Hey
i just rooted my phone and installed "setCpu", but i cant set the max higher than 806Mhz. (Which the cpu is running on normally)
so any1 know if it is possible?
If you have a factory rom than no
lobfredd said:
Hey
i just rooted my phone and installed "setCpu", but i cant set the max higher than 806Mhz. (Which the cpu is running on normally)
so any1 know if it is possible?
Click to expand...
Click to collapse
It is possible but it would require a custom overclocked kernel.
A overclocked kernel has been released in hiapk.com . It makes your u8800 running well at 1G mhz. Many have rested the kernel and you can use setcpu now . Just visit hiapk, if you understand chinese^o^
Any chinese to translate the instruction? It's inconvenient to do it with cellphone
Sent from my u8800 using XDA App
i post it.
extracted from this post: http://bbs.hiapk.com/thread-1220423-1-1.html
首先说明以下几点：
1、本人以及作者“凡人@天使”对使用此补丁所造成的一切后果不负任何责任，此补丁可能会让您失去保修的权利，使用前请谨记。
2、使用前请务必备份原Boot.img,以便在出现问题或者不想使用的时候可以替换回去，切记！
3、默认开机以后频率为1056，如需降频请自行安装软件，如SETCPU。
4、Android小白及一般使用者不建议打此补丁。
5、切勿跨版本替换，否则会导致机器热量升高。
6、该帖及内核可以转载，但务必注明原帖出处及注意事项！
如果您能明白以上几点，那么请往下看！
Click to expand...
Click to collapse
A few points to note:
1. i myself and the author “[email protected]” do not hold responsibility on any consequence by applying the patch. be reminded that the patch may void your warranty.
2. remember to back up the original "boot.img", so that you may restore when problem arises or when you simply wanna revert. this is important!
3. default max CPU frequency after boot is 1056, use tools, such as SetCPU, to reduce if needed.
4. Android newbies or ordinary users are not recommended to apply the patch.
5. do not replace file not matching the (ROM) version, otherwise it may cause overheat in the phone.
6. this message and the associated files can be posted elsewhere, given that the original location and notes are also displayed.
if you can understand the above points, keep reading.
使用方法
1、检查SD卡内是否有dload文件夹，如果有，请将其移动或者改名。在检查无误后关机。
2、关机后 同时按住 ”音量+“ ”音量-“ ”开机键“ 等待机器出现粉屏后方可松手。
3、连接USB，并安装驱动。（WIN7会自动安装，XP未知）
4、我的电脑内会出现大容量存储设备，打开以后可以看到Boot.img等文件。
5、备份你的Boot.img到电脑中,将下载的超频版boot.img放到手机的大容量存储设备中替换。
6、删除USB设备，然后抠掉手机电池再放上。
7、开机。
Click to expand...
Click to collapse
usage
1. check if there is "dload" directory in the SD card, if yes, remove the card or rename the directory. switch off the phone after checking.
2. press "vol+", "vol-" and "power" buttons and release when the pink screen appears
3. connect USB, and install driver. (WIN7 installs automatically, XP not sure)
4. a mass storage device appears under "My Computer", find "boot.img" file, along with other files, inside.
5. back up (original) "boot.img" to your computer, put the downloaded "boot.img" into the mass storage device to replace the original one.
6. disconnect USB, take battery out and put it back
7. power up.
个人测试说明：
1、耗电量并无明显增加。
2、发热量无明显增加！
3、自动降频没有问题！
Click to expand...
Click to collapse
from my own tests:
1. battery drain does not increase significantly!
2. heat generated does not increase significantly!
3. no problem found with auto CPU frequency reducing!
下载地址：
联通158版下载地址
http://u.115.com/file/f331406338
http://dl.dbank.com/c0mer7oio6
（数据银行下载不支持迅雷）
马来西亚136版下载地址
http://u.115.com/file/f334674ec7
http://dl.dbank.com/c0brwtmzqh
（数据银行下载不支持迅雷）
Click to expand...
Click to collapse
download links:
Unicom 158 version:
http://u.115.com/file/f331406338
http://dl.dbank.com/c0mer7oio6
(xunlei (note: a popular download manager used in china) not supported by dbank)
Malaysian 136 version:
http://u.115.com/file/f334674ec7
http://dl.dbank.com/c0brwtmzqh
(xunlei not supported by dbank)
so with my hk version, should i wait for the right "boot.img" to show, or just go ahead and apply one of the above ones (since it mentions possible overheat as the only side-effect)?
iamelton said:
so with my hk version, should i wait for the right "boot.img" to show, or just go ahead and apply one of the above ones (since it mentions possible overheat as the only side-effect)?
