After installing dexter's 1.3 mod, i still do not see market....I know mod works because of sound volume change...I checked sd card on tablet and it shows update.zip.zip but on laptop card reads update.zip only...is that where the problem lies? I'm not sure where i should be finding the market app...or , is there something else I should do?
Here.
http://forum.xda-developers.com/showthread.php?p=11745552#post11745552
Edit: BTW, there was no volume change, the mod didn't install.
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
t_sandat8 said:
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
Click to expand...
Click to collapse
Not quite. If you do that on any of my workstations or laptops you will end up with a file
named just 'Update.'
It all depends on the settings you have in Windows File Manager.
If a user is going to be dealing with file extensions then the feature that is set to
'Hide File Extensions' needs to be disabled, Hence the link to the post on how to do that.
The instructions in the posting do not need clarification, File Manager needs tweaking
and that is how it needs to be configured to eliminate confusion.
It's rough that MS still realies on file extensions. And then when users are trying to do
something that requires that detail it gets confusing.
_mr
t_sandat8 said:
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
Click to expand...
Click to collapse
Are you serious? Get off the cheap drugs, the expensive ones won't $#% you up so bad.
I think you are actually the one that started me on that rant that I linked (that went into enough detail that it described, and gave instructions on how to fix people's common issues from TWO OPERATING SYSTEMS!) You keep telling people "just name it update" you are wrong, dead wrong. the file NEEDS to be update.zip and your generalization will only cause issues for people that wouldn't have had them otherwise... So it looks like you are the one that posts instructions that need clarification.
I posted the link because it had already been answered, I am not going to type until I am blue in the face just because some people don't have the gift of search.
middle_road said:
Not quite. If you do that on any of my workstations or laptops you will end up with a file
named just 'Update.'
It all depends on the settings you have in Windows File Manager.
If a user is going to be dealing with file extensions then the feature that is set to
'Hide File Extensions' needs to be disabled, Hence the link to the post on how to do that.
The instructions in the posting do not need clarification, File Manager needs tweaking
and that is how it needs to be configured to eliminate confusion.
It's rough that MS still realies on file extensions. And then when users are trying to do
something that requires that detail it gets confusing.
_mr
Click to expand...
Click to collapse
You just became my favorite xda member for today.
It's unfortunate that you had to type all that out just because this kid won't actually read the content of a link that, as it ends up, was in response to him anyway lol
I think we need concentrate on more important things instead dispute of update.zip
Anybody can call techsupport and ask about Gingerbread? Nvidia posted system image (for Tegra Development Boarder) with Android 2.3 already.
I can not cause i'm living in Russia) But i've sent them 100 kilos of emails)) No one was responded.
if your getting update.zip.zip rename to update
Help Please
I just received an A7 that I purchased for my wife. Want to add the marketplace and the ability to tether with an EVO. Have been reading and am worried that I may do more damage than good. If anyone has the time to help a beginner, I would be sincerely appreciative. Thanks and have a great day!
Frank
FrankandRachel said:
I just received an A7 that I purchased for my wife. Want to add the marketplace and the ability to tether with an EVO. Have been reading and am worried that I may do more damage than good. If anyone has the time to help a beginner, I would be sincerely appreciative. Thanks and have a great day!
Frank
Click to expand...
Click to collapse
1) Install elocitymod 1.3 on your A7 (install instructions are at the beginning of the thread for it in the A7 Development section)
2) Wait on the bluetooth fix to see if you have any problems (I am running without the BT fix and running fine, others have issues and the BT fix helps them out)
3) If you don't want to pay Sprint $30 extra a month you are going to have to root the EVO
3a) Use unrevoked3 (quick google search)
I would recommend doing it from a Mac just because it is easier, PC you have to install drivers.
3b) Once the EVO is rooted, install "Wireless Tether" from the Market (on the EVO)
4) Profit.
This is pretty much my setup and I love it. I have done other modifications to my A7 and my EVO, but nothing that would alter this.
Help Please
Thank you so much for your reply, sincerely appreciate it. Be patient with me, new to this stuff. I downloaded the mod and tried to install, with no luck. It downloaded five different files, which one should be renamed to update or update.zip? Downloaded pda.net on the evo and on the laptop and it worked fine. Just wasn't sure what to download for the A7 to make it work. Thanks again and have a great day.
