Hi to anybody who might read this ,i have already searched and only found one post and they went completely off topic
I want to know if there is maybe some way of installing an android rom onto my htc wildfire without rooting (rooting will void the warranty and the phone is like a few days old)
I want to get a different mod because the one i currently have is the stock one and it sucks i have always admired the people of xda for the creativity and knowledge in the roms so please help
Short answer: No
Long answer: Noooooooooooooooooooooooooooooooooooooooooooooooooooooo.
You need to root in order to be able to install any custom rom.
You can always unroot, if you need.
u have my full attention
Alex_GP said:
Short answer: No
Long answer: Noooooooooooooooooooooooooooooooooooooooooooooooooooooo.
You need to root in order to be able to install any custom rom.
You can always unroot, if you need.
Click to expand...
Click to collapse
well if rooting is realy soooooooooooooooo important then could u guide me through this plz and what are the dangers of rooting(bricking etc)
well if you tell us what hboot version you have we might be able to tell you if you can or not by software.
turn off your phone.
press volume down and power on.
release volume down.
then write here what hboot version it is.
but i tell you, if hboot version are 1.01.000x you can't root it by software, and you'll need to get it done by someone that owns an xtc clip (piece of hardware).
But i dont quite get youre statement that there is only one thread about this subject and it goes off topic fast.
I think there are several threads about both rooting, hboot versions and much more. And all stuff that you need to know are actually in there.
Switch off your phone:
Press the volume down button + power.
The Phone will start.
Let us know what you see
Rom 2.2+ <-?
Hboot 1.+ <-?
s-on / s-off <-?
If your rom is 2.2(+/up) you will have the Hboot 1.(+/up) so there is no way atm to root it.
i have the same problem, we have 2 wait
(yes, threre is NO WAY at the moment)
If you have rom 2.1 (and lower) /hboot 0.8 (or something lower than 1.) its possible to root it to use a custom rom.
How to root it / use a custom rom:
Sorry in these Forum are tons of guides
DenKofAnd said:
well if you tell us what hboot version you have we might be able to tell you if you can or not by software.
turn off your phone.
press volume down and power on.
release volume down.
then write here what hboot version it is.
but i tell you, if hboot version are 1.01.000x you can't root it by software, and you'll need to get it done by someone that owns an xtc clip (piece of hardware).
But i dont quite get youre statement that there is only one thread about this subject and it goes off topic fast.
I think there are several threads about both rooting, hboot versions and much more. And all stuff that you need to know are actually in there.
Click to expand...
Click to collapse
hboot ver is 0.80.0008
and s-on
rom version 2.1
tech freak said:
hboot ver is 0.80.0008
Click to expand...
Click to collapse
so its rootable.
http://forum.xda-developers.com/showthread.php?t=824396
use this guide... its pinned on the top of this site
thanx oh and could u tell me what are the dangers of rooting (bricking)
Can we brick it? yes we can
There isnt a guide that makes the rooting / flashing 100% safe
thx alot im checking the guide out now . . . . lol the questions were funny
ill post an update later on thx
tech freak said:
thanx oh and could u tell me what are the dangers of rooting (bricking)
Click to expand...
Click to collapse
if done properly.. the chances of bricking are very less. i ve rooted my phone over 3 times now.
I had a dead row in the lcd so had to get it replaced under warrenty. Installed a RUU and got it under warrenty.
Then rooted again.
The replaced display was dull, not bright enough, installed the RUU and got it replaced again under warrenty.
Then rooted again,
Broke my led. ( was trying the strobe mode in a high brightness led app.. he he)
Installed the RUU and got the led replaced.
Then, Rooted again .
Now i have a feeling the camera is not functioning rite. i see white patches here and there in the images, and the image is not crisp. i can see pixels.. i gues its time for me to RUU again.. he he..
rahulkrathod said:
Now i have a feeling the camera is not functioning rite. i see white patches here and there in the images, and the image is not crisp. i can see pixels.. i gues its time for me to RUU again.. he he..
Click to expand...
Click to collapse
Just how long you've been using your Wildfire? That's a lot of issues.
Been using mine for 5 months and no problems so far except some scratches on the body due to me dropping it violently. Time to RU.. oh wait.
doomed151 said:
Just how long you've been using your Wildfire? That's a lot of issues.