Click to expand...
Click to collapse
It's not recommended to use anyone above ,the deeveloper just made the file bases on two ROMs mentioned above ,others are not tested and may brick your phone .
It's not recommended to use anyone above ,the deeveloper just made the file bases on two ROMs mentioned above ,others are not tested and may brick your phone .
The chinese vision mentioned the risk .
Sent from my u8800 using XDA App
Sent from my u8800 using XDA App
Once my battery calibration is done I'm going to have to try this
So the new Aust version of the Kernel, which do we download?
yeah！I just overlock my U8800/X5.
do you have wifi i lost wifi when i did it anyone know why
admantium said:
do you have wifi i lost wifi when i did it anyone know why
Click to expand...
Click to collapse
wrong version you download.
If you have a factory rom than no
iamelton said:
so with my hk version, should i wait for the right "boot.img" to show, or just go ahead and apply one of the above ones (since it mentions possible overheat as the only side-effect)?
Click to expand...
Click to collapse
they have updated with other roms. bellow is for hk:
港版超频内核（4月21日新增）
http://u.115.com/file/f35ab823ae
http://dl.dbank.com/c0fe16f7su
文件: C:\Users\Saber\Desktop\超频内核\boot.img
大小: 5263360 字节
修改时间: 2011年4月21日, 17:29:45
MD5: CAF522E94478F21A14183DFA2DC1FE2F
SHA1: E7BBDE07C604D90471F82F461C9E3A778DB266E5
CRC32: 11E5FA4B
shsh_ustc said:
they have updated with other roms. bellow is for hk:
港版超频内核（4月21日新增）
http://u.115.com/file/f35ab823ae
http://dl.dbank.com/c0fe16f7su
文件: C:\Users\Saber\Desktop\超频内核\boot.img
大小: 5263360 字节
修改时间: 2011年4月21日, 17:29:45
MD5: CAF522E94478F21A14183DFA2DC1FE2F
SHA1: E7BBDE07C604D90471F82F461C9E3A778DB266E5
CRC32: 11E5FA4B
Click to expand...
Click to collapse
thx for ur info..
actually i provided the original "boot.img" so that the overclocking image could be produced..
Help?!
I don't understand.
So I must use another rom out of the origional rom if I need to use this boot.img?
Otherwise I can't use wifi??
I use hk rom..
Related
If I have a Nexus S running version 2.3.2 with Build number GRH78C how do I update? My phone is all stock. Many thanks..
desiregeek said:
If I have a Nexus S running version 2.3.2 with Build number GRH78C how do I update? My phone is all stock. Many thanks..
Click to expand...
Click to collapse
I'm currently compiling all the various updates for 2.3.4, According to Google, you should get an update to bring you right up to 2.3.4, if you can give me the baseband model, i'll add it to the OTA's that are still missing for 2.3.4
http://forum.xda-developers.com/showthread.php?t=1056062
Baseband version I9020XXJK8
Build number GRH78C
desiregeek said:
Baseband version I9020XXJK8
Build number GRH78C
Click to expand...
Click to collapse
I've added it. BTW, if you don't mind wiping the phone, you can do a stock 2.3.3 image, then upgrade to the .4, links can be found in my first post.
No need to wipe. Just manually apply the 2.3.3 update. Then do the 2.3.4 update manually too.
Sent from my Nexus S
theimpaler said:
No need to wipe. Just manually apply the 2.3.3 update. Then do the 2.3.4 update manually too.
Sent from my Nexus S
Click to expand...
Click to collapse
Couldn't get a manual update done. I am in Asia now. Special way to do this?
desiregeek said:
Couldn't get a manual update done. I am in Asia now. Special way to do this?
Click to expand...
Click to collapse
What was wrong with the manual update?
theimpaler said:
What was wrong with the manual update?
Click to expand...
Click to collapse
Nothing happens after. How is this manual update done that you are talking about. I'm a newbie so please excuse my stupidity.
desiregeek said:
Nothing happens after. How is this manual update done that you are talking about. I'm a newbie so please excuse my stupidity.
Click to expand...
Click to collapse
No problems although you could find your answers on the forum if you searched. But for simplicity...
Here's my instructions for moving from 2.3.2 GRH78C to 2.3.4 GRJ22. (amalgamated from various sources...) Let me know how you go with them.
Charge phone to 80% or more!
