Database Users

HTC Magic Help - Cannot recover from failed ROM initialization

Hi Everyone
I must apologize if this is a annoying beginner question but I have a problem with my HTC Magic.
I attempted to load the Fatality Hero ROM onto my HTC Magic phone. I already had the daldroid ROM running on it but wanted to try out the Hero ROM. I followed the procedure as described by individuals on the web (and I have done it before to get the daldroid ROM working). The phone was working fine with adb. I followed the following steps:
- I Selected ‘Nandroid Backup 2.1′ from the menu.
- Then selected ‘Wipe Data/factory reset’.
- Then ‘Apply sdcard:update.zip’. (The update.zip file was the fatality Hero ROM)
- I then selected ‘reboot system now’.
The phone went to the flash screen and got stuck there very very long. I then went back to flashboot but now the phone does not show up on adb devices list. This was when I just used adb to load the new ROM.
What can I do to get back into my phone? I can see fastboot and hboot. I just cant use adb anymore
This is what is displayed in fastboot:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAP10000)
CPLD-12
RADIO-3.22.20.17
Please is there anyone that can help me? And sorry if this is a obvious problem but I cant find a solution anywhere.

Sorry for the double post. An update on my situation.
I tried getting everything working in UBUNTU and the system still picks up the phone with a strange device id (not the 0bb4: 0c02 or 0bb4: 0c03 everyone refer to but a device id 0bb4: 0fff) and it still does not show up in the adb device list.
I have tried getting it to work on 3 different windows machines and 1 linux machine and no love. Is there anyone out there that can help me with this?

[HELP PLEASE] T-Mobile MYTOUCH with VODAFONE HTC Rom - AM I ROOTED?!?!?

Ok - thanks for coming in and reading my post even though you could have skipped right on through.
I have purchased a used MT3G from craigslist (i know). I am a semi-knowledgeable "veteran" when it comes to rooting and flashing on the g1 - but the mytouch is totally new to me.
I have some SERIOUS SERIOUS concerns as to what my phone even is in the first place. I bought it with original TMobile packaging, phone says tmobile in the front and back - yet when I turn it on it's VODAFONE.
When I boot into recovery, I get the Triangle Exclamation with the phone. The rom is a 1.5 HTC rom and here is my fastboot info.
PVT 32B SHIP S-ON H
HBOOT - 1.33.0009 (SAPP30000)
CPLD - 10
RADIO - 3.22.20.17
May 8th 2009
HOWEVER - when I run the "one click root" - it says I have a 32A system. Eventually I followed the instructions for 1 click root using flash rec and flashed (downloaded) the Cyan 1.4.1a from the "recovery installer" (flashrec-1.1.2 2009-0909). They said my phone was 32A, I just went ahead and downloaded and installed - now I have the cyan recovery when I boot up my phone - I just can't flash ANY roms. I tried RAv 1.6 - for both 32B and 32A. 32A keeps rebooting my phone over and over, 32B just sits at the vodafone and hangs for 15 minutes.
After HOURS AND HOURS of reading the forms and the wiki - I'm at a complete impasse. I need some guidance. Do I have a 32A or 32B? Is it possible for 32A phones to show 32B in the fastboot? Some people need a "goldcard" to do this - I just used flashrec did I do something wrong? It seems as if some people are flashing roms with their regular SPLs - do I need engineering SPL - if so HOW do I flash SPL and radio without bricking.
I just want to flash some damn roms, or even get back to OEM and get my phone up to 1.6. It's such a bad feeling buying a phone, then bringing it home and you don't realize what you've gotten......I just want to get my phone rooted and start flashing roms and I've gotten this far.
ANY HELP GREATLY APPRECIATED!!!!!!!!
edit - the only way I've gotten my phone back to the stock HTC MAGIC rom is luckily upon first running of the CYAN recovery I did a nandroid backup and just restored to my backup after the failed rom flashes.
EDIT 2pm CST : I called T-Mobile, they can track your IMEI and Sim card every time you place a call - they CONFIRMED that my IMEI belonged to a TMOBILE MYTOUCH 3G and not any european phone. This leads me to my next question - is it possible to flash this HTC MAGIC rom onto a TMOBILE MYTOUCH 3G through fastboot, or something - WITHOUT a recovery, WITHOUT having root?
My MYTOUCH 3G is running VODAFONE everything, and it's definitely a EUROPEAN HTC MAGIC rom. Did someone install something on this phone before I got it. Please community - any help is appreciated.