Been using mine for 5 months and no problems so far except some scratches on the body due to me dropping it violently. Time to RU.. oh wait.
Click to expand...
Click to collapse
its been 7 months now. Problem with the dead row was unfortunate, but led was my mistake. i knew high brightness strobe would break it. still i went for it.
and camera, perhaps the service guys mishandled it while fixing the led? or perhaps its just dust inside, thought its not prominently visible.
tech freak said:
thanx oh and could u tell me what are the dangers of rooting (bricking)
Click to expand...
Click to collapse
just remember:
do attempt to flash when your battery is very low
and do not eject the battery while flashing
Moved to general
Related
There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Cool
I posted the question in a wrong area im glad someone with a mytouch tried it i bricked my first mytouch
Worked
This worked for me also I am now on CyanogenMod v3.9.11.2 and it works very well.
TY Cyanogen!
ed
Works...but hesitant
This definitely works on the MT3G just tried it...whew glad it worked Still extremely hesitant on flashing new rom though. Dont know why even though I have a rooted G1. Perhaps I just love this phone too much to f*#$ it up
RyeBrye said:
There was a locked thread in development where someone asked if it would work. A lot of people replied (obviously without even knowing what they are talking about) that it wouldn't work.
it DOES work on the myTouch 3G's - I just did it on one.
It works on any android phone - but the current apk implementation flashes the 1.4 cyanogen recovery image so it only works on phones that image will boot (i.e. the HTC Dream, or the Sapphire... etc)
It's way easier to apply that than it is to apply the nbh downgrade... etc.
Click to expand...
Click to collapse
Now that I think about it...If you just use this to get the recov img the MT3G still has the "perfected" spl. So exactly will this allow you to flash any new ROMs? That is why the "goldcard" was used to trick it and flash to an earlier "non-perfected" spl which would then allow you to flash ROMs updated radio etc etc etc. Shed any light on this?
I know there can be risks when doing any kind of modding/hacking. What is the main risk with rooting the MT3G? Is it mainly an issue with the battery falling out or running out of juice? Or is the rooting process invasive enough (i know it is root = can touch everything) or unstable enough that there is a relatively high probability of an issue running the canned procedure?
I have my phone, love it, my wife would kill me if I wrecked it. I just want to know how likely I am to end up with a brick using this method.
Also a question to understand this procedure, if I run the apk and reboot normally then there is no lasting root, correct? I have to go into the recovery mode and flash over a new rooted rom for root to become permanent? Does this actually change the SPL on the MT3G, does it preserve the ability to flash other roms at any time in the future? I want to know if this is a one time open up your phone for rooting or if after I do this will I always have root.
Sorry for all the questions, but I have been lurking around and haven't found definitive answers to these questions. Thanks!
Dave
Dave, Ive used this method. However if you didnt notice in my previous post...the spl does NOT change. Which is why I questioned the ability to flash any ROMs. The more "complicated" method (http://forum.xda-developers.com/showthread.php?t=547133) requires a "goldcard" with an earlier version of the spl. Which I believe allows flashing to occur.
Yeah, I saw your post after I posted. I think this is great for a simple root I am thinking to have future rooting I will need the goldcard method anyway.
It would seem that this method should be able to modify the SPL since it is able to run as root, maybe not though...
I did mine last night and now doing my wifes MT3G and I was comparing cyanogen's vs stock and its night and day...no loading screen issues with cyan's build and keyboard response got better too...
LOL yeah Ii was thinking about the SPL if we can change it out? I kinda want to call my phone semi-rooted
so anyone flash a new spl/radio using this one click root? success? or no?
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Still waiting on this one also hehehe haven't seen anyone do it yet!
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
bobzoz said:
im debating on getting a mytouch if i can get full root in just a few clicks hmmmm definatley a positive haha. hows the mytouch work in recovery terminal? since theres no hardware keyboard?
Click to expand...
Click to collapse
just use the trackball to select what you want...cant use console though (ALT-X)
Works
bobzoz said:
so anyone flash a new spl/radio using this one click root? success? or no?
Click to expand...
Click to collapse
Just did it...1.33.2005/ also S-off. this is definitely legit and makes things a hell of a lot more easier than all those damn adb commands. Dont get me wrong at all I do appreciate all the work that was done by Haykuro and the other boys because without them Im sure this wouldnt be possible. Anywho...it works.
