a trial period. However, I've managed to find one that doesn't!
So, in order to stream videos with external srt, you need the following:
1. Serviio on you PC.
2. BubbleUPnP on your android device.
3. MX player on your android device.
4. The srt file should have the same name of the movie file, and they have to reside both at the same directory in your PC.
Enjoy!
ps:
XxLordxX said:
about the Wi-Fi issue it's caused by your LAN speed
Click to expand...
Click to collapse
You are mistaken - read again the thread. The bottleneck is not the LAN speed or the router, it's smb/cisf protocol, which is too slow to stream 1080p videos. Using uPnP protocol instead of smb/cisf, over the same LAN and with the same router, we have managed to solves the issue.
Animor said:
Great news, people!
@bv90andy
I have found a way to stream external srt subtitles along with the movie, using uPnP.
Apparently, only some uPnP media servers and clients support it. In addition, only some movie players can extract this information when streamed through uPnP. I've found several such uPnP media servers, but most of them require payment after a trial period. However, I've managed to find one that doesn't!
So, in order to stream videos with external srt, you need the following:
1. Serviio on you PC.
2. BubbleUPnP on your android device.
3. MX player on your android device.
4. The srt file should have the same name of the movie file, and they have to reside both at the same directory in your PC.
Enjoy!
ps:You are mistaken - read again the thread. The bottleneck is not the LAN speed or the router, it's smb/cisf protocol, which is too slow to stream 1080p videos. Using uPnP protocol instead of smb/cisf, over the same LAN and with the same router, we have managed to solves the issue.
Click to expand...
Click to collapse
Thanks for sharing that.

Categories

Resources