Frank
FrankandRachel said:
Thank you so much for your reply, sincerely appreciate it. Be patient with me, new to this stuff. I downloaded the mod and tried to install, with no luck. It downloaded five different files, which one should be renamed to update or update.zip? Downloaded pda.net on the evo and on the laptop and it worked fine. Just wasn't sure what to download for the A7 to make it work. Thanks again and have a great day.
Frank
Click to expand...
Click to collapse
the file ElocityModv13.zip should be update.zip
Make sure Hide extensions for known file types is OFF in Windows.
I'm starting to suspect that the micro card reader in the A7 might just be finicky.
What size and type of Micro SDCard are you using?
Do me a favor and do a 'Properties' on the Dexter Mod file and post back what size is reported.
Try formatting the card this way: -=- LINK -=-
_mr
mod on SD Card
I think the ELocity only supports the micro SHDC cards not vanilla micro SD cards. Someone else in another thread had a problem with update.zip and it turned out it was on a vanilla micro SD card and when they used a micro SDHC card it worked.
Related
Hi I am a newbie I did everything the instructions told me to do but when I put the sd card in my a7 it said bad can't open file what did I do wrong I wiped the a7 I clean the cache I cant figure out what I did wrong I even formatted my micro sd card please help me
SD card had to be formatted as Fat32 not NTFS...
Regards
how do i format it like that
opening update package
i tired it again and it says can't open/sdcard/update.zip(bad)
Geekylj said:
i tired it again and it says can't open/sdcard/update.zip(bad)
Click to expand...
Click to collapse
Update. with a cap U name of file. It will not work.
Geekylj said:
i tired it again and it says can't open/sdcard/update.zip(bad)
Click to expand...
Click to collapse
Also, downloads for Dexter's mods have historically been buggy for many users. The file you download (through 1.3) should be around 100MB. The exact size varies between versions. If the above suggestions don't work for you, try downloading the file again.
If you still have issues with the downloaded file, other users have found download success by using a browser download plugin called flashgot. It only works with Firefox and Thunderbird though.
http://flashgot.net/
I had an issue with the download with similar results to yours. My download was only about 63K whem it should of been a little over 100MB.
I had to start down loading the 1.2 update, that would start to download the whole 1.2 file. I'd cancel the download then download 1.3. For some reason after that it downloaded the complete 1.3 update file and I was able do the update.
So, check your downloaded file size and see if that's you issue. Also make sure you rename it Update with a capitol "U".
how long does the download take? i followed the instructions and my screen went to a picture of an android? and a box and stayed that way.
mattduck said:
how long does the download take? i followed the instructions and my screen went to a picture of an android? and a box and stayed that way.
Click to expand...
Click to collapse
Did you boot into recovery (1. by turning off the unit, then power it on by holding the power button for a second, release, and then hold again until the recovery menu pops up), or did you use the settings menu to run the Update file (2. Open Settings > About device > System updates > Update device)?
If you did option 1, the soft keys on the side of the tablet allow you to navigate from the image you reference (android robot & box):
Search Key = Up
Back Key = Down
Home Key = Menu
Menu Key = Select
When you see the robot, press the Home key to take you to the update menu. Navigate the menu to clear your cache. After the cache wipe is complete, select the option to install Update.zip. Give it about 10min to run through the update, and it should reboot. If it reboots into an Elocity Logo loop, long press the power key until it shuts down. Your next boot should take you into a properly functioning tablet. Depending on the version of the OS you currently have installed, the update may retain your current apps and settings.
I haven't tried option 2 in a while, but it should do everything for you automatically - but it will probably factory reset the tablet and you'll lose any previously installed apps.
thanks. Did not know this when i posted found out byaccident when wipinfg off fingerprints. Wish they sent directions with the A7.
mattduck said:
thanks. Did not know this when i posted found out byaccident when wipinfg off fingerprints. Wish they sent directions with the A7.
Click to expand...
Click to collapse
NP. Did exactly the same thing back in December.
if you have not solved your issue I believe I had simular problem. the file when you download is already a .zip file. So when you rename it just rename it "Update"
Another newbie here with a question.
My new A7 is due to be delivered tomorrow.
From what I have gathered so far from this board is that the Dexter Mod allows you to get apps from google marketplace, correct?
I am not sure which version of firmware will come on the A7 but I am going to assume that it will not be the latest one released in February.