Okay. As newb as one can get with phone mods, etc. But it actually works. I dont know what the exact benefits of it are but I am running... Mod version CyanogenMod-3.9.11.2 per about phone. All my downloads are gone but it worked. I dont know what the difference/any limitations is for down the road, in comparison to the gold card method (I hope none), with this type of root but hey it actually worked and I would have kick my own a$$ if I bricked my phone. Thanks to folks who found this way and are their any "rooted" differences now that I am on cfw using this method for say updating to cyanogens 4.0 eventual release?
Alright, I took the plunge and it worked flawlessly!
I use the 1 click install via the market app called Recovery Flasher. I installed CyanogenMod 4.0.1 Stable. Zoom zoom zoom...
I thought I may have had an issue when I rebooted after flashing since it sat at the MyTouch 3G splash for a ton longer than normal. I had read it was normal for the first boot to take longer so I didn't freak out and pull the battery. I just let it come up and now I couldn't be happier.
If I remember reading correctly CyanogenMod has the fix for the root vulnerability used in this hack to root plugged. So, now that I have a rooted ROM and recovery 1.4 will I ever need to worry about having the dreaded "Perfect SPL?"
so easy a caveman could do it! a thousand times, thank you.
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
go for it
bobzoz said:
so its confirmed you can FLASH a different SPL with no problem ? cuz if so im gettin a mytouch ! lol
Click to expand...
Click to collapse
go to town boss...now i need to get out of the stupid hero boot loop.
Thanks. I also took a chance since I got my Touch for free by Timo mistake. Couldn't resist. Aside a few apk not able to install everything works fine. Noob question, can I now format sd card?
Oh, thanks for Quick Office.
(usa version 3g) dnt know if that matters! ?
ok, so im gunna root my friends mytouch but i saw on youtube that you can root it with one click... but i wanted to know if it will work with the new update,
http://www.youtube.com/watch?v=7kPgfyGRDHQ
or if you guys can direct me to a link how to root a mytouch 3g bc i looked and i dont NO! nothing about a mytouch and i found different threads, and if you guys can give me a good rom because i dont know wats a good one, ill go with the first person who puts a link to a rom...
please and thankyou =]
pakistaniprince said:
(usa version 3g) dnt know if that matters! ?
ok, so im gunna root my friends mytouch but i saw on youtube that you can root it with one click... but i wanted to know if it will work with the new update,
http://www.youtube.com/watch?v=7kPgfyGRDHQ
or if you guys can direct me to a link how to root a mytouch 3g bc i looked and i dont NO! nothing about a mytouch and i found different threads, and if you guys can give me a good rom because i dont know wats a good one, ill go with the first person who puts a link to a rom...
please and thankyou =]
Click to expand...
Click to collapse
Start by telling us what version of MyTouch you are using.
Original or 1.2/Fender
Is it a 32A or a 32B board?
Binary100100 said:
Start by telling us what version of MyTouch you are using.
Original or 1.2/Fender
Is it a 32A or a 32B board?
Click to expand...
Click to collapse
dont have the phone with me right now, but what is a fender, and 32a.... tell me where i can find it on the phone.... so when i get the phone i can let you know
pakistaniprince said:
dont have the phone with me right now, but what is a fender, and 32a.... tell me where i can find it on the phone.... so when i get the phone i can let you know
Click to expand...
Click to collapse
The Fender/1.2 has the 3.5mm headphone jack on the top.
Before you boot up the device hold the volume down button and press the power button. Keep holding the volume down button while it boots to a screen that will display information. Post that information here to get help.
Wouldn't it be the back and power button at the same time, volume down is when your flashing?
xtheishx said:
Wouldn't it be the back and power button at the same time, volume down is when your flashing?
Click to expand...
Click to collapse
Same thing. Try it sometime.
Power+Home=Recovery
Power+Volume Down=bootloader
Power+Back=bootloader
pakistaniprince said:
i looked and i dont NO! nothing about a mytouch and i found different threads, and if you guys can give me a good rom because i dont know wats a good one, ill go with the first person who puts a link to a rom...
Click to expand...
Click to collapse
So you just admitting to know NOTHING about this phone. A phone that has had a higher brick rate then any other HTC Android device. And you're attempting to do this for a friend? You'd be better off letting your friend do it in case it bricks so it won't be your fault. Either way try these guides
The Unlockr Rooting Fender/1.2
XDA's Guide for unlocking MyTouch 1.2
As for a rom i personally use Dr. Cloverdales Magic Elixir but that's a personal preference.
