I filled in the new settings in APN but im getting 2G instead of 3G ?
Anyone knows what i did wrong ? And the airtel "customer help" are not exactly helping me in any way.
Name: Airtel
APN: airtelgprs.com
Proxy: 100.1.200.99
Port: 8080
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MMS Protocol: <not set>
MCC: 404
MNC: 10
Authentication Type: <not set>
APN Type: <not set>
Click to expand...
Click to collapse
For Airtel mobile office your settings are ok just remove proxy and port. if you are trying to setup airtel live then apn should be airtelfun.com and proxy and port remains. most of the android phone will not display 3G instead it will show H for HSPDA. if 3G signal is weak it will switch back to edge and will show "E". try changing the mode to WCDMA only. then check.
as an alternate give these a try for data.
1. Homepage – any page you want to set.
2. User Name – Blank
3. Password – Blank
4. Proxy – Enabled/yes.
5. Proxy and Server Adress – 202.56.231.117
6. Proxy and Server Port – 8080
7. Data bearer – GPRS or Packet Data.
8. Access Point Name – airtelgprs.com
9. Authentication Type – Normal
10. Use preferred access point – No
Even I am having the same problem. My settings are correct as stated above but I am getting only 2G. 3G hasnt come up even once and I have travelled over 20 Kms across the length of Bombay, so coverage cannot be an issue. Do I need to change anything else?
Open Dialer and type this *#*#4636#*#*
Select the drop-down that says "Phone Information". From there, scroll down to where it should say "WCDMA preferred", and change it to "WCDMA only". Use the back key to get out. now check if your phone is able to detect 3G network. once it connects to 3G and you see H.
Airtel has worst network in mumbai so for phone to stay connected on 3G network signal strenght should be above -125db or else phone will switch back to 2G network. may be because of low signal stength you are not able to get 3G
smokin901 said:
Open Dialer and type this *#*#4636#*#*
Select the drop-down that says "Phone Information". From there, scroll down to where it should say "WCDMA preferred", and change it to "WCDMA only". Use the back key to get out. now check if your phone is able to detect 3G network. once it connects to 3G and you see H.
Airtel has worst network in mumbai so for phone to stay connected on 3G network signal strenght should be above -125db or else phone will switch back to 2G network. may be because of low signal stength you are not able to get 3G
Click to expand...
Click to collapse
Hey Smokin,
I tried this method to force WCDMA mode on my Samsung Captivate, but had no luck getting the 3g symbol on my phone. Instead I still have the E symbol for edge.
I have been trying since Saturday to get Airtel to put their 3g service on my phone, but had no luck. I went to a Airtel shop yesterday here in Manipal to get 3g manually activated on my phone. That didn't do any good as well.
I believe like you said that the problem isn't the activation aspect of 3g, but rather the signal strength for 3g is too low to be picked up by android phones. When I went to the Airtel shop the other day I noticed that most of the people there with working 3g phones had either a blackberry or iphone device.
If this is actually the case, I have no choice but to switch to another cell phone service provider who provides 3g service with a "android-friendly" signal strength. Is there such a thing?
Can you try with any of 3g enabled handset to see if you get 3g network in Nokia phones like n95 it should Show 3.5g. Also was your phone able to see Airtel network in wcdma only mode.
Sent from my HTC HD2 on andriod using XDA App
Hey,
I don't have any other handset with 3g capability nor do my buddies here. When I put the phone in WCDMA mode, I didn't get a signal for the GSM Airtel Network.
Apparently other Galaxy S owners have been having problems with Airtel's 3g network (Read at the comment section below: mobilegyaan.com/airtel-3g-karnataka-price).
Maybe Airtel will resolve this soon?
Edit: 3g is working now on my handset with Airtel network in Manipal.
smokin901 said:
Open Dialer and type this *#*#4636#*#*
Select the drop-down that says "Phone Information". From there, scroll down to where it should say "WCDMA preferred", and change it to "WCDMA only". Use the back key to get out. now check if your phone is able to detect 3G network. once it connects to 3G and you see H.