My question is should I do the firmware update first, and then download and install the Dexter Mod?
Thanks in advance.
rharrad said:
Another newbie here with a question.
My new A7 is due to be delivered tomorrow.
From what I have gathered so far from this board is that the Dexter Mod allows you to get apps from google marketplace, correct?
I am not sure which version of firmware will come on the A7 but I am going to assume that it will not be the latest one released in February.
My question is should I do the firmware update first, and then download and install the Dexter Mod?
Thanks in advance.
Click to expand...
Click to collapse
Dexter's mods have all been based on firmware updates from Elocity. He has kindly added market functionality and fixed a few bugs. I don't see any value in updating with Elocity's firmware prior to installing Dexter's latest.
As the other poster said there is no need for the elocity 7 update but if I were youI would keep it handy. I had a problem with the mod and had to reset the device with the old firmware. Also it seems a weird problem with android reading the file as when reading in astro the upddate.zip looked like update.zip.zip. w
Wierd.
So you just write update i dont even capitalize it.
Also want to add as newbie to andrid as well and it makes a huge difference in performance too. Think it is fast now when you put the mod it seemed to increase overall performance for me which I did not expect.
Good luck
Rob
robbbzilla said:
As the other poster said there is no need for the elocity 7 update but if I were youI would keep it handy. I had a problem with the mod and had to reset the device with the old firmware. Also it seems a weird problem with android reading the file as when reading in astro the upddate.zip looked like update.zip.zip. w
Wierd.
So you just write update i dont even capitalize it.
Also want to add as newbie to andrid as well and it makes a huge difference in performance too. Think it is fast now when you put the mod it seemed to increase overall performance for me which I did not expect.
Good luck
Rob
Click to expand...
Click to collapse
That is not an android problem. That is what happens when windows explorer is set to hide known file extensions and people dont think when remaming things.
Please do not insult people because we lack knowledge which is why we are here to figure out what is going on. I had no idea windows explorer was set to hide file extensions. I never set it that way nor was i ever told before now. Now that I know i can do something but I was thinking, maybe i do not know what i am doing but you could offer help without making me feel like an idiot.
Rob
robbbzilla said:
Please do not insult people because we lack knowledge which is why we are here to figure out what is going on. I had no idea windows explorer was set to hide file extensions. I never set it that way nor was i ever told before now. Now that I know i can do something but I was thinking, maybe i do not know what i am doing but you could offer help without making me feel like an idiot.
Rob
Click to expand...
Click to collapse
So it is not OK for me to point out an obvious mistake (seriously, this one is like calling grass purple). BUT it is perfectly fine for you to assume that it is a "problem with android" and disseminate misinformation like its your job.
Yup, I am obviously in the wrong.
It is obvious to you. I made a mistake and never said I was an expert and pointed that out in my response by saying I was a newbie too and this was what happened to me and my best guess was what I said. I never said I knew it was an andriod glitch but because I had no other idea until someone like you with more knowledge chimmed in.
All I am saying is you could have corrected me as a newbie with a sense of friendship and not superiority. I was sharing my experience to help someone else. That is all I want to do. I am no expert and am learning as I go.
I have seen others in linux forums when i started with that with the tone. Maybe it seems like thecolor of grass to you but is not so obvious to others. If I sounded like I was telling people mis information then I apologize. That was not my intention.
It is up to you how you treat others and if it feels like the right thing then that is your right. Just understand that some of us are not out to show we are smarter than anyone else and are just trying to help even when we make wrong assumptions.
Thanks for correcting me and setting the record straight.
Rob
rename teh update - update- DONOT PUT THE ZIP PART.
i had the same problem. i noticed the elocity update did not use the zip in the update name.
Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!
Newbie here - used search feature, searched across forums. Did not find my problem addressed.
Putting CM7 on wife's NC 1.2.0. Followed huskermania's steps exactly. Everything installed fine until I got to the part where I selected format data. Then I received message, "error formatting data!" Everything stops right there and I have to power the unit down.
Re-downloaded the file twice - went through the complete process two times across several different times so as to avoid frustration causing more trouble! Using a Sandisk 8g class 4 card.
Using 7zip, cm7.0.3, and win32diskimager, and google add-ons, downloaded as directed by the husker dude.
In one section of his video, Huskermania moves files to the mSD - his files are shown as yellow folders. Mine show up as a small stack of books. When I look at the properties of my files, they are winrar zip archive files.