I still think it's dumb of you to attempt to root without knowledge of the phone. You don't sound to bright but perhaps you'll get lucky and not **** everything up?
Binary100100 said:
Same thing. Try it sometime.
Power+Home=Recovery
Power+Volume Down=bootloader
Power+Back=bootloader
Click to expand...
Click to collapse
Power+Back is fastboot
Power+Volume Down is Hboot
kinda different but still the bootloader.
@OP:
I do not advise rooting or applying ROM's to devices that aren't yours. It is your friend's (and your) responsibility to search and read before undertaking any rooting/flashing of ROM's as you can potentially void the warranty of the device should things go wrong.
Thread closed.
Hello,
I would like little info, here please, i'm interested in rooting, but after reading and watching vids on this im abit confused in which method i should do? i watched a few vids on unrevoked method with nand backups, then read on here how to root aswell.
All im looking for is something little faster and snapper in the phone with a nice ROM.. and not losing front camera
if someone can point me in right direction for the files i need to do this and the best way in doing this without "BRICKING" LoL..
here is my info:
Build # 3.70.651.1
kernal version: 2.6.32.17
Android Version: 2.2
Don't know if need more info,? this is a replacement phone i got lastnight.
Thankyou for reading
I have used unrevoked several times that is what I recommend. Here is the link do the unrevoked forever.
http://unrevoked.com/
Edit: follow all directions read and read agin
localguyincali said:
Hello,
I would like little info, here please, i'm interested in rooting, but after reading and watching vids on this im abit confused in which method i should do? i watched a few vids on unrevoked method with nand backups, then read on here how to root aswell.
All im looking for is something little faster and snapper in the phone with a nice ROM.. and not losing front camera
if someone can point me in right direction for the files i need to do this and the best way in doing this without "BRICKING" LoL..
here is my info:
Build # 3.70.651.1
kernal version: 2.6.32.17
Android Version: 2.2
Don't know if need more info,? this is a replacement phone i got lastnight.
Thankyou for reading
Click to expand...
Click to collapse
All depends on your preference, it's tough to actually brick a phone but permanently wiping out your 4G on the other hand is easy.
See thats what i don't want to do wipe out my 4G even tho we don't have 4G here yet but never know when im in a area that has 4G i wont pick it up.. So what or which method should i do? so everything goes easy and right? Thanks
Restart your phone into the bootloader to find out what HBoot version you have. This can be down by holding the volume down key. If its 2.10, like mine, you can easily root by going here and downloading this item and here to download this item. Install the hboot drivers first then just run the recovery download.
As far as I know, rooting won't kill your 4G but flashing a ROM that doesn't support it will.
Yes it says 2.10.0001
lol hit the wrong button and clicked thanks. Oh well.
Just do what I said then. It took me all of 50 mins for the whole rooting process. Mostly because it took a while to install the HBoot drivers. Couldn't find my phone on the device manager until I realized my external HDs were causing problems with it.
localguyincali said:
See thats what i don't want to do wipe out my 4G even tho we don't have 4G here yet but never know when im in a area that has 4G i wont pick it up.. So what or which method should i do? so everything goes easy and right? Thanks
Click to expand...
Click to collapse
I've had mine since release and haven't had any trouble with it but many have had theirs wiped just by trying to root. I can't say for sure what exactly causes it but I've never used unrevoked and I've always used amon ra's recovery.
Sent from my PC36100 using XDA App
Hi, my phone now is working and all ( the is it bricked post) Thanks guys
Here is the new problem...I would like to go to 2.2.1 ( the passimg.zip is 2.2) is there a way to update without unlocking bootloader.
I tried Androot and superoneclick....Androot gives me the Fugu message and SuperOneClick says its Rooted...but when I go to rom manager or other apps that need superuser...
I get this message : An error occured while attemting to run privileged commands!
So basically Root isn't working.
Also, when trying to install Cyan cm6...Rom manager reboots...but I get the Triangle with the exclamation point with the green man next to it...
Is it still possible to have my cake and eat it? ( locked phone, with root access so I can install modded roms)
Again...can someone help me with this
Thanks!
You didn't have to make a duplicate post. I already answered one of your questions in the other thread.
Dont make another post next time...
