hello
I've just bought a folio100 (that's why I'm here ^^) and installed dexter 1.4
btw very good job !!!
I've installed documents to go 3.0 and i've an error "unsupported device sgh-t849"
I've read it's a problem with build.prop and it could be repear.
I don't know what i've to change in this file...
Someone could explain me the change I've to do in build.prop ??
thanks a lot and sorry for my bad english
I answer to myself
in fact I've uninstalled dtg and installed dtg from android market and not from toshiba.
now it's ok
Related
Hello guys, i'm new here, i am a noob programmer and trying to get something to work but its just driving me nuts.
i need to add arabic locale to windows Mobile 6.1, so i replaced the wince.nls, it worked but the hopper failed miserably, itried using small applications like "usemynls.exe" but it didnt work too well with the hopper either, i need help, and i will pay for it, plz if you have any idea about what am talking about message me or post here and i will appreciate that, i dunno how much a task like this would cost so we can discuss this,
thank you
whatr device?
pm me with a download location for your current kitchen
and I would try.
Olioaglio
yo guys
hey guys, i didnt think this problem is this hard!
anyhelp plz?
hello
come on guys i really need oyur help! anything would help!
Search for Paragon or Lingvosoft (I don't exactly remember which), one of them has localization packs for most languages. You said You are willing to pay for it, so buy the soft.
EDIT: sorry, it was not Paragon It was Penreader - http://www.penreader.com/windows-mobile-software/Language_Extender/Language_Extender_Arabic.html
Thnx aiiro but..
i want to fix this for my own project, so am still looking for a freelancer, thnx
OK, I understand. But as I am no coder, I have no further ideas, except maybe You could still get the soft and look at what it does/replaces during installation - that could help You get forward.
Over & out.
dump arabic language sys from any device and use its language files in your sys
like
0409=english
0407=german
get files corrosponding to arabic (you can dump an official arabic ROM to get these)
thnx sheennick123456 but thats not what i need, i want to know why hopper gets mad when i replace the wince.nls, thnx anyway
still nothing guys?
Come on guys! i really need your help wit hthis one and its not going to be free
is there any real programmer in this joint?
may i know what device you are using??
The wincenls probably goes mad as it doesn't have all the resources. Dump an Arabic SYS, grab of the resources, rebuild it, and then try.
I use Arabizer
try attachment
and see this site http://www.ce4arab.com/vb7/forumdisplay.php?f=1
Hello community ,
i flashed the Rom on this page here on my T-Mobile G1(HTC Dream):
http://forum.xda-developers.com/showthread.php?t=950765
I ask me now how can I use AndRootFile as a File-Manager.
I find my Apps that I want to install from SD, but if I click on this .apk, then AndRootFile goes back...and nothing works
My second Question is: Where can I get GAPPS(i mean Android Market) for this ROM?
Thanks for every help
JustinApple
P.S. Sorry for this many English mistakes(I am really bad in English)
hello, in the past i used to change the product code from gtp6800 to gtp7500 im talking about the sistem file named build.prop, i do this to allow my device to play all gameloft games compatible with the galaxy tab 10. In the past i washappy with it and all works good. Now with ics i have tray to change the same file, but when i reboot, the tablet won't start and i must refresh the firmware in order to restore my tablet. Someone can help me? Sameone know why this trick dont works? Thanks sorry for my bad english but i am italian
Raziel_Sicily said:
hello, in the past i used to change the product code from gtp6800 to gtp7500 im talking about the sistem file named build.prop, i do this to allow my device to play all gameloft games compatible with the galaxy tab 10. In the past i washappy with it and all works good. Now with ics i have tray to change the same file, but when i reboot, the tablet won't start and i must refresh the firmware in order to restore my tablet. Someone can help me? Sameone know why this trick dont works? Thanks sorry for my bad english but i am italian
Click to expand...
Click to collapse
Pls help
Raziel_Sicily said:
hello, in the past i used to change the product code from gtp6800 to gtp7500 im talking about the sistem file named build.prop, i do this to allow my device to play all gameloft games compatible with the galaxy tab 10. In the past i washappy with it and all works good. Now with ics i have tray to change the same file, but when i reboot, the tablet won't start and i must refresh the firmware in order to restore my tablet. Someone can help me? Sameone know why this trick dont works? Thanks sorry for my bad english but i am italian
Click to expand...