1. As you are running 2.3.2 GRH78C first download this to your computer:
http://android.clients.google.com/packages/ota/google_crespo/98f3836cef9e.signed-soju-GRI40-from-GRH78C.98f3836c.zip
2. Plug in your Nexus S to your PC (or mac), switch on USB Storage and copy the file from wherever you saved it to the root of the removable disk (your nexus S)
3. rename the file "update.zip"
4. Disconnect your NS, and shut it down.
5. Holding down the volume up button, press the power button. You should boot into the "bootloader" (big android logo and some options)
6. Use the volume keys to highlight the "recovery" option, then press the power button (it works like a select button here)
7. Your screen will show "google" then a open box and a little android man, then this will turn to an exclamation mark inside a triangle.
8. Press the power and up buttons again, then select "apply update from /sdcard" as before using the up and down keys and the power button
9. select "update.zip" and press the power key - the phone should then update to 2.3.3
10. Once it is completed (check the status bar) select "reboot system now"
11. Complete!
Once your phone reboots you will have 2.3.3. Repeat the same process as above but with this file instead to go to 2.3.4: http://android.clients.google.com/packages/ota/google_crespo/a14a2dd09749.signed-soju-GRJ22-from-GRI40.a14a2dd0.zip
Remember to remove the 2.3.3 "update.zip" from your Nexus S before copying over the 2.3.4 update.zip
Many thanks for the kind reply with details. On number 2 you say to the root. Isn't it just copy and paste ?
desiregeek said:
Many thanks for the kind reply with details. On number 2 you say to the root. Isn't it just copy and paste ?
Click to expand...
Click to collapse
Yeah, copy and paste to the "root directory" of the Nexus S internal Flash Storage. (When I say "root" in the instructions I don't mean "root" as in rooting your android phone to enable super user, I mean the "top level directory" of the Nexus S storage)
Hope that's clearer
theimpaler said:
Yeah, copy and paste to the "root directory" of the Nexus S internal Flash Storage. (When I say "root" in the instructions I don't mean "root" as in rooting your android phone to enable super user, I mean the "top level directory" of the Nexus S storage)
Hope that's clearer
Click to expand...
Click to collapse
This is where I am a bit lost. Basically just copy and paste it on that file of which I see on my screen,right?
PS: Many thanks for your patience and help
desiregeek said:
This is where I am a bit lost. Basically just copy and paste it on that file of which I see on my screen,right?
PS: Many thanks for your patience and help
Click to expand...
Click to collapse
Haha Ok I'll break it down just to make it clearer (as I didn't quite understand what your last post meant - sorry!)
1. Download the file
2. Copy the file you just downloaded from your pc (copy the file you see on your pc screen that you just downloaded)
3. Paste it onto your Nexus S (in other words, don't put it in any folders!)
4. Follow the rest of the instructions
If this still doesn't make sense I'll try again!
When I tried to apply update, it failed with following message.
Assert failed: apply_patch_check("/system/framework/framework-res.apk". (status 7)
I think the reason is that I have used percentage battery framework. Does anyone know where I could get the 2.3.2 stock framework-res.apk ?
Many thanks,
Hi I would like to update my phone from stock 2.3.1 (build number GRH78 and baseband version I9020XXJK8) to latest possible.please let me know how do I do? Please provide me the links also.
Thanks & regards
T. Sriramakrishna
Sent from my Nexus S using XDA App
turagaramki said:
Hi I would like to update my phone from stock 2.3.1 (build number GRH78 and baseband version I9020XXJK8) to latest possible.please let me know how do I do? Please provide me the links also.
Thanks & regards
T. Sriramakrishna
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Please search the forums, this question has been answered many times already (by me and many others).. but as I am nice... follow the instructions posted higher up. As you are on GRH78 you need to use this file to go from 2.3.1 to 2.3.3 instead of the first one posted in my instructions
(2.3.1 GRH78 to 2.3.3 GRI40) http://android.clients.google.com/packages/ota/google_crespo/e0b546c442bf.signed-soju-GRI40-from-GRH78.e0b546c4.zip
then use the later file from my instructions to go from 2.3.3 GRI40 to 2.3.4 GRJ22
Any problems message back...
Many thanks for the kind reply and details. I will update on this as soon as I try it out. I forgot my USB cord at my shop so I can not do this tonight. I have two laptops and tried to do it at my shop today using my Apple MBP but that was useless since I was unable to rename the file on my Apple so I will bring back home the USB cable tomorrow and try again tomorrow.