I rooted FRG83D with superoneclick root, But if its not working for ya you will have to unlock the bootloader via fastboot. Then push a custom recovery. With the recovery you can install the su binaries.
Manual root:
http://www.nexusoneforum.net/forum/...mple-sdk-setup-manual-root-guide-windows.html
Sent from my Nexus One using XDA App
Ok i'll only answer here now for this question:
I don't want to loose my warranty. Hence the softroot way.
I thought of something dunno if its possible:
is there a stock FRG83 image like the FRG33 I just installed....maybe 2.2.1 will be compatible with androot or superoneclick
Thanks
You need to do a few things before you go any further. There are key steps you are leaving out that are just a recipe for disaster. I'll detail them below, in the specific order you should follow them. There shall be no deviation from this list.
1 - Put your phone down. Seriously, stop messing with it. Just quit.
2 - Read the Wiki that you've been linked to, in both threads, several times.
2a - Now that you've read the Wiki, really read the Wiki. Yeah, you skimmed it the first time, I know you did.
2b - Now go read it again. I'm sure you'll notice something new this time.
2c - Now go read the links in the Wiki. Explore those threads.
2d - Those threads that the Wiki links to? They have links in them. Go read those.
3 - Rinse and repeat all steps from 2a to 2d for, oh, about 4 days. During this time you are allowed:
To post general chit chat on the forum. No technical stuff, no help threads, no questions. Just read. If you have questions, you need to read some more.
No more than 3 app installs per day, from the market. Thou shalt not download and install any APKs from any source that is not the Android Market.
To tweak settings on your phone, provided those settings are all done via the touchscreen on your phone. You shall forget the acronym "ADB".
Once you've done that, you'll root your phone in no time, and you won't be worried that you've bricked it. Then, and only then, can you start asking questions.
Why? Because all of your questions right now are answered. You're jumping the gun, and it's obvious you haven't done much research at all. Seriously, go read.
I hate to be mean, but if you want to understand stuff, you need to try and understand it on your own first. You're here looking for solutions (that are already spelled out) to problems that you created (because you didn't read anything). Quit looking for the easy way out. If you want to enjoy your phone and the features of what you're trying to accomplish...put some work in yourself, and stop expecting everyone else to fix everything and spell it out. People here are more than happy to help, but you gotta start helping yourself.
@Soberguy: Thumbs up to you. Couldn't have said it any better.
musashiken said:
@Soberguy: Thumbs up to you. Couldn't have said it any better.
Click to expand...
Click to collapse
Thanks, mate. Didn't mean to quote the guy above me, just noticed I did that. Fixed it.
I'm amazed at the patience some folks have. Maybe it was my rough 3 day weekend that's left me a bit short... Appreciate the thanks, all the same.
Ok, I do go a bit fast.
I'll read...it just that I tried the cm7 mod ( i know its experimental) and the phone
would'nt boot.
With the help of the great people on the board, I got my phone working again but on FRG33 (2.2)
My last question was if it was possible ( or someone knows of because Ive checked the net) to root without unlocking ( androot and superoneclick that i know of) if I have FRG33 ( Because Ive been getting permission errors)
Finally, I wanted to know if a FRG83 stock image was available so that I could recover to it without unlocking bootloader. (or any other stock that lets me root without unlock)
I'll unlock the phone as a last option...I'm sorry...And if anyone is pissed at my posts ...well sorry I just taught some of you experts could help.
pooky2010 said:
Ok, I do go a bit fast.
I'll unlock the phone as a last option...I'm sorry...And if anyone is pissed at my posts ...well sorry I just taught some of you experts could help.
Click to expand...
Click to collapse
See? Looking for the easy way out again.
It's not about anyone being pissed or short on patience. Look at how frustrated you are with the situation. You're frustrated. Why? Cause you did it wrong. Why? Cause you didn't read enough first. Even after several suggestions, you still want it done, with help, right now, or you'll sulk about someone pissed and how no one held your hand through it.
Is it possible to do what you want? Absolutely! Pretty easy, too. But if you read and help yourself, you'll better understand how to update in the future, as well as how to root the future update. Or, you'll learn how to root what you have, and flash a pre-rooted stock ROM (yes, those are here as well).
So call me an ass, cool. You did in your mind, that's fine. But really, I'm trying to let you know what will help you the most, and that's having a better understanding of how to prevent a boot loop in the future, or at least how to fix it if it happens. Best of luck, man.