Airtel has worst network in mumbai so for phone to stay connected on 3G network signal strenght should be above -125db or else phone will switch back to 2G network. may be because of low signal stength you are not able to get 3G
Click to expand...
Click to collapse
Airtel launched its 3g service in Hyderabad today. And I was facing similar problems as others here. Selecting "WCDMA Only" did the trick for me and now I have the 'H' symbol on my HTC Wildfire.
However, I checked the signal strength and it is displaying -81dBm 16 asu. Does this mean I won't be able to access 3g with "WCDMA preferred" selected as I often roam and would like to fall back on 2g in the absence of 3g signal.
Also, will the above mentioned signal strength affect the call quality in any way?
Thanks for your help..
slalani said:
Airtel launched its 3g service in Hyderabad today. And I was facing similar problems as others here. Selecting "WCDMA Only" did the trick for me and now I have the 'H' symbol on my HTC Wildfire.
However, I checked the signal strength and it is displaying -81dBm 16 asu. Does this mean I won't be able to access 3g with "WCDMA preferred" selected as I often roam and would like to fall back on 2g in the absence of 3g signal.
Also, will the above mentioned signal strength affect the call quality in any way?
Thanks for your help..
Click to expand...
Click to collapse
-81dBm is greater than -124dBm it is a good signal strength. problem with WCDMA only mode is if there is no 3G signal there will be no service. best would be to keep on on WCDMA prefered.
smokin901 said:
Open Dialer and type this *#*#4636#*#*
Select the drop-down that says "Phone Information". From there, scroll down to where it should say "WCDMA preferred", and change it to "WCDMA only".
Click to expand...
Click to collapse
Hey smokin I am using airtel and by default I am getting "GSM/CDMA auto" instead of "WCDMA preferred". In order to get "WCDMA preferred" what should I do.
sriharshavr.y said:
Hey smokin I am using airtel and by default I am getting "GSM/CDMA auto" instead of "WCDMA preferred". In order to get "WCDMA preferred" what should I do.
Click to expand...
Click to collapse
Which Handset and rom?
drawback of WCDMA only is if 3G signal becomes weaker calls will drop. as you know airtel has very amazing network
Location - Hyderabad
Mobile - Samsung i9020T
Stock ROM - 2.3.3
Network Provider - Airtel.
Just change APN to Airtelgprs.com instead of airtelgprs.com (capital A for small a )
can anyone pls say me wat r da settings for 2g in airtel...xperia x10 mini....customer care's support is too low...and i tried many settings frm web...bt none is working!!
danigladson said:
can anyone pls say me wat r da settings for 2g in airtel...xperia x10 mini....customer care's support is too low...and i tried many settings frm web...bt none is working!!
Click to expand...
Click to collapse
For Airtel Mobile Office:
Name: Mobile Office
APN: airtelgprs.com
Port: 8080
Server: 202.56.231.117
MCC: 404
MNC: 90
Leave other fields blank
Search for "airtel gprs settings on android" on Google and select the link from dsynflo blog. I would have posted the link here, but the forum doesn't allow noobs to post links
smokin901 said:
Open Dialer and type this *#*#4636#*#*
Select the drop-down that says "Phone Information". From there, scroll down to where it should say "WCDMA preferred", and change it to "WCDMA only". Use the back key to get out. now check if your phone is able to detect 3G network. once it connects to 3G and you see H.
Airtel has worst network in mumbai so for phone to stay connected on 3G network signal strenght should be above -125db or else phone will switch back to 2G network. may be because of low signal stength you are not able to get 3G
Click to expand...
Click to collapse
hey smokin i have nexus s....airtel....my phone shows 3g symbol but i get only 2g speed...i did as u said....initially it was selected to gsm/cdma auto(prl) and i changed it to WCDMA only...still no change....signal strength is -83db...can u help here?
