Hallo,
can we do that? to finally get a working Phone Canvas on Leo HD2 with Builds 231xx.
Or point me how to do it and i will take the Time and effort to do it.
As i can see only the Phcanhtc.dll and Phcanrc.dll musst be ported all the others r avaialable in WVGA. (plz correct me if i am wrong)
WBR
Siemens Lover
Attached is the Phone Canvas von Photon (HVGA) ROM 1.38 O2
Still hoping of some one to do that or point me how to do that...
WBR
Siemens Lover
it's not as easy as you maybe think it is.
phonecanvas of hdmini is also dependent on new ime engine and ezinput.
new com3 packages of this are only available in hvga (hdmini) or in wvga (only asian).
the main problem is the differences of the available com3 dialers compared to leo's native dialer.
some have videocall (leo does not support this) and some have missing conference mode for example.
common for most com3 dialers on leo is caller id issue and freezes on incoming calls (from a caller that's in contacts).
currently the best solution is used by most leo-chefs (native leo dialer with fixes for com3).
Phone Canvas of HDmini is not dependent of new ime and ezinput, also if it is dependent of them that will not be the problem.
The most important is to edit phcanhtc.dll to work in WVGA.
WBR
Siemens Lover
SiemensLover said:
Phone Canvas of HDmini is not dependent of new ime and ezinput, also if it is dependent of them that will not be the problem.
The most important is to edit phcanhtc.dll to work in WVGA.
WBR
Siemens Lover
Click to expand...
Click to collapse
I'm sure it's possible to make a perfect port, but it's not going to be easy. Back when people were trying to port wvga to vga, they could never get the incoming call (and I think in-call) to position correctly. amarullz actually created a program to move the entire wvga screen up so that you could slide to answer, etc. This was the best (and only) solution to fully port a wvga phone canvas to vga. I'd think it would be harder to do smaller to bigger, because there is no 'easy' solution like moving the entire incoming call screen up. You can read a lot of stuff in this old thread. It's convoluted, but there are many parts that talk about porting rhodium wvga to vga. The tachi part also had to disable a dual-band phone canvas if I remember correctly, so that may be helpful as well for getting Oboe to work.
if we can disable the Dual SIM in the Oboe Phone Canvas then wee will have a working Phone Canvas for the Leo!
WBR
Siemens Lover
We have in Leo HD2 a Problem with Phone Canvas under Build 231xx or similar.
The Old Phone Canvas 4.2 (2G) has the Caller ID issue.
The new Phone Canvas 5.0 (3G) from Huashan works OK, no caller ID issue but phone Freezes when answering an incoming call because of the ACTIVE Video Call option.
The new Phone Canvas 5.1 (3G, but the Video Call Option is DEACTIVATED) from Oboe works OK, no caller ID issue, no freezing but no out going calls because of the Dual SIM system of the Oboe Phone.
The new Phone Canvas 5.0 (2G) from Photon works OK, no caller ID issue, no freezing but HVGA (leo is WVGA).
To be edited is the Phcanhtc.dll
One of the Following will solve the Problem:
- Editing the new Phone Canvas 5.0 (3G) from Huashan to DEACTIVATE the video call option.
- Porting the new Phone Canvas 5.0 (2G) from Photon (HDmini) to work in WVGA
That is beyond my knowledge.. plz help editing or point me how to do that.
Attached all the 4 Packages
http://forum.xda-developers.com/showthread.php?t=988133
Thanx in Advance
WBR
Siemens Lover
Has anyone tried this?
smaberg said:
EXT PACKAGES
08/03 -10 PHOTON_Phone_Canvas_Enhancement_2G_WVGA 5_0_62120121331_0.rar
Click to expand...
Click to collapse
It is post #4 on this: http://forum.xda-developers.com/showthread.php?t=637671
Thanks, I didn't. Going to have a look at it.
rtomakov said:
Has anyone tried this?
It is post #4 on this: http://forum.xda-developers.com/showthread.php?t=637671
Click to expand...
Click to collapse
Hello,
I have tested the ported photon phone canvas. I guess dlls and images are used from leo phone canvas to port.