Sent from my Sexy Nexy, courtesy of the fine developers of Tapatalk
Here's the deal.
I did a one click root without unlocking the bootloader. Then I installed rom manager and flashed clockwork recovery. Then I did a backup ( both done in rom manager) then I went back into rom manager and installed cyanogenmod 7 and my nexus is now haxored gingerbread. Make sure you do a full wipe before flashing new roms and it'll always work.
I didn't update my radio, my hboot or anything like that. And it all just works and is dead simple. I would suggest trying z4root or universal androot and then downloading rom manager from the market.
How you managed to **** up something so simple is pretty funny dude.
I'm using an at&t band n1 with an smiled. Not the one with super LCD. I heard a rumor that the super LCD n1s have problems with certain mods. You might want to figure out what type of screen you have too.
The cyanogenmod wiki at cyanogenmod.com might help you too.
Sent from my Nexus One using Tapatalk
OP, you have to learn the hard way. Stop using "newbie" as an excuse.
I was also a "newbie" when I first got my Nexus One in February. Everything about android was new and alien to me. It actually took me a couple of months of lurking in xda and reading up on tutorials before I took the plunge to rooting my phone. And I did not bother anyone on that. I made sure I understood the steps and triple checked every move I made in following instructions even though I did not understand them.
I also was worried about warranty and actually did the manual way of rooting my phone without unlocking the bootloader using some method that involved cutting a piece of plastic from my battery. That was nerve wrecking and no where as simple as the superoneclick thingy you have now. Yet I survived and I did it on my own.
I must admit that you have to be a little bit confident in using computers and have some basic knowledge of typing commands in cmd. But everyone has to start from somewhere.
Seriously if it's too much trouble or too complicated, maybe staying stock or going Iphone is a more comfortable alternative.
I'm actually pretty good with computers...
Also, I have bricked 4 phones (the provider took them back) fooling around...
I could brought this one back ( they didnt check). But I want to learn...I'm pretty impulsif...Anyway so far
With FRG33 z4root works (read thanks)
Now I trying to flash clockwork...( when I download cyan 6 +google apps) it reboots but I get the triangle thingy...I click power volume up ( read that thanks) I get a blue menu...I kinda scared to click an option so I rebooted...I'm trying to use rom manager for updates because its really simple ...anyway
Thats it for tonight All of you guys are nice dudes and I'll learn and will try to help im my own way...I know I'm a newbie that likes short cuts (hell I read all day at my day job...lol) This is fun ( playing with male toys)
Thanks guys!
Hello everyone
I just bought a used HTC Dream G1, before that i had a Blackberry 8310 and before that an HTC TyTN.
The G1 i just got is kinda slow...It's using the cyanogen mod and i wish to install a newer and hopefully faster operating system on it.
I really need help, like step by step help and i am willing to provide any info you might require in helping me.
Thanks ahead, much appreciated
EDIT:
just some info on the phone/operating systen
Android version: 2.2.1
Kernel version: 2.6.35.7-cyanogenmod
mod version: cyanogenmod-6.1.0-RC1-DS
build number FRG83
ok sounds good, first thing you need to do is power off your device, than reboot holding the camera+power buttons untill you the 'Bootloader' screen...
On there you will find the provided information we will need to know what the next step is for you
If i dont reply back fast enough and you feel crazy enough to try this on your own, a good place to start is in the guide provided in my signature! Helps you root, un-root and many other things... also may give you a little better understanding of how things work for the device..
anyway, depending on your radio and spl is how we know what you need to do next so get that information for us and im sure we can all help you.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA11000)
CPLD-4
RADIO-2.22.19.261
Apr 20 2009, 15:30:43
that's all that the screen had to show, there was also an "hboot" button and a <back> FastBoot Mode button.
tried reading about it all a bit, but it seems far too confusing...doesnt seem even remotely similar to how my old hermes used to get flashed...
lol ok, well if thats your phone stats and you say you have cyan running that means you have the minimum rooting done, so your next step is to find out what you would like to do? there are many older roms you can flash that are compatible with your radio/spl.... but they are old...
or you can take the next step and upgrade your radio and spl to flash the latest roms... which kick ass for todays standards of the G1...
basically what you want to do is pick up on step 1 of that guide to flash the 'Danger spl', than continue on with the radio's and hboot files untill your device is at 2.22.28.25 and 1.33.0013d
if you need any help on the proccess let me know, before you cause any harm (bricking) your device... first things first!!! is your g1 a US or UK model?
hmmm...i'm not sure actually, it has a T-Mobile logo on it...
any way for me to check?
uhhhhmmmm im not sure exactly... google? lol i have the US model and it also says tmobile across it... but i dont want to assume you have us, so just check that and let me know... i can help you if its a us model lol
I think i figured out a way to figure it out (that sounded weird)...