A possible explanation is that someone followed Amon_RA's instructions partway through but did not finish. Specifically, they may have flashed the SPL, the recovery image for 32A and then a ROM for 32A. Since the phone is 32B, the recommendation is then to update the radio and recovery and ROM for 32B after it is rooted.
Perhaps this person rooted the phone, and then did not revert to 32B. Just a guess, though.

ok bro first lets calm down. everything is fine. all the information you need is right in front of you. first if its from europe it could be 32b and or 32a. so to check if you have root lets download a terminal app. if you dont have one pm and ill send you one. once we have that run it and type
su
if it asks for permission or just goes to
#
you are good. now type cat /proc/meminfo
for "MemTotal:" if it says 98024 or around there then you have a 32b. there that took care of what kind of board you have now we have radio and splash. your radio is .009. eng radio is .006. most likely the person that had the phone before only did have the steps. so go over them again with doing a "real" rooting. make a goldcard, get a good rec .img and have sdk working on your comp. if you need help i can help the best i can.

my touch 3g problem!! please help!!!
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please

Turn it on while holding the Home key and tell us what you get? If you get a menu of options then you have a custom recovery image and you can flash a new rom ... if you just get an image of a ! then you have the stock recovery image.
Also turn it on while holding the back key, give us the information from that screen (also known as the fastboot screen) as this will tell us what recovery options are available to you.

I feel you man.
richboii8939 said:
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please
Click to expand...
Click to collapse
I worked for T-Mobile and got a mytouch before launch. My MyTouch, During the 32B radio flash, fell off my desk, disconnected, and has been stuck where you are ever since.
doing MANY hours of research and trying VARIOUS different methods did not help. I since bought another, (and a nexus. DO NOT MISS THE MYTOUCH) rooted it and my original MT3G, is still stuck on Vodafone red boot screen, and has a hopefully semi-permanent place in the bottom of my shame drawer.
Mine will not respond to Goldcards, and is not picked up by ADB.
If you plug your phone in, on boot and it is recognized by ADB, then you have hope. If its completely shot like mine. I doubt you'll be able to revive it. Unless ive been missing something since July of last year. (I had it early lol).
If it is recognized.
I would...
-Get a 32B radio
-Open CMD in the radio's folder (Shift + Right click will add a button in your right click to Open Command Prompt There)
-Fastboot flash radio <insert file name here>.zip
-Adb will say "Waiting for Device"
-IF IT IS RECOGNIZED It should reboot into Fastboot and flash the Radio and you should be okay.
*Please correct me if I'm wrong. Im can root all day long, but i can barely explain it. XD*

How can I delete a SAPPIMG ?

Hello,
I have a HTC Magic (32B - SFR - France).
Earlier today, I tried to install a SAPPIMG without knowing what I was doing.
The SAPPIMG comes from http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
Now, when I start the phone, I have the setup wizard which want me to connect to my Google Account.
The problem is that the phone is now on the T-Mobile network.
So I have not the 3G and I can't use the phone.
I tried to install another ROM but I can't, the phone doesn't let me run any fastboot command.
Before, I tried a SAPPIMG for SFR - Vodafone but it don't want install too. It noticed me with a "CID incorrect" error.
I don't know what to do...
Can you help me ?
Thank you.

I'm thinking you should root your phone flash a compatible 32B ROM then go ahead and apply the SFS nbh file. It makes sense but I'm still somewhat of a noob still with all this, so wait and see if someone has a better plan.