Freakin Apple won't allow us to rename them files
2.3.3 worked perfectly and the screen turned yellowish as everyone reported. I applied the zip 2.3.4 file and it also worked perfectly. Many thanks for the kind reply and help with details. So far the only thing I find wrong is that the colors are a bit different from what they were. I think I liked them more before.
desiregeek said:
2.3.3 worked perfectly and the screen turned yellowish as everyone reported. I applied the zip 2.3.4 file and it also worked perfectly. Many thanks for the kind reply and help with details. So far the only thing I find wrong is that the colors are a bit different from what they were. I think I liked them more before.
Click to expand...
Click to collapse
No problems! glad I could help I found the colours a bit off-putting at first too but I got used to them after a while
theimpaler said:
No problems! glad I could help I found the colours a bit off-putting at first too but I got used to them after a while
Click to expand...
Click to collapse
Everything worked smoothly. Thanks again for everything
New update is up!
Version is : V100R001C00B528G001
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
Upgrade How-to
It has all languages android have!
This upgrade need to accomplish 1 upgrade package’s upgrade in the one step below, the file name can’t be revised:
Step1: include UPDATE.APP
- Prepare a formatted Micro SD card which at least has 512MB available space. Make sure your handset is powered off and then insert the MICRO SD card into the handset.
- Make a “dload” directory on SD card root directory
- Copy the “Step 1\ dload\UPDATE.APP” to SD card.
- Long press volume up + volume down + power button on the handset to startup you device until device into upgrade model, the handset will upgrade and shutdown automatically.
- After upgrade success , Restart the handset.
- It will reboot few times.
- Check the Build number is 100R001C00B528G001 . You can see it in “Settings”->”About Phone”..
Possible bugs!
- When the wifi open and screen is off phone reboots.
- Some phone gets imei=0 (please backup your imei)
- Not sure but I have network issues. Sometimes my phone gets "unreachable" state even I have 4 bars.
- There is a widget problem, "The widget loading problem" after each reboot.
- On calls your sound is very husky. You can try to solve changing build.prop "ro.config.dualmic=true" to "ro.config.dualmic=false"
- Some users reported screen lag, freezes and and glicthes.
- Sound (your sound from calls) not very good.
- Widgets get "The problem loading widget" on every reboot.
- Haptic feedback not work on capatitive keys.
Warnings!
- There is no safe way for downgrading.
Downgrading!
I go back to cm7 like this;
- Copy B138 dload to internal memory - This is important.
Power off your phone go to pink screen. Notice: you can't go the pink scren without sd-card. So, after copying dload directory insert sd card.
- Go to pink screen
- In pink screen, I replace all the files from my 2.2 backup. (If you don't do that, downgrade not work. Its failed step 2/2)
- Remove sdcard from phone and start the B138 update like always.
- After installing phone should open normally.
- Once your phone open normally, you can install cwm and flash any rom you want it.
I noticed cwm data backups not works, I don't know why its not worked. Maybe some experience person can explain that to us.
- Please notice, Even if this version worked on my phone, that doesn't mean it will work for you. You can try, I'm not responsoble of anything
Mirrors for those who hates china internet connection speeds too:
http://www.uploadstation.com/file/DBH479d
http://ul.to/3qi60wcj
http://www.fileserve.com/file/FmWvum2/U8800_V100R001C17B517G001_Tommix_China_sucks.zip
http://www.filesonic.cz/file/4048086954
http://uploadbox.com/files/1d337e044c
http://www.crocko.com/85045EFF9D6E4...00_V100R001C17B517G001_Tommix_China_sucks.zip
Epic fail. Its don't include market or gapps!
Cannot download, seems fine until downloaded the half size and after that goes very fast to end, resulting a damaged archive. Maybe too many trying to download?
Anyway how you find these links?
If from that page press the label to go to index, I cannot find this link. the froyo rom, not this link.
Özgürce said:
Epic fail. Its don't include market or gapps!
Click to expand...
Click to collapse
really? what is wrong with this people?
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Mirrors
Uploaded to some mirrors as Huawei site is taking forever to download.
Mirror 1
Mirror 2
Mirror 3
Mirror 4
Mirror 5
Hope this goes faster! http://www.mediafire.com/?doievioa1ybb9zn
Hayden18 said:
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
maybe you can try this link : http://115.com/file/c2bu9jd6#
someone download from the official website and upload to the above website
why dyou even want to install this without market? I mean... seriously, no market? rofl
swayjd said:
why dyou even want to install this without market? I mean... seriously, no market? rofl
Click to expand...