Please help! I'm so close!!
Thank you,
Jim
I believe your issue has been addressed more than one, maybe not exactly the same but pretty close.
Anyway, your NC is v1.2.0, often called "blue dot" which B&N decided to change the partition mapping, used to be 1GB /data & 5GB /media in v1.1, now be 5GB /data & 1GB /media in v1.2.0.
If you don't have a bootable uSD card with CwM Recovery 3.2.x.x or above, it will give you that error "cannot format /data". However, in my specific case, I did have the issue but my NC actually continued to next step, not hung and no need to force reboot.
I suggest you get the newer CwM (v 3.2.0.1) and give it a try again.
Votinh,
Thank you for your reply. As I learn, I am finding that sometimes I don't understand what to ask to find the solution!
I will try this today and report back.
Thank you again,
Jim
Wait!
I checked the version of the file I had used to install cwr and it is 3.2.0.1 - the same file that I was encouraged to try. To be more precise, it is "recovery-clockwork-3.2.0.1-bravo.
So, I'm still stuck.
HELP!
Thank you,
Jim
Can't offer anymore help, m8 but I don't think you should be panic.
If I were you, I would try to re-partition/re-format to 1GB /data 5GB /media, then using CwMR v3.0.2.8 and try again.
Great! Now, can you tell me how to do that?
Thank you,
Jim
I would suggest reading This first. Important info if you are going to muck around in the internal memory partitions.
Then I would go Here and see if this will help.
If not, This, This, or This might be your next best steps as far as reading and/or trying.
Also, This Sticky could shortcut you to the solution you need.
All these links go to XDA threads here in the Nook Color forums. They aren't all the recovery threads, but most of the more recent ones that could help you.
I haven't had to deal with what you're trying to handle, but this should be a great start/solution to solving your problem.
It's gonna take some reading and absorbing to comprehend what you're trying to accomplish, given the level familiarity you seem to have with your device and it's internal file structure.
(I mean no slight by this, the fact that you are here trying to learn and figure out your issue says much - welcome to the community btw )
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Jim1970 said:
I'm finally up and running cm7!
Click to expand...
Click to collapse
This put a smile on my face, i'm glad to hear you got your issue resolved.
Nothing worse then having a wonderful piece of technology right in your hands that you can't use.
I have no doubt you are going to have a blast with it.
Cruise through the 'themes and apps' subforum here in Nook Color Forums, and you'll find some gems that are out there in the market.
I am not sure about the answers to either of your questions, but I do know that:
Some people have had to do some funky things to block B&N updates, and there have been conflicting answers on this. Again, only have seen in passing - so not sure what the whole story is here.
B&N doesn't push updates that often, so it's likely you have some time to figure this out.
I see people mentioning overclocking to 1200 a lot, so 950 shouldn't put too much stress on your machine. Depending on what version of CM7 you are running, you shouldn't use an external app to overclock. I've been using mine at the standard 800 and can play games like Samurai 2 (with chainfire installed) and it's no problem for the machine.
If your CM7 version provides you overclock settings, use those and not an outside app like SetCPU.
Some random info gleaned from browsing through this forum. Not too specific in addressing your query, yet maybe helpful in your continuing Android education.
Jim1970 said:
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Click to expand...
Click to collapse
I help many people in many threads and tend not to remember the OP's original issue, so I have to re-read again
Firstly, congrats to you, do enjoy the NC running CM7. I bet by now, you are not a noob or newbie anymore, experience learnt.
Secondly,
1. since the NC is running CM7 ROM now, you don't have to worry about anything from B&N, even their new release probably won't be as good as the CM7.
2. by default, CM7 comes with kernel that can be overclocked to 925MHz (at least true on the v123 nightly build, not sure the latest) and again, it runs at 800MHz by default. You can set it under ??? (not on top of my head now and I don't have the NC in front of me, will update later).
If you want to run faster than 925MHz, you must install Dalingrin latest work - build on 06302011. Be sure download the "emmc" version since you run the CM7 off the internal memory.
Hello All,
This may seem a bit dumb but I've only been in the Android and Iconia A500 world for 6 days. I've spent some 20 years in the Windows environment but cannot figure out my current problem. I've searched on Posts, looked in the A500 User Manual and searched on the Acer support webpages.