Not to sound like a completely dumb guy, but I have a Nexus One and resolved my issue by texting "3G" to 121 on Airtel. That activated 3G service and with the APN settings above, I started getting HSDPA speeds.
Hope that helps someone. Took me an hour to find that part....
So i activated 3g n put a 3g pack...
Galaxy fit..... But this goddamn Airtel gives me like 15kb/s in new Bombay....... Calling those jerks CC Temme some Bull**** that Airtel operating 3g In Maharashtra on Vodafone and Idea networks... Tells me to manually select Vodafone or idea network! (absurd! Airtel Sim registered on Vodafone network )
So i try that also... Speed 20kb/s...
Bharti mittal should resign!!
Get a Vodafone Sim... I get like 4.84mbps on cell which is terrific!!
El Che said:
I filled in the new settings in APN but im getting 2G instead of 3G ?
Anyone knows what i did wrong ? And the airtel "customer help" are not exactly helping me in any way.
Click to expand...
Click to collapse
Proxy: 100.1.200.99
This proxy is for Airtelfun not the GPRS. I switched to the other proxy 202.56.231.117
and got 3G speeds.
Have fun!
Related
I tried to get the $15 (200 meg) data package to work, but there is no signal showing up on the phone. anyone got any ideas?
Yeah. I have really good idea....... at&t sucks
-------------------------------------
Sent via the XDA Tapatalk App
They use different freqs for the different companies 3g in the states, at&t uses the "standard" freqs and tmob uses its own due to fcc regs. They may also use different flavors of 3g also(ie UMTS, HSPDA, wcdma) the acronyms are endless...
-------------------------------------
Sent via the XDA Tapatalk App
jeffbichel said:
I tried to get the $15 (200 meg) data package to work, but there is no signal showing up on the phone. anyone got any ideas?
Click to expand...
Click to collapse
Any ATT data plan should work, but only with ATT's 2G service*.
there are a few things I could think of that could be causing your problem which are separated by phone or network problems (these are all assuming your phone is searching for signal and isn't giving you any obvious errors about the sim):
PHONE PROBLEMS
1. Your MT slide is locked to WCDMA only, which won't work on ATT (see explanation below*).
2. Your unlock method didn't work.
3. Any other random prob with your handset hardware/software.
NETWORK PROBLEMS
1. You are not in a ATT 2G coverage area
3. You are in a location that the ATT 2G signal is being blocked.
2. There is an ATT network outage in your area.
The quickest way to narrow down your prob is to get a hold of an ATT phone that is working (either from a friend or an ATT store) and test your sim in that phone. that will tell you if you need to start troubleshooting your phone or your sim/att service.
*ATT uses a different frequency for their 3G coverage (ATT uses 1900 mhz and 850 mhz WCDMA as oppose to T-Mobiles 1700 mhz WCDMA). this means that if you locked your phone to WCDMA on the slide, then it is going to try to look for an ATT signal at 1700 mhz, which does not exist. Unfortunately there is no way to "re-tune" the radio hardware in most devices to operate on a different frequency, so your probably stuck with 2G only if you continue to use ATT.
the only exception that I know of is the blackberry bold 9700, in which the radio hardware actually supports all gsm/wcdma bands, and just has the "Carrier appropriate" bands enabled in the software. this may be the case with the MT slide, but I doubt it.
UMM before any of that I'M GUESSING YOU HAVE THE PROPER AT&T APN SETTINGS?? Correct?? .. if not, you need to find the att apn address and replace the stock epc address
turboyo said:
UMM before any of that I'M GUESSING YOU HAVE THE PROPER AT&T APN SETTINGS?? Correct?? .. if not, you need to find the att apn address and replace the stock epc address
Click to expand...
Click to collapse
and if this was the case what epc would we need?