1. Has caller id issue on com 3 build.
2. Has incoming screen position issue.
3. Dialpad hide icon not aligned correctly issue.
4. No landscape support.
So I guess oboe phone canvas hybrid with leo phcan is better to use instead. Of course with phoneredist from com 5.
CRACING said:
Hello,
I have tested the ported photon phone canvas. I guess dlls and images are used from leo phone canvas to port.
Click to expand...
Click to collapse
I do not think that the dll files r from Leo.
I think this is an old Photon (HDmini) Phone Canvas from an old ROM with Build 236xx (or some thing like that) with the old cprog.exe, that is why we get the Caller ID issue with the new Builds!
I send a PN to the poster (3 days ago) asking him if he did the porting and if he can help..... but no answer yet!
I do not think that it is difficult to port the new Photon Phone Canvas because we have many WVGA Templates, i just need to know what to do and where i start... but no 1 want/can tell me that! :-(
WBR
Siemens Lover
SiemensLover said:
I do not think that the dll files r from Leo.
I think this is an old Photon (HDmini) Phone Canvas from an old ROM with Build 236xx (or some thing like that) with the old cprog.exe, that is why we get the Caller ID issue with the new Builds!
I send a PN to the poster (3 days ago) asking him if he did the porting and if he can help..... but no answer yet!
I do not think that it is difficult to port the new Photon Phone Canvas because we have many WVGA Templates, i just need to know what to do and where i start... but no 1 want/can tell me that! :-(
WBR
Siemens Lover
Click to expand...
Click to collapse
Afaik, HDmini started with com 3 itself or the build which has startmenu on bottom.
so if he has really ported photon dlls, then it shouldn't have the position and dialpad icon issue.
BTW; see this post. He has written about one of LEO ROM has 5_0_62120121331_0 phone canvas.
HTC never creates different DPI apps with same build no!
I guess the porting guy wrote photon simple.
@ CRACING
let us say it is a ported HDmini Phone Canvas, can u use it as template to port the new Phone Canvas attached in the first post?!
or can u guid me how to do it (which tools...) because i think u have some programing skills, don't u?
WBR
Siemens Lover
and some thing more..
just a thought and like to share it with u...
The Huashan 0.90 phone canvas:
Phone_Canvas_Enhancement_2G_5_0_61220163232_0
is a 2G phone Canvas, but it needs the Videotelephony Package to work!
May be we can get it to work on our HD2? it is already WVGA.. we just need to find out how to make it works without the Video Telephony package.. or use it as template for porting of the Photon (HDmini) Dialer..
What do u think?
WBR
Siemens Lover
For the Package see:
http://forum.xda-developers.com/showpost.php?p=7342838&postcount=27
@Siemenslover,
Thank you for the info, I'm going to play with it.
The link you provide is dead btw but I will dump the phonecanvas from Oboe 0.90.
Grtz,
@ Laurentius,
link is now OK..
WBR
Siemens Lover
Hallo again,
dear friends i am using now HEX Workshop program and i compared different phcanhtc.dll files.
To port the PHOTON phone canvas some strings must be changed... do u know what do i have to change?!
See my post here:
http://forum.xda-developers.com/showthread.php?p=12375192#post12375192
WBR
Siemens Lover
SiemensLover said:
@ CRACING
let us say it is a ported HDmini Phone Canvas, can u use it as template to port the new Phone Canvas attached in the first post?!
or can u guid me how to do it (which tools...) because i think u have some programing skills, don't u?
WBR
Siemens Lover
Click to expand...
Click to collapse
May be but its no use. We already have leo phonecan working on wm6.5.3 (Though it needs phoneredist from com 5) and also hybrid oboe phone canvas.
This ported photon has nothing special. Neither it has landscape support nor it has caller id fixed on com 2 builds.
I'm not so expect in programming but I can understand how they work and lil about hacking.
SiemensLover said:
Hallo again,
dear friends i am using now HEX Workshop program and i compared different phcanhtc.dll files.
To port the PHOTON phone canvas some strings must be changed... do u know what do i have to change?!
See my post here:
http://forum.xda-developers.com/showthread.php?p=12375192#post12375192
WBR
Siemens Lover
Click to expand...
Click to collapse
phcanhtc.dll is neither a XML or De-compilable script nor source. Its a pre built file which cannot be decompiled.