Click to collapse
try installing market.apk ......
will someone post quadrant score plz
Hayden18 said:
Can someone please re-upload it to another site I got a corrupted download
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
Give me 10 minutes and I'll re-upload it.
What about installing instructions?
The pdf file in package is in Chinese.
sport_billy said:
What about installing instructions?
The pdf file in package is in Chinese.
Click to expand...
Click to collapse
Try this to translate...... http://translate.google.com/
PDF contains as fallows
11-30 Page 1 of 2
U8800 Gingerbread upgrade instructions
Reminder: 1, This package only applies to U8800, other models including U8800 + / U8800Pro are not
Using the software package in the "Settings" menu -> "About phone" menu to view models.
2, provides the official temporarily retreated from Android2.3 Android2.2 way back.
3, Brush risk, machine You need to be cautious.
1, note
a) upgrade process will erase all user data (such as contacts, SMS, MMS, etc.), the
Please be sure to upgrade before your users to backup data to an external SD card or computer.
b) Make sure the battery before upgrading to support more than 30 minutes to ensure complete support of the upgrade process.
2, the version of the functional description
This version, based on the original version of Froyo, mainly to do the following changes:
a) upgrade to the Gingerbread 2.3.5 version of the Android version.
b) In the original version of Android adds ease of use UI features and better functionality of Huawei, to better enhance the user
Use of experience.
3, the upgrade procedure
3.1 from Android 2.2.2 upgrade to Android 2.3.5 guide
This upgrade requires the following two step CPC 2 upgrade package upgrade, all file names can not be changed:
step 2 contains UPDATE.APP (G version of the function of the main package).
step 3 contains UPDATE.APP (indicated by package carriers).
3.1.1 Prepare a capacity of not less than 512M SD card;
3.1.2 SD card root directory create dload directory, copy the update step 2 in UPDATE.APP to dload
? ? ?
?
2011-11-30 Page 2 of 2
Directory, the phone off, the SD card into the phone, the (left thumb) while holding the volume up and down keys,
And (right) press the power button to turn the phone will automatically upgrade, the phone automatically shut down after the upgrade is complete, remove the
SD card;
3.1.3 step3 in UPDATE.APP replaced with an SD card dload directory UPDATE.APP, repeat
Step 3.1.2, in order to upgrade step 3 UPDATE.APP (while holding the volume down key, long press the Power
Key to boot).
3.1.5 upgrade is successful, the phone reboot to restore the factory into the interface to restore the factory is completed, the phone re-re-
Kai. Complete Android 2.3.5 version of the full upgrade.
3.1.6 Make sure the version number after boot as U8800V100R001C17B517G001, in the "Settings" menu
-> "About phone" menu, check the version number.
krish_nank said:
Try this to translate...... http://translate.google.com/
Click to expand...
Click to collapse
Thank you.I did that.
I want human translation.
If someone who speaks chinese can translate this it would be very helpfull.
286420123 said:
OK,i really doubt if you are mentally impaired,the rom is only a trial one , and only for trial in china , it is only uploaded in chinese local host,if you really want to say sth,i'll give you the reason that you country is so ..... that can't aford the expense of the international data exchange ,so you can only have a **** speed,if you want to speed up , you can just migrate!
Click to expand...
Click to collapse
Trial version means wont work after few days or is it like only testing purpose??? ...
Added root insruction. Its way too easy.
Another Mirrors for those who hates china internet connection speeds too:
http://ul.to/3qi60wcj
http://www.uploadstation.com/file/DBH479d
http://www.fileserve.com/file/FmWvum2/U8800_V100R001C17B517G001_Tommix_China_sucks.zip
http://www.filesonic.cz/file/4048086954
http://uploadbox.com/files/1d337e044c
http://www.crocko.com/85045EFF9D6E4...00_V100R001C17B517G001_Tommix_China_sucks.zip
To late, just upgraded to a Samsung galaxy note
my last ever Huawei, their after sales support sucks for every phone, why can Korea make better products than China? Better support, better phones, higher quality, China keep trying and keep failing in the support part of most products for some reason, I can't figure out if its a culture thing or a government thing that makes them not care about their customers
Sent from my GT-N7000 using XDA App
Updated tweaks are at bottom of this post
Here is a flashable zip of 3 scripts that when put together speed up your phone and make it faster.
The niftyconiptionstweaks was meant only for the HTC Evo 4g but if your phone supports "init.d" then try it out if you want to and please report back. It may not even flash in recovery because the phones are different but its worth a shot. If it works, please post saying it does and what kind of phone you have. The Legit Zip should work for any phone.