My basic problem is: How do I install downloaded application software (not from Google Market or Play) onto my A500?
In particular, I have downloaded the Acer Sync software :
"Application_Acer_1.06.3006_A30HA31HA32H_A.zip"
I have this file downloaded into my Tablet download folder but I do not know how to launch it. I'm very familiar with the Windows environment but am lost in the Android world. Would very much appreciate any assistance.
Regards,
Richard.
argekay said:
Hello All,
This may seem a bit dumb but I've only been in the Android and Iconia A500 world for 6 days. I've spent some 20 years in the Windows environment but cannot figure out my current problem. I've searched on Posts, looked in the A500 User Manual and searched on the Acer support webpages.
My basic problem is: How do I install downloaded application software (not from Google Market or Play) onto my A500?
In particular, I have downloaded the Acer Sync software :
"Application_Acer_1.06.3006_A30HA31HA32H_A.zip"
I have this file downloaded into my Tablet download folder but I do not know how to launch it. I'm very familiar with the Windows environment but am lost in the Android world. Would very much appreciate any assistance.
Regards,
Richard.
Click to expand...
Click to collapse
Acer Synch is meant to be installed to your PC I believe, or, it could be what comes with a stock tablet (I usually remove all this garbage). I supposed if you look inside the zip file, you will probably see an executable file ".exe". If you see an acersynch.apk, then you would copy it to your tab's internal memory and try installing it from there. But, it depends on the app. Some apps are meant to be run from the /system/app folder.
Or, the zip file could be a flashable zip file meant to be installed through CWM Recovery, which I really don't think you have considering you are new.
So take a look inside the zip file, and tell what you see.
Most apps for the tablet come in the form of "nameoftheapp.apk".
If you wish to "sideload" an apk or install it manually, you will have to turn on the setting in your tablet settings to "allow non market apps".
But again, the file must be an apk, and not a zip.
MD
Many thanks
Many thanks for your speedy and informative reply Moscow Desire. The .zip file containes a .exe file - clearly not intended for residence on my new nifty A500.
Best regards,
Richard
argekay said:
Many thanks for your speedy and informative reply Moscow Desire. The .zip file containes a .exe file - clearly not intended for residence on my new nifty A500.
Best regards,
Richard
Click to expand...
Click to collapse
No problem Mate. Always wise to take a look inside any .zip and see what's in there. I always do, even if it comes from somebody I do testing with. Always wise to see what's going in there.
As with what we call "flashable zips". Just to fill you in. These are zip files that are flashed (installed) through a custom recovery. Normally, a stock tablet never deals with this, as it doesn't have the capability (except in 1 circumstance).
Generally, a lot of folks "root" the tab, do some more modifications like the unlocked bootloader, and CWM recovery. This allows flashing of custom Roms, kernels, apps, custom roms, and several other little goodies that the stock system won't allows us to do.
Of course, according to Acer, it breaks the warranty, but usually can be reversed. Except when a tab is totally FUBAR'd.
Of course if you wish to come over to the "Dark Side", we'll be more than happy to help.
Peace On!
MD
One thing that is also interesting to note is that some zip files maybe renamed to .apk then they can be installed as well
Sent from my A500 using Tapatalk 2
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
F
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
Did a Google search for "sugar qct" and I see a couple of million hits for "The Sugar Act"... :laugh:
Tried Root Genius, and it, of course doesn't work...
If you happen to find a link for the app or method you stated, I would be eternally grateful... My lovely wife and I upgraded our phones to the Cricket 6055U, and, since, while not an Android developer, per se, can find my way around the device without being scared off...
So, with due respect, I'd ask if you have the app or name correct?
Thanks, friend, and best respect.
--- edit ---
Oops... was premature... found it and am giving it a try... I'll post my results after I give it a shot...
http://forum.gsmhosting.com/vbb/f606/vf-895n-smart-prime-6-stock-rom-flash-tool-2033867/
This should help with setting up sugar. The only difference here is to update it and you also need a username and password that I don't have on me at the moment. It will be a few hours until I get home but I will update asap.
Edit: nevermind lol, good luck friend. You may need a decent battery percentage as well
pauljulian said:
F
Did a Google search for "sugar qct" and I see a couple of million hits for "The Sugar Act"... :laugh:
Tried Root Genius, and it, of course doesn't work...
