Wildfire S have HVGA screen. We have original dump Rom from htc. Who can port this to HERO??
http://forum.xda-developers.com/showthread.php?t=976423
krysiak115 said:
Wildfire S have HVGA screen. We have original dump Rom from htc. Who can port this to HERO??
http://forum.xda-developers.com/showthread.php?t=976423
Click to expand...
Click to collapse
Thats interesting.
I'm not good at porting whole ROM, I hope some devs will be interested in that.
whitealien said:
Thats interesting.
I'm not good at porting whole ROM, I hope some devs will be interested in that.
Click to expand...
Click to collapse
But we don't have fully working .35 kernel for hero ;/
krygo said:
But we don't have fully working .35 kernel for hero ;/
Click to expand...
Click to collapse
soooooooo?.....
We already have gingerbread up and running with the .29 kernel if I'm right? It's fully functional, so the kernel shouldn't be a problem I think.
Sense is a pain in the ass to port since everything is closed source with Sense so it is a huge undertaking. Not to mention the Hero doesn't have many devs to begin with and the most active one (Feeyo) doesn't port Sense.
Villainrom are trying to fix the camera on 2.2 sense so i can see them porting this in the future.
After all they did fix camera on 2.2!
Villain is doing so, and well a dev on cronos is doing the same thing. And again we got 2 fronts doing the same thing XD....
They could possibly do it as a TEAM but i cant see that happening tbh
im working on this, not yet got the rom to boot and it may be quite difficult due to kernel, i believe its not a requirement for 2.6.35 kernel, minimum that should work fully is 2.6.32, i will post a test release once i have it booting
That would be huge! Fingers crossed good luck
Sent from my Hero using XDA App
RaiderX303 said:
im working on this, not yet got the rom to boot and it may be quite difficult due to kernel, i believe its not a requirement for 2.6.35 kernel, minimum that should work fully is 2.6.32, i will post a test release once i have it booting
Click to expand...
Click to collapse
Thanks for working on it.
RaiderX303 said:
im working on this, not yet got the rom to boot and it may be quite difficult due to kernel, i believe its not a requirement for 2.6.35 kernel, minimum that should work fully is 2.6.32, i will post a test release once i have it booting
Click to expand...
Click to collapse
this is gud to hear. really looking forward to see what happens. two years after the phones was released and its still alive and kicking.
great news!!!!
Are the binaries in this ROM compatible with hero? Surely they will all be ARMv7?
Are the binaries in this ROM compatible with hero? Surely they will all be ARMv7?
Click to expand...
Click to collapse
WILDFIRE S have MSM7227 600mHz this is ARMv6.
wildfire cpu >= cpu hero
Ok if that is the case, I really think HTC failed there XD
Yeah, that's a fail from HTC...
A new device running on something < ARMv7
Meh, gives RaiderX something to do
pulser_g2 said:
Yeah, that's a fail from HTC...
A new device running on something < ARMv7
Meh, gives RaiderX something to do
Click to expand...
Click to collapse
You sure love to give work to someone
krysiak115 said:
WILDFIRE S have MSM7227 600mHz this is ARMv6.
wildfire cpu >= cpu hero
Click to expand...
Click to collapse
Isn't that the same/similar processor to the Legend IIRC?
k0zmic said:
Isn't that the same/similar processor to the Legend IIRC?
Click to expand...
Click to collapse
Yups. Legend and buzz/wildfire are quite similar
Related
The FPS is obviously capped again in Froyo. Is there a kernel to unlock it anywhere yet? I know it just came out, but I just wanted to make sure I wasn't missing anything.
Thanks.
This one works, but it does break the rear camera. I'm using 3.7.3c
http://forum.xda-developers.com/showthread.php?t=726854
Edit: not sure if works with Fresh 3.0, but it does work with the 2.2 Rom netarchy released.
vinscuzzy said:
This one works, but it does break the rear camera. I'm using 3.7.3c
http://forum.xda-developers.com/showthread.php?t=726854
Edit: not sure if works with Fresh 3.0, but it does work with the 2.2 Rom netarchy released.