No clue research it Im sure its simple to find ATT APN address ..our stock tmobile one is epc.tmobile.com
if you want something to try, try this but i have no idea if this is for att's new plans
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
turboyo said:
UMM before any of that I'M GUESSING YOU HAVE THE PROPER AT&T APN SETTINGS?? Correct?? .. if not, you need to find the att apn address and replace the stock epc address
Click to expand...
Click to collapse
The apn definately must be correct to use data once the phone finds signal and connects to ATT's network, but jeffbichel said his problem is that the phone isnt getting any signal to begin with. the apn only comes into play once your phone has already found and connected to a cell tower.
I read elsewhere that the only way to get a Slide working with 3G on AT&T is to order one destined for Roger's telecom Canada since they use the same 3g frequencies as AT&T...
You can use a TMO phone on AT&T, the 3G will not work, EDGE only. On an Android phone the APN settings must be set correctly for AT&T for the data to work.
I did not want to post this but i just got a R800a new and i am on AT&T network but the only thing i am picking up is Edge network so i was hoping maybe someone had a simple answer .
The only thing i have done with the phone is update to 2.3.3 nothing more yet.
Id like to root it next but i wanted to take it 1 step at a time.
Thank you
quazimojo said:
I did not want to post this but i just got a R800a new and i am on AT&T network but the only thing i am picking up is Edge network so i was hoping maybe someone had a simple answer .
The only thing i have done with the phone is update to 2.3.3 nothing more yet.
Id like to root it next but i wanted to take it 1 step at a time.
Thank you
Click to expand...
Click to collapse
Hmm I havent found the APN info yet for AT&T I tried a google search but there are so many different types the process is below but you will need the info. I will keep looking for APN settings.
Ok so follow these instructions.
1. Go to settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Then press menu and press New APN
Try these I'm not sure if they will work I got them from a friend who has an AT&T Atrix but that phone is 4G. You wont lose anything from trying.
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
mms protocol: wap 2.0
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Ok thanks ill give it a shot . I appreciate you trying to help .
Tried it and it does not seem to have changed anything .
Under network mode in the mobile network settings i have 3 choices also where i can pick GSM only or CDMA only or a combo preferred one and when i set it preferred the E at the top switches to an H ?.
It says i am in HSPA mode ? under phone info when i enable this ?.
I am just accustomed to seeing the 3g symbol at the top so i am not sure whats going on.
quazimojo said:
Ok thanks ill give it a shot . I appreciate you trying to help .
Tried it and it does not seem to have changed anything .
Under network mode in the mobile network settings i have 3 choices also where i can pick GSM only or CDMA only or a combo preferred one and when i set it preferred the E at the top switches to an H ?.
It says i am in HSPA mode ? under phone info when i enable this ?.
I am just accustomed to seeing the 3g symbol at the top so i am not sure whats going on.
Click to expand...
Click to collapse
H is 3G.
adb shove iPad2post.apk to /forum/thread
Yeah i was not sure if it was or was not .
All the screen caps i have seen thus far of people with the phone say 3G so i am still a little miffed atm .
quazimojo said:
Yeah i was not sure if it was or was not .
All the screen caps i have seen thus far of people with the phone say 3G so i am still a little miffed atm .
Click to expand...
Click to collapse
Np.
adb shove iPad2post.apk to /forum/thread
No problem. So is your problem solved?
If what he says is true and 3g is H then i guess it is .
Id prefer to see 3g up at the top just for the sake of it but i guess ill have to live with H .
Q&A for [Update][L5/L7][4.1.2] CM10 SBP-ROM edition [OPTIMA-TEAM]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Update][L5/L7][4.1.2] CM10 SBP-ROM edition [OPTIMA-TEAM]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi guys
I have a P705
What kernel should I choose what would work wi-fi?
Viper1311 said:
Hi guys
I have a P705
What kernel should I choose what would work wi-fi?
Click to expand...