Click to collapse
Up
try install busybox and try again.
Not to judge, but I have done the build.prop change in ICS and had busybox installed and I still had a tab that would not start
Could you explain how you get this working if you know how please?
Hi all
I want to install a mutli boot W8/android and I've already boot on "android-x86-4.2-20121225" (without install) with my W700 but the wifi is not recognized.
Tactil works fine
Can you help me to find a version of android who recognized the wifi card of W700 please...?
Ps: Really sorry for my English
Up
Somebody can help me please?
Sorry, this is forum for Iconia Tab A700/510/511, not W700.
I'm afraid you won't get any help here
Hi all
Is it to possible to switch my post in correct category please...?
I really need help!!
Thanks
UP
Thanatos057 said:
UP
Click to expand...
Click to collapse
You can up what you want, but you won't get any help here. This ain't W700's forum. I don't think xda has a forum for the W700.
Try your luck at this topic:
http://forum.xda-developers.com/showthread.php?t=1960196&page=3
This morning I compiled the version provided by Intel
Code:
https://01.org/android-ia/
The only thing that doesn't work is bluetooth. (disabled in the Makefile). Wifi is running fine.
I can provide you a boot.img or guide you compiling it if you want.
Hi, is there a way to install play store and google framework on this tab ? with iso's from https://01.org/android-ia ?
tatayoyo38 said:
Hi, is there a way to install play store and google framework on this tab ? with iso's from https://01.org/android-ia ?
Click to expand...
Click to collapse
yes,you can refer to this linkhttp://forum.xda-developers.com/showthread.php?t=1960196&page=3
Hi guys , im from turkey , im little speak english sorry
A method is a Philiz Touch ported by (serrano3gxx)[s4mini]
İm try to port cyanogenmod10.1 for my phone , im starting port on 22.10.15
İm so busy for school
İf you ask ? Please send email me.
[email protected]
Hi guys , im dedected 1 issue im ported rom , but flashing not succesfully . (Phliz Touch[Status1]) . I find a way to fix . Please give me i8200 (Meta.İnf~Google~Update-Script) file . Im return the work please send me folder via gmail
Nancy Stone
Dont know about meta-inf but you can move all files with aroma fm and then use clone rom to update.zip
Oh thanks Im starting port now
Nancy3i8ht said:
Oh thanks Im starting port now
Click to expand...
Click to collapse
have news about rom??
Yes , Rom is not stable . sorry im stoping a work , beacuse (serrano3gxx) not vurnerable with i8200 rom is flashing , but system says "unfortunately system ui has stopped" and "process.acore has stopped" . im searching new sources.
Sorry for my bad english
You mean its booting up ?
Yes , rom is worked but not useable
Can you upload an alpha-test so that other users may find out what is caused the issue
Okay , im recreate rom and upload file.
I wait
Hi guys , im not download file sorry My pc is changing they download file ..
Files :
GT-I8200 STOCK DEODEX DEODEX
S4 Mini (serrano3gxx)[phliz touch ported by serrano device ] and port rom yourself
Add desktop to 2 folder, "base"-"port" .
Exctact by zip. A file is (system.ext4.tar.a) delete "tar.a" change to "rar" . Exctract all sys files.
And delete : apps,framework,media,fonts,and etc(.com files)
Copy to port folder all files and paste base. And you create file to "Meta-Inf,google,*updater-script*"
Write codes script. And zip again file and install
-sorry for my bad english
Nancy Stone
And download serrano3gxx(cm10.1) file
@Nancy3i8ht
Just a question can you make the ported rom compatible for pdroid/openpdroid? I've been trying to find pdroid compatible roms for my phone for ages but I've been unsuccessful. Plz reply whether or not you think it's possible.:fingers-crossed:
Keep up the good work!
James
Im newible porting team , im searching new sources but probably openpdroid
Sorry for my english
-Nancy
Thanks in advance. I really appreciate your efforts.
:good:
Keep up the good work!
James
Thread Closed.
No.
ahahhahahaha