To determine if your phone supports "init.d", download a file manager like Root Explorer or ES File Explorer, go to "system", then "etc". If you come across a folder named "init.d" then your phone may support it.
I did not write these scripts, I just edited them to work like Car-O-Dopes tweaks. It basically has the same values as Car-o-Dopes tweaks. It is best to use this on a Sense rom. I used the S97ramscript, KickAssKernel, and 02sictweaks but I changed the values of each script to match what Car-o-Dopes tweaks do, and I wanted to share this with you all because it makes installing these tweaks easier and faster. Thanks to zeppelinrox for the kickasskernelizer, Juwe11 for the S97ramscript, Smokinl1337 for the 02sicktweaks, coffehandle for giving me the idea when he made his own tweaks, and Car-o-Dope for coming up with the ultimate combination of out-of-memory settings and sysctl tweaks that make your phone smooth as butter.
I use this on my HTC Evo 4g running Shooter E3D, with AnthraX kernel and it works like a charm.
I am in no way responsible if your device messes up or anything unwanted happens to it. Use at your own risk.
http://dl.dropbox.com/u/40376256/niftyconiptionstweaks.zip
Instructions: Follow Exactly
1) Make a nandroid backup incase something goes wrong or you want to revert.
2) Download a file manager like Root Explorer or ES File Explorer (I use Root explorer).
3) Open up root explorer and go to "system", then "etc", then "init.d". Click on the "Mount R/W" button so it turns to "Mount R/O" (that way you can delete files).
4) Delete any or move to a folder on your sdcard (incase you want to revert) any ram scripts or ram tweaks you may have that is in the "init.d" folder (examples of ram scripts or tweaks are 01sysctl, 06sysctl, 02sicktweaks, S97ramscript, 99supercharge, and 98Kickasskernel).
5) Also if you are running v6 supercharger, you need to un-supercharge. If you are running Kickass Kernelizer, you need to un-kernelize and do not run those scripts while you have the niftyconiptionsscripts installed.
6) Uninstall any ram manager apps or task killers and do not use these.
7) After you uninstall all of that, reboot your phone and verify that none of the scripts you had before are still installed. (it will mess with the scripts you are about to install).
8) Boot into recovery (preferably Amon Ra).
9) Once in recovery, you need to mount /system, then mount /data.
10) Find the niftyconiptionstweaks.zip you downloaded and flash it.
11) After you flash the zip, go back and unmount /system. Don't mess with the /data because after you flashed the zip, it automatically unmounted the /data for you.
12) Reboot phone and enjoy. Let your phone set at the lock screen for about 2 minutes, unlock and let it set for another 2 minutes to let it settle in. Your phone will become dramatically smoother after about an hour.
UPDATE:
Nifty Coniptions Tweaks
Updated niftyconitpionstweaks. Install just as you would before and follow directions as posted above. I got rid of some unnecessary settings in the scripts. Also your sdcard read ahead speed will change to 512kb which is the optimal value for the evo.
Sense Version
http://dl.dropbox.com/u/40376256/Nifty-v1.01/niftyconiptionstweaks-Sense-v1.01.zip
AOSP Version
http://dl.dropbox.com/u/40376256/Nifty-v1.01/niftyconiptionstweaks-AOSP-v1.01.zip
The Legit Zip
http://dl.dropbox.com/u/40376256/Nifty-v1.01/TheLegitZip.zip
Here is The Legit Zip I just put together. This has the same settings as the V6 Supercharger on option 8 and the Kickasskernalizer. I did not change any values to these so its the same as installing those two scipts manually. Again, I did not write these scripts, I just put them into a tweak bundle to make it easier to install. Thanks to zepplinrox for making the V6 supercharger and the Kickasskernalizer. To install this, follow the same instructions in the first post.
To see if the settings stuck, download Rom Toolbox Pro and go to the performance tab, Kernel tweaks or Sysctl Tweaks (depending on what version of the application you have) and see if it reads as Min Free KBytes - 4096, Dirty Ratio - 95, Dirty Background Ratio - 60, VFS Cache Pressure - 10. Then go to the Auto Memory Manager and see if it reads as 6,12,150,165,180,200.
If you would like me to add another version of the V6 Supercharger just let me know.
Have fun and hit that thanks button if you like it.
Your script are compatible with android 2.X or 4.X ?
2.x
Sent from my Nifty Shooters E3D 4g while sick with Anthrax. Hit that thanks button if I managed to help.
scottypeterson said:
2.x
Sent from my Nifty Shooters E3D 4g while sick with Anthrax. Hit that thanks button if I managed to help.