Click to collapse
You can use phenom for cm, i use this rom and i didnt flash any karnel, every thing works, wifi is just fine.
EDIT: link to phenpm karnef, use phenonkarner+CM v1.5 for p705
Back up your rom befor flashing!
Sent from my LG-P705 using XDA Free mobile app
I downloaded the P705 version, and I noticed that it had none of the changed noted in update 12.11.14. Is it the wrong archive or wasn't the P705 version updated to 12.11.14 version?
soadroxs said:
I downloaded the P705 version, and I noticed that it had none of the changed noted in update 12.11.14. Is it the wrong archive or wasn't the P705 version updated to 12.11.14 version?
Click to expand...
Click to collapse
Oops my bad. I didnt do update for p705 il do it now. It will be updated by tomorrow
Sent from my LG-P705 using XDA Free mobile app
soadroxs said:
I downloaded the P705 version, and I noticed that it had none of the changed noted in update 12.11.14. Is it the wrong archive or wasn't the P705 version updated to 12.11.14 version?
Click to expand...
Click to collapse
heres your update for p705 https://mega.co.nz/#!wpABWRxL!yGcbKTS2zj43CMHGpPRPfmu8YGnPxh6aT7M-LKnvWoQ
Enjoy
Sent from my LG-P705 using XDA Free mobile app
For some reason, in every ROM for L7 (at least CM based), the 3G doesn't work. I still have to try 3G on stock to see if it is a problem of the ROM or the phone but after some searching, I found that I'm not the only one with this problem. I have tried going to *#*#4636#*#* menu and forcing the phone to WCDMA only but that makes me have no network service at all, only if I put it to GSM only it will work. Is there any fix for this?
soadroxs said:
For some reason, in every ROM for L7 (at least CM based), the 3G doesn't work. I still have to try 3G on stock to see if it is a problem of the ROM or the phone but after some searching, I found that I'm not the only one with this problem. I have tried going to *#*#4636#*#* menu and forcing the phone to WCDMA only but that makes me have no network service at all, only if I put it to GSM only it will work. Is there any fix for this?
Click to expand...
Click to collapse
3G works, did you try to enter settings on your phone, go mobile and network, access point names and chang from mms to gprs or wap.
Sent from my LG-P700 using XDA Free mobile app
Nesh89 said:
3G works, did you try to enter settings on your phone, go mobile and network, access point names and chang from mms to gprs or wap.
Click to expand...
Click to collapse
My Internet APN settings are these:
Name: Optimus Internet
APN: umts
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: *
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 268
MNC: 03
Authentication type: Not set
APN type: default,supl
APN protocol: IPv4
APN enabled
Bearer: Unspecified
What should I do with this? Thank you for the help, by the way!
soadroxs said:
My Internet APN settings are these:
Name: Optimus Internet
APN: umts
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: *
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 268
MNC: 03
Authentication type: Not set
APN type: default,supl
APN protocol: IPv4
APN enabled
Bearer: Unspecified
What should I do with this? Thank you for the help, by the way!
Click to expand...
Click to collapse
you need to order the gprs settings from your mobile operator.
Sent from my LG-P700 using XDA Free mobile app
---------- Post added at 09:59 PM ---------- Previous post was at 09:58 PM ----------
You enter them manually or they send you a msg with a download to set in the codes.
Sent from my LG-P700 using XDA Free mobile app
Contacted my network provider, and I configured the APN correctly as they told me, still don't get 3G, only H. It's set to GSM Auto PRL since I can't set it to WCDMA preffered, so it should be getting 3G, but I can get 3G basically nowhere in my country while my old phone (Galaxy Gio) could get 3G almost anywhere in my country.. don't know what's going on on
By the way, in the Phone info (*#*#4636#*#*) menu, when I change to WCDMA preferred, it always goes back to GSM Auto (PRL) by itself. Does the problem have to do with this?
soadroxs said:
Contacted my network provider, and I configured the APN correctly as they told me, still don't get 3G, only H. It's set to GSM Auto PRL since I can't set it to WCDMA preffered, so it should be getting 3G, but I can get 3G basically nowhere in my country while my old phone (Galaxy Gio) could get 3G almost anywhere in my country.. don't know what's going on on
By the way, in the Phone info (*#*#4636#*#*) menu, when I change to WCDMA preferred, it always goes back to GSM Auto (PRL) by itself. Does the problem have to do with this?