If you happen to find a link for the app or method you stated, I would be eternally grateful... My lovely wife and I upgraded our phones to the Cricket 6055U, and, since, while not an Android developer, per se, can find my way around the device without being scared off...
So, with due respect, I'd ask if you have the app or name correct?
Thanks, friend, and best respect.
--- edit ---
Oops... was premature... found it and am giving it a try... I'll post my results after I give it a shot...
Click to expand...
Click to collapse
----- edit 2 -----
OK... apparently I'm an idiot... Running Windows 10 Pro, and the installer says it's going to install to an appropriate folder on C:\... yet, trying to find it, it really is weird.... I'm going to try on a VMWare Win 7 virtual PC, and see if I'm able to find it there, and move it to my actual C: drive...
If it works, I'll be grateful for your contribution and praise you to the highest heaven! :laugh:
pauljulian said:
----- edit 2 -----
OK... apparently I'm an idiot... Running Windows 10 Pro, and the installer says it's going to install to an appropriate folder on C:\... yet, trying to find it, it really is weird.... I'm going to try on a VMWare Win 7 virtual PC, and see if I'm able to find it there, and move it to my actual C: drive...
If it works, I'll be grateful for your contribution and praise you to the highest heaven! :laugh:
Click to expand...
Click to collapse
Can't seem to get the beast to work...
If you would be so kind, would there be any way you'd be able to write up a concise step-by-step thing, if you've made it work... I've got the .chm file open on my desktop, and have spent a few hours trying to make it work to no avail.
Again, if it worked for you, your process would be welcome.
Cricket Alcatel Idol 4, 6055U
---------- Post added at 03:36 PM ---------- Previous post was at 02:40 PM ----------
pauljulian said:
Can't seem to get the beast to work...
If you would be so kind, would there be any way you'd be able to write up a concise step-by-step thing, if you've made it work... I've got the .chm file open on my desktop, and have spent a few hours trying to make it work to no avail.
Again, if it worked for you, your process would be welcome.
Cricket Alcatel Idol 4, 6055U
Click to expand...
Click to collapse
My point is that the site recommended seems to insist on Lollipop on the small beast... and there doesn't seem to be a recommendation for the .bin files, and, when installing on Win 10, it seems to install the Sugar app into some directory on my C: drive that is really not that accessible... Did it using a VMWare Win 7 32-bit virtual, and was able to access the directory, copy and paste to my regular C: drive (old Windows geek since Win 3.11... and DOS 3), and it seemed to run... (of course, running as Administrator), but it really doesn't seem to work for me... Again, I freely admit that I'm likely not doing something right, but even after some research and the included .chm file, I seem to be missing something.
Again, and begging your indulgence for seeming like a noob or a rube, but if I'm not making it happen, I rather think that the tips would be lost on someone for whom this is their first Android device...
Kinda frustrating, as, even though I've been a tech-support guy and database developer for more than 30 years, this thing has me stymied...
I found it fascinating for the *#*# command, earlier, from another noble soul, and, obviously, I also found that the device as configured says, basically... "Don't give a damn... you can turn this sucker on, but as soon as you exit this menu, I'm gonna turn it off again."
Just a little frustrating, and it seems that most of the tips and tricks elsewhere seem to be thinking that new owners of the 6055U are running Lollipop.... aaarrrgggghhh....
If it needs Lollipop to work, and if there's a relatively painless way to downgrade, and then upgrade from a ROM, I'm good with that... the Idol 3 seemed to require that, and it worked well for me, with just an evening's work. This one? Cricket seems to have had a warped sense of humor about it... I seriously dig the device, and, since my Idol 3 broke, and my lovely wife's LG G-Stylo (which was a pain in the ass, and next-to-impossible to root, and then be just perpetually stuck at the logo screen with an unfixable boot loop, if one screwed it up, and just required sending the beast back to LG, as long as one took out Cricket's warranty plan... <sigh>), we took the plunge on this one...
Not much for which I require root, but, since I spent good money on some legit apps (and lucked into a few ... ahem... not legit apps that worked for me), these things require root... I know there's a way to do it, and the Sugar app seems promising, but, mildly autistic guy that I am (and 60 years old, with a memory that doesn't work as it used to), a slimmed-down step-by-step doc would be helpful... should some noble soul put such together...
Apparently, the root method has worked for at least one member here.... But this weird old Jewish hippie doesn't see the mental diagram....