I think I can't do anything with the phone because I can't create a Gold Card...

Goldcards are necessary if you have a perfect SPL but if you had one you couldn't have flashed Cyan's ROM.
Can't you go into fastboot mode by starting the device holding the "back" and "home" buttons? That would be strange if you can get to the setup screen.

Hello,
I wan't to use the luo's ROM wich is located at http://forums.smartphonefrance.info/viewtopic.php?t=54838
Luo's recommend to use the recovery-RA-sapphire-v1.5.2G.img recovery (my device is a 32B) and this SPL Engineering SPL 1.33.2010.
I can go into fastboot by holding starting and back button, I have the screen with the 3 androids but when i try any fastboot command over DoS, I have the following error: FAILED (remote: not allow).
I have now access to my phone, I managed to connect to the SFR Network.

I'm sorry I thought it was a cyanogen build that you'd flashed. I should have red a little more on the wiki page.
so you're right you need a goldcard now if you want to switch ROMs :-(
http://forum.xda-developers.com/showthread.php?t=548218
Good to hear that you could at least get access to the current one though

I have two problems with http://forum.xda-developers.com/showthread.php?t=548218.
1 - I can't create a Gold Card because I don't know how to get the CID of my SD Card.
2 - I don't understand what Amon_RA means when he says "Copy the required sappimg.nbh/zip to the Goldcard."
I have the correct sappimg.nbh (I hope !) but I don't know how to copy the sappimg to the goldcard file that I have not...

I'm sorry I can't help you more on this topic as I have no experience with goldcards. I believe you can use ADB to get the cid and that the "required sappimg" Amon_RA is talking about is one of the three under "NBH/ZIP".
I suggest you do a search in the dev forum, there are already a lot of threads about this problem
maybe this one will get some helpful answers, it's recent:
http://forum.xda-developers.com/showthread.php?t=599350

I'll check it.
Thank you so much for your help swissp

Okay, I've created a goldcard and successfully reflashed my phone with de SFR's default firmware.
But I'm not totally happy.
I can't access any fastboot command but the command fastboot devices show my phone and it's the only command I can run.
What can I do now for unlock fastboot commands ?

cid incorrect
Id card:
02544d5344323536287199028b0075d2
Invert:
0075008b0299712836353244534d5402
Use many sammimg:
ROM v2.53.707.2 (Engineerings SPL v1.33.2010) - MD5 : F9674D19BE5F949D0D9DC99714D210E3
ROM v2.16.707.3 (NON-Perfected stock SPL v1.33.0009) - MD5 : DC391E4A3FC57861D7197C151176ED96
And other....
But no.... Help.... I've oper other thread....
Good morning

[Q] My HTC myTouch keeps rebooting,freezing,no touch?

Ok first off I am new to all of this. This Is my first android smartphone It's a T-Mobile MyTouch 3g. I just bought It off eBay and If I can't fix It then I am out some money PLEASE HELP!!
Have done some reading but can't seem to fix what's going on with this phone . I got It off eBay and the seller said It had problems with the touch screen every so often but other wise worked great In every other way but that Is so so far from the truth.
When you first turn It on It will boot up to the sim pin screen. I have gotten the touch screen to respond long enough to enter my pin once. It will freeze and reboot over and over. The track ball will work once In a while along with the home and back buttons.
I know It's running Superfly TCBY Froyo ROM and I think thats were all the problems are because It does work right every so often so I have been trying to unroot It and put It back to factory rom and settings and start fresh with the hopes that It will fix the problems but the problem now Is when I go into recovery to flash It or make any kinds of changes, It will freeze and reset. I can't even get the recovery menu to work long enough to do anything. Can someone please explain how I can get this phone back to original.
PLEASE HELP

We need your fastboot information. Turn the phone on holding back+power and post the info you see here.

Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
fastboot

Search the forums for "unroot mytouch 1.2" and that'll get you straightened out.
Sent from my LG-P500 using Tapatalk

OK well I did a search and have been doing alot of reading and I managed to get It to load a Generic MyTouch Rom w/Root because when I try to unroot to SAPPIMG Sapphire T-Mobile US 2.10.531.4 release i keep getting main version older update failed so I read to go to a Generic MyTouch Rom w/Root and try again from here
"theunlockr.com/2010/04/26/how-to-load-a-custom-rom-on-the-htc-mytouch-3g"
Still same problem main version older update failed. I can't create a Goldcard to try the Goldcard method because I don't have access to the phone to enable USB debugging. I can't do much with the phone because of the freezing.
I can get Into fastboot and hboot but It still freezes. So I know It's not bricked but touch Is still not working. can load the phone up but pretty much becomes a good paper weigh after a few minutes on. The buttons will not responded, no touch, no access to to anything Inside the phone.
What can I do? Is this phone worthless? Can It be fixed? I feel like I just bought a expensive paper weigh.
As I said before I am hoping that If I can get It back to original settings and rom that It will stop freezing, stop rebooting and the touch, buttons, and system will work right.. What do you think Is causing all of these problems?? No touch, Freezing, rebooting?? How can I get It back to being unrooted and running the original software/rom PLEASE HELP.....

If you have access to recovery you can flash an engineering SPL and the just flash the stock sappimg again and it'll work. I can link ya in a minute.
Sent from my LG-P500 using Tapatalk

I just flashed Engineering SPL 1.33.2005 after doing some research. waiting for It to format cache after flash and reboot. hope this works?
Fast boot info now
sapphire unknown 32a eng s-off h
hboot-1.33.2005 (sapp31000)
cpld-13
radio-2.22.23.02
apr 20 2009,15:30:43
Tried to flash original sappimg got this
Parsing...[SD ZIP]
[1] BOOTLOADER - OK
[2] RADIO V2 - OK
[3] SPLASH1 - OK
[4] RECOVERY - OK
[5] BOOT - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - Fail-PU
Partition update fail!
Update Fail!
now It has went back to
Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
when i flash the recovery and boot it just goes to the green mytouch splash screen and does nothing.. if i try to boot into recovery manually with power and home it goes to the black screen with the exclamation triangle and a phone...

I can still get Into HBOOT and FASTBOOT but I can not get Into the recovery menu and the phone will not load pass the MyTouch 3g screen.
How can I flash a new recovery img via hboot?
[What I "know"]
My understanding is that I have a Shipment SPL aka "Perfect SPL" with Security on which means I cannot use fastboot.
I also get a "Main version is older. Update failed" when I try to down grade and unroot.
[My Goal]
I want to change my SPL to a engineering one, unroot and get back to stock.

Your going to need to make a goldcard, which means you will need a phone that runs Android. Any phone running Android will work. You can use the guide from here to make it. You'll only need the other phone for Part III steps 1-5 from that guide. Once you get the goldcard made, put this file on it, boot into hboot and flash like you did the other sappimg. That will get you the engineering SPL. Then from fastboot, run this command:
Code:
fastboot erase system
Then, put this SAPPIMG on your regular SD card (or you can replace the other sappimg on your goldcard) and flash it from hboot. Hopefully something in the system partition is corrupted and the wipe will fix it so that the sappimg can write the new system properly.

First off THANK YOU DonJuan692006 for all of your help.. I would love to make a gold card because I think that would solve all of my problems but I don't have access to another phone that runs Android that's why I have not tried that yet. I have no way to make a gold card. I have extra SD Cards but no other phone that runs Android to complete It and my phone will not allow me to do any of that at this point. What else can I do?? Is there any other way to make a gold card?

I will have access to another phone that runs Android In a few days but until then I am stuck.

I have now made a gold card, got the engineering spl Installed and then tried to Install the other file and It gets stuck on system unzipping while updating and then reboots. what can I do now???

Were you able to do the fastboot erase system before trying the second sappimg?
Sent from my LG-P500 using Tapatalk

No I was not able to do that. I have done alot of reading over the last few weeks and I still don't understand how to enter commands In fastboot. So thats why it didn't work?