Click to expand...
Click to collapse
Thanks. I'll wait.
there won't be a complete fix until HTC releases the new kernel source that's in Froyo (kernel .32)
jblazea50 said:
there won't be a complete fix until HTC releases the new kernel source that's in Froyo (kernel .32)
Click to expand...
Click to collapse
Is that the update that comes out on Tuesday? I'm confused.
jblazea50 said:
there won't be a complete fix until HTC releases the new kernel source that's in Froyo (kernel .32)
Click to expand...
Click to collapse
The original "fixes", like the one done by ffolkes, were implemented before the source was released. Let's hope we won't have to wait too long.....
I was wondering when the 2.6.32 desire kernal will be in any ROM's? I'm trying to work on it now but having trouble in Ubuntu. Anyone got any ideas?
adam29617 said:
I was wondering when the 2.6.32 desire kernal will be in any ROM's? I'm trying to work on it now but having trouble in Ubuntu. Anyone got any ideas?
Click to expand...
Click to collapse
Do you have a link to this source for this kernel that you are referring to?
gnarlyc said:
Do you have a link to this source for this kernel that you are referring to?
Click to expand...
Click to collapse
Direct from HTC, http://developer.htc.com/ ? Problem is, the real "Desire" isn't very similar to the Eris other than the old codename that HTC gave the Eris model, "Desirec".
More from Google, including a lot here at XDA.
Would it be from this post? http://forum.xda-developers.com/showthread.php?t=696846
Sorry, little slow today I guess lol
I want .32 D: lol
Hungry Man said:
I want .32 D: lol
Click to expand...
Click to collapse
+1
10chars
+2
10 chars
Sent from my nonsensikal froyo using XDA App
Excuse my ignorance, but what is the advantage of this newer kernel? Do we even need it now that we have everything on our devices working on the .29 kernel?
Some think it's best (or reqd) to have the latest.
Sent from my CyanogenTazz Froyo using XDA App
We don't "need" it but it will be more streamlined to work with froyo. Instead of having a million work arounds to get something like facebook syncing to work things will work by default. I've said it forever, the biggest thing for our phones is updating kernels.
Is it possible to port Froyo From HTC Wildfire to HTC Legend, since they have similar hardware structure?? Yesterday leaked RUU Froyo rom from Wildfire, and today is rooted and everything, so I'm postin here the link to rooted version, and I hope that this maybe help devs to port froyo rom with htc sens to legend, since many users are waiting to such rom .
http://forum.xda-developers.com/showthread.php?t=761927
Froyo is allready ported on Legend ...
http://forum.xda-developers.com/showthread.php?t=776901
http://forum.xda-developers.com/showthread.php?t=749919
Possible? Yes.
Worth-while? I don't think so.
With old Legend's kernel it could work but with Wildfire's new one I doubt. Processor is different, touch-screen too (resolution).
Grafx porting is trivial but would be painfully long-lasting...
Will take a quick look at it...
I dn't see the interest to port the HTC Wildfire Rom to legend ?! ...
LilNes said:
Froyo is allready ported on Legend ...
http://forum.xda-developers.com/showthread.php?t=776901
http://forum.xda-developers.com/showthread.php?t=749919
Click to expand...
Click to collapse
Ohw thanks for blessing me with that... I've been using Azure for mor than a month so it is not new to me. But some people really prefer Sense, I'm not one of them, I've just pointed out that there maybe is a possibility of porting it to legend, since HTC update service is very useless to legend.
@Blayo
Ohw I see now that resolution really is different, I wasn't paying attention on that .
hummm Sorry I misunderstood =)
I think that´s a great idea.
I am using now Azure 1.0.1 and work´s really fast but i prefer sense.