Any help would be welcome, my friends and mishpocheh... ("dear family" --- been here enough years, albeit a relatively quiet member, that y'all might as well be family... )
Hey everyone, sorry about the confusion. I installed on Windows 10 pro with no issues. As far as the page I linked you can disregard everything but the app itself. The update that downloads is marshmallow, and I've had no issues overwriting the latest version. I may have gotten sugar from a different location though, as soon as I get a chance I will do a better write up with everything. A helpful way to find the install directory would be right click on the shortcut from the start menu and click find Target / open file location. If it brings you to the folder with the shortcuts do it again and you will have the install directory. The app should be in (install dir)/tool and the downloaded updates go in (install dir)/bin under a folder that only shows up once you start the process within sugar. I will try to compile the information into a more user friendly format tonight but I can't make any promises on that.
Also just to clarify, I didn't use any chm file
I'm wondering if you could upload your version you have on your pc. I just spent the last month in jail here in Orlando fighting a case and the only proof I've got is on my phone on a phone that I deleted my videos on. I really need the videos back too get a not guilty if I gotta pay for it it's cool but I'm out on bond and all the recover videos apps require root
I got this to work last night. Typed up some instructions but didn't get them posted. They're on my PC at home and I'm at work.
Basically use the copy of sugar in the download package in this thread and then start it and let it update https://forum.xda-developers.com/android/development/recovery-vodafone-prime-tab-7-t3548560
Those are the basic instructions too except we don't need to swap out bout and use the TWRP from deckersu thread.
Once flashed it'll automatically reboot. I found you had to make sure you caught this and booted into TWRP right away don't let the phone boot. Then transfer SuperSU in TWRP and flash.
---------- Post added at 11:29 AM ---------- Previous post was at 11:23 AM ----------
Asadullah said:
I'm wondering if you could upload your version you have on your pc. I just spent the last month in jail here in Orlando fighting a case and the only proof I've got is on my phone on a phone that I deleted my videos on. I really need the videos back too get a not guilty if I gotta pay for it it's cool but I'm out on bond an ind all the recover videos apps require root
Click to expand...
Click to collapse
FYI this root method wipes your phone so I don't know if this will help your situation or not.
In sugar there is an option to not wipe, it's under session settings or something to that effect
dbgr said:
In sugar there is an option to not wipe, it's under session settings or something to that effect
Click to expand...
Click to collapse
Wish I had noticed that!! Oh well, stoked to have root and it's good to start fresh. Got Xposed installed today and finally got that annoying charging light turned off. Working on getting wifi tetherng working. Then if I can figure out how to get the dialer to be friends with Google voice this phone will have all its annoyance fixed
Thanks so much for figuring this out and sharing!!
dbgr said:
In sugar there is an option to not wipe, it's under session settings or something to that effect
Click to expand...
Click to collapse
Appreciate the help
woodi5359 said:
https://forum.xda-developers.com/android/development/recovery-vodafone-prime-tab-7-t3548560.
Click to expand...
Click to collapse
Thank you for finding this thread, it is the same one I found but I couldn't remember where it was the other day when I started this thread. Hopefully this will help the people who have been having issues, although I will admit a more painless method would be preferable. I'm currently working on modifying a dirtycow exploit to simply flash the recovery and reboot into twrp, if I get it to work I will zip it all up and post it here.
woodi5359 said:
Wish I had noticed that!! Oh well, stoked to have root and it's good to start fresh. Got Xposed installed today and finally got that annoying charging light turned off. Working on getting wifi tetherng working. Then if I can figure out how to get the dialer to be friends with Google voice this phone will have all its annoyance fixed
Thanks so much for figuring this out and sharing!!
Click to expand...
Click to collapse
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Asadullah said:
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Click to expand...
Click to collapse
I just tested this and it indeed does work. Great find friend!
Asadullah said:
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Click to expand...
Click to collapse
Thanks for figuring this out!!! I'd been messing with it for a few days. The renaming the apk to .oat was the piece I was missing. That and a reboot got it working!!
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
so im getting ready to purchase this device so there is root and twrp for it or no
Dude, did you read the thread at all? I don't mind helping but you gotta do your part. Yes there is TWRP and Root
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
do you hold volume down when it reboots
link22534 said:
do you hold volume down when it reboots
Click to expand...
Click to collapse
It's volume up and power