G2: BRICKED? please help - G2 and Desire Z General

WHAT I DID:
From stock ROM, albeit rooted -
opened ROM Manager
chose to download CM7rc2, also ticked Google bundle
allowed it to do its thing
Could not log into Google account, same as with CM6 - why does it hate me?
decided to flash back to previous backup
This is where everything goes wrong
I got stuck at the "htc" boot screen forever. Waited more than 5 minutes.
Pulled battery.
Tried to restore other recovery images.
Most recent attempt: started a recovery, came back to phone, and noticed the power is off. It will not power back on. Am I just screwed?

Wait so can you get into recovery? Did it run out of battery?
Also a nandroid might take more the 5 mins to boot if you had a lot of information in it.

Related

Stuck at "HTC Incredible" Boot SCreen

Any assistance is appreciated.
I rooted a few days ago and did the forever S-off. I have ROM Manager loaded and was poking around in the system. I downloaded Skyraider and ROM Manager asked me to reboot. Not thinking it wouldn't let me know what it was doing when in recovery before doing something the rom had been applied. Now the Phone has for 40+ minutes been at the "HTC Incredible" boot screen.
I have read not to pull the battery but The power Button and Volume button do nothing so I could really use some suggestions. As a little more info I have not flashed the radio yet so it was a 1.x radio that a 2.2 rom was just seemingly applied to.
Bricked or recoverable? I have a Nandroid backup if someone can help me get back to that point...
pull the battery out this happened to me before... pull it out and go into recovery mode ... first download on your pc 1.0 baseband .. then while in recovery load that into your sd...then install it to your phone... that will take your phone back to when you first got it out of the box... after that load up baseband 2.0 then root then raider
You could also try booting into cwm recovery and do a wipe data/cache
Did you get past the boot screen?
I am also stuck on the boot screen.
With some advising to pull the battery I did so. It did allow me to boot to recovery and I restored the backup I had taken. I am back up and running as if nothing had happened. I will revisit flashing the radio to the right version and trying the rom again soon.

Bricked and won't boot following attempted Samsung update (16GB Wifi Retail)

A message popped up from Samsung to install an update (I had been pressing cancel for the past week on this update). It says click OK to reboot and apply update (something along those lines) so I do. Now I am stuck with a tablet that won't boot. If I hold the power button it says "Samsung Galaxy 10.1" after about 12 seconds, but then it goes away and back to darkness. Nothing else. Holding power and volume up does nothing.
Someone know what is going on and have any idea how to resolve?
The best way is to restore any backup you have from cwm recovery. Else grab a stock firmware and flash it with ODIN or if zip than CWM recovery. For luck, try clearing cache and data in recovery, first!Perhaps it may work saving you all fuss of flashing a firmware.
I cannot even boot that far too get into recovery. And I just noticed that although I can't boot, the backlight is on (on a solid black screen).... wtf
You can't hold volume down and power button to enter recovery?
Nope. I plugged into my computer and for some reason with the USB connectd it let me enter recovery. Flashed a backup and rebooted, but now I have no wifi... im confused.
it occured once to me when i tried to overclock, it never worked except when installing a new rom... Try to root the device and then install a new rom
OK, was a helluva night messing with ROM and kernel installs... I have yet to go back to completely stock (that's next up tonight, unfortunately), but I installed Starburst ROM and the Wifi still didn't work so I then installed pershoot's kernel and now when I boot the screen is extremely distorted kind of like this: http://t1.gstatic.com/images?q=tbn:ANd9GcTsKa5IoQxnesGdUjykWDDggoQZ38yZ2VXSgPAQ09NOCnETzl9-
As a side note, when I say the wifi is not working, it still shows all networks and allows me to connect just like normal. However when connected no apps can access the network...
Can someone point me to a thread on how to revert EVERYTHING back to stock so I can start fresh? TIA!!
http://forum.xda-developers.com/showthread.php?t=1171089
Should have all the files you need. From where you are now I would flash the stock OTA 3.1 or TW then flash the stock recovery and do a factory reset from that recovery. That should get rid of the garbled screen.
Thanks buddy. On my way to grab the files now
I heard the update was pulled as it sometimes rewrites the bootloader improperly. You might need to send it in, unfortunately.

[Q] How to reboot into recovery?