Click to expand...
Click to collapse
H stands for 3G HSDPA which provides theoretical speeds up to 7.2Mbps.
3G stands for 3G UMTS which provides speed to 3.6Mbps (not sure)
Its better to get H than 3G. But both stand for 3G.
Some ROMs show H, some show only 3G (like Jelly Bean Mini Project), and some show both ...
It is best to set to Auto Mode (GSM/WCDMA) or 3G preferred, rather than 3G only because in some areas where 3G isn't available, battery will drain high searching for network. In that cases, if in Auto Mode or 3G preferred, it will latch on to 2G and back to 3G when you get 3G coverage!
skyinfo said:
H stands for 3G HSDPA which provides theoretical speeds up to 7.2Mbps.
3G stands for 3G UMTS which provides speed to 3.6Mbps (not sure)
Its better to get H than 3G. But both stand for 3G.
Some ROMs show H, some show only 3G (like Jelly Bean Mini Project), and some show both ...
It is best to set to Auto Mode (GSM/WCDMA) or 3G preferred, rather than 3G only because in some areas where 3G isn't available, battery will drain high searching for network. In that cases, if in Auto Mode or 3G preferred, it will latch on to 2G and back to 3G when you get 3G coverage!
Click to expand...
Click to collapse
I'm sorry, I made a mistake. My phone doesn't show H, it only shows E! Please pardon my error
hi,
i bought a yureka, everything is great. its just that i'm unable to use 3G or LTE on my device.
it always shows edge. on my device. and runs 2G
in mobile networks preferred network type is LTE. and i have LTE service in my area.
on phone info *#*#4636#*#* By default the preferred network comes as LTE/GSM auto(PRL) and network type shows EDGE.
i have tried changing the preferred network to WCDMA preferred, then radio on/off, still network type shows as EDGE.
i have unlocked the boot loader and then flashed the modem (NONHLOS.bin) from Rohan A joshi thread in XDA yu yureka.
still im unable to use 3G or LTE.
the SIM is perfectly fine, if i put the SIM in some other phone like iphone, everything works fine.
can someone please help me i will be thankful.
Try WCDMA Only
---------- Post added at 01:38 PM ---------- Previous post was at 01:38 PM ----------
Or disabling one sim which isn't meant for internet
I am also having the same problem only edge,and phone info shows as "gsm only " no matter what I do its not changing to wcdma or any other options help
Sent from my AO5510 using Tapatalk
N'ayam Amarsh'e said:
Try WCDMA Only
---------- Post added at 01:38 PM ---------- Previous post was at 01:38 PM ----------
Or disabling one sim which isn't meant for internet
Click to expand...
Click to collapse
tried , but didnt work.
tommy2601 said:
I am also having the same problem only edge,and phone info shows as "gsm only " no matter what I do its not changing to wcdma or any other options help
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
incase you find the fix, please let me know also...
In my phone I also do the same process on phone info *#*#4636#*#* By default the preferred network comes as LTE/GSM auto(PRL) and network type shows EDGE.
i have tried changing the preferred network to WCDMA preferred, then radio on/off, still network type shows as EDGE.
still im unable to use 3G or LTE.
the SIM is perfectly fine, if i put the SIM in some other phone like iphone, everything works fine.