I have ported it.. 1. Problem: need to fix touchpad to get it working.. booting is fine.. 2. Need to see if resolution can be fixed..
Sent from my Legend using XDA App
whitetigerdk said:
I have ported it.. 1. Problem: need to fix touchpad to get it working.. booting is fine.. 2. Need to see if resolution can be fixed..
Click to expand...
Click to collapse
Great I'm sure some dev could help you with this problems. Maybe you can get some helpfull stuff out of Azure rom, sinced it is based on froyo, or ask Ali Ba for some advice. Good luck fixing it!
whitetigerdk said:
I have ported it.. 1. Problem: need to fix touchpad to get it working.. booting is fine.. 2. Need to see if resolution can be fixed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
So far so good! Is it confirmed if the ROM has JIT and all other Froyo goodness enabled?
Great new.
Can´t wait to test it.
Thanks whitetigerdk!!!
whitetigerdk said:
I have ported it.. 1. Problem: need to fix touchpad to get it working.. booting is fine.. 2. Need to see if resolution can be fixed..
Click to expand...
Click to collapse
About resoultion, I guess changing LCD density in build.prop wouldn't help? Default value for legend is 160.
krasenk said:
So far so good! Is it confirmed if the ROM has JIT and all other Froyo goodness enabled?
Click to expand...
Click to collapse
Only what the thread for Wildfire says.. about the port it can't be tested since the touchpad doesn't work..
Sent from my Legend using XDA App
I'm pretty sure the touchscreen will never work, as you have to apply patches to the source code before it is compiled for it to work on the legend :/
Grab a Legend's 2.6.29 kernel from your 2.03.405.3 ROM. You have nothing to loose.
Android powah!
MichaelAlexanderBull said:
I'm pretty sure the touchscreen will never work, as you have to apply patches to the source code before it is compiled for it to work on the legend :/
Click to expand...
Click to collapse
Patch the kernel or some android stuff?
Sent from my HTC Legend using XDA App
Someone with the knowledge should add the kyosa touchscreen patches to get this working. Would be great.
If a rom leaked to the wildfire I hope they will leak one for the legend too. Would be a treat.
The wildfire has already came out with froyo in china,then the RUU leaked. There is no official froyo rom from htc, so it is hard to believe it will leaked.
Sent from my Legend using XDA App
Liquid211 said:
If a rom leaked to the wildfire I hope they will leak one for the legend too. Would be a treat.
Click to expand...
Click to collapse
If they are not preparing one, there's nothing to be leaked.
qzem said:
The wildfire has already came out with froyo in china,then the RUU leaked. There is no official froyo rom from htc, so it is hard to believe it will leaked.
Sent from my Legend using XDA App
Click to expand...
Click to collapse
Some time ago I read a news about htc legend in china, and it also should come out with froyo, am I wrong?
Didn't see it here so I thought I'd post a link. Can't wait.
http://www.androidcentral.com/cyanogenmod-6-t-mobile-mytouch-4g
Sent from my HTC Glacier using XDA App
Exciting news. Thanks for the link.
Yea, woke up today to find mt4g on clockwork recovery and kmobs twitter pic of a booted, yet very broken cm6. Thus begins the flashwars! All during the black ops release lol.
I'm so ready for this.
I'm permrooted, have custom recovery installed, made a nandroid backup, now all I need is this.
Waiting patiently.......
Amazing news, hopefully they remap the Genius button to Search in that rom.
This right here is one of the reasons im getting rid of my vibrant.
Anyone else notice that its using the stock kernel?
grankin01 said:
Anyone else notice that its using the stock kernel?
Click to expand...
Click to collapse
I don't think that kernel source is available yet for the MT4G.
shineproductions said:
I don't think that kernel source is available yet for the MT4G.
Click to expand...
Click to collapse
Oops, your right its not. I haven't had my Red Bull yet this morning!
shineproductions said:
I don't think that kernel source is available yet for the MT4G.