Using IDA and hex tools we can edit some of numbers (i.e position of top bar aka incoming position fix) but its impossible to convert it from 2G to 3G nor HVGA to WVGA.
If it could, experts here in xda did already.
BTW; as of 2G phone canvas from husa, I don't think its really 2G! Because if I remember well, I tried it few days back and saw the video calling switch. But I'm not sure.
Thanks...
Best Regards
@ CRACING
i know that the porting is possible but i am not familiar with IDA and DLL patching... and i could not find some one that tell me what to be changed.
I will take all the time and effort to make the port but i do not know where to start.... :-(
WBR
Siemens Lover
SiemensLover said:
@ CRACING
i know that the porting is possible but i am not familiar with IDA and DLL patching... and i could not find some one that tell me what to be changed.
I will take all the time and effort to make the port but i do not know where to start.... :-(
WBR
Siemens Lover
Click to expand...
Click to collapse
We are trying hard to port it. Any of phone canvas but couldn't. I think there aren't anybody who have tried to port. If they do, we would already have it.
We don't know what to be modified, also the exports around here. So how can we tell anything!
L26 is trying to make LEO Phcan working with untouched SYS dlls.
I'm trying to remove video calling and conference on rhod phcan 3G.
But we have no success yet.
Lets see what happens...
Related
Hi Guys,
I cooked a WM6.5.5 ROM build 23541 based on RUU_Rhodium_S2_HTC_Europe_2.07.401.1
Most of things currently works perfectly, with the exception to the incoming call screen position. This is a small gap from the top which looks not very good.
I tried to apply fixes ex. here: http://forum.xda-developers.com/showthread.php?p=5910397#post5910397
This solved for me the scroll bar and the softpad overlap issues but the incoming call screen is still wrongly positioned.
Could anybody help me in solving this issue?
Thank you in advance and best regards!
Lissek said:
Hi Guys,
I cooked a WM6.5.5 ROM build 23541 based on RUU_Rhodium_S2_HTC_Europe_2.07.401.1
Most of things currently works perfectly, with the exception to the incoming call screen position. This is a small gap from the top which looks not very good.
I tried to apply fixes ex. here: http://forum.xda-developers.com/showthread.php?p=5910397#post5910397
This solved for me the scroll bar and the softpad overlap issues but the incoming call screen is still wrongly positioned.
Could anybody help me in solving this issue?
Thank you in advance and best regards!
Click to expand...
Click to collapse
You should replace
cprog.exe
pimstore.dll
tpcutil.dll
from 235xx builds.
Pre-tested on 28232, 23106, 21636
At 23106 and 21636 should be replaced and lockscreen.dll
b16b said:
You should replace
cprog.exe
pimstore.dll
tpcutil.dll
from 235xx builds.
Pre-tested on 28232, 23106, 21636
At 23106 and 21636 should be replaced and lockscreen.dll
Click to expand...
Click to collapse
he said he was cooking 23541, why should he replace those dll files to fix position of incoming call screen? i assume the "fix" you are telling him to do is for the caller id problem with 231xx, 216xx, ect. but that isnt what he was asking.
as for helping you Lissek, sorry but i dont know a solution and as far as i know nobody has figured it out yet. you can try opening phcanrc.dll and some of the other dlls in the phone canvas pkg with a resource editor like restorator, this is how the scrollbar on dialpad was fixed...maybe there is something that can be done im just not sure.
twopumpchump said:
he said he was cooking 23541, why should he replace those dll files to fix position of incoming call screen? i assume the "fix" you are telling him to do is for the caller id problem with 231xx, 216xx, ect. but that isnt what he was asking.
as for helping you Lissek, sorry but i dont know a solution and as far as i know nobody has figured it out yet. you can try opening phcanrc.dll and some of the other dlls in the phone canvas pkg with a resource editor like restorator, this is how the scrollbar on dialpad was fixed...maybe there is something that can be done im just not sure.
Click to expand...
Click to collapse
yes you are right
i just read it fast..
do you have fix for 6.5.x and landscape incoming call?
First of all thank you guys for your help!
twopumpchump, I flashed your ROM and I see that you don't have a problem with incoming call screen position in your ROM. This is positioned perfectly well.