How to fix this problem?
pijus_cool said:
In my phone I also do the same process on phone info *#*#4636#*#* By default the preferred network comes as LTE/GSM auto(PRL) and network type shows EDGE.
i have tried changing the preferred network to WCDMA preferred, then radio on/off, still network type shows as EDGE.
still im unable to use 3G or LTE.
the SIM is perfectly fine, if i put the SIM in some other phone like iphone, everything works fine.
How to fix this problem?
Click to expand...
Click to collapse
no idea, im also still waiting for any reply
Partial solution found.... On LTE sim slot i. e. Sim no. 1 using *#4636#*#* and then select wcdma will change the network to 3g.
But 2nd sim the wcdma option not activate.
Same problem for me too
I'm also facing the same problem. Selecting WCDMA only option is not working. It always comes back to GSM only mode. End result no 3G and hence no internet. Only whatsapp is working. Should I ask for replacement. 10 days is not over for me yet..
Finally 3G actually work on YUREKA
Finally after lots of hit and trials I got solution.
Two things you need to do.
First
a.select default type as WCDMA only
b. enter *#*#4636#*#* from keypad.
c. Go to Phone Information and turn off radio.
d. Now select WCDMA only and click on turn on radio
Second
Delete ur APN settings and set the setting manually as per
your service provider. search setting on google.
Finally MY YUREKA WORKING ACTUALLY ON 3G NETWORK
Note : Preferably do all settings on SIM 1 inserted in LTE slot
WCDMA only
I did that. Fortunately this time I'm able to select WCDMA only. Device started working in 3G. Now when I go home, again 3G is gone.
Did that selecting WCDMA only again. 3G is back.
Every time I need to do this like selecting data connectivity/Wifi. I'm getting sick of this. Unfortunately 10 days period is also over
Finally 3G working..
Hey Guys,
If anyone here still facing problem with the 3G connection.
Deactivate your Mobile Data Connection.
Try going to APN setting remove the Proxy Value and Port Value then Save it.
Finally, activate your Connection.
Its working for me.
This is not a bug
check on forum
that problem of APN
how to set a default network?
soodrohit said:
hi,
i bought a yureka, everything is great. its just that i'm unable to use 3G or LTE on my device.
it always shows edge. on my device. and runs 2G
in mobile networks preferred network type is LTE. and i have LTE service in my area.
on phone info *#*#4636#*#* By default the preferred network comes as LTE/GSM auto(PRL) and network type shows EDGE.
i have tried changing the preferred network to WCDMA preferred, then radio on/off, still network type shows as EDGE.
i have unlocked the boot loader and then flashed the modem (NONHLOS.bin) from Rohan A joshi thread in XDA yu yureka.
still im unable to use 3G or LTE.
the SIM is perfectly fine, if i put the SIM in some other phone like iphone, everything works fine.
can someone please help me i will be thankful.
Click to expand...
Click to collapse
hello,
i dialed in *#*#4636#*#* and got that menu the first time i turned off radio and selected wcdma only and turned on radio then rebooted.
i dont know why but it says no network available.
so i changed it back to lte/gsm after switching off radio and then switched it back on. i got the network back still on 2g.
but now everytime i reboot it goes back to wcdma only and no network available..
how do i make lte/gsm the default network so that i dont have to keep switching networks when my phone boots up
soodrohit said:
hi,
i bought a yureka, everything is great. its just that i'm unable to use 3G or LTE on my device.
it always shows edge. on my device. and runs 2G
in mobile networks preferred network type is LTE. and i have LTE service in my area.
on phone info *#*#4636#*#* By default the preferred network comes as LTE/GSM auto(PRL) and network type shows EDGE.
i have tried changing the preferred network to WCDMA preferred, then radio on/off, still network type shows as EDGE.
i have unlocked the boot loader and then flashed the modem (NONHLOS.bin) from Rohan A joshi thread in XDA yu yureka.
still im unable to use 3G or LTE.
the SIM is perfectly fine, if i put the SIM in some other phone like iphone, everything works fine.
can someone please help me i will be thankful.