That was kind of the point in flashing the engineering SPL. All you do is download the AndroidSDK kit. Extract it to somewhere you can find it. Inside of that folder will be a folder called Tools with the fastboot.exe. So you just open a command prompt from there and do the command in my other post.
So, if you were to extract AndroidSDK to the root of your C: drive (as I did), you would simply open a command prompt window by typing "cmd" in either the run box on Windows XP or the "Search" box in Windows Vista and 7, and then type
Code:
cd C:\AndroidSDK\Tools\
Alternatively, if your using Windows Vista or Windows 7, you can navigate in Windows Explorer to the Tools folder and launch a command prompt directly from that folder by holding Shift and right-clicking. There will be an extra option in the menu "Open command window here". Make sure that you don't right click on a file, right-click somewhere in the a blank are in the folder.
Sent from my LG-P500 using Tapatalk

Ok, I understand. I have AndroidSDK Installed. Needed It to make the goldcard. I understand how to do It know. Thanks again for all your help. I will try again the right way and get back.

[Q] Some serious problems with Magic 32A.

Hi,
First of all, let me tell you what happened. I have had a standard htc magic with sense UI (perfected spl) so I done everything what was needed to upgrade my phone to other ROM. Everything was ok untill my girlfriend told me next day that she can't call me. I tried to call her, an it works but in other direction doesn't. So I decided to downgrade radio and engeniering SPL to flash other ROM and everytime I was trying to downgrade radio the phone screen turns dark. After a couple of times I came up with an idea to simply use patched RUU aplication to do it. This time it won't work either. Whats more the phone turned into s-on and it only boots into something like fastboot screen but there's nothing more like some informations about radio and stuff and RUU. And here is my question.
What can I do with my phone to bring him to life?
Is it posible to make a goldcard synthetically, I mean without pluging phone into USB to get some codes?
ps: Sorry about my english. I think my phone is more important at this time.

possible solution
Hello there,
yes, you can read the CID of an SD card from your pc too.
the CID is basically a serial number for your SD.
since S in SD stands for secure, some programmers can limit their applications to run only in the SD they were installed to by verifying the CID.
anyway, if you can access HBOOT mode (vol down + power), it would be a lot simpler flashing a basic RUU rom, then root it, install a recovery and do whatever you want.
If you choose to follow this method, I suggest you to restore a RUU with android 1.5 or 1.6, it's easier to root and you're sure everything will work. i heard 2.x version of android sotck roms for htc magic can have some problems in rooting process.
good luck to you!

I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/

mikamikamika said:
I will try to get the CID of my SD card, but what's more complicated is that whatever way I want to turn my phone on it only boots with something like fastboot screen, but instead of options to choose on the screen i there's only RUU and when i plug-in the USB cable the sign changes into RUU USB. So accesing any other mode is imposible. Only the blue light mode works. :/
Click to expand...
Click to collapse
What carrier is your phone from and what is your current hboot info? You should be able to see it from the RUU fastboot-like screen.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

hboot info:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
The phone works in Orange PL
I would be very thankful if You, or anyone could help.

Download this, plug your phone into the computer and turn it on so that you have "RUU USB" on the screen, the double-click the downloaded file and run it. See if that gets you anywhere.

The same situation as later. Everything goes ok until the radio is being updated, then the screen fades black. The whole process ends at 36%.

Your going to have to see if mumilover adds his comments here.
Sent from my HTC Glacier using Tapatalk

Hi, Not sure if this helps, check out this thread as it is a good source and also there is an article on flashing without the sd card. http://forum.xda-developers.com/showthread.php?p=12210523#post12210523

mikamikamika said:
sapphire PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Click to expand...
Click to collapse
You got radio/spl combo mismatch.
Run this command and give us the result:
Code:
fastboot getvar version-main
Are you sure that the above info is correct and updated?

version-main is 3.05.401.1
I made a mistake, hboot is actually 1.76.0008.