Does your phone have a QWERTY keyboard or a QWERTZ keyboard?
Did a little poking around, and since my G1 has a QWERTZ keyboard, i guess it comes from germany and when i did a hard reset to day it reverted to german language, so i'm pretty sure it's german
ooo yup ok thats def not us model lol uhhhmmmm i know with rooting and stuff there are some files on my guide that shouldn't be flashed on your phone... im sure there's many guides out there to help you though... you still want the same goal, which is radio 2825 and spl 0013d, so than you can flash good roms
Thanks for the help
I'll give it a go tomorrow seeing as how it's 4AM right now
k, if you need help let me know
Hello there,
just wanna ask if you have upgraded already your radio and spl? i have the same info on my G1 as yours, im afraid to brick my phone, since i once brick another G1 already
Nah, i haven't done it yet, i'm too scared of bricking the thing. But i'll be sure to post in this topic if i do get the courage to do it.
Damn...i still don't know which rom/other things i'm suppose to use...anyone wanna help?
@jhenards: well, it turns out that i didn't need to update my radio or SPL. I just needed to flash a new ROM on it.
I'll link you to the tutorial i used.
Before you do anything else, make a backup in Titanium Backup so you can just restore your apps later.
Also make one in Nandroid (here's a tutorial for that http://wiki.cyanogenmod.com/wiki/Howto:_Using_the_Recovery#NANDroid_backups)
Download Cyanogenmod 6.1.0DS ==> http://goo-inside.me/cm/dream_sapphire/stable/update-cm-6.1.0-DS-signed.zip
Download Google Apps (tiny) ==> http://goo-inside.me/gapps/gapps-mdpi-tiny-20101020-signed.zip
Then flash those using this tutorial ==> http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Installing_CyanogenMod_5+#Installing_CyanogenMod_ROM
And after everything is done restore your backups using Titanium Backup and use this tutorial to make your phone very very fast:
http://nctritech.wordpress.com/2010...rmance-no-swap-compcache-or-10mb-hack-needed/
That's how i did it
if you dont upgrade your radio/spl then you should consider either super d or super e, they dont get much better than these with the older combo
also try super csdi and even though lots of people disagree, there are some nice sense roms out there that run pretty fast and stable on the older radio/spl
but if your ready to update there is a ton of awesome roms out there that will bring the g-1 back to life!
good luck!
You should definitely upgrade your radio and spl.it gives you more ram to work with,how can you go wrong with that when all you want is a faster phone. But do take your time with the learning curve
Sent from my Froyo on Sapphire using XDA App
z0k said:
You should definitely upgrade your radio and spl.it gives you more ram to work with,how can you go wrong with that when all you want is a faster phone. But do take your time with the learning curve
Sent from my Froyo on Sapphire using XDA App
Click to expand...
Click to collapse
I agree. I bricked mine getting in a hurry with excitment!;p I was able to fix with a new mother board. Now I sport a rooted g1with hboot 1.33.0013d radio 2.22.0013d and a rooted mt4g.
Sent from my HTC Mytouch 4G using xda premium
Unfortunately my G1 died...and no, i did not brick it, the phone was running amazingly fast...until some idiot raced through a puddle (read lake) next to me and got both the phone and me soaking wet...so now the phone can't read the microsd (which works perfectly when i plug it into my computer) and it's stuck looping the CM logo...which means it can't boot.
u2020bullet said:
Unfortunately my G1 died...and no, i did not brick it, the phone was running amazingly fast...until some idiot raced through a puddle (read lake) next to me and got both the phone and me soaking wet...so now the phone can't read the microsd (which works perfectly when i plug it into my computer) and it's stuck looping the CM logo...which means it can't boot.
Click to expand...
Click to collapse
toss it in a bowl of dry rice for a bit and home you luck out