Click to expand...
Click to collapse
so that means I can use it on my GT-I9001 2.3.6 customROM ?
Work great, tks so much
Sent from my LT18i using xda premium
does this slow down internet or the phone usage?
and does it work on the lg optimus s?
amskhan1 said:
does this slow down internet or the phone usage?
and does it work on the lg optimus s?
Click to expand...
Click to collapse
This does not slow down your internet and this makes your phone run faster.
Sorry, as far as I know it won't work on the Optimus S but you can use The Legit Zip i just uploaded.
Just updated the tweaks and added a new one. The Legit Zip. Hope you all enjoy. Hit the thanks button if you do
scottypeterson said:
Just updated the tweaks and added a new one. The Legit Zip. Hope you all enjoy. Hit the thanks button if you do
Click to expand...
Click to collapse
I'm asking again if will work on sgs+ (GT-I9001) with a 2.3.6 custom rom?
Sent from my GT-I9001 using Tapatalk
chasemyass said:
I'm asking again if will work on sgs+ (GT-I9001) with a 2.3.6 custom rom?
Sent from my GT-I9001 using Tapatalk
Click to expand...
Click to collapse
Like I said in the OP. Idk if it will work or not for any other phone besides the evo, that's why I have it in this section to find out what phones it will work for. If it does, please report back, The Legit Zip should work with no problems though.
Sent from my Nifty MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.
Hey am I suppose to flash this or use terminal bkuz terminal is not working
via rebel W/ a cauze rebel rom 2.1
dswaggz said:
Hey am I suppose to flash this or use terminal bkuz terminal is not working
via rebel W/ a cauze rebel rom 2.1
Click to expand...
Click to collapse
Flash it
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
OK an should I kill any other ram type scripts or apps b4 doing so
via rebel W/ a cauze rebel rom 2.1
dswaggz said:
OK an should I kill any other ram type scripts or apps b4 doing so
via rebel W/ a cauze rebel rom 2.1
Click to expand...
Click to collapse
Yeah, read the op. All instructions are there. Just make sure you follow step by step except skip steps 9 & 11 on these updated tweaks.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
For those that remember @EarlyMon posted how to disable Swap long ago when the 5x was on Lollipop.
Well since the 5x has been updated to Marshmallow this method no longer works. So I started looking around for a solution
and I found this >> https://forum.xda-developers.com/moto-g4/development/mod-disable-zram-t3435613
Turns out this works just fine on the Honor 5x on Marshmallow.
If you'd like to give it a try, I have updated the files from the post above and uploaded them to my AFH Here
Here is a copy / paste of the instructions from the post above by @redbeard1083 ...Thanks Go to him and EarlyMon
We hate zram. This easy mod will disable it on the stock Moto G4 rom. In our experiences with disabling zram we've been able to notice performance gains on devices from 1-3gb of ram (Moto E 2015, Moto G 2014, Honor 5X, Huawei GX8).
8/13/16 Update: Now flashable via TWRP.
1. Have TWRP and MAKE A NANDROID BACKUP BEFORE YOU DO ANYTHING. I am not responsible if you break your phone. If you don't already know how to restore your device to the way it was when you bought it, do not do any of this.
2. Flash via TWRP:
Zram Off: https://www.androidfilehost.com/?fid=24588232905722629
To return to stock (I cannot promise this is exactly the same as the G4 Plus. If any G4 Plus users want to send me a hastebin of the /system/etc/init.qcom.zram.sh file to compare that would help).
Zram On: https://www.androidfilehost.com/?fid=24588232905722630
Old instructions if you prefer to do it manually:
1. Be rooted.
2. Have a stock nandroid backup.
3. Backup /system/etc/init.qcom.zram.sh to some safe place.
4. Unzip MotoG4_Zram_Disable
5. Using root file manager of your choice (I like Solid Explorer) copy init.qcom.zram.sh to /system/etc folder and overwrite the existing file.
This has been tested working on the XT1625 and likely works on the G4 Plus as well. If this works for you on a different variant, please leave a reply and I'll do my best to update this post.
Links:
Disable Zram: https://www.androidfilehost.com/?fid=24588232905722479
If for some unholy reason you'd like to turn it back on, follow the same process copying your backed up init.qcom.ram.sh file back to /system/etc.
Thanks to @EarlyMon for his edits that allow us to keep zram disabled without having to run terminal commands at every boot.
Click to expand...
Click to collapse
Again you can use my files or the ones from the original post (they both work)
Also Remember on the H5x you can Boot TWRP recovery to do the flash
Code:
fastboot boot kiwi_twrp_recovery.img
Have fun !