Click to expand...
Click to collapse
I have had this problem too in a while. But I guess it go resolved somehow.
First there is SIM 1 which is only good enough to run 3G or LTE networks.
I tried a lot to run it.
Sometimes switching on and off the airplane mode gave me the 3G connection.
Not sure about LTE, the national capital still doesn't support LTE.:good:
Give it a try!
Guys first of all you need to know that only SIM 1 supports 4G LTE.
and both sim slots supports 3G but you need to get activate 3G Services on your number.
i am using 3G of Aircel and its working fine for me(Sim2).
pijus_cool said:
Partial solution found.... On LTE sim slot i. e. Sim no. 1 using *#4636#*#* and then select wcdma will change the network to 3g.
But 2nd sim the wcdma option not activate.
Click to expand...
Click to collapse
I just changed to WCDMA only and 3g started working.
My issue was 3G will work for a day then changes to 2G. Then I have to remove the sim and change slot for 3G to work. Will wait and see how long this will remain 3G.
Good 2 know
anuragk098 said:
Guys first of all you need to know that only SIM 1 supports 4G LTE.
and both sim slots supports 3G but you need to get activate 3G Services on your number.
i am using 3G of Aircel and its working fine for me(Sim2).
Click to expand...
Click to collapse
Hey Anurag, Can you please post the APN details of Aircel that you have on the Yureka? I have tried that *#*#46 etc and changing SIM from SIM1 slot to SIM2 slot. No difference. Still on EDGE.
Thanks,
Kiran.
Setting as mine:
Name: Aircel
APN: aircelgprs
MCC: 405
MNC: 810
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
if still not working go to your nearest aircel service station..
powerrangerkiran said:
Hey Anurag, Can you please post the APN details of Aircel that you have on the Yureka? I have tried that *#*#46 etc and changing SIM from SIM1 slot to SIM2 slot. No difference. Still on EDGE.
Thanks,
Kiran.
Click to expand...
Click to collapse
anuragk098 said:
Setting as mine:
Name: Aircel
APN: aircelgprs
MCC: 405
MNC: 810
APN type: default,supl
APN protocol: IPv4
APN roaming protocol: IPv4
if still not working go to your nearest aircel service station..
Click to expand...
Click to collapse
Thanks Anurag. There was some issue that even though it was same setting that I had, I still could not get 3G. Anyway, I upgraded to Lollipop and the problem has been resolved. Now I can get it to work on 3G Speed itself. Same APN "aircelgprs".
Hi,
I live in NYC.
I just switched to T-Mobile today from AT&T, but now I can't get a LTE signal. I can make phone calls, send sms/mms, and even surf the web, but only with a H connection.
I can confirm my location has T-Mobile LTE since we also have an iPhone 7 on T-Mobile and with Ookla speed test the iPhone 7 is getting 38Mbps down.
I called T-Mobile tech support twice, they did refresh multiple times, still no LTE signal.
I am using the following settings:
APN: T-Mobile US LTE IPv6
Preferred network type: LTE
Network operators: auto
Mobile data: ON
Thanks in advance!
I'm using
T-Mobile US LTE
fast.t-mobile.com
APN roaming protocol: ipv4
APN type: default,supl
Preferred network type: LTE/GSM/WCDMA
System select: automatic
CDMA subscription: RUIM/SIM
Probably more details than you need but that's how I'm getting 4G. 68/22 speeds
pillowsnyc said:
I'm using
T-Mobile US LTE
fast.t-mobile.com
APN roaming protocol: ipv4
APN type: default,supl
Preferred network type: LTE/GSM/WCDMA
System select: automatic
CDMA subscription: RUIM/SIM
Probably more details than you need but that's how I'm getting 4G. 68/22 speeds
Click to expand...
Click to collapse
I tried your settings, but I'm still getting only H, and not LTE.
Any ideas?