Mine is positioned a little bit too low and I simply see the fragment of the screen with the operator name in that gap.
I have that problem only on incoming call screen, dialer is positioned ok.
I tried to compare dialogs from phcanrc.dll you use with the one with my ROM and I see no difference.
Have you ever observed that in your ROMs?
Might it be related to the kitchen I use? I don't think so, but.. when I use osKitchen my ROM boots ok, but when I use EVK my ROM hangs on the first use screen once the progress bar reaches the end.
Lissek said:
First of all thank you guys for your help!
twopumpchump, I flashed your ROM and I see that you don't have a problem with incoming call screen position in your ROM. This is positioned perfectly well.
Mine is positioned a little bit too low and I simply see the fragment of the screen with the operator name in that gap.
I have that problem only on incoming call screen, dialer is positioned ok.
I tried to compare dialogs from phcanrc.dll you use with the one with my ROM and I see no difference.
Have you ever observed that in your ROMs?
Might it be related to the kitchen I use? I don't think so, but.. when I use osKitchen my ROM boots ok, but when I use EVK my ROM hangs on the first use screen once the progress bar reaches the end.
Click to expand...
Click to collapse
you are using fix from alex this package:
PACKAGE_RHODIUM_S2_Phone_Canvas_Enhancement_Fix_4_ 2_51720111829_0
and you still have the problem???? :S
B16b: unfortunately yes... I applied alex fix, but this solved only scroll bar and softpad overlap but NOT incoming screen position...
maybe you are using dialer from quilin or another? this is not a very big issue, but you know, I'm quite curious how to fix ;-)
anyway, I flashed recent NRGZ28 energy rom and saw that he has the same problem, so maybe this is somehow generic problem...
but at least I have my own 23554 based on EUR stock ROM, quite stable, and only with modifications that I really need and like
best regards b16b!
try putting this pkg to run after your phonecanvas pkg in kitchen.
twopumpchump said:
try putting this pkg to run after your phonecanvas pkg in kitchen.
http://forum.xda-developers.com/attachment.php?attachmentid=303452&d=1270305669
Click to expand...
Click to collapse
I'm trying to open the link but I'm getting info that I've no permission to access this...
you can get it here...
reversmoded your dll and replaced in the phone canvas package but it did not solve the incoming call position.. works the same way as with my previous one...
I use stock Rhodium Phone_Canvas_Enhancement_4_2_51720111829_0 with fixes from Alex. Do you use the same package?
Lissek said:
reversmoded your dll and replaced in the phone canvas package but it did not solve the incoming call position.. works the same way as with my previous one...
I use stock Rhodium Phone_Canvas_Enhancement_4_2_51720111829_0 with fixes from Alex. Do you use the same package?
Click to expand...
Click to collapse
i use the one i gave you, exactly nothing else....thats it.
Problem solved
I have finally solved the problem by disassembling phcanhtc.dll and hex editing the file.
For anybody interested in technical details of the solution:
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Lissek said:
I have finally solved the problem by disassembling phcanhtc.dll and hex editing the file.
For anybody interested in technical details of the solution:
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
glad you got it worked out so is this one better than the one i gave you i guess? ive never noticed having the problem in my rom but i gave you the files i use and they didnt work for you upload the one you modded i want to compare to mine.
twopumpchump said:
glad you got it worked out so is this one better than the one i gave you i guess? ive never noticed having the problem in my rom but i gave you the files i use and they didnt work for you upload the one you modded i want to compare to mine.
Click to expand...
Click to collapse
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Lissek said:
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Click to expand...
Click to collapse
can you do the similar modification on this file from my HD2?
Incoming Call in Lanscape w Rhodium Phonecanvas!
Lissek said:
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Click to expand...
Click to collapse
Just wanted to say thank you. Now have incoming call in landscape with rhodium phonecanvas.
Just use the new Phone Canvas 5
WBR
Siemens Lover
SiemensLover said:
Just use the new Phone Canvas 5
WBR
Siemens Lover
Click to expand...
Click to collapse
I couldnt get landscape to work on that. Did you happen to have landscape working on it?
ai6908 said:
I couldnt get landscape to work on that. Did you happen to have landscape working on it?