Reserved
thanks, I will try it.
one question tho, how can I know that zram is now disabled? like will I see an improvement in ram management or phone will be more fluid??
in my knowledge, zram manages the background process by compressing the actual process behind, (when the app is not running , but stays in the recent apps) and decompressing the task when we choose it..so this causes some lag.. and if we remove zram, the phone will be much snappy??
please correct me if I'm wrong.. thanks for your work
one question tho, im on b370 kiwl22 now, (the firmware which causes bootloops for custom roms), can i flash it??
thilak devraj said:
thanks, I will try it.
one question tho, how can I know that zram is now disabled? like will I see an improvement in ram management or phone will be more fluid??
in my knowledge, zram manages the background process by compressing the actual process behind, (when the app is not running , but stays in the recent apps) and decompressing the task when we choose it..so this causes some lag.. and if we remove zram, the phone will be much snappy??
please correct me if I'm wrong.. thanks for your work
Click to expand...
Click to collapse
I use Ram Truth to verify the swap is gone.
theirs plenty of discussion on if you want to disable it or not, start with the links i posted and follow it to the h5x thread on disabling swap
most people see an immediate improvement in the phone. zram is a stupid waste of CPU cycles on a phone with more that 1gb or ram
thilak devraj said:
one question tho, im on b370 kiwl22 now, (the firmware which causes bootloops for custom roms), can i flash it??
Click to expand...
Click to collapse
yes it should work just fine
clsA said:
I use Ram Truth to verify the swap is gone.
theirs plenty of discussion on if you want to disable it or not, start with the links i posted and follow it to the h5x thread on disabling swap
most people see an immediate improvement in the phone. zram is a stupid waste of CPU cycles on a phone with more that 1gb or ram
yes it should work just fine
Click to expand...
Click to collapse
thank you for the info and letting me know about ram truth
working like a charm.. I can see some performance improvements
after last patch update my phone performance is reduce
if open 2-3 app when shift between it app open from new
but before this i can open 7-8 app without opening new
i am trader an need opening it always
please help me i format and hard reset but isnot work good
Have you tried debloating?
KelvinCrag said:
Have you tried debloating?
Click to expand...
Click to collapse
i dont know what is it
is this need for my phone to do?
(Author's Note - I tried adding apps to debloat from the Chinese ROM, yet they come back into the system after debloating and a subsequent reboot. Hence, There is no way to remove these apps other than rooting. Please do not try using the Global ROM's script on Chinese devices, you could potentially brick your phone and your only option to recover will be factory resetting.) this note in your link.but my phone isnot chines rom
amir58hz said:
i dont know what is it
is this need for my phone to do?
(Author's Note - I tried adding apps to debloat from the Chinese ROM, yet they come back into the system after debloating and a subsequent reboot. Hence, There is no way to remove these apps other than rooting. Please do not try using the Global ROM's script on Chinese devices, you could potentially brick your phone and your only option to recover will be factory resetting.) this note in your link.but my phone isnot chines rom
Click to expand...
Click to collapse
Goto settings>apps>view system apps
You will notice lots of evenwell apps present which are also responsible for your issue. I recommend you run the script as soon as possible
KelvinCrag said:
Goto settings>apps>view system apps
You will notice lots of evenwell apps present which are also responsible for your issue. I recommend you run the script as soon as possible
Click to expand...
Click to collapse
I see this link but i cannot do it
I cannot run it in ppc.i download and connect my phone but instructions of it is so hard
I want to do it but i stoped at this level
(Double click "batch-script" and run
I see your link and download it but i cannot run it.
I stoped this level Double click "batch-script" and run)
amir58hz said:
I see your link and download it but i cannot run it.
I stoped this level Double click "batch-script" and run)
Click to expand...
Click to collapse
Have you installed adb?
If you have not installed adb, visit https://developer.android.com/studio/releases/platform-tools
While if you have, copy the script to c:/adb/platform-tools
And ensure the script ends with .bat in filename, if not rename the file to before double-clicking to run debloating.
KelvinCrag said:
If you have not installed adb, visit https://developer.android.com/studio/releases/platform-tools
While if you have, copy the script to c:/adb/platform-tools
And ensure the script ends with .bat in filename, if not rename the file to before double-clicking to run debloating.
Click to expand...
Click to collapse
thanks
i can did it now my phone problem is fix?
Thank you
I do it
I do this but have problem
When shifting between app they loading from beginning
What is problem.is need to flash?