Click to expand...
Click to collapse
Would the kernel source for the mt4g be required to get C6 running? Or, would it be required in order to run C6 optimally?
floepie said:
Would the kernel source for the mt4g be required to get C6 running? Or, would it be required in order to run C6 optimally?
Click to expand...
Click to collapse
You use kernel source in order to compile a new kernel, although you can still create modded ROMS that use the stock kernel, and you can also create kernel modules to add functionality, until you have access to kernel source.
just when I thought this phone didn't need root. CM pops up his head.. damn it here we go again... Flash flash flash
shineproductions said:
You use kernel source in order to compile a new kernel, although you can still create modded ROMS that use the stock kernel, and you can also create kernel modules to add functionality, until you have access to kernel source.
Click to expand...
Click to collapse
Is that why we don't have overclock ability yet. The G2 processor is kicking our buts. (Keeping it P.G.)
Sent from my T-Mobile myTouch 4G using Tapatalk
Be patient. You'll get bacon bits as soon as kernel source is released.
Niiiice, I am so stoked...
option94 said:
This right here is one of the reasons im getting rid of my vibrant.
Click to expand...
Click to collapse
Lol beat you to it ;-)
Sent from my HTC Glacier using XDA App
option94 said:
This right here is one of the reasons im getting rid of my vibrant.
Click to expand...
Click to collapse
according to this, they will support vibrant:
http://www.cyanogenmod.com/home/whats-up-with-cm
this is what i was waiting for...had CM on my original mytouch, moved up to the 4g and have been waiting...
Definitely excited for this! I'm no sense hater but it is no CM for sure.
Sent from my HTC Glacier using XDA App
I would love to see some customized build for this thing that would keep some of the Espresso things or, better yet, keep HTC framework optimized with CM goodies. This way we can just push things we like to it.
so since the 2.3 sdk was released today just wondering if anyone is starting on building a rom for the mytouch. maybe even with a few tweaks like adding the overclock to 1.7.
As far as I know the SDK is usually never enough to build a stable rom.
Considering that we don't even have a stable froyo rom yet, I think gingerbread is quite a ways away.
daewond3r said:
As far as I know the SDK is usually never enough to build a stable rom.
Considering that we don't even have a stable froyo rom yet, I think gingerbread is quite a ways away.
Click to expand...
Click to collapse
its true the sdk is not close to being a stable rom its just an Android emulator
daewond3r said:
As far as I know the SDK is usually never enough to build a stable rom.
Considering that we don't even have a stable froyo rom yet, I think gingerbread is quite a ways away.
Click to expand...
Click to collapse
Iced Glacier is a stable froyo rom.
contractcooker said:
Iced Glacier is a stable froyo rom.
Click to expand...
Click to collapse
+1 I agree with this guy!!
daewond3r said:
As far as I know the SDK is usually never enough to build a stable rom.
Considering that we don't even have a stable froyo rom yet, I think gingerbread is quite a ways away.
Click to expand...
Click to collapse
What do you call the stock ROM?
Joeyc118 said:
so since the 2.3 sdk was released today just wondering if anyone is starting on building a rom for the mytouch. maybe even with a few tweaks like adding the overclock to 1.7.
Click to expand...
Click to collapse
need the source to drop into the git before you will see true usable gingerbread roms... which will probably be a few weeks.
contractcooker said:
Iced Glacier is a stable froyo rom.
Click to expand...
Click to collapse
Ice Glacier has made this phone a beast and is stable with great support.
Sent from my HTC Glacier using XDA App
Gingerbread has landed
slhpss said:
need the source to drop into the git before you will see true usable gingerbread roms... which will probably be a few weeks.
Click to expand...
Click to collapse
Gingerbread just hit the repositories, let the festivities commence
MIUI rom and the port from the desire z by evil d is very stable for the mt4g and so is cyanogen 6.1.2... super smooth