Click to expand...
Click to collapse
NO landscape support!
WBR
Siemens Lover
Hi all
I want to port a dialer from the Photon to the Nike or the EzInput from the Rhodium
I was wondering if I can ask from the guru's who port dialers, Sense, etc from 480x800 to 480x640, etc what actually needs to be edited?
I have IDA and Restorator as well as a hex editor. I would like to learn how to go about this and want some help.
I know pcarvalho at one stage was porting the EzInput 2.1 before the MEGA was released - so I know that it is possible, just want to know how.
The main reason for the EzInput is that the Nike has a hardware keypad that doesn't seem to work with any Ezinput other than v1.5 and then there is a 16key version and a 20key version, so the builds are different - just want a more recent one that is QVGA and works with the hardware input also
Reason for the dialer is to correct a few errors in the MEGA dialer (already corrected the incoming call Position - but Call History is an issue) and I believe that V5 Phone Canvas solves this problem - I would also like to look at a more recent 3G dialer, but the only that I can do for that is look at porting one from a different resolution, as there are no recent QVGA ones. Why the Leo never had 3G video dialing is a mystery to me
Is it possible to add Video dialing to a 2G dialer Canvas?
Anyway, I hope someone can assist me to do this, or at the very least point me in the right direction.
Thanks
DT
that is very hard and i dont know how to make it... look at this OEM pkgs i get from LEO to QVGA maybe you can have an idea makin a diference hex edition
+ Que PPC said:
that is very hard and i dont know how to make it... look at this OEM pkgs i get from LEO to QVGA maybe you can have an idea makin a diference hex edition
Click to expand...
Click to collapse
Thanks + Que PPC - I have already ported the power/backlight from the Leo - editing the XMLs is good if the package has them.
I also understand what I am asking is not straight forward; otherwise anyone could be doing it. There are however, those in the XDA community that have the knowhow - I don't mind if the help comes via PM or email so that the inevitable thousand questions and comments aren't there - it is though, something I would like to be able to do, if not just for myself, but to also help the XDA community.
The people with QVGA devices would love to get updated components - the MEGA helped that immensely, but they are still crying out for a decent 3G dialler – I would be able to halve my ROM releases if nothing else with that. I for one want to be able to use a newer Ezinput – one that I can get working with the Nike’s hardware keypad. If that means pain stakingly editing every file in a package, then so be it.
Maybe it is as easy as editing a few XML files with the newer packages – I don’t know, if someone wants to help then I welcome the assistance. We all start somewhere and I wouldn't be able to even cook a ROM if 14months ago people in this community didn't lend their helping hand.
Thanks again, appreciate the input.
DT
Hi
As the title says..
Thanks
Cause they want to...
Cause its the newest...
Cause is the most fixed... (as qvga Mega dialer isnt fixed yet)
Cause users ask them to cook it...
Cuz its fun to use stuff not made for your phone!
What a great question!
IMHO, because it's the most functional dialer and have all you need as a phone dialer. (such as video call support)
It's the most updated dialer that has a 6.5.x fix (that I'm aware of)
TAEL said:
What a great question!
IMHO, because it's the most functional dialer and have all you need as a phone dialer. (such as video call support)
Click to expand...
Click to collapse
Which takes me to my next question... Does it have conference call support??? (I'm not sure if anyone uses this, I don't)
Thanks for the replies guys hahaha
Psyki said:
It's the most updated dialer that has a 6.5.x fix (that I'm aware of)
Click to expand...
Click to collapse
Actually the most up to date is the dialer from the Huashan ROM which is an actual wvga 6.5.x OEM from the com3.2 branch aka 231xx. Only bad thing is the packages are test packages.
Not ALL cooks do that.. I, for example, cook a Rhodium dialer in my Rhodium ROMs.
neither me... cause....
My ressolution Device cant supports that ress... hahahahah i use Mega's and a custom one
NRGZ28 said:
Not ALL cooks do that.. I, for example, cook a Rhodium dialer in my Rhodium ROMs.
Click to expand...
Click to collapse
I do too, except for aku 530X builds, I use Huashan phone canvas.