I rooted my G2 about two months ago. I'm currently using MIUI, not the latest but the one before it. Somehow, my phone got turned off and when I tried to turn it back on, it was stuck in a bootloop. I have a custom recovery image so I don't know if that affects anything. I tried to reboot into recovery by pressing volume down and power, nothing happened. I then did volume up and power. It vibrated three times and the orange light started flashing. I pulled the battery and now when I try to turn it on, nothing happens. So how do I reboot into recovery and so I can restore my backup? Any help/suggestions would be greatly appreciated.
Never pull the battery during something like that. It sounds like your bricked. Someone else confirm?
I don't think it's bricked. I plugged it up and then Clockwork came up so I selected reboot now. Clockwork came up again so I tried to restore my latest backup and the screen went black. I'm going to let it charge and then give it another try.
Ok good. That's lucky because whenever you pull on a boot like that, it usually bricks. If you have the option, try to re-flash your ROM. Maybe even try stock. If you were getting a black screen, it's most likely you flashed incorrectly.
Ok, I was able to boot into recovery and now I'm restoring my backup. I don't think I had a custom recovery image with this one so hopefully I won't get stuck in a bootloop. When you say stock, do you mean before I flashed MIUI (it was the first rom I flashed)? Thank you for your suggestions and all of your help.
first install adb on you PC, it helps a lot in these kind of cases.
1. try "adb logcat", it would tell you about what's going on in your machine.
2. once you get your adb working, try "adb reboot recovery" to see if it could boot your phone in recovery.
3. if after doing everything you fail to boot either your phone or in recovery then try using PC10IMG to boot a stock rom and then re-root your phone.
I got it back working. For some reason, I'm just starting to think that it needed charging (the battery had been out for about a day or two). I do have adb installed and configured on my computer since I needed it to root. Thank you for your suggestions, I will definitely rember them if this happens again.
lol of course when you get black screen and led blnking means your battery begging for juice, you're lucky that when the phone booted back in recovery and you tried to restore a backup the phone went off before actually starting to restore, that would've bricked your phone
DO NOT FLASH ANYTHING WITHOUT AT LEAST 40% OF JUICE LEFT

Emergency help; Stuck at LG logo

Solved!
Please buy hyelton a beer or a damn new phone. He's a hero.
This worked: http://forum.xda-developers.com/showthread.php?t=2432476&highlight=decrypt
Hey guys, but of an emergency here...
I'm stuck at the LG logo after flashing the Pacman ROM with the latest unofficial CWM, and it seems to have failed at Formatting system. All four touch buttons on the bottom were blue, as if they had been pressed and highlighted. No response from anything.
Reboot. Then it got stuck on the LG logo. I can't access CWM anymore, holding power + vol down does nothing, I just go back to the logo. I'm running a D802.
This was a pretty standard flash for me, I have done this many times, so I was confident in it, but now have no way back into a phone I desperately need within hours.
Process went as follows;
Full wipe, format, initialize install, it failed/crashed/whatever, rebooted, now stuck on logo, unable to access CWM, and obviously unable to access ROM.
USB Debugging was on, but as the ROM doesn't exist anymore, not sure how much help that'll be.
I'll gladly go back to either CWM or TWRP, as well as stock ROM or whatever. I can sort all that out later, right now just need things back in running order.
Edit1: I can't even turn it off. It simply boots up again, so now also worried of damaging display or battery.
Edit2: It's not showing after entering "adb devices". List is empty.
ANY help appreciated.
I'm running Windows 8, and no, I will not be able to reinstall to W7 or Ubuntu.
Thank you

[Q] AT&T LG G2 won't boot

I've been messing around with my phone, trying to flash CWM and CyanogenMod (to no avail), and yesterday something happened. I woke up, my phone was dead so I started charging it. It booted into the Stock OS (the one that ships with the G2--build D20010o I think). Shortly after, a message appeared on the screen about an update the phone was going to install (I'm assuming one that AT&T was pushing to my phone), and shortly after it powered down on its own. I have not been able to get it to boot into the OS since.
Before all of this happened, I rooted the phone with IORoot, tried to flash CWM (I think successfully), but was not able to install CyanogenMod, so I flashed an earlier build of the stock OS (D20010o), rooted it again (I'm not sure that I had to--I think it stated that my phone was already rooted), tried to flash CWM again (unsuccessfully this time), and I gave up. Then this problem occurred.
Every time I try to power on the phone, the LG logo flashes, and the screen stays on, but it's black. If I try to do a factory reset via the hardware buttons, I am able to see that screen, but as soon as I follow the instructions of pressing the power button twice, it says that it's initializing the reset, but then the phone's screen goes black again--not sure if the screen is on or off, though. The LED light is also not on during any of this.
I'm unsure what to do. I've had the phone for about 6 months, but I had not owned an Android before that--iPhone user for 3 years. I obviously did not do enough research or ask enough questions, but I would like my phone to be in a usable state. I would greatly appreciate any help that anyone can give me!
NEVER take an OTA with a recovery.
Use the lg flash tool to go back to stock
http://forum.xda-developers.com/showthread.php?t=2432476
Sorry, should have also mentioned that I can't boot into Download Mode. I'm assuming there's no .kdz file for AT&T, and the other method in that link requires Download Mode. :/

Categories

Resources