+ Que PPC said:
neither me... cause....
My ressolution Device cant supports that ress... hahahahah i use Mega's and a custom one
Click to expand...
Click to collapse
me neither
i use a patched blackstone dialer for my wm65x rom ... if you don't use manila in your rom, there are only a few dialers that don't depend on other manila packages
NRGZ28 said:
Not ALL cooks do that.. I, for example, cook a Rhodium dialer in my Rhodium ROMs.
Click to expand...
Click to collapse
Is there a rhodium dialer that works 100% with 6.5.x? (softkey, caller id etc)
There are many fixes for phone canvas and due to many ppl use the htc leo canvas is the most fixed so.. maybe its the most appropiated one for WVGA for now
I have a rhodium WWE.
My phone supports video calling
I tried the Huashan Dialer but only has landscape
Then I tried the Rhodium Dialer (Phonecanvas Something and Video Calling)
Then I tried a Leo dialer.
Im not understanding exactly what I need and whcih Phone canvas to make it work and whats the differences between the dialers.
I See some says Phone Canvas Enhancement @G and anotehr doesnt have the 2G
All i want is i rhodium or whichever other dialer that has video calling and landscape support but dont know what i need from which rom.
If i take the Phone canvasv4.2.517 from Base 210 and Video Telephony v2.5.35575 from the same base it show like a scroll bar on the side. Is that the incall position fix problem or is that something else?
Im using win 6.5.x 21682. Thanx
Ok I figured it all out for now
Edit Solved :
It looks like you only need two packages for a dialer to work.
Video Telephony
Phone Canvas Enhancement
The phone canvas enhancement that has a 2G in the package name doesnt have video calling
The reason I had the problem is that I used Rhodium Dialer v4.2.5127 which is for Windows 6.5 and was cooking 6.5.5
I then had to look for Caller ID fix and Position fix and cooked them both after the dialer and it was all sorted out.
Could you add the answer - for future reference?
Grumps, thanks a million for this thread, this made switching to a rhodium dialer so much easier lol
Thanks a lot, you're a huge help
Regards
Smith
Hallo,
We have in Leo HD2 a Problem with Phone Canvas under Build 231xx or similar new Builds.
The Old Phone Canvas 4.2 (2G) has the Caller ID issue.
The new Phone Canvas 5.0 (3G) from Huashan works OK, no caller ID issue but phone Freezes when answering an incoming call because of the ACTIVE Video Call option.
The new Phone Canvas 5.1 (3G, but the Video Call Option is DEACTIVATED) from Oboe works OK, no caller ID issue, no freezing but no out going calls because of the Dual SIM system of the Oboe Phone.
The new Phone Canvas 5.0 (2G) from Photon works OK, no caller ID issue, no freezing but HVGA (leo is WVGA).
To be edited is the Phcanhtc.dll
One of the Following will solve the Problem:
- Editing the new Phone Canvas 5.0 (3G) from Huashan to DEACTIVATE the video call option.
- Porting the new Phone Canvas 5.0 (2G) from Photon (HDmini) to work in WVGA
That is beyond my knowledge.. plz help editing or point me how to do that.
Attached all the 4 Packages
Thanx in Advance
WBR
Siemens Lover
Still hoping that some one make it real or point me how to do that!
WBR
Siemens Lover
no 1? :-(
WBR
Siemens Lover
I would really like to help you with this as I am suffering with the Phone Canvas on my Leo....
There are a couple of people working on fixes and modifications on this so hopefully soon someone will crack this.
At the moment I am using the Phone Canvas that comes with the latest shipping Leo ROM (3.14) with the cpog.exe & pimstore.dll replacements/fix but it isn't ideal. This combination isn't compatible with the Native VoIP/SIP client so I would really like a 5.0 Phone Canvas that works with the 6.5.3 SYS.
What's annoying is the Huashan Phone Canvas works perfectly on my HTC Blackstone without the cprog.exe or pimstore.dll from older SYS being integrated (apart from the dialpad button but I can live with that...) and I am trying to replace the Blackstone with the Leo....
Here's hoping....
Andy
Yea it will be awesome to make the Huashan dialer work without video call, and fix the landscape as well.
Then we dont need to use the called id fix!!